Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. R. Maidment and E. A. Karantzoulis, “Longitudinal Space Charge Via Multi-Particle Simulation”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 782-785.
[n] N. Liu, J. S. Diamond, N. Eddy, A. Ibrahim, N. Patel, and A. Semenov, “Beam Intensity Monitoring System for the PIP-II Injector Test Accelerator”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 330-332. doi:10.18429/JACoW-NAPAC2016-TUPOA24
[n] J. Frisch et al., “Studies of Breakdown in High Gradient X-Band Accelerator Structures Using Acoustic Emission”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TH484, pp. 788-790.
[n] V. Zubko, I. Bogdanov, S. Kozub, P. A. Shcherbakov, L. S. Shirshov, and L. Tkachenko, “Study of Electrodynamic and Thermodynamic Mechanisms Influencing Stability of Superconducting Rutherford Cable”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper THPSC007, pp. 337-339.
[n] R. F. Welton et al., “Development of the SNS External Antenna H- Ion Source”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6RFP037, pp. 438-440.
[n] M. Kim, S. M. Ammons, B. Hackel, and L. Poyneer, “Processing System Design for Implementing a Linear Quadratic Gaussian (LQG) Controller to Optimize the Real-Time Correction of High Wind-Blown Turbulence”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 762. doi:10.18429/JACoW-ICALEPCS2019-TUCPL02
[n] W. J. Schneider et al., “A Load-Locked Gun for the Jefferson Lab Polarized Injector”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA45, pp. 1991-1993.
[n] V. Villamayor Callejo et al., “Control and acquisition system for a radar-based IFMIF-DONES lithium target diagnostic”, presented at the ICALEPCS'25, Chicago, IL, USA, Sep. 2025, paper THPD044, unpublished.
[n] B. Rachmilowitz et al., “Packaged photocathodes for X-ray free electron lasers”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 1586-1587. doi:10.18429/JACoW-IPAC2025-TUPS074
[n] I. N. D. Draganic et al., “Bunch Shape Monitor Measurements at the LANSCE Linac”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 25-27. doi:10.18429/JACoW-NAPAC2016-MOA3CO03
[n] C. Rubbia, “Inertial Fusion: A Contribution of Accelerator Technology to the Energy Problem?”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 353-365.
[n] B. Nguyen et al., “Design and characterization of adjustable-length pulse generator for beam kicker system”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3803-3805. doi:10.18429/JACoW-IPAC2024-THPS30
[n] M. J. Barnes, G. Waters, D. Bishop, and G. D. Wait, “A Pulse Sequencer for the KAON Factory Beam Chopper”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1148-1151.
[n] J. M. Wang, “A Common Transverse Feedback Damper for Two Beams During a Stacking Cycle”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2498-2501.
[n] E. M. Laziev and V. M. Tsakanov, “A Few Aspects of Excitation of Wake Waves in Accelerating Structures”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper TH3-54, pp. 578-579.
[n] B. Kaizer, I. Fishman, and I. G. Gertz, “High Power Amplifier Systems for SARAF Phase II”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper TUPB092, pp. 675-677.
[n] V. S. Klenov, Yu. V. Kiselev, O. Volodkevich, and V. Zubets, “Development of Remote Control System for H-minus Ions Source of INR LINAC”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper THPSC44, pp. 423-425.
[n] J. Reich, C. Mayer-B, S. Martin, K. L. Brown, and F. E. Johnson, “The Jülich Double-Monochromator System”, in Proc. Cyclotrons'72, Vancouver, Canada, Jul. 1972, pp. 407-415.
[n] J. D. Sherman et al., “A DC Proton Injector for Use in High-Current CW Linacs”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP43C, pp. 1424-1426.
[n] J. S. Sokolowski et al., “First Lasing of the Israeli Tandem Electrostatic Accelerator Free Electron Laser”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 3V043, pp. 906-908.
[n] J. S. Diamond and K. S. Martin, “Managing a Real-time Embedded Linux Platform with Buildroot”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 926-929. doi:10.18429/JACoW-ICALEPCS2015-WEPGF096
[n] A. J. Jason, B. Blind, R. K. Cooper, A. R. Koelle, and A. D. Liebman, “Pulsed Air-Core Deflector-Magnet Design Parameters”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2938-2941.
[n] A. H. Li et al., “Measurement and Tuning of the RF Field for the CSNS DTL”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4210-4213. doi:10.18429/JACoW-IPAC2017-THPIK050
[n] C. Pakuza et al., “A Beam Position Monitor for Electron Bunch Detection in the Presence of a More Intense Proton Bunch for the AWAKE Experiment”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 381-384. doi:10.18429/JACoW-IPAC2022-MOPOPT053
[n] I. Pogorelsky, G. H. Kim, K. P. Kusche, W. D. Kimura, L. C. Steinhauer, and S. C. Tidwell, “Update on the ATF Inverse Cherenkov Laser Acceleration Experiment”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2564-2567.
[n] R. R. Lindberg, W. M. Fawley, K.-J. Kim, and Yu. Shvyd, “Simulation Studies of the X-ray Free-Electron Laser Oscillator”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper WEPC40, pp. 587-590.
[n] G. R. Neil, S. Benson, D. Douglas, and T. Powers, “High average power ERL FELS”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper FR102, pp. XX-XX.
