Favourites
For Word
[n] S. A. Kahn et al., “Focusing Horn System for the BNL Very Long Baseline Neutrino Oscillation Experiment”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPPG036, pp. 3255-3257.
[n] L. G. Yan et al., “Magnetic Measurement of the Undulator U38 for THz-FEL”, in Proc. SAP'17, Jishou, China, Aug. 2017, pp. 156-158. doi:10.18429/JACoW-SAP2017-TUPH21
[n] M. Watanabe et al., “Design of UVSOR Light Source at IMS”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3175-3178.
[n] R. Stassen, R. Eichhorn, F. M. Esser, B. Laatsch, G. Schug, and H. Singer, “The HW Resonators in J??lich”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper MOP03, pp. 113-117.
[n] H. D. Glass et al., “Stability Tests of Permanent Magnets Built with Strontium Ferrite”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2P013, pp. 3260-3262.
[n] R. A. Yogi et al., “Uppsala High Power Test Stand for ESS Spoke Cavities”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper TUPB108, pp. 711-713.
[n] S. LIU et al., “operational experiences and upgrade of CSNS ion source”, presented at the IPAC'26, Deauville, France, May 2026, paper WEP4658, unpublished.
[n] P. C. Vander Arend and W. B. Fowler, “Superconducting Accelerator Magnet Cooling Systems”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 119-122.
[n] I. Pinayev and A. Blednykh, “Evaluation of Heat Dissipation in the BPM Buttons”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH5RFP014, pp. 3471-3472.
[n] T. Bergmark et al., “Operations with Internal Targets and Electron Cooling at CELSIUS”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 465-468.
[n] G. Devanz et al., “Experimental Characterization of a 700 MHz =0.47 5 Cell Superconducting Cavity Prototype for Pulsed Proton Linac”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP126, pp. 853-855.
[n] H. D. Glass et al., “Permanent Dipole Magnets for the 8 GeV Transfer Line at FNAL”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2P012, pp. 3257-3259.
[n] M. Dominiczak, F. Bouly, N. Gandolfo, and C. Joly, “Modeling of Superconducting Spoke Cavity with its Control Loops Systems for the MYRRHA Linac Project”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 387-391. doi:10.18429/JACoW-SRF2019-TUP002
[n] T. Bergmark et al., “Machine studies related to Internal Hydrogen Pellet Target and to Electron Cooling/Heating at CELSIUS”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP1B11, pp. 575-577.
[n] H. Bach, K. I. Blomqvist, J. Chavanne, P. Elleaume, M. N. Pedersen, and M. Vignat, “Insertion Devices Produced at DANFYSIK A/S”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP04F, pp. 2207-2209.
[n] E. Boltezar et al., “Experimental RFQ as Injector to the CERN Linac I”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper H15, pp. 302-305.
For LaTeX
Use Complete Form
For BibTeX
References
- S. A. Kahn et al., “Focusing Horn System for the BNL Very Long Baseline Neutrino Oscillation Experiment”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPPG036, pp. 3255-3257.
- L. G. Yan et al., “Magnetic Measurement of the Undulator U38 for THz-FEL”, in Proc. 13th Symposium on Accelerator Physics (SAP'17), Jishou, China, Aug. 2017, pp. 156-158.
- M. Watanabe et al., “Design of UVSOR Light Source at IMS”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3175-3178.
- R. Stassen, R. Eichhorn, F. M. Esser, B. Laatsch, G. Schug, and H. Singer, “The HW Resonators in J??lich”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper MOP03, pp. 113-117.
- H. D. Glass et al., “Stability Tests of Permanent Magnets Built with Strontium Ferrite”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 2P013, pp. 3260-3262.
- R. A. Yogi et al., “Uppsala High Power Test Stand for ESS Spoke Cavities”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper TUPB108, pp. 711-713.
- S. LIU et al., “operational experiences and upgrade of CSNS ion source”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper WEP4658, this conference.
- P. C. Vander Arend and W. B. Fowler, “Superconducting Accelerator Magnet Cooling Systems”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 119-122.
- I. Pinayev and A. Blednykh, “Evaluation of Heat Dissipation in the BPM Buttons”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH5RFP014, pp. 3471-3472.
- T. Bergmark et al., “Operations with Internal Targets and Electron Cooling at CELSIUS”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 465-468.
- G. Devanz et al., “Experimental Characterization of a 700 MHz =0.47 5 Cell Superconducting Cavity Prototype for Pulsed Proton Linac”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPP126, pp. 853-855.
- H. D. Glass et al., “Permanent Dipole Magnets for the 8 GeV Transfer Line at FNAL”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 2P012, pp. 3257-3259.
- M. Dominiczak, F. Bouly, N. Gandolfo, and C. Joly, “Modeling of Superconducting Spoke Cavity with its Control Loops Systems for the MYRRHA Linac Project”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 387-391.
- T. Bergmark et al., “Machine studies related to Internal Hydrogen Pellet Target and to Electron Cooling/Heating at CELSIUS”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper MOP1B11, pp. 575-577.
- H. Bach, K. I. Blomqvist, J. Chavanne, P. Elleaume, M. N. Pedersen, and M. Vignat, “Insertion Devices Produced at DANFYSIK A/S”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP04F, pp. 2207-2209.
- E. Boltezar et al., “Experimental RFQ as Injector to the CERN Linac I”, in Proc. 1981 Linear Accelerator Conf. (LINAC'81), Santa Fe, NM, USA, Oct. 1981, paper H15, pp. 302-305.
Back to search