Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] Y. Socol, G. N. Kulipanov, A. N. Matveenko, O. A. Shevchenko, and N. Vinokurov, “13.5-nm Free-Electron Laser for EUV Lithography”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper TUPA28, pp. 250-253.
[n] R. Rossmanith et al., “Operation of the ANKA Synchrotron Light Source with Superconductive Undulators”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAE039, pp. 2559-2561.
[n] J. G. Alessi et al., “Performance of the New AGS RFQ Preinjector”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 999-1002.
[n] J. Alessi et al., “The New AGS H- RFQ Preinjector”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 538-541.
[n] A. S. Matveev, I. V. Davidyuk, O. A. Shevchenko, V. G. Tcheskidov, N. A. Vinokurov, and V. Volkov, “Simulation and Optimization of the Transport Beamline for the NovoFEL RF Gun”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 647-650. doi:10.18429/JACoW-FEL2019-THP027
[n] P. Thingstad, “Inert Gas Purifier for SLAC's Two-Meter Steamer Chamber”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 659-661.
[n] S. S. Kurennoy, A. J. Jason, and W. M. Tuzel, “Aperture Windows in High-Gradient Cavities for Accelerating Low-Energy Muons”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPZ029, pp. 862-864.
[n] F. S. He, J. K. Hao, F. Wang, W. Xu, B. C. Zhang, and K. Zhao, “Analytical and Experimental Study of Crosstalk in the Superconducting Cavity”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5PFP045, pp. 2098-2100.
[n] T. L. Smith, N. P. DiMonte, A. Nassiri, Y.-E. Sun, and A. Zholents, “RF Conditioning of the Photo-Cathode RF Gun at the Advanced Photon Source - NWA RF Measurements”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2621-2623. doi:10.18429/JACoW-IPAC2015-WEPWA052
[n] G. LeBlanc et al., “MAX 4, a 3 GeV Light Source”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAG025, pp. 2321-2323.
[n] P. M. Ivanov et al., “Head-Tail Instability at Tevatron”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPPB021, pp. 3062-3064.
[n] S. S. Kurennoy, A. J. Jason, and H. M. Miyadera, “Large-Acceptance Linac for Accelerating Low-Energy Muons”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPE075, pp. 3518-3520.
[n] K. Jimbo, K. Leung, T. Shirai, and K. A. Van Bibber, “Proposal for a Compact Neutron Generator Based on a Negative Deuterium Ion Beam”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1599-1601. doi:10.18429/JACoW-IPAC2022-WEOXSP1
[n] J. K. Hao et al., “SRF Activities at Peking University”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper FRIOB01, pp. 969-972.
[n] H. M. Miyadera, A. J. Jason, and S. S. Kurennoy, “Simulation of Large Acceptance Muon Linac”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPE076, pp. 3521-3523.
[n] M. A. G. Johansson, L.-J. Lindgren, M. Sj?Âstr?Âm, and P. F. Tavares, “MAX IV 3 GeV Storage Ring Magnet Block Production Series Measurement Results”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3069-3071. doi:10.18429/JACoW-IPAC2015-WEPMN062
[n] B. Anderberg et al., “The 500 MeV Injector for MAX-lab using a Recirculated Linac”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP1B06, pp. 1687-1692.
[n] C. Benabderrahmane et al., “Magnets for the ESRF-EBS Project”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1096-1099. doi:10.18429/JACoW-IPAC2016-TUPMB001
[n] S. Werin, F. Curbis, M. Eriksson, C. Quitmann, S. Thorin, and P. Johnsson, “Towards an X-ray FEL at the MAX IV Laboratory”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper TUP080, pp. 549-552.
[n] J. G. Alessi et al., “AGS Preinjector Improvement”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 276-279.
[n] F. J. M. Farley and C. Carli, “EULIMA Beam Delivery”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1796-1799.
[n] H. M. Miyadera, A. J. Jason, and K. Nagamine, “Design of Muon Accelerators for an Advanced Muon Facility”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMS017, pp. 3032-3034.
[n] T. Ohnishi, S. Ichikawa, and M. Wakasugi, “Electron-Beam-Driven RI Separator for SCRIT at RIKEN RI Beam Factory”, in Proc. HIAT'15, Yokohama, Japan, Sep. 2015, paper WEPB02, pp. 194-196.