[n] E. L. Arandjelovic, D. Devereux, J. Engelbrecht, and U. K. Pedersen, “Tango Integration of the SKA-Low Power and Signal Distribution System”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1526-1528. doi:10.18429/JACoW-ICALEPCS2023-THPDP077
[n] M. J. Yang, A. Marchionni, and C. S. Mishra, “Lattice Function Measurements of Fermilab Recycler Ring”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper FPAB074, pp. 3440-3442.
[n] J. G. Hwang, S. Y. Noh, P. Forck, C. Kim, and T. K. Yang, “Development of Capacitive Linear-Cut Beam Position Monitor for Heavy-Ion Synchrotron of KHIMA Project”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 405-409. doi:10.18429/JACoW-IBIC2015-TUPB041
[n] O. Capatina et al., “Mechanical Design Considerations for =1 Cavities”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper THIOA06, pp. 650-658.
[n] A. C. Caruso, F. Caruso, A. Longhitano, A. Spart?â, G. Primadei, and J. Sura, “Hybrid Configuration, Solid State-Tube, Revamps an Obsolete Tube Amplifier for the INFB K-800 Superconducting Cyclotron”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 263-266. doi:10.18429/JACoW-Cyclotrons2016-WEB02
[n] M. Kasa et al., “Design, Construction, and Magnetic Field Measurements of a Helical Superconducting Undulator for the Advanced Photon Source”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1263-1265. doi:10.18429/JACoW-IPAC2018-TUPMF008
[n] M. J. de Jonge and E. W. Messerschmid, “Measurements of Stacking Efficiency in the CERN Intersecting Storage Rings (ISR)”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 796-799.
[n] S. Roesler, M. Brugger, D. Forkel-Wirth, and J. Vollaire, “Studies of Induced Radioactivity and Residual Dose Rates around Beam Absorbers of Different Materials”, in Proc. HB'10, Morschach, Switzerland, Sep.-Oct. 2010, paper WEO1B01, pp. 448-452.
[n] N. M. Fewell and V. LoDestro, “Operation of the Brookhaven 200-MeV Linac”, in Proc. LINAC'79, Montauk, NY, USA, Sep. 1979, paper S2-4, pp. 83-87.
[n] N. Malitsky, J. Smith, and J. Wei, “A Prototype of the UAL 2.0 Application Toolkit”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper THAP013, pp. XX-XX.
[n] G. D. Alton, B. A. Tatum, and Y. Zhang, “An Axial Injection System for the ORIC”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPB084, pp. 995-997.
[n] L. S. Nadolski et al., “Status of SOLEIL Project”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper THZMA01, pp. 578-582.
[n] J. Lyles, J. Upadhyay, W. Hall, and M. Sanchez Barrueta, “Future directions for RF buncher at LANSCE proton storage ring”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1687-1690. doi:10.18429/JACoW-IPAC2024-TUPS26
[n] H. Okamoto, K. Ito, and H. Higaki, “Non-neutral Plasma Traps for Accelerator-free Experiments on Space-charge-dominated Beam Dynamics”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOOCS1, pp. 46-50.
[n] B. Sayyar-Rodsari, E. Hartman, M. J. Lee, C. Schweiger, and Y. T. Yan, “Efficient Modeling of Nonlinear Beam Optics Using Parametric Model Independent Analysis”, presented at the PAC'05, Knoxville, TN, USA, May 2005, paper MPPE040, unpublished.
[n] R. A. Marsh et al., “High Average Power Deuteron Beam Dynamics”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 798-800. doi:10.18429/JACoW-IPAC2017-MOPIK112
[n] A. Denker et al., “Status of the HZB Cyclotron”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper MOPPT002, pp. 31-33.
[n] V. Sahakyan et al., “Beam Diagnostic and Control Systems for AREAL 50 MeV Linac”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 114-116. doi:10.18429/JACoW-IPAC2017-MOPAB016
[n] H. Ito, H. Sakai, K. Takahashi, K. Umemori, and T. Yamada, “Development of Nb₃Sn Coating System and RF Measurement Results at KEK”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 414-418. doi:10.18429/JACoW-SRF2023-TUPTB014
[n] M. Major et al., “Structural Investigations of Nitrogen-Doped Niobium for Superconducting RF Cavities”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 996-998. doi:10.18429/JACoW-IPAC2017-MOPVA057
[n] M. Schalwat, M. Koepke, A. Matheisen, and H. Weitkaemper, “Set up of Production Line for EXFEL Beam Position Monitor and Quadrupol Units for Cavity String Assembly at CEA”, in Proc. SRF'13, Paris, France, Sep. 2013, paper MOP047, pp. 224-226.
[n] B. Piosczyk, J. Halbritter, P. Kneisel, and O. Stoltz, “Investigations of Additional Losses in Superconducting Niobium Cavities Due to Frozen-In Flux”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 108-113.
[n] R. Bossart et al., “Multishot and Multichannel Fast Ejection”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 286-291.
[n] I. A. Ivanenko, I. V. Kalagin, V. I. Kazacha, and N. Yu. Kazarinov, “Getting Uniform Ion Density on Target in High-Energy Beam Line of Cyclotron U-400M with Two”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper WEPPT007, pp. 335-337.
