Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] Y. G. Wang et al., “Establishing a Laser Treatment to Suppress the Secondary Electron Emission”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1303-1305. doi:10.18429/JACoW-IPAC2019-TUPMP029
[n] K. Shinto et al., “A Negative Ion Beam Probe for Diagnostics of a High Intensity Ion Beam”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPE018, pp. 999-1001.
[n] C. A. Thomas, F. Belloni, and J. Marroncle, “Space Charge Studies for the Ionisation Profile Monitors for the ESS Cold Linac”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 555-558. doi:10.18429/JACoW-IBIC2016-TUPG81
[n] C. C. Jensen, “Extraction Kicker Pulser Design for Main Injector”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6RFP078, pp. 1732-1732.
[n] A. G?Âssel, G. Grygiel, R. Lange, L. Lilje, W. D. M?Âller, and M. Pekeler, “Vertical and Horizontal Cavity Test Results in Comparison with Performance in the TTF Linac”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97C04, pp. 447-451.
[n] R. Akre, F. J. Decker, R. K. Jobe, R. Koontz, M. Mitchell, and R. Strozinsky, “SLC Interferometer System and Phase Distribution Upgrades”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8P023, pp. 3021-3023.
[n] J. Klabunde et al., “The Project of a High-Current Injector at the UNILAC”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper WE3-20, pp. 299-301.
[n] G. E. Fischer et al., “Some Experiences from the Commissioning Program of the SLC Arcs”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 139-142.
[n] Y. Iwashita, H. Fujisawa, M. Ichikawa, and Y. Tajima, “Reduction of RF Skin Loss with Thin Foils”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMN041, pp. 2134-2136.
[n] E. F. Troyanov et al., “Progress in Study of Efficient Crystal Extraction and Collimation at IHEP”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH149, pp. 1565-1567.
[n] Y. Wang et al., “RF Conditioning and Beam Commissioning Status of CSNS DTL”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 747-749. doi:10.18429/JACoW-LINAC2018-THPO031
[n] C. Bloomer, G. Rehm, and J. W. Flanagan, “Measurements of Small Vertical Beamsize using a Coded Aperture at Diamond Light Source”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper TUCZB2, pp. 279-283.
[n] H. Smith, T. Constant, K. Crook, J. Fitch, and T. Taylor, “Radiation and Electrical Safety Systems for PEP”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2800-2803.
[n] L. Zhao, B. Cluggish, and J. S. Kim, “Modeling ECRIS Plasma Using 2D GEM (General ECRIS Model)”, in Proc. ECRIS'08, Chicago, IL, USA, Sep. 2008, paper MOPO-21, pp. 116-119.
[n] J. C. Brunet et al., “Mechanical Design and Layout of the LHC Standard Half-Cell”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 3P013, pp. 3368-3370.
[n] A. Ermakov, C. Martens, and U. Naujoks, “Friction Stir Welding Attempts for UHV Applications: Stainless Steel/Aluminum”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 57-59. doi:10.18429/JACoW-MEDSI2018-TUPH15
[n] F. G. Eysselein, W. G, J. Vlogaert, and D. Perini, “Measurement of Young's Modulus and Shim Calculation for LHC Prototype Dipole Magnets”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 6P009, pp. 3410-3412.
[n] A. Salom, J. M. Alvarez, B. Bravo, and F. P?®rez, “HOM Damped Normal Conducting 1.5 GHz Cavity Design Evolution for the 3rd Harmonic System of the ALBA Storage Ring”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2948-2951. doi:10.18429/JACoW-IPAC2019-WEPRB060
[n] E. Brouzet, R. Cappi, J-L. Gonzalez, W. Pirkl, E. Schulte, and M. Thivent, “A Damper for the /pbar Injection Oscillations in the PS Machine”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2135-2138.
[n] J. J. Song et al., “Deep X-Ray Lithography Fabrication of mmWave Cavities at the Advanced Photon Source”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TH4081, pp. 953-955.
[n] Z. Mart?¡, J. Campmany, and M. Traveria, “A General Method for 2d Magnet Pole Design”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPKF032, pp. 1672-1674.
[n] L. W. Funk et al., “Development of a Commissioning Plan for the APT Linac”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TU4012, pp. 412-414.
[n] M. Pietryka, “Survey and Alignment of SLAC's B-Factory”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7P070, pp. 3666-3668.
[n] S. V. Benson et al., “Demonstration of 3D Effects with High Gain and Efficiency in a UV FEL Oscillator”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THP171, pp. 2429-2431.
[n] V. Karasyuk et al., “H Cyclotron for Charge-Exchange Injection into a Synchrotron”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper B-13, pp. 86-91.
[n] L. Giannessi et al., “Analysis of the Process of Amplification in a Single Pass FEL of High Order Harmonics Generated in a Gas Jet”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper MOCAU05, pp. 248-251.