[n] E. M. Mashkina et al., “Magnetic Measurement Device for Superconductive Undulator Mock-up Coils at ANKA”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC121, pp. 2291-2293.
[n] J. K. Hao et al., “3.5-Cell Superconducting Cavity for DC-SRF Photoinjector at Peking University”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper TUPPO013, pp. 205-207.
[n] V. Ranjbar et al., “Spin Coupling Resonance Study in AGS”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPLE050, pp. 356-358.
[n] Y. Irie et al., “Precise Cavity Tuning System of a Low Output-impedance Second-harmonic Cavity at ISIS”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPFI062, pp. 2836-2838.
[n] M. A. G. Johansson, L.-J. Lindgren, and B. Anderberg, “MAX IV 3 GeV Storage Ring Prototype Magnet”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPO015, pp. 2427-2429.
[n] S. A. Litvinov, A. Dolinskyy, O. E. Gorda, M. Steck, H. Weick, and D. Toprek, “Effects of Field Imperfections in the Isochronous Mode of the CR Storage Ring at FAIR”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPEA009, pp. 2510-2512.
[n] M. A. G. Johansson, L.-J. Lindgren, M. Sj?Âstr?Âm, and P. F. Tavares, “MAX IV 3 GeV Storage Ring Magnet Block Production Series Measurement Results”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1157-1159. doi:10.18429/JACoW-IPAC2016-TUPMB023
[n] R. Appleby, D. A.-K. Angal-Kalinin, P. Bambade, S. Cavalier, O. Dadoun, and D. Toprek, “Improved 2mrad crossing angle layout for the International Linear Collider”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMN077, pp. 2883-2885.
[n] M. Sj?Âstr?Âm, M. Eriksson, L.-J. Lindgren, and E. J. Wall?®n, “Corrector Based Determination of Quadrupole Centres”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC119, pp. 1347-1349.
[n] P. Ferracin, “Modeling Techniques for Design and Analysis of Superconducting Accelerator Magnets”, in Proc. ICAP'09, San Francisco, CA, USA, Aug.-Sep. 2009, paper TU3IODN03, pp. 77-82.
[n] H. M. Miyadera, A. J. Jason, and S. S. Kurennoy, “Simulation of Large Acceptance Linac for Muons”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5REP071, pp. 4941-4943.
[n] Y. D. Li and K.-B. Liu, “TPS Fast Corrector Magnet Power Converter”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPO019, pp. 3379-3381.
[n] R. Rossmanith et al., “Superconductive Damping Wigglers for the CLIC Project”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAN023, pp. 200-202.
[n] G. LeBlanc et al., “Status of the MAX-III Storage Ring”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAG024, pp. 2318-2320.
[n] Lj. Milinkovic and D. Toprek, “Axial Focusing in the Acceleration Gaps of the Cyclotron”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP138G, pp. 1306-1310.
[n] Lj. Milinkovic, B. Brajuskovic, and D. Toprek, “Injection and Central Region Studies for the VINCY Cyclotron”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1516-1519.
[n] D. Shu, P. K. Job, and M. Kuzay, “CVD-Diamond-Based Position Sensitive Photoconductive Detector for High-Flux X-Rays and Gamma Rays”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA90, pp. 2090-2092.
[n] H. Tarawneh, ?à. Andersson, M. Bergqvist, M. Brandin, M. Eriksson, and L. Malmgren, “Higher Order Modes in the New 100 and 500 MHz Cavities at MAX-lab”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT137, pp. 2158-2160.
[n] H. Zhang, Y. M. Li, K. X. Liu, F. Wang, and B. C. Zhang, “LLRF Control System for PKU DC-SC Photocathode Injector”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC097, pp. 304-306.
[n] N. Vinokurov, O. A. Shevchenko, and V. G. Tcheskidov, “Variable-period Permanent Magnet Undulators”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper THOC3, pp. 696-699.
[n] G. LeBlanc et al., “Status of the MAX-lab Injector Project”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH080, pp. 2278-2280.