[n] H. N. Jungwirth et al., “A Superconducting Ring-Cyclotron for Proton Therapy”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper L-07, pp. 621-624.
[n] L. Scibile et al., “The LHC radiation monitoring system for the environment and safety: from design to operation”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPD030, pp. 514-516.
[n] D. J. Kelliher, C. R. Prior, N. Bliss, N. A. Collomb, and J. Pasternak, “Status of the Decay Ring Design for the IDS Neutrino Factory”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPC030, pp. 199-201.
[n] J. C. Sheppard, R. H. Helm, M. J. Lee, and M. D. Woodley, “On-Line Control Models for the Stanford Linear Collider”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2320-2323.
[n] J. Chavanne et al., “Status of the ESRF Insertion Devices”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1644-1647.
[n] E. S. McCrory et al., “LHC@FNAL: A Remote Access Center for the LHC at Fermilab”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH098, pp. 267-269.
[n] R. Corsini, L. A. Dyks, W. Farabolini, A. Gilardi, P. Korysko, and K. N. Sjobak, “Status of VHEE Radiotherapy Related Studies at the CLEAR User Facility at CERN”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2704-2707. doi:10.18429/JACoW-IPAC2021-WEPAB044
[n] M. Wake, D. Blatchley, D. A. Gross, M. Kumada, and A. V. Tollestrup, “Recent Measurement Results of Energy Doubler Magnets”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3894-3899.
[n] N. Gelfand and E. Martensson, “The Shot Summary System for the Tevatron Collider”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1633-1636.
[n] M. Liepe, S. Belomestnykh, J. Dobbins, R. Kaplan, C. Strohman, and B. Stuhl, “Pushing the Limits: RF Field Control at High Loaded Q”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper THP66, pp. 625-625.
[n] S. Assadi et al., “The SNS Laser Profile Monitor Design and Implementation”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPG054, pp. 2706-2708.
[n] M. Tanaka et al., “Construction of the RCNP Polarized Heavy Ion Source, ''HISPANIOLA''”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper F1-02, pp. 174-177.
[n] A. Gotz et al., “TANGO Heads for Industry”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1195-1200. doi:10.18429/JACoW-ICALEPCS2017-THCPL05
[n] P. S. Tracz, “Modelling of Beam Parameters of RF Linac for GBS-ELI-NP”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 528-530. doi:10.18429/JACoW-LINAC2018-TUPO085
[n] J. J. Song, P. J. Matthews, and J. Zhou, “Longitudinal Coupling Impedance of a Bellows and a Ceramic Gap in a Circular Beam Pipe for the Advanced Photon Source”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1336-1339.
[n] T. J. Fessenden et al., “The Experimental Test Accelerator (ETA) II”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3401-3404.
[n] J. W. J. Anton et al., “Progress of Nano-Positioning Design for the Coherent Surface Scattering Imaging Instrument for the Advanced Photon Source Upgrade Project”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 196. doi:10.18429/JACoW-MEDSI2020-TUPC09
[n] B. K. Stillwell et al., “Progress on the Design of the Storage Ring Vacuum System for the Advanced Photon Source Upgrade Project”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3590-3592. doi:10.18429/JACoW-IPAC2017-WEPVA137
[n] F. Amman, E. D. Courant, and A. M. Sessler, “DISCUSSION: Effect of RF Noise on Beam”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 853-854.
[n] F. Merrill, “Transverse Match of High Peak-Current Beam into the LANSCE DTL Using PARMILA”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper MOP71, pp. 231-233.
[n] J. P. Perrine, G. Schmidt, and U. Weinrich, “Cycling and Injection Improvements on the ESRF Booster”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP033G, pp. 542-544.
[n] F. Merrill and L. Rybarcyk, “Beam Dynamics Simulations of the LANSCE Linac”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TH4031, pp. 839-841.
[n] A. Pichard et al., “Method for Efficiency and Time Response Measurement on Diverse Target Ion Sources with Stable Alkali”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC154, pp. 436-438.
[n] I. Ben-Zvi and D. Naik, “Ripple Structure in 56 MHz Quarter Wave Resonator for Multipacting Suppression”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP037, pp. 903-905.
[n] L. S. Shirshov et al., “Superconducting Transformers for Study of High-Current Superconducting Cables”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper THPSC008, pp. 340-342.
[n] T. B. Petersen, J. S. Diamond, N. Liu, P. S. Prieto, D. Slimmer, and A. C. Watts, “Fermilab Switchyard Resonant Beam Position Monitor Electronics Upgrade Results”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 352-354. doi:10.18429/JACoW-NAPAC2016-TUPOA30
[n] F. Briquez et al., “Status of the SOLEIL Insertion Devices”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS118, pp. 3556-3558.
[n] M. J. Knott and F. Hornstra, “On-Line Computation and Presentation of External Proton Beam Line Targeting Information”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 377-379.
[n] R. E. Thern, “Bending Magnets for the CBA Beam Transport Line”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2950-2953.
[n] W. D. Kimura et al., “STELLA-II: Demonstration of Monoenergetic Laser Acceleration”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPG048, pp. 1909-1911.
