Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] I. Rodr?¡guez, M. J. Barnes, T. Fowler, G. Ravida, and F. Toral, “Design, Manufacturing and Testing of the CTF3 Tail Clipper Kicker”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPD087, pp. 3299-3301.
[n] R. Kustom, A. Nassiri, K. J. Suthar, and G. J. Waldschmidt, “Dielectrically-Loaded Waveguide as a Short Period Superconducting Microwave Undulator”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 897-900. doi:10.18429/JACoW-NAPAC2016-WEPOB07
[n] H. Wang, J. C. Gallardo, and R. B. Palmer, “Short-Range Wakefield in a Flat Pillbox Cavity Generated by a Sub-Relativistic Beam Bunch”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPAH078, pp. 3024-3026.
[n] P.-Y. Beauvais et al., “Studies on Halo Formation in a Long Magnetic Quadrupole FODO Channel First Experimental Results”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAG07, pp. 3173-3175.
[n] F. Lucas Rodriguez, “Estimation of the Response Time and Data Flows in the TOTEM DCS”, in Proc. PCaPAC'10, Saskatoon, Canada, Oct. 2010, paper THPL021, pp. 171-173.
[n] F. Roncarolo et al., “Commissioning the New CERN Beam Instrumentation Following the Upgrade of the LHC Injector Chain”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 976-979. doi:10.18429/JACoW-IPAC2021-MOPAB316
[n] J.-L. Vay, J. Qiang, J. F. Amundson, E. G. Stern, Z. Li, and C.-K. Ng, “Needs and Considerations for a Consortium of Accelerator Modeling”, in Proc. HB'14, East Lansing, MI, USA, Nov. 2014, paper TUO2LR01, pp. 175-177.
[n] S. Peggs, J. Wei, and R. Gupta, “Magnetic Correction of RHIC Triplets”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 258-261.
[n] Z. M. Dai, D. G. Li, Y. Xu, X. F. Zhao, and Z. Zhao, “Harmonic Operation of the SDUV HGHG-FEL”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper MOPP021, pp. XX-XX.
[n] V. Kashikhin, J. Strait, and A. V. Zlobin, “2nd Generation LHC IR Quadrupoles Based on Nb3Sn Racetrack Coils”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPKF073, pp. 1774-1776.
[n] M. Fouaidy, T. Junquera, and S. Bousson, “Field Emission Investigation in a 3.6 GHz SRF Cavity using X-Ray Measuring Systems”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper SRF95C03, pp. 373-377.
[n] K. Yokoyama et al., “Development of a C-band Accelerating Module for SUPERKEKB”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper MOP31, pp. 108-110.
[n] B. Podobedov et al., “X-ray beam position monitor with pixelated GaAs detectors for high-power synchrotron radiation beams”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper MOPS064, unpublished.
[n] A. He et al., “Simulation Design of a Low Energy Bunch Compressor with Space Charge Effect”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWA091, pp. 2307-2309.
[n] B. Podobedov, H. Witte, and M. Blaskiewicz, “Eddy current shielding of the magnetic field ripple in the EIC electron storage ring vacuum chambers”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 246-249. doi:10.18429/JACoW-IPAC2024-MOPC77
[n] S. A. Belomestnykh, R. P. K. Kaplan, J. J. R. Reilly, and V. Veshcherevich, “Instability of the RF Control Loop in the Presence of a High-Q Passive Superconducting Cavity”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAT038, pp. 2553-2555.
[n] V. P. Yakovlev, I. K. Drozdov, I. G. Gonin, N. Perunov, and N. Solyak, “Low-Beta Structure for High Energy Part of Project X”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP063, pp. 972-974.
[n] F. E. Mills, “Beam Loading”, in Proc. LINAC'62, Long Island, NY, USA, Aug. 1962, paper C-07, pp. 283-288.
[n] Z. Zhao, Y. Xu, and H. Li, “Preliminary design of insertion devices at Hefei Advanced Light Facility”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1247-1249. doi:10.18429/JACoW-IPAC2023-MOPM115
[n] N. Pichoff, D. Uriot, W. Braeutigam, and Yu. Senichev, “The ESS-CONCERT Funnel Line”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH098, pp. 3906-3908.