[n] I. V. Davidyuk, O. A. Shevchenko, V. G. Tcheskidov, and N. Vinokurov, “The Prototype of New Variable Period Undulator for Novosibirsk Free Electron Laser.”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 677-680. doi:10.18429/JACoW-FEL2015-WEP051
[n] Y. D. Li, Y.-C. Chien, and K.-B. Liu, “TPS Digital Corrector Magnet Power Converter based on FPGA”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPO020, pp. 3382-3384.
[n] V. Ranjbar, S. Y. Lee, M. Bai, E. Courant, and W. W. MacKay, “Mapping Out the Full Spin Resonance Structure of RHIC”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPAH139, pp. 3177-3179.
[n] D. Toprek and Lj. Milinkovi, “Design of the Central Region for the Axial Injection in the VINCY Cyclotron”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2361-2364.
[n] S. Casalbuoni et al., “Investigations of the Thermal Beam Load of a Superconducting In-vacuum Undulator”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS122, pp. 3568-3570.
[n] S. Arai, T. Fujino, T. Fukushima, T. Hattori, E. Tojyo, and N. Tokuda, “Split Coaxial RFQ Linac with Modulated Vane”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3175-3178.
[n] D. Trbojevic and E. Courant, “Low Emittance Lattices for Electron Storage Rings Revisited”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1000-1003.
[n] R. Rossmanith et al., “A Year's Experience with a Superconducting Undulator in the Storage Ring ANKA”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS123, pp. 3571-3573.
[n] J. K. Hao et al., “Improving Gradient of 9-cell SRF Cavities at Peking University”, in Proc. SRF'13, Paris, France, Sep. 2013, paper THP011, pp. 914-916.
[n] K.-B. Liu, K. T. Hsu, Y. D. Li, and B. S. Wang, “TPS Magnet Power Supply System”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPD075, pp. 3275-3277.
[n] ?à. Andersson, M. Bergqvist, M. Eriksson, L. Malmgren, and L. Th?Ñnell, “The 100 MHz RF System for MAX-II and MAX-III”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPLE082, pp. 2118-2120.
[n] M. Eriksson, M. Bergqvist, M. Brandin, L.-J. Lindgren, M. Sj?Âstr?Âm, and S. Thorin, “MAX III Commissioning”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS058, pp. 3416-3417.
[n] C.-Y. Liu and Y. D. Li, “Design and Implementation a Resonant Dc Power Bus”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPD074, pp. 3272-3274.
[n] Y. D. Menshov, “CALCULATION OF THE VACUUM SYSTEM OF THE MCC 30/15 CYCLOTRON”, in Proc. RuPAC'08, Zvenigorod, Russia, Sep.-Oct. 2008, paper TUCPH10, pp. XX-XX.
[n] Z. K. Liu et al., “Operational Experience of the Digital LLRF Control System at the Booster Ring of Taiwan Photon Source”, in Proc. PCaPAC'18, Hsinchu City, Taiwan, Oct. 2018, pp. 204-206. doi:10.18429/JACoW-PCaPAC2018-THP18
[n] I. Davidyuk, O. A. Shevchenko, V. G. Tcheskidov, and N. Vinokurov, “Modeling and Design of the Variable Period and Pole Number Undulator for the Second Stage of the Novosibirsk FEL”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper MOP037, pp. 96-99.
[n] V. Ranjbar, A. U. Luccio, W. W. MacKay, N. Tsoupas, and S. Y. Lee, “Fitting Helical Snake and Rotator Field Strength Measurements in RHIC”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH077, pp. 3404-3405.
[n] M. Bai, W. W. MacKay, T. Roser, and V. Ranjbar, “RHIC Spin Flipper Commissioning”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPLE056, pp. 299-301.
[n] J. Claus, H. N. Brown, M. Month, and A. van Steenbergen, “Multiturn Injection into the Converted AGS”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 342-347.
[n] L. V. Myshelovka, A. N. Oleinik, and K. A. Vokhmyanina, “Controlling of 10 keV Electron Beam Using Different Dielectric Channels”, presented at the RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, paper WEPSC47, unpublished.
