Favourites
For Word
[n] C.-Y. Liao et al., “Beam Profiles Analysis for Beam Diagnostic Applications”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC146, pp. 1368-1370.
[n] S. Motonaga, J. Ohnishi, and H. Takebe, “Design of Magnets for the 8 GeV Storage Ring”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1125-1128.
[n] J. L. Navarro Quirante et al., “CALIFES: A Multi-Purpose Electron Beam for Accelerator Technology Tests”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP030, pp. 121-123.
[n] S. Sheynin, F. Lopez, and S. V. Milton, “The APS Direct-Drive Pulsed Septum Magnets”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAP12, pp. 1355-1357.
[n] M. A. Gallilee et al., “Development of Aluminium Vacuum Chambers for the LHC Experiments at CERN”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2354-2356. doi:10.18429/JACoW-IPAC2014-WEPME040
[n] A. Bertarelli et al., “High Energy Beam Impacts on Beam Intercepting Devices: Advanced Numerical Methods and Experimental Set-up”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPS036, pp. 1614-1616.
[n] S. Onuma et al., “Development of Spill Control System for the J-PARC Slow Extraction”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP070, pp. 245-247.
[n] J.-F. Ostiguy and D. E. Johnson, “Three-Dimensional End Effects in Iron Septum Magnets”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAP10, pp. 1349-1351.
[n] D. L. Rubin, “The Challenges of Ultra-low Emittance Damping Rings”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUYB02, pp. 956-960.
[n] V. Lazarev et al., “Technical Overview of the SIEMENS Particle Therapy Accelerator”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPS066, pp. 3577-3579.
[n] A. Bocci et al., “IR Photon Array Detector for Bunch by Bunch Transverse Beam Diagnostics”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper TUPB13, pp. 194-196.
[n] M. Hara, S. H. Be, H. Kamitsubo, R. Nagaoka, S. Sasaki, and T. Wada, “Storage Ring Design for STA SR Project”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 476-479.
[n] K. Tian, W. J. Corbett, X. Huang, and J. A. Safranek, “Low-Energy Intrabeam Scattering Measurements at the Spear3 Storage Ring”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 334-336. doi:10.18429/JACoW-IPAC2014-MOPRO104
[n] H.-S. Kang, M.-H. Cho, J. H. Han, T.-H. Kang, I. S. Ko, and C. H. Yi, “Start to End Simulation of Three Bunch Compressor Lattice for PAL XFEL”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPP062, pp. 1738-1740.
[n] W. M. Roach, D. Beringer, C. Clavero, R. A. Lukaszew, and C. E. Reece, “Investigation of Epitaxial Niobium Thin Films Grown on Different Surfaces Suitable for SRF Cavities”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper THPO062, pp. 874-876.
[n] M. Vossberg, R. M. Brodhage, M. Kaiser, F. Maimone, W. Vinzenz, and S. Yaramyshev, “Design Studies for the Proton-Linac RFQ for FAIR”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3718-3720. doi:10.18429/JACoW-IPAC2015-THPF017
[n] G. Bregliozzi, V. Baglin, J. M. Jimenez, G. Lanza, and T. Porcelli, “Saturation Behaviour of the LHC NEG Coated Beam Pipes”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPD015, pp. 2525-2527.
[n] Y. Alexahin and D. V. Neuffer, “Design of Accumulator and Compressor Rings for the Project-X Based Proton Driver”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPC043, pp. 1260-1262.
[n] L. Brunetti et al., “Vibration Stabilization for a Cantilever Magnet Prototype at the Subnanometer Scale”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC115, pp. 1335-1337.
[n] J. Johnson, R. Rimmer, and J. Corlett, “Computer Simulations of a Wide-Bandwidth Ferrite-Loaded High-Power Waveguide Termination”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPR14, pp. 1818-1820.
[n] Y. Nakazawa et al., “Prototype of an Inter-digital H-mode Drift-tube Linac for Muon Linac”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 180-183. doi:10.18429/JACoW-LINAC2018-MOPO085
[n] U. Wienands, M. H. Donald, and M. E. Biagini, “Betatron-function Measurement in Lattices with 90?? Sections”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPRI003, pp. 1202-1204.
[n] W. Wittmer et al., “Online Modeling of the Rare Isotope Reaccelerator - ReA3”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3195-3197. doi:10.18429/JACoW-IPAC2014-THPRO129
[n] R. Calaga, L. Ficcadenti, E. Métral, R. Tomas, J. Tuckmantel, and F. Zimmermann, “Proton-Beam Emittance Growth in SPS Coasts”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPP007, pp. 3737-3739.