[n] M. S. Dmitriyev, M. V. Dyakonov, S. A. Tumanov, and M. I. Zhigailova, “DC Break Design for a 2.45 GHz ECR Ion Source”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3064-3065. doi:10.18429/JACoW-IPAC2021-WEPAB190
[n] Y. Kato, T. Iida, and F. Sato, “New Dual-Type Electron Cyclotron Resonance Ion Source for Universal Source on Synthesized Ion Beams”, in Proc. HIAT'15, Yokohama, Japan, Sep. 2015, paper WEPB21, pp. 241-243.
[n] Y. H. Xie, C. D. Hu, C. C. Jiang, L. Z. Liang, S. Liu, and Y. L. Xie, “Analysis of Beam Quality Optimization of Bucket Ion Source”, in Proc. Cyclotrons'10, Lanzhou, China, Sep. 2010, paper MOPCP047, pp. 147-149.
[n] M. M. Paoluzzi et al., “Design of the New Wideband RF System for the CERN PS Booster”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 441-443. doi:10.18429/JACoW-IPAC2016-MOPMW024
[n] W. Kaabi, H. Jenhani, G. Keppel, V. Palmieri, and A. Variola, “Titanium Nitride Coating as a Multipactor Suppressor on RF Coupler Ceramic Windows”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5PFP004, pp. 1991-1993.
[n] B. Podobedov et al., “Novel X-ray Beam Position Monitor for Coherent Soft X-ray Beamlines”, in Proc. FLS'23, Luzern, Switzerland, Aug.-Sep. 2023, pp. 241-244. doi:10.18429/JACoW-FLS2023-TH3B2
[n] J.-P. Auclair, P.-A. Chamouard, and J.-L. Lemaire, “Limitations and Improvements of Heavy Ion Acceleration with a 20-MeV Proton Linac”, in Proc. LINAC'79, Montauk, NY, USA, Sep. 1979, paper S1-11, pp. 43-46.
[n] I. Sato et al., “Beam Monitor Utilizing Transition Radiation”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2516-2519.
[n] Y. Kato, T. Iida, and F. Sato, “Large Bore ECR Ion Source with Cylindorically Comb-Shaped Magnetic Fields Configuration”, in Proc. HIAT'09, Venice, Italy, Jun. 2009, paper E-03, pp. 326-330.
[n] A. Pepato et al., “Implementation of the Additive Manufacturing for metals approach: the production of the acceleration grids for DTT NBI project”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2230-2233. doi:10.18429/JACoW-IPAC2023-TUPM018
[n] M. Liepe, V. Veshcherevich, N. P. Sobenin, S. A. Belomestnykh, H. Padamsee, and V. Medjidzade, “Development of High RF Power Delivery System for 1300 MHz Superconducting Cavities of Cornell ERL Injector”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper THP41, pp. 694-696.
[n] Y. Jung et al., “Heat Treatment for a Prototype Half-Wave Resonator Cavity”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 339-341. doi:10.18429/JACoW-LINAC2018-TUPO009
[n] C. Johnstone et al., “Advanced Simulation and Optimization Tools for Dynamic Aperture of Non-Scaling FFAGs and Related Accelerators Including Modern User Interfaces”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE3PBC05, pp. 1907-1909.
[n] A. Gamelin, W. Foosang, P. Marchand, R. Nagaoka, and N. Yamamoto, “Beam Dynamics with a Superconducting Harmonic Cavity for the SOLEIL Upgrade”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2229-2232. doi:10.18429/JACoW-IPAC2022-WEPOMS003
[n] K. Fukami et al., “Magnet Developments and Precise Alignment Schemes for SPring-8-II”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4158-4160. doi:10.18429/JACoW-IPAC2019-THPTS024
[n] H. K. Sayed et al., “TOWARDS A GLOBAL OPTIMIZATION OF THE MUON ACCELERATOR FRONT END”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper TUPBA11, pp. 547-549.
[n] C. Eng, S. Hulbert, C. Mazzoli, B. Podobedov, D. Donetski, and J. Liu, “Mechanical Design of a Soft X-Ray Beam Position Monitor for the Coherent Soft X-Ray Scattering Beamline”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 56. doi:10.18429/JACoW-MEDSI2020-MOPC01
[n] K. Okumura et al., “Study on the fluctuation of electron beam position in KU-FEL”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper WEPSO46, pp. 602-605.