[n] I. V. Davidyuk, O. A. Shevchenko, V. G. Tcheskidov, and N. A. Vinokurov, “Variable-Period Variable-Pole Number Hybrid Undulator Design for Novosibirsk THz FEL”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 531-534. doi:10.18429/JACoW-FEL2019-WEP094
For LaTeX
Use Complete Form
For BibTeX
References
- Y. Socol, G. N. Kulipanov, A. N. Matveenko, O. A. Shevchenko, and N. Vinokurov, “13.5-nm Free-Electron Laser for EUV Lithography”, in Proc. 32nd Int. Free Electron Laser Conf. (FEL'10), Malmö, Sweden, Aug. 2010, paper TUPA28, pp. 250-253.
- R. Rossmanith et al., “Operation of the ANKA Synchrotron Light Source with Superconductive Undulators”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAE039, pp. 2559-2561.
- J. G. Alessi et al., “Performance of the New AGS RFQ Preinjector”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 999-1002.
- J. Alessi et al., “The New AGS H- RFQ Preinjector”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 538-541.
- A. S. Matveev, I. V. Davidyuk, O. A. Shevchenko, V. G. Tcheskidov, N. A. Vinokurov, and V. Volkov, “Simulation and Optimization of the Transport Beamline for the NovoFEL RF Gun”, in Proc. 39th Int. Free Electron Laser Conf. (FEL'19), Hamburg, Germany, Aug. 2019, pp. 647-650.
- P. Thingstad, “Inert Gas Purifier for SLAC's Two-Meter Steamer Chamber”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 659-661.
- S. S. Kurennoy, A. J. Jason, and W. M. Tuzel, “Aperture Windows in High-Gradient Cavities for Accelerating Low-Energy Muons”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPZ029, pp. 862-864.
- F. S. He, J. K. Hao, F. Wang, W. Xu, B. C. Zhang, and K. Zhao, “Analytical and Experimental Study of Crosstalk in the Superconducting Cavity”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5PFP045, pp. 2098-2100.
- T. L. Smith, N. P. DiMonte, A. Nassiri, Y.-E. Sun, and A. Zholents, “RF Conditioning of the Photo-Cathode RF Gun at the Advanced Photon Source - NWA RF Measurements”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2621-2623.
- G. LeBlanc et al., “MAX 4, a 3 GeV Light Source”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPAG025, pp. 2321-2323.
- P. M. Ivanov et al., “Head-Tail Instability at Tevatron”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPPB021, pp. 3062-3064.
- S. S. Kurennoy, A. J. Jason, and H. M. Miyadera, “Large-Acceptance Linac for Accelerating Low-Energy Muons”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPE075, pp. 3518-3520.
- K. Jimbo, K. Leung, T. Shirai, and K. A. Van Bibber, “Proposal for a Compact Neutron Generator Based on a Negative Deuterium Ion Beam”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1599-1601.
- J. K. Hao et al., “SRF Activities at Peking University”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper FRIOB01, pp. 969-972.
- H. M. Miyadera, A. J. Jason, and S. S. Kurennoy, “Simulation of Large Acceptance Muon Linac”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPE076, pp. 3521-3523.
- M. A. G. Johansson, L.-J. Lindgren, M. Sj?Âstr?Âm, and P. F. Tavares, “MAX IV 3 GeV Storage Ring Magnet Block Production Series Measurement Results”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3069-3071.
- B. Anderberg et al., “The 500 MeV Injector for MAX-lab using a Recirculated Linac”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper MOP1B06, pp. 1687-1692.
- C. Benabderrahmane et al., “Magnets for the ESRF-EBS Project”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1096-1099.
- S. Werin, F. Curbis, M. Eriksson, C. Quitmann, S. Thorin, and P. Johnsson, “Towards an X-ray FEL at the MAX IV Laboratory”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper TUP080, pp. 549-552.
- J. G. Alessi et al., “AGS Preinjector Improvement”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 276-279.
- F. J. M. Farley and C. Carli, “EULIMA Beam Delivery”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1796-1799.
- H. M. Miyadera, A. J. Jason, and K. Nagamine, “Design of Muon Accelerators for an Advanced Muon Facility”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMS017, pp. 3032-3034.
- T. Ohnishi, S. Ichikawa, and M. Wakasugi, “Electron-Beam-Driven RI Separator for SCRIT at RIKEN RI Beam Factory”, in Proc. 13th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'15), Yokohama, Japan, Sep. 2015, paper WEPB02, pp. 194-196.