[n] A. S. Setty et al., “A New Buncher for the ESRF Linac Injector”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 389-391. doi:10.18429/JACoW-IPAC2016-MOPMW001
[n] E. D. van Garderen et al., “Injection Efficiency Monitoring System at the Australian Synchrotron”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper MOPF19, pp. 248-251.
[n] P. Raimondi, P. Tenenbaum, M. Ross, R. Iverson, D. McCormick, and K. Jobe, “Single Pulse Damage in Copper”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper MOA06, pp. 47-49.
[n] F. Pedersen and F. Sacherer, “Theory and Performance of the Longitudinal Active Damping System for the CERN PS Booster”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1396-1399.
[n] J. Breunlin et al., “Diagnostics at the Max IV 3 GeV Storage Ring During Commissioning”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. XX-XX. doi:10.18429/JACoW-IBIC2016-MOAL02
[n] P. K. Sigg, “A Variable, High Speed Beam-Power Absorber”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper F2-05, pp. 212-215.
[n] N. Liu, A. Ibrahim, A. Semenov, and M. Wendt, “Digital Signal Processing for Bunched Beam Intensity Measurements”, in Proc. BIW'12, Newport News, VA, USA, Apr. 2012, paper MOPG002, pp. 20-22.
[n] W. B. Mori, J. S. Wurtele, T. Katsouleas, G. Shvets, T. C. Chiou, and C. Decker, “Recent Work on Short Pulse Laser-Plasma Accelerators”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2635-2638.
[n] O. Felden, M. Bai, R. Gebel, and R. Hecker, “Activities for Isotope Sample Production and Radiation Effect Tests at JULIC/COSY J??lich”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 98-101. doi:10.18429/JACoW-Cyclotrons2016-MOP18
[n] R. E. Thern, “Space-Charge Distortion in the Brookhaven Ionization Profile Monitor”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 646-649.
[n] J. D. Purcell, J. Galambos, and J. Patton, “Initial Experience with Database Applications”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WE113, pp. XX-XX.
[n] L. Groening, H. H. Braun, S. Döbert, M. Borland, and A. Kabel, “Recent Experiments on the Effect of Coherent Synchrotron Radiation on the Electron Beam of CTF II”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TOAA009, pp. 164-166.
[n] J. Egberts et al., “Detailed Experimental Characterization of an Ionization Profile Monitor”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper WEOA03, pp. 547-549.
[n] Y. S. Derbenev, “The Self-cooling of Charged Particle Beams in a Straight Line”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1761-1764.
[n] Q. Qin et al., “Overview of the CEPC Accelerator”, in Proc. HF'14, Beijing, China, Oct. 2014, paper THP3H2, pp. 16-21.
[n] H. Guler et al., “XFEL Couplers RF Conditioning at LAL”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2125-2127. doi:10.18429/JACoW-IPAC2016-WEPMB006
[n] W. K. Lau et al., “Construction of a Thermionic RF Gun Linac System for Ultrashort Electron Beam”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPD013, pp. 4304-4306.
[n] L. W. Funk, J. F. Tooker, T. Benke, and V. Oliphant, “Accelerator Readiness Review Process for the SSC Linac”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1706-1709.
[n] P. Adamson et al., “Operational Performance of a Bunch by Bunch Digital Damper in the Fermilab Main Injector”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPP015, pp. 1440-1442.
[n] H. Grote, F. C. Iselin, E. Keil, and J. Niederer, “The MAD Program”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1292-1295.
[n] R. Kowalewicz et al., “Performance of the CERN Plasma Lens in Laboratory and Beam Tests at the Antiproton Source”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2631-2634.
[n] B. Rusnak et al., “Development of a High Brightness Source for Fast Neutron Imaging”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 1260-1264. doi:10.18429/JACoW-NAPAC2016-THB3IO01
[n] D. Padrazo, B. Bacha, Y. Hu, I. Pinayev, and G. M. Wang, “NSLS-II Beam Intensity Measurement”, in Proc. BIW'12, Newport News, VA, USA, Apr. 2012, paper MOPG004, pp. 26-28.
[n] K. Dahlerup-Petersen, B. Kazmine, V. Popov, V. Sytchev, L. Vassiliev, and V. Zubko, “Energy Extraction Resistors for the Main Dipole and Quadrupole Circuits of the LHC”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP1B09, pp. 2420-2422.
[n] R. Kazimi et al., “CEBAF Injector Achieved World's Best Beam Quality for Three Simultaneous Beams with a Wide Range of Bunch Charges”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT164, pp. 1512-1514.
[n] M. Dehnel, “INDUSTRIAL BEAMLINE DESIGN FOR RADIOISOTOPE PRODUCTION”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 18P05, pp. XX-XX.
[n] O. K. Mulvany, B. Billett, B. Brajuskovic, J. A. Carter, A. McElderry, and K. J. Wakefield, “NEG-Coated Copper Vacuum Chambers for the APS-Upgrade Storage Ring Vacuum System”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 477-479. doi:10.18429/JACoW-NAPAC2019-TUPLS11
[n] W. Kleeven et al., “Status and Results from the TR30 Cycltron Centre Region Model”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 434-437.
[n] R. Connoly et al., “Results from Betatron Phase Measurements in RHIC during the Sextant Test”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP38C, pp. 365-367.
[n] J. Galambos et al., “SNS Global Database Use in Application Programming”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPE016, pp. 2363-2365.