[n] C. H. Kuo et al., “Commissioning Tune Feedback in the Taiwan Light Source”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPO016, pp. 517-519.
For LaTeX
Use Complete Form
For BibTeX
References
- C.-Y. Liao et al., “Beam Profiles Analysis for Beam Diagnostic Applications”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPC146, pp. 1368-1370.
- S. Motonaga, J. Ohnishi, and H. Takebe, “Design of Magnets for the 8 GeV Storage Ring”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1125-1128.
- J. L. Navarro Quirante et al., “CALIFES: A Multi-Purpose Electron Beam for Accelerator Technology Tests”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP030, pp. 121-123.
- S. Sheynin, F. Lopez, and S. V. Milton, “The APS Direct-Drive Pulsed Septum Magnets”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper FAP12, pp. 1355-1357.
- M. A. Gallilee et al., “Development of Aluminium Vacuum Chambers for the LHC Experiments at CERN”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2354-2356.
- A. Bertarelli et al., “High Energy Beam Impacts on Beam Intercepting Devices: Advanced Numerical Methods and Experimental Set-up”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPS036, pp. 1614-1616.
- S. Onuma et al., “Development of Spill Control System for the J-PARC Slow Extraction”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper TUP070, pp. 245-247.
- J.-F. Ostiguy and D. E. Johnson, “Three-Dimensional End Effects in Iron Septum Magnets”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper FAP10, pp. 1349-1351.
- D. L. Rubin, “The Challenges of Ultra-low Emittance Damping Rings”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUYB02, pp. 956-960.
- V. Lazarev et al., “Technical Overview of the SIEMENS Particle Therapy Accelerator”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPS066, pp. 3577-3579.
- A. Bocci et al., “IR Photon Array Detector for Bunch by Bunch Transverse Beam Diagnostics”, in Proc. 9th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'09), Basel, Switzerland, May 2009, paper TUPB13, pp. 194-196.
- M. Hara, S. H. Be, H. Kamitsubo, R. Nagaoka, S. Sasaki, and T. Wada, “Storage Ring Design for STA SR Project”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 476-479.
- K. Tian, W. J. Corbett, X. Huang, and J. A. Safranek, “Low-Energy Intrabeam Scattering Measurements at the Spear3 Storage Ring”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 334-336.
- H.-S. Kang, M.-H. Cho, J. H. Han, T.-H. Kang, I. S. Ko, and C. H. Yi, “Start to End Simulation of Three Bunch Compressor Lattice for PAL XFEL”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPP062, pp. 1738-1740.
- W. M. Roach, D. Beringer, C. Clavero, R. A. Lukaszew, and C. E. Reece, “Investigation of Epitaxial Niobium Thin Films Grown on Different Surfaces Suitable for SRF Cavities”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper THPO062, pp. 874-876.
- M. Vossberg, R. M. Brodhage, M. Kaiser, F. Maimone, W. Vinzenz, and S. Yaramyshev, “Design Studies for the Proton-Linac RFQ for FAIR”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3718-3720.
- G. Bregliozzi, V. Baglin, J. M. Jimenez, G. Lanza, and T. Porcelli, “Saturation Behaviour of the LHC NEG Coated Beam Pipes”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPD015, pp. 2525-2527.
- Y. Alexahin and D. V. Neuffer, “Design of Accumulator and Compressor Rings for the Project-X Based Proton Driver”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPC043, pp. 1260-1262.
- L. Brunetti et al., “Vibration Stabilization for a Cantilever Magnet Prototype at the Subnanometer Scale”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPC115, pp. 1335-1337.
- J. Johnson, R. Rimmer, and J. Corlett, “Computer Simulations of a Wide-Bandwidth Ferrite-Loaded High-Power Waveguide Termination”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WPR14, pp. 1818-1820.
- Y. Nakazawa et al., “Prototype of an Inter-digital H-mode Drift-tube Linac for Muon Linac”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 180-183.
- U. Wienands, M. H. Donald, and M. E. Biagini, “Betatron-function Measurement in Lattices with 90?? Sections”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPRI003, pp. 1202-1204.
- W. Wittmer et al., “Online Modeling of the Rare Isotope Reaccelerator - ReA3”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3195-3197.
- R. Calaga, L. Ficcadenti, E. Métral, R. Tomas, J. Tuckmantel, and F. Zimmermann, “Proton-Beam Emittance Growth in SPS Coasts”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPP007, pp. 3737-3739.
- C. H. Kuo et al., “Commissioning Tune Feedback in the Taiwan Light Source”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPO016, pp. 517-519.
Back to search