Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] A. M. Thakar et al., “Instrumentation Architecture for ITER Diagnostic Neutral Beam Power Supply System”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper THPD40, pp. 214-216.
[n] R. Tighe, “Arc Detection and Interlock Module for the PEP-II Low Level RF System”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 6P036, pp. 2520-2522.
[n] L. Barbagelata et al., “Field Integral Measurements on a Hybrid Permanent Magnet Undulator for F. E. L.”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1356-1359.
[n] B. Laun?®, P. Dambre, J. M. Kaplanski, B. Montsanglant, C. Olivetto, and D. Vincent, “The Diagnostics System for the AGOR Superconducting Cyclotron”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper IXD-06, pp. 487-490.
[n] G. Hochschild et al., “Operation Experiences with the Test Section of a Superconducting Heavy-Ion Post Accelerator”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1150-1153.
[n] A. Dipace, A. Renieri, and E. Sabia, “2D Simulation of FEL Amplifiers”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 555-557.
[n] Y. U. Sohn et al., “Design of Superconducting RF System for PLS-II Upgrade”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEC046, pp. 2992-2994.
[n] N. M. Cook, J. M. Brennan, and S. Peggs, “Harmonic Ratcheting for Fast Acceleration”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPMA25, pp. 1034-1036.
[n] M. Omet et al., “LLRF Operation and Performance at the European XFEL”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1934-1936. doi:10.18429/JACoW-IPAC2018-WEPAF051
[n] M. Bozzolan, “BPM Time of Flight Measurements for Setting-up the RF Cavities of the CERN Linac4”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 879-881. doi:10.18429/JACoW-LINAC2018-THPO084
[n] S.-C. Kim et al., “BPM (Beam Position Monitor) in the PAL Linac and BTL”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper WEPMA050, pp. 393-395.
[n] W. Chou et al., “8 GeV H- Ions: Transport and Injection”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FPAE011, pp. 1222-1224.
[n] M. Castellano et al., “Diagnostic and Control System for the LISA Project”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1018-1021.
[n] N. Gonzalez, C. Colldelram, C. Escudero, and S. Ferrer, “High Frequency UHV Mechanical X-Ray Beam Chopper”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 339-341. doi:10.18429/JACoW-MEDSI2016-WEPE15
[n] P. A. Thompson, S. Aronson, J. G. Cottingham, M. Garber, H. Hahn, and W. B. Sampson, “Internal Trim Coils for CBA Superconducting Magnets”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3372-3375.
[n] G.-T. Park, H. J. Cha, Y. Jung, H. Kim, and W. K. Kim, “The Fabrication of the =0.12 HWR at RISP”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP088, pp. 628-630.
[n] K. Ohmi, Y. Sato, J. Takano, and S. Hatakeyama, “Measurement of Optics Errors and Space Charge Effects”, in Proc. HB'12, Beijing, China, Sep. 2012, paper THO1B03, pp. 517-521.
[n] J. N. Corlett et al., “Impedance and Instabilities in the NLC Damping Rings”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPPH076, pp. 1841-1843.
[n] M. Hamberg et al., “Dielectric Laser Accelerator Investigation, Setup Substrate Manufacturing and Investigation of Effects of Laser Induced Electromigration RF Cavity Breakdown Influences”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3286-3288. doi:10.18429/JACoW-IPAC2017-WEPVA016
[n] T. Kawakubo, S. Murasugi, and E. Nakamura, “KEK-PS Fast-extraction Kicker System and its Operation Results”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP3B03, pp. 2243-2245.
[n] P. J. Spiller, K. Blasche, P. H??lsmann, A. Kraemer, H. Ramakers, and H. R. Sprenger, “High Intensity Uranium Operation in SIS18”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT020, pp. 1180-1182.
[n] C. Peters et al., “Design and Performance of 40mm, 6.5 T, Collared, Cold-Iron Model Magnets”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3728-3731.
[n] K. Jensen, A. Balter, D. W. Feldman, N. A. Moody, and P. G. O, “Photoemission from Coated Surfaces: A Comparison of Theory to Experiment”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper TUPP060, pp. XX-XX.