[n] A. S. Smygacheva, Ye. Fomin, and V. Korchuganov, “Magnets Design for 2.5 GeV Booster Synchrotron”, in Proc. RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, pp. 386-389. doi:10.18429/JACoW-RuPAC2021-WEPSC20
[n] J. C. Schuchman, J. Aloia, H. Hsieh, T. Kim, and S. Pjerov, “X-Ray Lithography Source (SXLS) Vacuum System”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 569-571.
For LaTeX
Use Complete Form
For BibTeX
References
- J. R. Maidment and E. A. Karantzoulis, “Longitudinal Space Charge Via Multi-Particle Simulation”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 782-785.
- N. Liu, J. S. Diamond, N. Eddy, A. Ibrahim, N. Patel, and A. Semenov, “Beam Intensity Monitoring System for the PIP-II Injector Test Accelerator”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 330-332.
- J. Frisch et al., “Studies of Breakdown in High Gradient X-Band Accelerator Structures Using Acoustic Emission”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper TH484, pp. 788-790.
- V. Zubko, I. Bogdanov, S. Kozub, P. A. Shcherbakov, L. S. Shirshov, and L. Tkachenko, “Study of Electrodynamic and Thermodynamic Mechanisms Influencing Stability of Superconducting Rutherford Cable”, in Proc. 22nd Russian Particle Accelerator Conf. (RuPAC'10), Protvino, Russia, Sep.-Oct. 2010, paper THPSC007, pp. 337-339.
- R. F. Welton et al., “Development of the SNS External Antenna H- Ion Source”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO6RFP037, pp. 438-440.
- M. Kim, S. M. Ammons, B. Hackel, and L. Poyneer, “Processing System Design for Implementing a Linear Quadratic Gaussian (LQG) Controller to Optimize the Real-Time Correction of High Wind-Blown Turbulence”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 762.
- W. J. Schneider et al., “A Load-Locked Gun for the Jefferson Lab Polarized Injector”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEA45, pp. 1991-1993.
- V. Villamayor Callejo et al., “Control and acquisition system for a radar-based IFMIF-DONES lithium target diagnostic”, presented at the 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, paper THPD044, unpublished.
- B. Rachmilowitz et al., “Packaged photocathodes for X-ray free electron lasers”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPS074, pp. 1586-1587.
- I. N. D. Draganic et al., “Bunch Shape Monitor Measurements at the LANSCE Linac”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 25-27.
- C. Rubbia, “Inertial Fusion: A Contribution of Accelerator Technology to the Energy Problem?”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 353-365.
- B. Nguyen et al., “Design and characterization of adjustable-length pulse generator for beam kicker system”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPS30, pp. 3803-3805.
- M. J. Barnes, G. Waters, D. Bishop, and G. D. Wait, “A Pulse Sequencer for the KAON Factory Beam Chopper”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1148-1151.
- J. M. Wang, “A Common Transverse Feedback Damper for Two Beams During a Stacking Cycle”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2498-2501.
- E. M. Laziev and V. M. Tsakanov, “A Few Aspects of Excitation of Wake Waves in Accelerating Structures”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper TH3-54, pp. 578-579.
- B. Kaizer, I. Fishman, and I. G. Gertz, “High Power Amplifier Systems for SARAF Phase II”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper TUPB092, pp. 675-677.
- V. S. Klenov, Yu. V. Kiselev, O. Volodkevich, and V. Zubets, “Development of Remote Control System for H-minus Ions Source of INR LINAC”, in Proc. 24th Russian Particle Accelerator Conf. (RuPAC'14), Obninsk, Russia, Oct. 2014, paper THPSC44, pp. 423-425.
- J. Reich, C. Mayer-B, S. Martin, K. L. Brown, and F. E. Johnson, “The Jülich Double-Monochromator System”, in Proc. 6th Int. Cyclotron Conf. (Cyclotrons'72), Vancouver, Canada, Jul. 1972, pp. 407-415.
- J. D. Sherman et al., “A DC Proton Injector for Use in High-Current CW Linacs”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP43C, pp. 1424-1426.
- J. S. Sokolowski et al., “First Lasing of the Israeli Tandem Electrostatic Accelerator Free Electron Laser”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 3V043, pp. 906-908.
- J. S. Diamond and K. S. Martin, “Managing a Real-time Embedded Linux Platform with Buildroot”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 926-929.
- A. J. Jason, B. Blind, R. K. Cooper, A. R. Koelle, and A. D. Liebman, “Pulsed Air-Core Deflector-Magnet Design Parameters”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2938-2941.
- A. H. Li et al., “Measurement and Tuning of the RF Field for the CSNS DTL”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4210-4213.
- C. Pakuza et al., “A Beam Position Monitor for Electron Bunch Detection in the Presence of a More Intense Proton Bunch for the AWAKE Experiment”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 381-384.
- I. Pogorelsky, G. H. Kim, K. P. Kusche, W. D. Kimura, L. C. Steinhauer, and S. C. Tidwell, “Update on the ATF Inverse Cherenkov Laser Acceleration Experiment”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2564-2567.
- R. R. Lindberg, W. M. Fawley, K.-J. Kim, and Yu. Shvyd, “Simulation Studies of the X-ray Free-Electron Laser Oscillator”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper WEPC40, pp. 587-590.