For LaTeX
Use Complete Form
For BibTeX
References
- I. Rodr?¡guez, M. J. Barnes, T. Fowler, G. Ravida, and F. Toral, “Design, Manufacturing and Testing of the CTF3 Tail Clipper Kicker”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPD087, pp. 3299-3301.
- R. Kustom, A. Nassiri, K. J. Suthar, and G. J. Waldschmidt, “Dielectrically-Loaded Waveguide as a Short Period Superconducting Microwave Undulator”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 897-900.
- H. Wang, J. C. Gallardo, and R. B. Palmer, “Short-Range Wakefield in a Flat Pillbox Cavity Generated by a Sub-Relativistic Beam Bunch”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPAH078, pp. 3024-3026.
- P.-Y. Beauvais et al., “Studies on Halo Formation in a Long Magnetic Quadrupole FODO Channel First Experimental Results”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RAG07, pp. 3173-3175.
- F. Lucas Rodriguez, “Estimation of the Response Time and Data Flows in the TOTEM DCS”, in Proc. 8th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'10), Saskatoon, Canada, Oct. 2010, paper THPL021, pp. 171-173.
- F. Roncarolo et al., “Commissioning the New CERN Beam Instrumentation Following the Upgrade of the LHC Injector Chain”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 976-979.
- J.-L. Vay, J. Qiang, J. F. Amundson, E. G. Stern, Z. Li, and C.-K. Ng, “Needs and Considerations for a Consortium of Accelerator Modeling”, in Proc. 54th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'14), East Lansing, MI, USA, Nov. 2014, paper TUO2LR01, pp. 175-177.
- S. Peggs, J. Wei, and R. Gupta, “Magnetic Correction of RHIC Triplets”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 258-261.
- Z. M. Dai, D. G. Li, Y. Xu, X. F. Zhao, and Z. Zhao, “Harmonic Operation of the SDUV HGHG-FEL”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper MOPP021, pp. XX-XX.
- V. Kashikhin, J. Strait, and A. V. Zlobin, “2nd Generation LHC IR Quadrupoles Based on Nb3Sn Racetrack Coils”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPKF073, pp. 1774-1776.
- M. Fouaidy, T. Junquera, and S. Bousson, “Field Emission Investigation in a 3.6 GHz SRF Cavity using X-Ray Measuring Systems”, in Proc. 7th Int. Conf. RF Superconductivity (SRF'95), Gif-sur-Yvette, France, Oct. 1995, paper SRF95C03, pp. 373-377.
- K. Yokoyama et al., “Development of a C-band Accelerating Module for SUPERKEKB”, in Proc. 22nd Linear Accelerator Conf. (LINAC'04), Lübeck, Germany, Aug. 2004, paper MOP31, pp. 108-110.
- B. Podobedov et al., “X-ray beam position monitor with pixelated GaAs detectors for high-power synchrotron radiation beams”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPS064, this conference.
- A. He et al., “Simulation Design of a Low Energy Bunch Compressor with Space Charge Effect”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPWA091, pp. 2307-2309.
- B. Podobedov, H. Witte, and M. Blaskiewicz, “Eddy current shielding of the magnetic field ripple in the EIC electron storage ring vacuum chambers”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPC77, pp. 246-249.
- S. A. Belomestnykh, R. P. K. Kaplan, J. J. R. Reilly, and V. Veshcherevich, “Instability of the RF Control Loop in the Presence of a High-Q Passive Superconducting Cavity”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAT038, pp. 2553-2555.
- V. P. Yakovlev, I. K. Drozdov, I. G. Gonin, N. Perunov, and N. Solyak, “Low-Beta Structure for High Energy Part of Project X”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5PFP063, pp. 972-974.
- F. E. Mills, “Beam Loading”, in Proc. 1962 Conf. on Linear Accelerators for High Energies (LINAC'62), Long Island, NY, USA, Aug. 1962, paper C-07, pp. 283-288.
- Z. Zhao, Y. Xu, and H. Li, “Preliminary design of insertion devices at Hefei Advanced Light Facility”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPM115, pp. 1247-1249.
- N. Pichoff, D. Uriot, W. Braeutigam, and Yu. Senichev, “The ESS-CONCERT Funnel Line”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper FPAH098, pp. 3906-3908.
