Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] V. Martinelli et al., “High Level Software for Beam 6D Phase Space Characterization”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2522-2525. doi:10.18429/JACoW-IPAC2019-WEPGW025
[n] S. Lee, E.-S. Kim, and I. Shin, “Design of RF Power Coupler for RISP Half Wave Resonator”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2208-2210. doi:10.18429/JACoW-IPAC2016-WEPMB041
[n] M. Fouaidy, T. Junquera, and S. Bousson, “Field Emission Investigation in a 3.6 GHz SRF Cavity using X-Ray Measuring Systems”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper SRF95C03, pp. 373-377.
[n] A. Ueda, K. Harada, Y. Kobayashi, and T. Mitsuhashi, “Investigation of Injection for the Low-emittance Lattice with New-6.25 ohm Kicker Magnet System at the Photon Factory”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT069, pp. 710-712.
[n] T. Mitsuhashi, “Beam Halo Observation by Coronagraph”, in Proc. DIPAC'05, Lyon, France, Jun. 2005, paper ITMM03, pp. 7-11.
[n] S. J. Park et al., “Fabrication and Test of Pulsed 200-MW Electron Gun for High-Power Klystrons”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper MO467, pp. 196-198.
[n] N. Akasaka et al., “High-Speed Gated Camera Observations of Transverse Beam Size Along Bunch Train at the KEKB B-Factory”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP5A11, pp. 1119-1121.
[n] T. Mitsuhashi and M. Tadano, “Measurement of Bunch Length using Intensity Interferometry”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPRI110, pp. 1936-1938.
[n] M. Tobiyama, A. Higuchi, T. Mitsuhashi, T. Kasuga, and S. Sakanaka, “Impurity Growth in Single Bunch Operation of PF”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAQ06, pp. 3300-3302.
[n] V. Martinelli et al., “High Level Software for Beam 6D Phase Space Characterization”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2522-2525. doi:10.18429/JACoW-IPAC2019-WEPGW025
[n] J. W. Flanagan, S. Hiramatsu, and T. Mitsuhashi, “Automatic Continuous Transverse Beam-size Measurement System for KEKB”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP5A10, pp. 1714-1716.
[n] T. Mitsuhashi and T. Naito, “A Measurement of Beam Size of the ATF Damping Ring with the SR-Interferometer”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP29F, pp. 1565-1567.
[n] T. Mitsuhashi, K. Haga, and T. Katsura, “Construction of a Synchrotron Radiation (SR) Position Monitor by Means of X -Ray Photoemission”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 576-579.
[n] C. K. Sung, E.-S. Kim, S. Lee, and I. Shin, “Development of RF Conditioning System for RISP RF Power Couplers”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2211-2213. doi:10.18429/JACoW-IPAC2016-WEPMB044
[n] A. Yamamoto et al., “The Research on the Carbon Nano Tube Cathode”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper FPAB017, pp. 3326-3328.
[n] T. Lamy, “Reflections on the life of Richard Geller”, in Proc. ECRIS'08, Chicago, IL, USA, Sep. 2008, paper TUIO02, pp. 179-179.
[n] B. Qin, M. Fan, Y. Q. Xiong, Y. Xu, and J. Yang, “Design Study of Compact Cyclotron Magnets in Virtual Prototyping Environment”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAN056, pp. 3354-3356.
[n] M. Marie-Jeanne et al., “Measurement of the Sixty GHz ECR Ion Source using Megawatt Magnets - SEISM Magnetic Field Map”, in Proc. ECRIS'10, Grenoble, France, Aug. 2010, paper MOCOCK04, pp. 33-36.
[n] J. W. Flanagan, S. Hiramatsu, and T. Mitsuhashi, “Optical Diagnostics System for the KEKB B-Factory”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP1A01, pp. 1783-1785.
[n] J. Angot, T. Lamy, M. Marie-Jeanne, P. Sortais, and T. Thuillier, “LPSC PHOENIX ECR Charge Breeder Beam Optics and Efficiencies”, in Proc. ECRIS'12, Sydney, Australia, Sep. 2012, paper THYO02, pp. 167-171.
[n] K.-H. Park et al., “Digitally Controlled Magnet Power Supply”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEP049, pp. XX-XX.
[n] A. Ogata, T. Katsura, T. Kawamoto, T. Mitsuhashi, and N. Yamamoto, “Phase Space Profile Measurement Using an X-Ray Pinhole Camera”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1498-1501.
[n] J.-L. Biarrotte, S. Blivet, S. Bousson, T. Junquera, G. Olry, and H. Saugnac, “Design Study of a 176 MHz SRF Half Wave Resonator for the SPIRAL-2 Project”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper TUP02, pp. 269-273.
[n] H. J. Cha, S. W. Jang, E.-S. Kim, K. R. Kim, S. H. Park, and J. Y. Yoon, “Design Considerations of a Balloon-shaped SSR Superconducting Cavity”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 448-450. doi:10.18429/JACoW-LINAC2018-TUPO051
[n] T. Andre et al., “SEISM: 60 GHz ECR ion source for future accelerator”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2406-2408. doi:10.18429/JACoW-IPAC2023-TUPM086
[n] T. Naito and T. Mitsuhashi, “Very Small Beam Size Measurement by Reflective SR Interferometer at KEK-ATF”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH058, pp. 1142-1144.