- G. R. Neil, S. Benson, D. Douglas, and T. Powers, “High average power ERL FELS”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper FR102, pp. XX-XX.
- E. L. Arandjelovic, D. Devereux, J. Engelbrecht, and U. K. Pedersen, “Tango Integration of the SKA-Low Power and Signal Distribution System”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper THPDP077, pp. 1526-1528.
- M. J. Yang, A. Marchionni, and C. S. Mishra, “Lattice Function Measurements of Fermilab Recycler Ring”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper FPAB074, pp. 3440-3442.
- J. G. Hwang, S. Y. Noh, P. Forck, C. Kim, and T. K. Yang, “Development of Capacitive Linear-Cut Beam Position Monitor for Heavy-Ion Synchrotron of KHIMA Project”, in Proc. 4th Int. Beam Instrumentation Conf. (IBIC'15), Melbourne, Australia, Sep. 2015, pp. 405-409.
- O. Capatina et al., “Mechanical Design Considerations for =1 Cavities”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper THIOA06, pp. 650-658.
- A. C. Caruso, F. Caruso, A. Longhitano, A. Spart?â, G. Primadei, and J. Sura, “Hybrid Configuration, Solid State-Tube, Revamps an Obsolete Tube Amplifier for the INFB K-800 Superconducting Cyclotron”, in Proc. 21th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'16), Zurich, Switzerland, Sep. 2016, pp. 263-266.
- M. Kasa et al., “Design, Construction, and Magnetic Field Measurements of a Helical Superconducting Undulator for the Advanced Photon Source”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1263-1265.
- M. J. de Jonge and E. W. Messerschmid, “Measurements of Stacking Efficiency in the CERN Intersecting Storage Rings (ISR)”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 796-799.
- S. Roesler, M. Brugger, D. Forkel-Wirth, and J. Vollaire, “Studies of Induced Radioactivity and Residual Dose Rates around Beam Absorbers of Different Materials”, in Proc. 46th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'10), Morschach, Switzerland, Sep.-Oct. 2010, paper WEO1B01, pp. 448-452.
- N. M. Fewell and V. LoDestro, “Operation of the Brookhaven 200-MeV Linac”, in Proc. 1979 Linear Accelerator Conf. (LINAC'79), Montauk, NY, USA, Sep. 1979, paper S2-4, pp. 83-87.
- N. Malitsky, J. Smith, and J. Wei, “A Prototype of the UAL 2.0 Application Toolkit”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper THAP013, pp. XX-XX.
- G. D. Alton, B. A. Tatum, and Y. Zhang, “An Axial Injection System for the ORIC”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper MPPB084, pp. 995-997.
- L. S. Nadolski et al., “Status of SOLEIL Project”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper THZMA01, pp. 578-582.
- J. Lyles, J. Upadhyay, W. Hall, and M. Sanchez Barrueta, “Future directions for RF buncher at LANSCE proton storage ring”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPS26, pp. 1687-1690.
- H. Okamoto, K. Ito, and H. Higaki, “Non-neutral Plasma Traps for Accelerator-free Experiments on Space-charge-dominated Beam Dynamics”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOOCS1, pp. 46-50.
- B. Sayyar-Rodsari, E. Hartman, M. J. Lee, C. Schweiger, and Y. T. Yan, “Efficient Modeling of Nonlinear Beam Optics Using Parametric Model Independent Analysis”, presented at the 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPE040, unpublished.
- R. A. Marsh et al., “High Average Power Deuteron Beam Dynamics”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 798-800.
- A. Denker et al., “Status of the HZB Cyclotron”, in Proc. 20th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'13), Vancouver, Canada, Sep. 2013, paper MOPPT002, pp. 31-33.
- V. Sahakyan et al., “Beam Diagnostic and Control Systems for AREAL 50 MeV Linac”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 114-116.
- H. Ito, H. Sakai, K. Takahashi, K. Umemori, and T. Yamada, “Development of Nb₃Sn Coating System and RF Measurement Results at KEK”, in Proc. 21th Int. Conf. RF Superconductivity (SRF'23), Grand Rapids, MI, USA, Jun. 2023, paper TUPTB014, pp. 414-418.
- M. Major et al., “Structural Investigations of Nitrogen-Doped Niobium for Superconducting RF Cavities”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 996-998.
- M. Schalwat, M. Koepke, A. Matheisen, and H. Weitkaemper, “Set up of Production Line for EXFEL Beam Position Monitor and Quadrupol Units for Cavity String Assembly at CEA”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper MOP047, pp. 224-226.
- B. Piosczyk, J. Halbritter, P. Kneisel, and O. Stoltz, “Investigations of Additional Losses in Superconducting Niobium Cavities Due to Frozen-In Flux”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 108-113.
- R. Bossart et al., “Multishot and Multichannel Fast Ejection”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 286-291.
- I. A. Ivanenko, I. V. Kalagin, V. I. Kazacha, and N. Yu. Kazarinov, “Getting Uniform Ion Density on Target in High-Energy Beam Line of Cyclotron U-400M with Two”, in Proc. 20th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'13), Vancouver, Canada, Sep. 2013, paper WEPPT007, pp. 335-337.