[n] N. Fukunishi, “Review of Heavy-Ion Cyclotrons”, in Proc. HIAT'15, Yokohama, Japan, Sep. 2015, paper MOA1I01, pp. 11-16.
[n] M. Pasini, D. Habs, O. Kester, and T. Sieber, “RF Design of the MAFF IH-RFQ Power Resonator”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT033, pp. 1216-1218.
[n] W. X. Cheng et al., “Fast-Gated Camera Measurements in SPEAR3”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6REP032, pp. 4015-4017.
[n] M. Kireeff Covo et al., “Absolute Measurement of Electron Cloud Density”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUXAB01, pp. 754-758.
[n] J. Faure, J. L. Laclare, G. Leleux, M. Olivier, and A. Ropert, “MIMAS: Project of Low Energy Accumulator-Injector for Saturne”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3264-3267.
[n] D. A. Liakin et al., “Current Status of the Advanced Residual Gas Monitor for Heavy Ion Synchrotron Applications”, in Proc. DIPAC'05, Lyon, France, Jun. 2005, paper POT006, pp. XX-XX.
[n] D. G. Ouzounov, I. V. Bazarov, B. M. Dunham, C. K. Sinclair, F. W. Wise, and S. Zhou, “The Laser System for the ERL Electron Source at Cornell University”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAS044, pp. 530-532.
[n] R. Shane, S. M. Lidia, Z. Liu, S. Nash, A. C. C. Villari, and O. Yair, “Bunch Shape Measurements at the National Superconducting Cyclotron Laboratory ReAccelerator (ReA3)”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 771-773. doi:10.18429/JACoW-IBIC2016-WEPG54
[n] M. Ieiri et al., “Electrostatic Separator and K1.8 Secondary Beamline at the J-PARC Hadron-Hall”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEC045, pp. 4161-4163.
[n] F. Bulos, D. Burke, R. Helm, J. Irwin, and A. Odian, “Beam-based Alignment and Tuning Procedures for eE- Collider Final Focus Systems”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 3216-3219.
[n] C. Joshi, F. F. Chen, J. M. Dawson, T. Katsouleas, and Y. T. Yan, “Plasma Wave Wigglers for Free Electron Lasers”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 199-202.
[n] M. Gyr, K. H. Kissler, S. Peraire, and J. D. Pahud, “Simultaneous Slow Resonant Extractions from the SPS with Horizontal Tune-Split”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2997-3000.
For LaTeX
Use Complete Form
For BibTeX
References
- Y. G. Wang et al., “Establishing a Laser Treatment to Suppress the Secondary Electron Emission”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1303-1305.
- K. Shinto et al., “A Negative Ion Beam Probe for Diagnostics of a High Intensity Ion Beam”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPE018, pp. 999-1001.
- C. A. Thomas, F. Belloni, and J. Marroncle, “Space Charge Studies for the Ionisation Profile Monitors for the ESS Cold Linac”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 555-558.
- C. C. Jensen, “Extraction Kicker Pulser Design for Main Injector”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU6RFP078, pp. 1732-1732.
- A. G?Âssel, G. Grygiel, R. Lange, L. Lilje, W. D. M?Âller, and M. Pekeler, “Vertical and Horizontal Cavity Test Results in Comparison with Performance in the TTF Linac”, in Proc. 8th Int. Conf. RF Superconductivity (SRF'97), Padova, Italy, Oct. 1997, paper SRF97C04, pp. 447-451.
- R. Akre, F. J. Decker, R. K. Jobe, R. Koontz, M. Mitchell, and R. Strozinsky, “SLC Interferometer System and Phase Distribution Upgrades”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 8P023, pp. 3021-3023.
- J. Klabunde et al., “The Project of a High-Current Injector at the UNILAC”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper WE3-20, pp. 299-301.
- G. E. Fischer et al., “Some Experiences from the Commissioning Program of the SLC Arcs”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 139-142.
- Y. Iwashita, H. Fujisawa, M. Ichikawa, and Y. Tajima, “Reduction of RF Skin Loss with Thin Foils”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMN041, pp. 2134-2136.
- E. F. Troyanov et al., “Progress in Study of Efficient Crystal Extraction and Collimation at IHEP”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPAH149, pp. 1565-1567.
- Y. Wang et al., “RF Conditioning and Beam Commissioning Status of CSNS DTL”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 747-749.
- C. Bloomer, G. Rehm, and J. W. Flanagan, “Measurements of Small Vertical Beamsize using a Coded Aperture at Diamond Light Source”, in Proc. 3rd Int. Beam Instrumentation Conf. (IBIC'14), Monterey, CA, USA, Sep. 2014, paper TUCZB2, pp. 279-283.
- H. Smith, T. Constant, K. Crook, J. Fitch, and T. Taylor, “Radiation and Electrical Safety Systems for PEP”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2800-2803.
