Favourites
For Word
[n] N. Akasaka, T. Kageyama, and Y. Yamazaki, “Higher Order Mode Characteristics of the Choke Mode Cavity for KEK B-Factory (KEKB)”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2137-2140.
[n] Y. Iwashita, “Disk-and-Washer Linac Structure with T Supports”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TH4-34, pp. 701-703.
[n] C. Milardi et al., “A Review of DANE Performances During the KLOE-2 Run”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 624-627. doi:10.18429/JACoW-IPAC2018-TUYGBD2
[n] N. Akasaka, H. Koiso, and K. Oide, “Operation Software for Commissioning of KEKB Linac Programmed with SAD”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5D043, pp. 495-497.
[n] F. Meot et al., “Modelling of the AGS Using Zgoubi - Status”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPZ039, pp. 1897-1899.
[n] R. Tom?ís, M. Aiba, A. Nadji, L. S. Nadolski, M.-A. Tordeux, and G. Vanbavinckhove, “Linear and Non-Linear Optics Measurements at SOLEIL”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6PFP075, pp. 3877-3879.
[n] J. K. Jones, “Tuning Algorithms for the ILC Damping Rings”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPLS140, pp. 888-890.
[n] V. Forte, J. L. Abelleira, E. Benedetto, C. Bracco, M. Cieslak-Kowalska, and G. P. Di Giovanni, “3D Emittances Tailoring Techniques and Optimization with Space Charge for the Future CERN PS Booster Operations with Linac4”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 660-663. doi:10.18429/JACoW-IPAC2016-MOPOR025
[n] E. Pozdeyev et al., “Progress Report on the Small Isochronous Ring Project at NSCL”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TOAA012, pp. 138-140.
[n] M. E. Biagini et al., “DANE Phi-Factory Upgrade for Siddharta Run”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOOBKI02, pp. 66-68.
[n] X. Gu et al., “Commissioning RHIC's Electron Lens”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper TUOCA2, pp. 416-418.
[n] C. E. Montanari, D. Di Croce, M. Giovannozzi, T. Pieloni, S. Redaelli, and F. Van der Veken, “Xboinc: A framework for volunteer-based beam dynamics simulations using Xsuite”, presented at the IPAC'26, Deauville, France, May 2026, paper WEP5137, unpublished.
[n] B. R. Poole, J. R. Harris, and S. V. Milton, “Photonic Crystal as a Passively Driven Structure to Boost Beam Energy”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPAC07, pp. 87-89.
[n] M. G. Konrad, D. G. Maxwell, and G. Shen, “Continuous Integration and Continuous Delivery at FRIB”, in Proc. PCaPAC'16, Campinas, Brazil, Oct. 2016, pp. 145-147. doi:10.18429/JACoW-PCAPAC2016-FRITPLCO01
[n] T. Kageyama, N. Akasaka, Y. Takeuchi, and Y. Yamazaki, “Design of a Prototype of RF Cavity for the KEK B-Factory (KEKB)”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2098-2101.
[n] E. Cenni et al., “Vertical Test Results on ESS Medium and High Beta Elliptical Cavity Prototypes Equipped with Helium Tank”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 948-950. doi:10.18429/JACoW-IPAC2017-MOPVA041
[n] H. Ida et al., “Design of an Intense Positron Source for Linear Colliders”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TU-04, pp. 366-368.
[n] Y. Gao et al., “Exploratory Data Analysis on the RHIC Cryogenics System Compressor Dataset”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 907-912. doi:10.18429/JACoW-ICALEPCS2023-TUPDP138
[n] F. Zhu, K. X. Liu, S. W. Quan, F. Wang, and H. T. X. Zhong, “Beam Energy Loss in a =0.09 SRF HWR Cavity for 100 mA Proton Acceleration”, in Proc. HB'16, Malmö, Sweden, Jul. 2016, pp. 567-570. doi:10.18429/JACoW-HB2016-THPM8Y01
[n] F. Meot et al., “AGS Model in Zgoubi. RHIC Run 13 Polarization Modeling. Status.”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPEA082, pp. 2699-2701.
[n] S. Choroba, “The High Power RF System for the European XFEL”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 601-604. doi:10.18429/JACoW-LINAC2018-WE1A04
[n] A. Salom et al., “Digital LLRF for IFMIF-EVEDA”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC160, pp. 457-459.
[n] A. P. Letchford et al., “Status of the RAL Front End Test Stand”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPWO086, pp. 3963-3965.
[n] F. Chiurlotto, L. Bertazzo, G. Bisoffi, and A. M. Porcellato, “RF Aspects in the Development of SRFQs at LNL”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97C22, pp. 615-622.
[n] S. Atieh et al., “Mechanical Design and Fabrication Studies for SPL Superconducting RF Cavities”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC053, pp. 199-201.
[n] J. Munilla et al., “Design, Manufacturing and Tests of Closed-loop Quadrupole Mover Prototypes for European XFEL”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPO026, pp. 535-537.
[n] D. C. Plostinar and M. A. Clarke-Gayther, “Re-bunching RF Cavities and Hybrid Quadrupoles for the RAL Front-end Test Stand (FETS)”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH113, pp. 306-308.