- E. M. Mashkina et al., “Magnetic Measurement Device for Superconductive Undulator Mock-up Coils at ANKA”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC121, pp. 2291-2293.
- J. K. Hao et al., “3.5-Cell Superconducting Cavity for DC-SRF Photoinjector at Peking University”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper TUPPO013, pp. 205-207.
- V. Ranjbar et al., “Spin Coupling Resonance Study in AGS”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPLE050, pp. 356-358.
- Y. Irie et al., “Precise Cavity Tuning System of a Low Output-impedance Second-harmonic Cavity at ISIS”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPFI062, pp. 2836-2838.
- M. A. G. Johansson, L.-J. Lindgren, and B. Anderberg, “MAX IV 3 GeV Storage Ring Prototype Magnet”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPO015, pp. 2427-2429.
- S. A. Litvinov, A. Dolinskyy, O. E. Gorda, M. Steck, H. Weick, and D. Toprek, “Effects of Field Imperfections in the Isochronous Mode of the CR Storage Ring at FAIR”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPEA009, pp. 2510-2512.
- M. A. G. Johansson, L.-J. Lindgren, M. Sj?Âstr?Âm, and P. F. Tavares, “MAX IV 3 GeV Storage Ring Magnet Block Production Series Measurement Results”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1157-1159.
- R. Appleby, D. A.-K. Angal-Kalinin, P. Bambade, S. Cavalier, O. Dadoun, and D. Toprek, “Improved 2mrad crossing angle layout for the International Linear Collider”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMN077, pp. 2883-2885.
- M. Sj?Âstr?Âm, M. Eriksson, L.-J. Lindgren, and E. J. Wall?®n, “Corrector Based Determination of Quadrupole Centres”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPC119, pp. 1347-1349.
- P. Ferracin, “Modeling Techniques for Design and Analysis of Superconducting Accelerator Magnets”, in Proc. 10th Int. Computational Accelerator Physics Conf. (ICAP'09), San Francisco, CA, USA, Aug.-Sep. 2009, paper TU3IODN03, pp. 77-82.
- H. M. Miyadera, A. J. Jason, and S. S. Kurennoy, “Simulation of Large Acceptance Linac for Muons”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5REP071, pp. 4941-4943.
- Y. D. Li and K.-B. Liu, “TPS Fast Corrector Magnet Power Converter”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPO019, pp. 3379-3381.
- R. Rossmanith et al., “Superconductive Damping Wigglers for the CLIC Project”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOPAN023, pp. 200-202.
- G. LeBlanc et al., “Status of the MAX-III Storage Ring”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPAG024, pp. 2318-2320.
- Lj. Milinkovic and D. Toprek, “Axial Focusing in the Acceleration Gaps of the Cyclotron”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP138G, pp. 1306-1310.
- Lj. Milinkovic, B. Brajuskovic, and D. Toprek, “Injection and Central Region Studies for the VINCY Cyclotron”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1516-1519.
- D. Shu, P. K. Job, and M. Kuzay, “CVD-Diamond-Based Position Sensitive Photoconductive Detector for High-Flux X-Rays and Gamma Rays”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEA90, pp. 2090-2092.
- H. Tarawneh, ?à. Andersson, M. Bergqvist, M. Brandin, M. Eriksson, and L. Malmgren, “Higher Order Modes in the New 100 and 500 MHz Cavities at MAX-lab”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPLT137, pp. 2158-2160.
- H. Zhang, Y. M. Li, K. X. Liu, F. Wang, and B. C. Zhang, “LLRF Control System for PKU DC-SC Photocathode Injector”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPC097, pp. 304-306.
- N. Vinokurov, O. A. Shevchenko, and V. G. Tcheskidov, “Variable-period Permanent Magnet Undulators”, in Proc. 32nd Int. Free Electron Laser Conf. (FEL'10), Malmö, Sweden, Aug. 2010, paper THOC3, pp. 696-699.
- G. LeBlanc et al., “Status of the MAX-lab Injector Project”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH080, pp. 2278-2280.
- I. V. Davidyuk, O. A. Shevchenko, V. G. Tcheskidov, and N. Vinokurov, “The Prototype of New Variable Period Undulator for Novosibirsk Free Electron Laser.”, in Proc. 37th Int. Free Electron Laser Conf. (FEL'15), Daejeon, Korea, Aug. 2015, pp. 677-680.