- L. Zhao, B. Cluggish, and J. S. Kim, “Modeling ECRIS Plasma Using 2D GEM (General ECRIS Model)”, in Proc. 18th Int. Workshop on ECR Ion Sources (ECRIS'08), Chicago, IL, USA, Sep. 2008, paper MOPO-21, pp. 116-119.
- J. C. Brunet et al., “Mechanical Design and Layout of the LHC Standard Half-Cell”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 3P013, pp. 3368-3370.
- A. Ermakov, C. Martens, and U. Naujoks, “Friction Stir Welding Attempts for UHV Applications: Stainless Steel/Aluminum”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 57-59.
- F. G. Eysselein, W. G, J. Vlogaert, and D. Perini, “Measurement of Young's Modulus and Shim Calculation for LHC Prototype Dipole Magnets”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 6P009, pp. 3410-3412.
- A. Salom, J. M. Alvarez, B. Bravo, and F. P?®rez, “HOM Damped Normal Conducting 1.5 GHz Cavity Design Evolution for the 3rd Harmonic System of the ALBA Storage Ring”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2948-2951.
- E. Brouzet, R. Cappi, J-L. Gonzalez, W. Pirkl, E. Schulte, and M. Thivent, “A Damper for the /pbar Injection Oscillations in the PS Machine”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2135-2138.
- J. J. Song et al., “Deep X-Ray Lithography Fabrication of mmWave Cavities at the Advanced Photon Source”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TH4081, pp. 953-955.
- Z. Mart?¡, J. Campmany, and M. Traveria, “A General Method for 2d Magnet Pole Design”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPKF032, pp. 1672-1674.
- L. W. Funk et al., “Development of a Commissioning Plan for the APT Linac”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TU4012, pp. 412-414.
- M. Pietryka, “Survey and Alignment of SLAC's B-Factory”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 7P070, pp. 3666-3668.
- S. V. Benson et al., “Demonstration of 3D Effects with High Gain and Efficiency in a UV FEL Oscillator”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper THP171, pp. 2429-2431.
- V. Karasyuk et al., “H Cyclotron for Charge-Exchange Injection into a Synchrotron”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper B-13, pp. 86-91.
- L. Giannessi et al., “Analysis of the Process of Amplification in a Single Pass FEL of High Order Harmonics Generated in a Gas Jet”, in Proc. 28th Int. Free Electron Laser Conf. (FEL'06), Berlin, Germany, Aug.-Sep. 2006, paper MOCAU05, pp. 248-251.
- N. Fukunishi, “Review of Heavy-Ion Cyclotrons”, in Proc. 13th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'15), Yokohama, Japan, Sep. 2015, paper MOA1I01, pp. 11-16.
- M. Pasini, D. Habs, O. Kester, and T. Sieber, “RF Design of the MAFF IH-RFQ Power Resonator”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPLT033, pp. 1216-1218.
- W. X. Cheng et al., “Fast-Gated Camera Measurements in SPEAR3”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6REP032, pp. 4015-4017.
- M. Kireeff Covo et al., “Absolute Measurement of Electron Cloud Density”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUXAB01, pp. 754-758.
- J. Faure, J. L. Laclare, G. Leleux, M. Olivier, and A. Ropert, “MIMAS: Project of Low Energy Accumulator-Injector for Saturne”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3264-3267.
- D. A. Liakin et al., “Current Status of the Advanced Residual Gas Monitor for Heavy Ion Synchrotron Applications”, in Proc. 7th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'05), Lyon, France, Jun. 2005, paper POT006, pp. XX-XX.
- D. G. Ouzounov, I. V. Bazarov, B. M. Dunham, C. K. Sinclair, F. W. Wise, and S. Zhou, “The Laser System for the ERL Electron Source at Cornell University”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOPAS044, pp. 530-532.
- R. Shane, S. M. Lidia, Z. Liu, S. Nash, A. C. C. Villari, and O. Yair, “Bunch Shape Measurements at the National Superconducting Cyclotron Laboratory ReAccelerator (ReA3)”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 771-773.
- M. Ieiri et al., “Electrostatic Separator and K1.8 Secondary Beamline at the J-PARC Hadron-Hall”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEC045, pp. 4161-4163.
- F. Bulos, D. Burke, R. Helm, J. Irwin, and A. Odian, “Beam-based Alignment and Tuning Procedures for eE- Collider Final Focus Systems”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 3216-3219.
- C. Joshi, F. F. Chen, J. M. Dawson, T. Katsouleas, and Y. T. Yan, “Plasma Wave Wigglers for Free Electron Lasers”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 199-202.
- M. Gyr, K. H. Kissler, S. Peraire, and J. D. Pahud, “Simultaneous Slow Resonant Extractions from the SPS with Horizontal Tune-Split”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2997-3000.
Back to search