[n] W. B. Colson and B. W. Williams, “Free Electron Lasers in 2004”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper THPOS58, pp. XX-XX.
[n] J. Y. Yoon et al., “High Power Test of the Antenna Adjustable Power Coupler for 325 MHz Superconducting Cavities”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2286-2288. doi:10.18429/JACoW-IPAC2021-TUPAB339
[n] G. Martinet et al., “Results of beta=0.12 quarter wave resonator for radioactive beams production at SPIRAL2 Facility”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper WEP40, pp. XX-XX.
[n] H. Kobayashi and T. Mitsuhashi, “Optical Profile Monitor for the KEKB Injector Linac”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP1A02, pp. 1786-1788.
[n] M. Zhou et al., “Modeling Self-Ionized Plasma Wakefield Acceleration for Afterburner Parameters Using QuickPIC”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPAE046, pp. 2905-2907.
[n] V. Martinelli et al., “BOLINA, a Suite for High Level Beam Optimization: First Experimental Results on the Adige Injection Beamline of SPES”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 933-936. doi:10.18429/JACoW-IPAC2022-TUPOST035
[n] T. André et al., “Status of the 60 GHz ECR Ion Source Research”, in Proc. ECRIS'20, East Lansing, MI, USA, Sep. 2020, pp. 102-105. doi:10.18429/JACoW-ECRIS2020-TUZZO04
[n] M. Katoh and T. Mitsuhashi, “A Construction of Optical Beam Profile Monitor for High Brilliance Configuration of the Photon Factory”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP053L, pp. 1669-1671.
[n] D. Marcato et al., “Demonstration of Beam Emittance Optimization using Reinforcement Learning”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2881-2884. doi:10.18429/JACoW-IPAC2023-WEPA100
[n] T. Sakai, M. Ikeda, S. Ohsawa, T. Sugimura, and N. Sakabe, “High Brightness Electron Beam Focusing System for an X-ray Generator”, in Proc. LINAC'10, Tsukuba, Japan, Sep. 2010, paper MOP111, pp. 322-324.
[n] S. Barbanotti et al., “The prototype cryomodule for the EUROTRANS program”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper WEP83, pp. XX-XX.
[n] C. Compton et al., “Superconducting Quarter-Wave Resonator Cavity and Cryomodule Development for a Heavy Ion Re-accelerator”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper THP033, pp. 854-856.
For LaTeX
Use Complete Form
For BibTeX
References
- V. Martinelli et al., “High Level Software for Beam 6D Phase Space Characterization”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2522-2525.
- S. Lee, E.-S. Kim, and I. Shin, “Design of RF Power Coupler for RISP Half Wave Resonator”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2208-2210.
- M. Fouaidy, T. Junquera, and S. Bousson, “Field Emission Investigation in a 3.6 GHz SRF Cavity using X-Ray Measuring Systems”, in Proc. 7th Int. Conf. RF Superconductivity (SRF'95), Gif-sur-Yvette, France, Oct. 1995, paper SRF95C03, pp. 373-377.
- A. Ueda, K. Harada, Y. Kobayashi, and T. Mitsuhashi, “Investigation of Injection for the Low-emittance Lattice with New-6.25 ohm Kicker Magnet System at the Photon Factory”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPLT069, pp. 710-712.
- T. Mitsuhashi, “Beam Halo Observation by Coronagraph”, in Proc. 7th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'05), Lyon, France, Jun. 2005, paper ITMM03, pp. 7-11.
- S. J. Park et al., “Fabrication and Test of Pulsed 200-MW Electron Gun for High-Power Klystrons”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper MO467, pp. 196-198.
- N. Akasaka et al., “High-Speed Gated Camera Observations of Transverse Beam Size Along Bunch Train at the KEKB B-Factory”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP5A11, pp. 1119-1121.
- T. Mitsuhashi and M. Tadano, “Measurement of Bunch Length using Intensity Interferometry”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THPRI110, pp. 1936-1938.
- M. Tobiyama, A. Higuchi, T. Mitsuhashi, T. Kasuga, and S. Sakanaka, “Impurity Growth in Single Bunch Operation of PF”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RAQ06, pp. 3300-3302.
- V. Martinelli et al., “High Level Software for Beam 6D Phase Space Characterization”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2522-2525.
- J. W. Flanagan, S. Hiramatsu, and T. Mitsuhashi, “Automatic Continuous Transverse Beam-size Measurement System for KEKB”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP5A10, pp. 1714-1716.
- T. Mitsuhashi and T. Naito, “A Measurement of Beam Size of the ATF Damping Ring with the SR-Interferometer”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP29F, pp. 1565-1567.
- T. Mitsuhashi, K. Haga, and T. Katsura, “Construction of a Synchrotron Radiation (SR) Position Monitor by Means of X -Ray Photoemission”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 576-579.
- C. K. Sung, E.-S. Kim, S. Lee, and I. Shin, “Development of RF Conditioning System for RISP RF Power Couplers”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2211-2213.
