Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] D. T. Tran et al., “Cyclotron Centre Region Study and Beam Diagnostic at Orl?®ans' Cyclotron”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper D-14, pp. 275-278.
[n] A. Reppond, M. Ambrosia, B. C. Hansen, C. R. Meitzler, D. P. Redden, and D. A. Swenson, “A Small 1 MeV Electron Accelerator for Measuring Heavy Metal Concentrations in Smokestack Gases”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8P118, pp. 3872-3874.
[n] B. Laun?®, “The Diagnostics System for the SPIRAL R.I.B. Facility”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper E-07, pp. 194-197.
[n] B. Laun?®, “Diagnostics for Radioactive Beams”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper K-1, pp. XX-XX.
[n] C. Phillips et al., “THz detection and investigation of vacuum-compatible optical components”, presented at the NAPAC'25, Sacramento, California, USA, Aug. 2025, paper SUP032, unpublished.
[n] R. Kazimi, F. R. Huson, W. W. MacKay, and C. R. Meitzler, “Operation of a 473 MHz Four-Rod Cavity RFQ”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TU4-09, pp. 317-319.
[n] J. D. Friedman, “Linac X-Ray and Electron Dosimetry Using a Remote Control Pin Diode”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 736-739.
[n] T. W. Nijboer, “BEAM-PHASE MEASUREMENT IN THE AGOR-CYCLOTRON”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 18P12, pp. XX-XX.
[n] L. Xiu, L. Dong, C. R. Meitzler, and S. Ohnuma, “A New Design of Helical Electrostatic Quadrupole and its Quasi-Octupole Mode of Operation”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1533-1536.
[n] T. Kato et al., “Design of XFEL facility in Harima”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPD010, pp. 466-468.
[n] S. Kandri-Rody et al., “Identification System for SPIRAL”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper D-07, pp. 359-361.
[n] B. Laun?®, D. P. May, R. C. Rogers, and D. H. Youngblood, “Status of the Texas AM Coupled Cyclotron Project”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper CP-01, pp. 213-215.
[n] T. Bergmark et al., “Machine studies related to Internal Hydrogen Pellet Target and to Electron Cooling/Heating at CELSIUS”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP1B11, pp. 575-577.
[n] K. J. Antes, Aa. M. Larsson, and C. R. Meitzler, “A Volume Ion Source with Pulsed Magnetic Field”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1008-1011.
[n] Y. Yang, S. Kelham, S. Kim, W. Liu, and J. Power, “Eom-based bunch arrival monitor development at the Argonne wakefield accelerator facility”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4112-4114. doi:10.18429/JACoW-IPAC2023-THPA064
[n] S. Kelham, G. Ha, and P. Piot, “Design of phase diversity Electro-Optic Sampling of THz coherent transition radiation”, presented at the NAPAC'25, Sacramento, California, USA, Aug. 2025, paper SUP063, unpublished.
[n] S. Kedia, R. Ahuja, R. Mehta, and C. P. Safvan, “Design Study of the Spiral Buncher Cavities for the High Current Injector at IUAC”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1048-1050. doi:10.18429/JACoW-IPAC2021-MOPAB337
[n] S. Kelham, G. Ha, A. Ody, and J. Power, “Design Updates for the Phase-Diversity Electro-Optic Sampling Experiment Using an EEX-Generated Longitudinally Shaped Beam at the Argonne Wakefield Accelerator”, presented at the IPAC'26, Deauville, France, May 2026, paper MOP6341, unpublished.
For LaTeX
Use Complete Form
For BibTeX
References
- D. T. Tran et al., “Cyclotron Centre Region Study and Beam Diagnostic at Orl?®ans' Cyclotron”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper D-14, pp. 275-278.
- A. Reppond, M. Ambrosia, B. C. Hansen, C. R. Meitzler, D. P. Redden, and D. A. Swenson, “A Small 1 MeV Electron Accelerator for Measuring Heavy Metal Concentrations in Smokestack Gases”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 8P118, pp. 3872-3874.
- B. Laun?®, “The Diagnostics System for the SPIRAL R.I.B. Facility”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper E-07, pp. 194-197.
- B. Laun?®, “Diagnostics for Radioactive Beams”, in Proc. 16th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'01), East Lansing, MI, USA, May 2001, paper K-1, pp. XX-XX.
- C. Phillips et al., “THz detection and investigation of vacuum-compatible optical components”, presented at the 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, paper SUP032, unpublished.
- R. Kazimi, F. R. Huson, W. W. MacKay, and C. R. Meitzler, “Operation of a 473 MHz Four-Rod Cavity RFQ”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TU4-09, pp. 317-319.
- J. D. Friedman, “Linac X-Ray and Electron Dosimetry Using a Remote Control Pin Diode”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 736-739.
- T. W. Nijboer, “BEAM-PHASE MEASUREMENT IN THE AGOR-CYCLOTRON”, in Proc. 17th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'04), Tokyo, Japan, Oct. 2004, paper 18P12, pp. XX-XX.
- L. Xiu, L. Dong, C. R. Meitzler, and S. Ohnuma, “A New Design of Helical Electrostatic Quadrupole and its Quasi-Octupole Mode of Operation”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1533-1536.
- T. Kato et al., “Design of XFEL facility in Harima”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPD010, pp. 466-468.
- S. Kandri-Rody et al., “Identification System for SPIRAL”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper D-07, pp. 359-361.
- B. Laun?®, D. P. May, R. C. Rogers, and D. H. Youngblood, “Status of the Texas AM Coupled Cyclotron Project”, in Proc. 9th Int. Cyclotron Conf. and Their Applications (Cyclotrons'81), Caen, France, Sep. 1981, paper CP-01, pp. 213-215.
- T. Bergmark et al., “Machine studies related to Internal Hydrogen Pellet Target and to Electron Cooling/Heating at CELSIUS”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper MOP1B11, pp. 575-577.
- K. J. Antes, Aa. M. Larsson, and C. R. Meitzler, “A Volume Ion Source with Pulsed Magnetic Field”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1008-1011.
- Y. Yang, S. Kelham, S. Kim, W. Liu, and J. Power, “Eom-based bunch arrival monitor development at the Argonne wakefield accelerator facility”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPA064, pp. 4112-4114.
- S. Kelham, G. Ha, and P. Piot, “Design of phase diversity Electro-Optic Sampling of THz coherent transition radiation”, presented at the 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, paper SUP063, unpublished.
- S. Kedia, R. Ahuja, R. Mehta, and C. P. Safvan, “Design Study of the Spiral Buncher Cavities for the High Current Injector at IUAC”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 1048-1050.
- S. Kelham, G. Ha, A. Ody, and J. Power, “Design Updates for the Phase-Diversity Electro-Optic Sampling Experiment Using an EEX-Generated Longitudinally Shaped Beam at the Argonne Wakefield Accelerator”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper MOP6341, this conference.
Back to search