Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] B. Rusnak et al., “Evaluation of RF Seals for Resonant Cavity Applications”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper MO431, pp. 129-131.
[n] A. V. Perna et al., “The HD-DCM-Lite: A High-Dynamic DCM with Extended Scanning Capabilities for Sirius/LNLS Beamlines”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 203. doi:10.18429/JACoW-MEDSI2020-TUPC11
[n] W. G. Davies, “Injection Diagnostic Procedures for the Chalk River Superconducting Cyclotron”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper I02, pp. 328-331.
[n] C. Benvenuti, “Invited Paper: Cryopumping for Cyclotrons”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper D-02, pp. 2128-2132.
[n] J. Karmakar et al., “Simulation Studies for Dark Current Signature From DLS RF Gun”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1630-1632. doi:10.18429/JACoW-IPAC2021-TUPAB105
[n] G. S. Fedel et al., “LLRF and Timing System Integration at ESS”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1426-1430. doi:10.18429/JACoW-ICALEPCS2023-THPDP051
[n] S. Singh, “Particle injection and acceleration in laser wakefield generated via propagation of two laser pulses”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper TUPC31, unpublished.
[n] C. Birattari, M. Bonardi, F. Resmini, and A. Salomone, “Status Report on Radioisotope Production for Biomedical Purposes at Milan AVF Cyclotron”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper GP-02, pp. 693-695.
[n] A. A. Hassan, C. L. Fink, and G. Rosing, “A Beam Characterization of H- Particles”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1504-1507.
[n] D. G. Cole, G. Machicoane, T. Ropponen, L. T. Sun, and L. Tobos, “A Low Power Survey of Radial-Offset Axial Sputtering and High Intensity Uranium Production from Axial Sputtering in SuSI”, in Proc. ECRIS'10, Grenoble, France, Aug. 2010, paper MOPOT016, pp. 69-71.
[n] L. M. Volpe et al., “High Heat Load Front Ends for Sirius”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 324-326. doi:10.18429/JACoW-MEDSI2016-WEPE06
[n] D. A. Reis, “Recent Results from SPPS, Including Pump-Probe Timing Measurements”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper THOB002, pp. XX-XX.
[n] W. Leonhardt et al., “Thermal Management of Magnetic Focussing Horns Used in the Narrow and Broad Band Neutrino Beams at the AGS”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1740-1743.
[n] M. Saveri Silva, R. R. Geraldes, A. Gilmour, T. A. M. Ruijl, and R. M. Schneider, “Thermal Management and Crystal Clamping Concepts for the New High-Dynamics DCM for Sirius”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 194-197. doi:10.18429/JACoW-MEDSI2016-TUPE15
[n] C. C. Hall, J. P. Edelen, J. A. Einstein-Curtis, and M. C. Kilpatrick, “BPM Analysis with Variational Autoencoders”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 543-545. doi:10.18429/JACoW-IPAC2022-MOPOTK038
[n] P. Hurh, J. Morgan, and S. Tariq, “Comprehensive Electro-Magnetic, Thermal, and Structural Finite Element Analysis of the Lithium Collection Lens at the FNAL Antiproton Source”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper ROPB011, pp. 641-643.
[n] L. R. Doolittle et al., “Linac Design for the FERMI Project”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper MOP015, pp. 61-63.
[n] M. H. Wallner, R. H. Farias, A. P. B. Lima, and F. Santiago de Oliveira, “Novel 500 MHz Solid State Power Amplifier Module Development at Sirius”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2349-2351. doi:10.18429/JACoW-IPAC2021-TUPAB358
[n] S. L. Bogomolov et al., “Recent Development in ECR Ion Sources at FLNR JINR”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper FRYOR01, pp. 203-207.
[n] D. Rapisarda et al., “Indirect Measurement of Power Deposition on the IFMIF/EVEDA Beam Dump by means of Radiation Chambers”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC126, pp. 1314-1316.
[n] S. L. Kramer, Y. Cho, and E. A. Crosbie, “Achromatic Lattice Comparison for Light Sources”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 749-752.
[n] R. T. Avery, H. P. Hernandez, R. M. Reimers, and W. W. Salsig, “Mechanical Design of Compressor Test Apparatus for Electron Ring Accelerator Research”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 1050-1055.
[n] R. P. Fliller et al., “The Two Stage Crystal Collimator for RHIC”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH082, pp. 1399-1401.
[n] J. L. Turner et al., “Beam Stability Studies in the LCLS Linac”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper MOPPH051, pp. 94-97.
[n] L. M. Russo, “Software and Gateware Development for Sirius BPM Electronics Using a Service-Oriented Architecture”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1736-1741. doi:10.18429/JACoW-ICALEPCS2017-THPHA149
[n] M. Gyr, K. H. Kissler, S. Peraire, and J. D. Pahud, “Simultaneous Slow Resonant Extractions from the SPS with Horizontal Tune-Split”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2997-3000.
[n] M. P. Reiser, “Space Charge Effects and Current Limitations in Cyclotrons”, in Proc. Cyclotrons'66, Gatlinburg, TN, USA, Aug. 1966, paper C-006, pp. XX-XX.
[n] C. Benvenuti, “Invited Paper: Recent Advances in Vacuum Techniques for Accelerators”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper M01, pp. 540-546.
[n] J. Gareyte, A. Hilaire, and F. Schmidt, “Dynamic Aperture and Long Term Particle Stability in the Presence of Strong Sextupoles in the CERN SPS”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1376-1379.