- A. Yamamoto et al., “The Research on the Carbon Nano Tube Cathode”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper FPAB017, pp. 3326-3328.
- T. Lamy, “Reflections on the life of Richard Geller”, in Proc. 18th Int. Workshop on ECR Ion Sources (ECRIS'08), Chicago, IL, USA, Sep. 2008, paper TUIO02, pp. 179-179.
- B. Qin, M. Fan, Y. Q. Xiong, Y. Xu, and J. Yang, “Design Study of Compact Cyclotron Magnets in Virtual Prototyping Environment”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPAN056, pp. 3354-3356.
- M. Marie-Jeanne et al., “Measurement of the Sixty GHz ECR Ion Source using Megawatt Magnets - SEISM Magnetic Field Map”, in Proc. 19th Int. Workshop on ECR Ion Sources (ECRIS'10), Grenoble, France, Aug. 2010, paper MOCOCK04, pp. 33-36.
- J. W. Flanagan, S. Hiramatsu, and T. Mitsuhashi, “Optical Diagnostics System for the KEKB B-Factory”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP1A01, pp. 1783-1785.
- J. Angot, T. Lamy, M. Marie-Jeanne, P. Sortais, and T. Thuillier, “LPSC PHOENIX ECR Charge Breeder Beam Optics and Efficiencies”, in Proc. 20th Int. Workshop on ECR Ion Sources (ECRIS'12), Sydney, Australia, Sep. 2012, paper THYO02, pp. 167-171.
- K.-H. Park et al., “Digitally Controlled Magnet Power Supply”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WEP049, pp. XX-XX.
- A. Ogata, T. Katsura, T. Kawamoto, T. Mitsuhashi, and N. Yamamoto, “Phase Space Profile Measurement Using an X-Ray Pinhole Camera”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1498-1501.
- J.-L. Biarrotte, S. Blivet, S. Bousson, T. Junquera, G. Olry, and H. Saugnac, “Design Study of a 176 MHz SRF Half Wave Resonator for the SPIRAL-2 Project”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper TUP02, pp. 269-273.
- H. J. Cha, S. W. Jang, E.-S. Kim, K. R. Kim, S. H. Park, and J. Y. Yoon, “Design Considerations of a Balloon-shaped SSR Superconducting Cavity”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 448-450.
- T. Andre et al., “SEISM: 60 GHz ECR ion source for future accelerator”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPM086, pp. 2406-2408.
- T. Naito and T. Mitsuhashi, “Very Small Beam Size Measurement by Reflective SR Interferometer at KEK-ATF”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPCH058, pp. 1142-1144.
- W. B. Colson and B. W. Williams, “Free Electron Lasers in 2004”, in Proc. 26th Int. Free Electron Laser Conf. & 11th FEL Users Workshop (FEL'04), Trieste, Italy, Aug.-Sep. 2004, paper THPOS58, pp. XX-XX.
- J. Y. Yoon et al., “High Power Test of the Antenna Adjustable Power Coupler for 325 MHz Superconducting Cavities”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2286-2288.
- G. Martinet et al., “Results of beta=0.12 quarter wave resonator for radioactive beams production at SPIRAL2 Facility”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper WEP40, pp. XX-XX.
- H. Kobayashi and T. Mitsuhashi, “Optical Profile Monitor for the KEKB Injector Linac”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP1A02, pp. 1786-1788.
- M. Zhou et al., “Modeling Self-Ionized Plasma Wakefield Acceleration for Afterburner Parameters Using QuickPIC”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPAE046, pp. 2905-2907.
- V. Martinelli et al., “BOLINA, a Suite for High Level Beam Optimization: First Experimental Results on the Adige Injection Beamline of SPES”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 933-936.
- T. André et al., “Status of the 60 GHz ECR Ion Source Research”, in Proc. 24th International Workshop on ECR Ion Sources (ECRIS'20), East Lansing, MI, USA, Sep. 2020, paper TUZZO04, pp. 102-105.
- M. Katoh and T. Mitsuhashi, “A Construction of Optical Beam Profile Monitor for High Brilliance Configuration of the Photon Factory”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP053L, pp. 1669-1671.
- D. Marcato et al., “Demonstration of Beam Emittance Optimization using Reinforcement Learning”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA100, pp. 2881-2884.
- T. Sakai, M. Ikeda, S. Ohsawa, T. Sugimura, and N. Sakabe, “High Brightness Electron Beam Focusing System for an X-ray Generator”, in Proc. 25th Linear Accelerator Conf. (LINAC'10), Tsukuba, Japan, Sep. 2010, paper MOP111, pp. 322-324.
- S. Barbanotti et al., “The prototype cryomodule for the EUROTRANS program”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper WEP83, pp. XX-XX.
- C. Compton et al., “Superconducting Quarter-Wave Resonator Cavity and Cryomodule Development for a Heavy Ion Re-accelerator”, in Proc. 24th Linear Accelerator Conf. (LINAC'08), Victoria, Canada, Sep.-Oct. 2008, paper THP033, pp. 854-856.
Back to search