- H. N. Jungwirth et al., “A Superconducting Ring-Cyclotron for Proton Therapy”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper L-07, pp. 621-624.
- L. Scibile et al., “The LHC radiation monitoring system for the environment and safety: from design to operation”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPD030, pp. 514-516.
- D. J. Kelliher, C. R. Prior, N. Bliss, N. A. Collomb, and J. Pasternak, “Status of the Decay Ring Design for the IDS Neutrino Factory”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPC030, pp. 199-201.
- J. C. Sheppard, R. H. Helm, M. J. Lee, and M. D. Woodley, “On-Line Control Models for the Stanford Linear Collider”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2320-2323.
- J. Chavanne et al., “Status of the ESRF Insertion Devices”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1644-1647.
- E. S. McCrory et al., “LHC@FNAL: A Remote Access Center for the LHC at Fermilab”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPCH098, pp. 267-269.
- R. Corsini, L. A. Dyks, W. Farabolini, A. Gilardi, P. Korysko, and K. N. Sjobak, “Status of VHEE Radiotherapy Related Studies at the CLEAR User Facility at CERN”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2704-2707.
- M. Wake, D. Blatchley, D. A. Gross, M. Kumada, and A. V. Tollestrup, “Recent Measurement Results of Energy Doubler Magnets”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3894-3899.
- N. Gelfand and E. Martensson, “The Shot Summary System for the Tevatron Collider”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1633-1636.
- M. Liepe, S. Belomestnykh, J. Dobbins, R. Kaplan, C. Strohman, and B. Stuhl, “Pushing the Limits: RF Field Control at High Loaded Q”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper THP66, pp. 625-625.
- S. Assadi et al., “The SNS Laser Profile Monitor Design and Implementation”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPPG054, pp. 2706-2708.
- M. Tanaka et al., “Construction of the RCNP Polarized Heavy Ion Source, ''HISPANIOLA''”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper F1-02, pp. 174-177.
- A. Gotz et al., “TANGO Heads for Industry”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1195-1200.
- P. S. Tracz, “Modelling of Beam Parameters of RF Linac for GBS-ELI-NP”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 528-530.
- J. J. Song, P. J. Matthews, and J. Zhou, “Longitudinal Coupling Impedance of a Bellows and a Ceramic Gap in a Circular Beam Pipe for the Advanced Photon Source”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1336-1339.
- T. J. Fessenden et al., “The Experimental Test Accelerator (ETA) II”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3401-3404.
- J. W. J. Anton et al., “Progress of Nano-Positioning Design for the Coherent Surface Scattering Imaging Instrument for the Advanced Photon Source Upgrade Project”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 196.
- B. K. Stillwell et al., “Progress on the Design of the Storage Ring Vacuum System for the Advanced Photon Source Upgrade Project”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3590-3592.
- F. Amman, E. D. Courant, and A. M. Sessler, “DISCUSSION: Effect of RF Noise on Beam”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 853-854.
- F. Merrill, “Transverse Match of High Peak-Current Beam into the LANSCE DTL Using PARMILA”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper MOP71, pp. 231-233.
- J. P. Perrine, G. Schmidt, and U. Weinrich, “Cycling and Injection Improvements on the ESRF Booster”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP033G, pp. 542-544.
- F. Merrill and L. Rybarcyk, “Beam Dynamics Simulations of the LANSCE Linac”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TH4031, pp. 839-841.
- A. Pichard et al., “Method for Efficiency and Time Response Measurement on Diverse Target Ion Sources with Stable Alkali”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPC154, pp. 436-438.
- I. Ben-Zvi and D. Naik, “Ripple Structure in 56 MHz Quarter Wave Resonator for Multipacting Suppression”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5PFP037, pp. 903-905.
- L. S. Shirshov et al., “Superconducting Transformers for Study of High-Current Superconducting Cables”, in Proc. 22nd Russian Particle Accelerator Conf. (RuPAC'10), Protvino, Russia, Sep.-Oct. 2010, paper THPSC008, pp. 340-342.
- T. B. Petersen, J. S. Diamond, N. Liu, P. S. Prieto, D. Slimmer, and A. C. Watts, “Fermilab Switchyard Resonant Beam Position Monitor Electronics Upgrade Results”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 352-354.
- F. Briquez et al., “Status of the SOLEIL Insertion Devices”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPLS118, pp. 3556-3558.
- M. J. Knott and F. Hornstra, “On-Line Computation and Presentation of External Proton Beam Line Targeting Information”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 377-379.
- R. E. Thern, “Bending Magnets for the CBA Beam Transport Line”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2950-2953.
- W. D. Kimura et al., “STELLA-II: Demonstration of Monoenergetic Laser Acceleration”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPPG048, pp. 1909-1911.
- A. S. Setty et al., “A New Buncher for the ESRF Linac Injector”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 389-391.
- E. D. van Garderen et al., “Injection Efficiency Monitoring System at the Australian Synchrotron”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper MOPF19, pp. 248-251.
- P. Raimondi, P. Tenenbaum, M. Ross, R. Iverson, D. McCormick, and K. Jobe, “Single Pulse Damage in Copper”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper MOA06, pp. 47-49.