- Y. D. Li, Y.-C. Chien, and K.-B. Liu, “TPS Digital Corrector Magnet Power Converter based on FPGA”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPO020, pp. 3382-3384.
- V. Ranjbar, S. Y. Lee, M. Bai, E. Courant, and W. W. MacKay, “Mapping Out the Full Spin Resonance Structure of RHIC”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPAH139, pp. 3177-3179.
- D. Toprek and Lj. Milinkovi, “Design of the Central Region for the Axial Injection in the VINCY Cyclotron”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2361-2364.
- S. Casalbuoni et al., “Investigations of the Thermal Beam Load of a Superconducting In-vacuum Undulator”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPLS122, pp. 3568-3570.
- S. Arai, T. Fujino, T. Fukushima, T. Hattori, E. Tojyo, and N. Tokuda, “Split Coaxial RFQ Linac with Modulated Vane”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3175-3178.
- D. Trbojevic and E. Courant, “Low Emittance Lattices for Electron Storage Rings Revisited”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1000-1003.
- R. Rossmanith et al., “A Year's Experience with a Superconducting Undulator in the Storage Ring ANKA”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPLS123, pp. 3571-3573.
- J. K. Hao et al., “Improving Gradient of 9-cell SRF Cavities at Peking University”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper THP011, pp. 914-916.
- K.-B. Liu, K. T. Hsu, Y. D. Li, and B. S. Wang, “TPS Magnet Power Supply System”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPD075, pp. 3275-3277.
- ?à. Andersson, M. Bergqvist, M. Eriksson, L. Malmgren, and L. Th?Ñnell, “The 100 MHz RF System for MAX-II and MAX-III”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPLE082, pp. 2118-2120.
- M. Eriksson, M. Bergqvist, M. Brandin, L.-J. Lindgren, M. Sj?Âstr?Âm, and S. Thorin, “MAX III Commissioning”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPLS058, pp. 3416-3417.
- C.-Y. Liu and Y. D. Li, “Design and Implementation a Resonant Dc Power Bus”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPD074, pp. 3272-3274.
- Y. D. Menshov, “CALCULATION OF THE VACUUM SYSTEM OF THE MCC 30/15 CYCLOTRON”, in Proc. 21st Russian Particle Accelerator Conf. (RuPAC'08), Zvenigorod, Russia, Sep.-Oct. 2008, paper TUCPH10, pp. XX-XX.
- Z. K. Liu et al., “Operational Experience of the Digital LLRF Control System at the Booster Ring of Taiwan Photon Source”, in Proc. 12th International Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'18), Hsinchu City, Taiwan, Oct. 2018, pp. 204-206.
- I. Davidyuk, O. A. Shevchenko, V. G. Tcheskidov, and N. Vinokurov, “Modeling and Design of the Variable Period and Pole Number Undulator for the Second Stage of the Novosibirsk FEL”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper MOP037, pp. 96-99.
- V. Ranjbar, A. U. Luccio, W. W. MacKay, N. Tsoupas, and S. Y. Lee, “Fitting Helical Snake and Rotator Field Strength Measurements in RHIC”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH077, pp. 3404-3405.
- M. Bai, W. W. MacKay, T. Roser, and V. Ranjbar, “RHIC Spin Flipper Commissioning”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPLE056, pp. 299-301.
- J. Claus, H. N. Brown, M. Month, and A. van Steenbergen, “Multiturn Injection into the Converted AGS”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 342-347.
- L. V. Myshelovka, A. N. Oleinik, and K. A. Vokhmyanina, “Controlling of 10 keV Electron Beam Using Different Dielectric Channels”, presented at the 27th Russian Particle Accelerator Conference (RuPAC2021), Alushta, Crimea, Sep.-Oct. 2021, paper WEPSC47, unpublished.
- I. V. Davidyuk, O. A. Shevchenko, V. G. Tcheskidov, and N. A. Vinokurov, “Variable-Period Variable-Pole Number Hybrid Undulator Design for Novosibirsk THz FEL”, in Proc. 39th Int. Free Electron Laser Conf. (FEL'19), Hamburg, Germany, Aug. 2019, pp. 531-534.
Back to search