- M. S. Dmitriyev, M. V. Dyakonov, S. A. Tumanov, and M. I. Zhigailova, “DC Break Design for a 2.45 GHz ECR Ion Source”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3064-3065.
- Y. Kato, T. Iida, and F. Sato, “New Dual-Type Electron Cyclotron Resonance Ion Source for Universal Source on Synthesized Ion Beams”, in Proc. 13th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'15), Yokohama, Japan, Sep. 2015, paper WEPB21, pp. 241-243.
- Y. H. Xie, C. D. Hu, C. C. Jiang, L. Z. Liang, S. Liu, and Y. L. Xie, “Analysis of Beam Quality Optimization of Bucket Ion Source”, in Proc. 19th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'10), Lanzhou, China, Sep. 2010, paper MOPCP047, pp. 147-149.
- M. M. Paoluzzi et al., “Design of the New Wideband RF System for the CERN PS Booster”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 441-443.
- W. Kaabi, H. Jenhani, G. Keppel, V. Palmieri, and A. Variola, “Titanium Nitride Coating as a Multipactor Suppressor on RF Coupler Ceramic Windows”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5PFP004, pp. 1991-1993.
- B. Podobedov et al., “Novel X-ray Beam Position Monitor for Coherent Soft X-ray Beamlines”, in Proc. 67th ICFA Advanced Beam Dynamics Workshop on Future Light Sources (FLS'23), Luzern, Switzerland, Aug.-Sep. 2023, paper TH3B2, pp. 241-244.
- J.-P. Auclair, P.-A. Chamouard, and J.-L. Lemaire, “Limitations and Improvements of Heavy Ion Acceleration with a 20-MeV Proton Linac”, in Proc. 1979 Linear Accelerator Conf. (LINAC'79), Montauk, NY, USA, Sep. 1979, paper S1-11, pp. 43-46.
- I. Sato et al., “Beam Monitor Utilizing Transition Radiation”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2516-2519.
- Y. Kato, T. Iida, and F. Sato, “Large Bore ECR Ion Source with Cylindorically Comb-Shaped Magnetic Fields Configuration”, in Proc. 11th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'09), Venice, Italy, Jun. 2009, paper E-03, pp. 326-330.
- A. Pepato et al., “Implementation of the Additive Manufacturing for metals approach: the production of the acceleration grids for DTT NBI project”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPM018, pp. 2230-2233.
- M. Liepe, V. Veshcherevich, N. P. Sobenin, S. A. Belomestnykh, H. Padamsee, and V. Medjidzade, “Development of High RF Power Delivery System for 1300 MHz Superconducting Cavities of Cornell ERL Injector”, in Proc. 22nd Linear Accelerator Conf. (LINAC'04), Lübeck, Germany, Aug. 2004, paper THP41, pp. 694-696.
- Y. Jung et al., “Heat Treatment for a Prototype Half-Wave Resonator Cavity”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 339-341.
- C. Johnstone et al., “Advanced Simulation and Optimization Tools for Dynamic Aperture of Non-Scaling FFAGs and Related Accelerators Including Modern User Interfaces”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE3PBC05, pp. 1907-1909.
- A. Gamelin, W. Foosang, P. Marchand, R. Nagaoka, and N. Yamamoto, “Beam Dynamics with a Superconducting Harmonic Cavity for the SOLEIL Upgrade”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2229-2232.
- K. Fukami et al., “Magnet Developments and Precise Alignment Schemes for SPring-8-II”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4158-4160.
- H. K. Sayed et al., “TOWARDS A GLOBAL OPTIMIZATION OF THE MUON ACCELERATOR FRONT END”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper TUPBA11, pp. 547-549.
- C. Eng, S. Hulbert, C. Mazzoli, B. Podobedov, D. Donetski, and J. Liu, “Mechanical Design of a Soft X-Ray Beam Position Monitor for the Coherent Soft X-Ray Scattering Beamline”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 56.
- K. Okumura et al., “Study on the fluctuation of electron beam position in KU-FEL”, in Proc. 35th Int. Free Electron Laser Conf. (FEL'13), New York, NY, USA, Aug. 2013, paper WEPSO46, pp. 602-605.
Back to search