[n] M. Krasilnikov et al., “Electron Beam Asymmetry Compensation with Gun Quadrupoles at PITZ”, in Proc. FEL'17, Santa Fe, NM, USA, Aug. 2017, pp. 429-431. doi:10.18429/JACoW-FEL2017-WEP007
For LaTeX
Use Complete Form
For BibTeX
References
- A. M. Thakar et al., “Instrumentation Architecture for ITER Diagnostic Neutral Beam Power Supply System”, in Proc. 9th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'12), Kolkata, India, Dec. 2012, paper THPD40, pp. 214-216.
- R. Tighe, “Arc Detection and Interlock Module for the PEP-II Low Level RF System”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 6P036, pp. 2520-2522.
- L. Barbagelata et al., “Field Integral Measurements on a Hybrid Permanent Magnet Undulator for F. E. L.”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1356-1359.
- B. Laun?®, P. Dambre, J. M. Kaplanski, B. Montsanglant, C. Olivetto, and D. Vincent, “The Diagnostics System for the AGOR Superconducting Cyclotron”, in Proc. 13th Int. Cyclotron Conf. and Their Applications (Cyclotrons'92), Vancouver, Canada, Jul. 1992, paper IXD-06, pp. 487-490.
- G. Hochschild et al., “Operation Experiences with the Test Section of a Superconducting Heavy-Ion Post Accelerator”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1150-1153.
- A. Dipace, A. Renieri, and E. Sabia, “2D Simulation of FEL Amplifiers”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 555-557.
- Y. U. Sohn et al., “Design of Superconducting RF System for PLS-II Upgrade”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEC046, pp. 2992-2994.
- N. M. Cook, J. M. Brennan, and S. Peggs, “Harmonic Ratcheting for Fast Acceleration”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPMA25, pp. 1034-1036.
- M. Omet et al., “LLRF Operation and Performance at the European XFEL”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1934-1936.
- M. Bozzolan, “BPM Time of Flight Measurements for Setting-up the RF Cavities of the CERN Linac4”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 879-881.
- S.-C. Kim et al., “BPM (Beam Position Monitor) in the PAL Linac and BTL”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper WEPMA050, pp. 393-395.
- W. Chou et al., “8 GeV H- Ions: Transport and Injection”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper FPAE011, pp. 1222-1224.
- M. Castellano et al., “Diagnostic and Control System for the LISA Project”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1018-1021.
- N. Gonzalez, C. Colldelram, C. Escudero, and S. Ferrer, “High Frequency UHV Mechanical X-Ray Beam Chopper”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 339-341.
- P. A. Thompson, S. Aronson, J. G. Cottingham, M. Garber, H. Hahn, and W. B. Sampson, “Internal Trim Coils for CBA Superconducting Magnets”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3372-3375.
- G.-T. Park, H. J. Cha, Y. Jung, H. Kim, and W. K. Kim, “The Fabrication of the =0.12 HWR at RISP”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP088, pp. 628-630.
- K. Ohmi, Y. Sato, J. Takano, and S. Hatakeyama, “Measurement of Optics Errors and Space Charge Effects”, in Proc. 52nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'12), Beijing, China, Sep. 2012, paper THO1B03, pp. 517-521.
- J. N. Corlett et al., “Impedance and Instabilities in the NLC Damping Rings”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPPH076, pp. 1841-1843.
- M. Hamberg et al., “Dielectric Laser Accelerator Investigation, Setup Substrate Manufacturing and Investigation of Effects of Laser Induced Electromigration RF Cavity Breakdown Influences”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3286-3288.
- T. Kawakubo, S. Murasugi, and E. Nakamura, “KEK-PS Fast-extraction Kicker System and its Operation Results”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper MOP3B03, pp. 2243-2245.
- P. J. Spiller, K. Blasche, P. H??lsmann, A. Kraemer, H. Ramakers, and H. R. Sprenger, “High Intensity Uranium Operation in SIS18”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPLT020, pp. 1180-1182.
- C. Peters et al., “Design and Performance of 40mm, 6.5 T, Collared, Cold-Iron Model Magnets”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3728-3731.
- K. Jensen, A. Balter, D. W. Feldman, N. A. Moody, and P. G. O, “Photoemission from Coated Surfaces: A Comparison of Theory to Experiment”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper TUPP060, pp. XX-XX.
- M. Krasilnikov et al., “Electron Beam Asymmetry Compensation with Gun Quadrupoles at PITZ”, in Proc. 38th Int. Free Electron Laser Conf. (FEL'17), Santa Fe, NM, USA, Aug. 2017, pp. 429-431.
Back to search