[n] M. Ikegami and S. Machida, “Coherent Mode Analysis of High Intensity Beams in Synchrotrons”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THOB02A, pp. 282-286.
[n] T. Saeki et al., “R&D for the Sponge Cleaning of Superconducting RF Cavity”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP072, pp. 990-992.
For LaTeX
Use Complete Form
For BibTeX
References
- N. Akasaka, T. Kageyama, and Y. Yamazaki, “Higher Order Mode Characteristics of the Choke Mode Cavity for KEK B-Factory (KEKB)”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2137-2140.
- Y. Iwashita, “Disk-and-Washer Linac Structure with T Supports”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TH4-34, pp. 701-703.
- C. Milardi et al., “A Review of DANE Performances During the KLOE-2 Run”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 624-627.
- N. Akasaka, H. Koiso, and K. Oide, “Operation Software for Commissioning of KEKB Linac Programmed with SAD”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 5D043, pp. 495-497.
- F. Meot et al., “Modelling of the AGS Using Zgoubi - Status”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPZ039, pp. 1897-1899.
- R. Tom?ís, M. Aiba, A. Nadji, L. S. Nadolski, M.-A. Tordeux, and G. Vanbavinckhove, “Linear and Non-Linear Optics Measurements at SOLEIL”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6PFP075, pp. 3877-3879.
- J. K. Jones, “Tuning Algorithms for the ILC Damping Rings”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPLS140, pp. 888-890.
- V. Forte, J. L. Abelleira, E. Benedetto, C. Bracco, M. Cieslak-Kowalska, and G. P. Di Giovanni, “3D Emittances Tailoring Techniques and Optimization with Space Charge for the Future CERN PS Booster Operations with Linac4”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 660-663.
- E. Pozdeyev et al., “Progress Report on the Small Isochronous Ring Project at NSCL”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TOAA012, pp. 138-140.
- M. E. Biagini et al., “DANE Phi-Factory Upgrade for Siddharta Run”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOOBKI02, pp. 66-68.
- X. Gu et al., “Commissioning RHIC's Electron Lens”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper TUOCA2, pp. 416-418.
- C. E. Montanari, D. Di Croce, M. Giovannozzi, T. Pieloni, S. Redaelli, and F. Van der Veken, “Xboinc: A framework for volunteer-based beam dynamics simulations using Xsuite”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper WEP5137, this conference.
- B. R. Poole, J. R. Harris, and S. V. Milton, “Photonic Crystal as a Passively Driven Structure to Boost Beam Energy”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPAC07, pp. 87-89.
- M. G. Konrad, D. G. Maxwell, and G. Shen, “Continuous Integration and Continuous Delivery at FRIB”, in Proc. 11th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'16), Campinas, Brazil, Oct. 2016, pp. 145-147.
- T. Kageyama, N. Akasaka, Y. Takeuchi, and Y. Yamazaki, “Design of a Prototype of RF Cavity for the KEK B-Factory (KEKB)”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2098-2101.
- E. Cenni et al., “Vertical Test Results on ESS Medium and High Beta Elliptical Cavity Prototypes Equipped with Helium Tank”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 948-950.
- H. Ida et al., “Design of an Intense Positron Source for Linear Colliders”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TU-04, pp. 366-368.
- Y. Gao et al., “Exploratory Data Analysis on the RHIC Cryogenics System Compressor Dataset”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper TUPDP138, pp. 907-912.
- F. Zhu, K. X. Liu, S. W. Quan, F. Wang, and H. T. X. Zhong, “Beam Energy Loss in a =0.09 SRF HWR Cavity for 100 mA Proton Acceleration”, in Proc. 57th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'16), Malmö, Sweden, Jul. 2016, pp. 567-570.
- F. Meot et al., “AGS Model in Zgoubi. RHIC Run 13 Polarization Modeling. Status.”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPEA082, pp. 2699-2701.
- S. Choroba, “The High Power RF System for the European XFEL”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 601-604.
- A. Salom et al., “Digital LLRF for IFMIF-EVEDA”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPC160, pp. 457-459.
- A. P. Letchford et al., “Status of the RAL Front End Test Stand”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPWO086, pp. 3963-3965.
- F. Chiurlotto, L. Bertazzo, G. Bisoffi, and A. M. Porcellato, “RF Aspects in the Development of SRFQs at LNL”, in Proc. 8th Int. Conf. RF Superconductivity (SRF'97), Padova, Italy, Oct. 1997, paper SRF97C22, pp. 615-622.
- S. Atieh et al., “Mechanical Design and Fabrication Studies for SPL Superconducting RF Cavities”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPC053, pp. 199-201.
- J. Munilla et al., “Design, Manufacturing and Tests of Closed-loop Quadrupole Mover Prototypes for European XFEL”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPO026, pp. 535-537.
- D. C. Plostinar and M. A. Clarke-Gayther, “Re-bunching RF Cavities and Hybrid Quadrupoles for the RAL Front-end Test Stand (FETS)”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPCH113, pp. 306-308.
- M. Ikegami and S. Machida, “Coherent Mode Analysis of High Intensity Beams in Synchrotrons”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper THOB02A, pp. 282-286.
- T. Saeki et al., “R&D for the Sponge Cleaning of Superconducting RF Cavity”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5PFP072, pp. 990-992.
Back to search