For LaTeX
Use Complete Form
For BibTeX
References
- B. Rusnak et al., “Evaluation of RF Seals for Resonant Cavity Applications”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper MO431, pp. 129-131.
- A. V. Perna et al., “The HD-DCM-Lite: A High-Dynamic DCM with Extended Scanning Capabilities for Sirius/LNLS Beamlines”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 203.
- W. G. Davies, “Injection Diagnostic Procedures for the Chalk River Superconducting Cyclotron”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper I02, pp. 328-331.
- C. Benvenuti, “Invited Paper: Cryopumping for Cyclotrons”, in Proc. 8th Int. Cyclotron Conf. and Their Applications (Cyclotrons'78), Bloomington, IN, USA, Sep. 1978, paper D-02, pp. 2128-2132.
- J. Karmakar et al., “Simulation Studies for Dark Current Signature From DLS RF Gun”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 1630-1632.
- G. S. Fedel et al., “LLRF and Timing System Integration at ESS”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper THPDP051, pp. 1426-1430.
- S. Singh, “Particle injection and acceleration in laser wakefield generated via propagation of two laser pulses”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPC31, unpublished.
- C. Birattari, M. Bonardi, F. Resmini, and A. Salomone, “Status Report on Radioisotope Production for Biomedical Purposes at Milan AVF Cyclotron”, in Proc. 9th Int. Cyclotron Conf. and Their Applications (Cyclotrons'81), Caen, France, Sep. 1981, paper GP-02, pp. 693-695.
- A. A. Hassan, C. L. Fink, and G. Rosing, “A Beam Characterization of H- Particles”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1504-1507.
- D. G. Cole, G. Machicoane, T. Ropponen, L. T. Sun, and L. Tobos, “A Low Power Survey of Radial-Offset Axial Sputtering and High Intensity Uranium Production from Axial Sputtering in SuSI”, in Proc. 19th Int. Workshop on ECR Ion Sources (ECRIS'10), Grenoble, France, Aug. 2010, paper MOPOT016, pp. 69-71.
- L. M. Volpe et al., “High Heat Load Front Ends for Sirius”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 324-326.
- D. A. Reis, “Recent Results from SPPS, Including Pump-Probe Timing Measurements”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper THOB002, pp. XX-XX.
- W. Leonhardt et al., “Thermal Management of Magnetic Focussing Horns Used in the Narrow and Broad Band Neutrino Beams at the AGS”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1740-1743.
- M. Saveri Silva, R. R. Geraldes, A. Gilmour, T. A. M. Ruijl, and R. M. Schneider, “Thermal Management and Crystal Clamping Concepts for the New High-Dynamics DCM for Sirius”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 194-197.
- C. C. Hall, J. P. Edelen, J. A. Einstein-Curtis, and M. C. Kilpatrick, “BPM Analysis with Variational Autoencoders”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 543-545.
- P. Hurh, J. Morgan, and S. Tariq, “Comprehensive Electro-Magnetic, Thermal, and Structural Finite Element Analysis of the Lithium Collection Lens at the FNAL Antiproton Source”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper ROPB011, pp. 641-643.
- L. R. Doolittle et al., “Linac Design for the FERMI Project”, in Proc. 23rd Linear Accelerator Conf. (LINAC'06), Knoxville, TN, USA, Aug. 2006, paper MOP015, pp. 61-63.
- M. H. Wallner, R. H. Farias, A. P. B. Lima, and F. Santiago de Oliveira, “Novel 500 MHz Solid State Power Amplifier Module Development at Sirius”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2349-2351.
- S. L. Bogomolov et al., “Recent Development in ECR Ion Sources at FLNR JINR”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper FRYOR01, pp. 203-207.
- D. Rapisarda et al., “Indirect Measurement of Power Deposition on the IFMIF/EVEDA Beam Dump by means of Radiation Chambers”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPC126, pp. 1314-1316.
- S. L. Kramer, Y. Cho, and E. A. Crosbie, “Achromatic Lattice Comparison for Light Sources”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 749-752.
- R. T. Avery, H. P. Hernandez, R. M. Reimers, and W. W. Salsig, “Mechanical Design of Compressor Test Apparatus for Electron Ring Accelerator Research”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 1050-1055.
- R. P. Fliller et al., “The Two Stage Crystal Collimator for RHIC”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPAH082, pp. 1399-1401.
- J. L. Turner et al., “Beam Stability Studies in the LCLS Linac”, in Proc. 30th Int. Free Electron Laser Conf. (FEL'08), Gyeongju, Korea, Aug. 2008, paper MOPPH051, pp. 94-97.
- L. M. Russo, “Software and Gateware Development for Sirius BPM Electronics Using a Service-Oriented Architecture”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1736-1741.
- M. Gyr, K. H. Kissler, S. Peraire, and J. D. Pahud, “Simultaneous Slow Resonant Extractions from the SPS with Horizontal Tune-Split”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2997-3000.
- M. P. Reiser, “Space Charge Effects and Current Limitations in Cyclotrons”, in Proc. Int. Conf. on Isochronous Cyclotrons (Cyclotrons'66), Gatlinburg, TN, USA, Aug. 1966, paper C-006, pp. XX-XX.
- C. Benvenuti, “Invited Paper: Recent Advances in Vacuum Techniques for Accelerators”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper M01, pp. 540-546.
- J. Gareyte, A. Hilaire, and F. Schmidt, “Dynamic Aperture and Long Term Particle Stability in the Presence of Strong Sextupoles in the CERN SPS”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1376-1379.
Back to search