- F. Pedersen and F. Sacherer, “Theory and Performance of the Longitudinal Active Damping System for the CERN PS Booster”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1396-1399.
- J. Breunlin et al., “Diagnostics at the Max IV 3 GeV Storage Ring During Commissioning”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. XX-XX.
- P. K. Sigg, “A Variable, High Speed Beam-Power Absorber”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper F2-05, pp. 212-215.
- N. Liu, A. Ibrahim, A. Semenov, and M. Wendt, “Digital Signal Processing for Bunched Beam Intensity Measurements”, in Proc. 15th Beam Instrumentation Workshop (BIW'12), Newport News, VA, USA, Apr. 2012, paper MOPG002, pp. 20-22.
- W. B. Mori, J. S. Wurtele, T. Katsouleas, G. Shvets, T. C. Chiou, and C. Decker, “Recent Work on Short Pulse Laser-Plasma Accelerators”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2635-2638.
- O. Felden, M. Bai, R. Gebel, and R. Hecker, “Activities for Isotope Sample Production and Radiation Effect Tests at JULIC/COSY J??lich”, in Proc. 21th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'16), Zurich, Switzerland, Sep. 2016, pp. 98-101.
- R. E. Thern, “Space-Charge Distortion in the Brookhaven Ionization Profile Monitor”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 646-649.
- J. D. Purcell, J. Galambos, and J. Patton, “Initial Experience with Database Applications”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper WE113, pp. XX-XX.
- L. Groening, H. H. Braun, S. Döbert, M. Borland, and A. Kabel, “Recent Experiments on the Effect of Coherent Synchrotron Radiation on the Electron Beam of CTF II”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TOAA009, pp. 164-166.
- J. Egberts et al., “Detailed Experimental Characterization of an Ionization Profile Monitor”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper WEOA03, pp. 547-549.
- Y. S. Derbenev, “The Self-cooling of Charged Particle Beams in a Straight Line”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1761-1764.
- Q. Qin et al., “Overview of the CEPC Accelerator”, in Proc. 55th ICFA Advanced Beam Dynamics Workshop on High Luminosity Circular e+e- Colliders - Higgs Factory (HF'14), Beijing, China, Oct. 2014, paper THP3H2, pp. 16-21.
- H. Guler et al., “XFEL Couplers RF Conditioning at LAL”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2125-2127.
- W. K. Lau et al., “Construction of a Thermionic RF Gun Linac System for Ultrashort Electron Beam”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPD013, pp. 4304-4306.
- L. W. Funk, J. F. Tooker, T. Benke, and V. Oliphant, “Accelerator Readiness Review Process for the SSC Linac”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1706-1709.
- P. Adamson et al., “Operational Performance of a Bunch by Bunch Digital Damper in the Fermilab Main Injector”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPP015, pp. 1440-1442.
- H. Grote, F. C. Iselin, E. Keil, and J. Niederer, “The MAD Program”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1292-1295.
- R. Kowalewicz et al., “Performance of the CERN Plasma Lens in Laboratory and Beam Tests at the Antiproton Source”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2631-2634.
- B. Rusnak et al., “Development of a High Brightness Source for Fast Neutron Imaging”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 1260-1264.
- D. Padrazo, B. Bacha, Y. Hu, I. Pinayev, and G. M. Wang, “NSLS-II Beam Intensity Measurement”, in Proc. 15th Beam Instrumentation Workshop (BIW'12), Newport News, VA, USA, Apr. 2012, paper MOPG004, pp. 26-28.
- K. Dahlerup-Petersen, B. Kazmine, V. Popov, V. Sytchev, L. Vassiliev, and V. Zubko, “Energy Extraction Resistors for the Main Dipole and Quadrupole Circuits of the LHC”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP1B09, pp. 2420-2422.
- R. Kazimi et al., “CEBAF Injector Achieved World's Best Beam Quality for Three Simultaneous Beams with a Wide Range of Bunch Charges”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPLT164, pp. 1512-1514.
- M. Dehnel, “INDUSTRIAL BEAMLINE DESIGN FOR RADIOISOTOPE PRODUCTION”, in Proc. 17th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'04), Tokyo, Japan, Oct. 2004, paper 18P05, pp. XX-XX.
- O. K. Mulvany, B. Billett, B. Brajuskovic, J. A. Carter, A. McElderry, and K. J. Wakefield, “NEG-Coated Copper Vacuum Chambers for the APS-Upgrade Storage Ring Vacuum System”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 477-479.
- W. Kleeven et al., “Status and Results from the TR30 Cycltron Centre Region Model”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 434-437.
- R. Connoly et al., “Results from Betatron Phase Measurements in RHIC during the Sextant Test”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP38C, pp. 365-367.
- J. Galambos et al., “SNS Global Database Use in Application Programming”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPPE016, pp. 2363-2365.
- A. S. Smygacheva, Ye. Fomin, and V. Korchuganov, “Magnets Design for 2.5 GeV Booster Synchrotron”, in Proc. 27th Russian Particle Accelerator Conference (RuPAC2021), Alushta, Crimea, Sep.-Oct. 2021, pp. 386-389.
- J. C. Schuchman, J. Aloia, H. Hsieh, T. Kim, and S. Pjerov, “X-Ray Lithography Source (SXLS) Vacuum System”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 569-571.
Back to search