Favourites
For Word
[n] J. Wolfenden et al., “Application of Virtual Diagnostics in the FEBE Clara User Area”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 231-234. doi:10.18429/JACoW-LINAC2022-MOPORI05
[n] N. Avreline, D. Gregoire, K. Piletskiy, and V. Zvyagintsev, “Test stand for conditioning high power tetrodes at TRIUMF”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2973-2975. doi:10.18429/JACoW-IPAC2023-WEPA133
[n] E. Colby, V. Bharadwaj, J. F. Ostiguy, T. Nicol, M. Conde, and J. Rosenzweig, “Design and Construction of High Brightness RF Photoinjectors for TESLA”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPB08, pp. 967-969.
[n] D. Rees, M. Lynch, A. Regan, and A. Reass, “The Spallation Neutron Source (SNS) Linac RF System”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper THE01, pp. 965-967.
[n] H. Carter et al., “Automated Microwave Low Power Testing Techniques for NLC”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TH471, pp. 761-763.
[n] L. S. Shao et al., “Vacuum Laser Acceleration at BNL-ATF”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6RFP096, pp. 3022-3024.
[n] F. Babagoli Moziraji, H. Afarideh, M. Dehghan, and F. Ghasemi, “Design of 71 MHz Power Amplifier in a Single-ended Architecture for IRANCYC-10 Cyclotron”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2325-2327. doi:10.18429/JACoW-IPAC2021-TUPAB350
[n] B. Ledroit and K. Aulenbacher, “Collimation of Target Induced Halo Following MAGIX at MESA”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3839-3842. doi:10.18429/JACoW-IPAC2019-THPRB019
[n] R. A. Sacks and E. P. Colton, “Improvements to PARMILA”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2443-2446.
[n] P. Gagliardi et al., “Large Scale Production at Ansaldo of 352 MHz Niobium Coated LEP-CERN Cavities: Development Activities and First Results”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1063-1066.
[n] Y. Jiang, M. Gai, J. Hirshfield, M. Palmer, and S. Shchelkunov, “Novel deuteron accelerator for nuclear waste transmutation”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 1564-1566. doi:10.18429/JACoW-IPAC2025-TUPS059
[n] X. Wu, U. Wienands, T. Hunter, R. York, and S. Sheynin, “Extraction System Design for the SSC Low Energy Booster”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 393-396.
[n] G.-Y. Hsiung, Y.-C. Yang, F.-Y. Chang, C.-C. Chang, and C.-K. Chan, “Setup of Goubau Line system for impedance-measurement of vacuum components at the NSRRC”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1578-1581. doi:10.18429/JACoW-IPAC2024-TUPR64
[n] I. E. Campisi et al., “4.2 K Operation of the SNS Cryomodules”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAT085, pp. 4173-4175.
[n] F. Pan et al., “Nb Sputtered 325 MHz QWR Cavities for CiADS”, in Proc. HIAT'18, Lanzhou, China, Oct. 2018, pp. 145-147. doi:10.18429/JACoW-HIAT2018-WEPB06
[n] W. D. Cornelius, “Design and Performance of the Inter-RFQ Beam Transport and Matching Section for the SAIC PET Isotope Production Accelerator”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2994-2997.
[n] I.-C. Sheng and Y.-M. Hsiao, “Evaluating the feasibility of TPS high heat load components for high-current operation using TMSI”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 979-982. doi:10.18429/JACoW-IPAC2025-TUPB015
[n] S. Bolton et al., “Development of a second-generation system for the reliable distribution of machine protection parameters”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3401-3404. doi:10.18429/JACoW-IPAC2024-THPG60
[n] D. Proft, K. Desch, D. Elsner, and M. T. Switka, “Upgrade of the 25 MW RF Station for the Linear Accelerator LINAC2 at ELSA”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 838-840. doi:10.18429/JACoW-IPAC2022-TUPOST002
[n] R. J. England et al., “Photonic Bandgap Fiber Wakefield Experiment at SLAC”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6RFP088, pp. 3004-3006.
[n] E. Rogers, B. Terzic, E. Breen, E. Johnson, and G. Krafft, “Numerical simulations of radiation reaction using Lorentz-Abraham-Dirac formalism”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2831-2833. doi:10.18429/JACoW-IPAC2023-WEPA080
[n] Z. Wu, L.-P. Hsu, S.-H. Lee, C.-Y. Liao, J.-K. Liao, and C. Wu, “Implementation of EPU66S control system at the Taiwan Photon Source”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 2956-2959. doi:10.18429/JACoW-IPAC2025-THPS008
[n] N. Tani et al., “Design of a Dipole Magnet for the 3-GeV Proton Synchrotron of the JAERI/KEK Joint Project”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPDO028, pp. 2376-2378.
[n] D. L. Hall, C. D. Burton, and M. Liepe, “Sample Plate Studies Using a High Field TE Cavity With Thermometry Mapping System”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper THPP018, pp. 873-875.
[n] M. Paraliev, M. Aiba, S. Dordevic, C. H. Gough, and A. Streun, “Development of Fast and Super-Fast Kicker System for SLS 2.0 Injection”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2889-2892. doi:10.18429/JACoW-IPAC2021-WEPAB122
[n] D. C. Larbalestier and P. J. Lee, “New Developments in Niobium Titanium Superconductors”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPE01, pp. 1276-1281.
[n] D. Rees, M. Lynch, and P. Tallerico, “Accelerator Production of Tritium 700 MHz and 350 MHz Klystron Test Results”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper MO4075, pp. 231-233.
[n] S. Barber, “Demonstration of a reliable, high gain laser plasma accelerator driven free electron laser at BELLA”, presented at the NAPAC'25, Sacramento, California, USA, Aug. 2025, paper TUXN03, unpublished.
[n] T. Spickermann, M. J. Borden, C. S. Feigerle, R. J. Macek, R. W. Shaw, and I. Sugai, “Comparison of Graphite and Diamond Structured Carbon Stripper Foils under Operational Conditions at the Los Alamos PSR”, in Proc. HB'06, Tsukuba, Japan, May-Jun. 2006, paper TUAZ05, pp. 112-116.
[n] E. Colby et al., “Experimental Testing of the TTF RF Photoinjector”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4W020, pp. 2873-2875.
[n] I. S. Roth and J. A. Nation, “Characteristics and Transport of a Proton Beam Generated in a Linear Induction Accelerator”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2853-2856.
[n] U. Schwanke et al., “Control, Readout and Monitoring for the Medium-Sized Telesopes in the Cherenkov Telescope Array”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 77-83. doi:10.18429/JACoW-ICALEPCS2021-MOBR02
[n] D. F. Sutter et al., “Coherent Phenomena over a Broad Range of Beam Intensities in the Electron Storage Ring UMER”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5PFP063, pp. 4455-4457.
[n] A. Nassiri, J. Song, and R. Daly, “A Beamline Design and Data Acquisition with the 20-MeV, 20-ps Electron Beam for the Higher-Order Mode Studies of the APS SR-RF Cavities”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2142-2145.
[n] A. Santrich Badal et al., “Field Quality and Hysteresis of LHC Superconducting Corrector Magnets”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPKF006, pp. 1600-1602.
[n] E. Nichelatti, M. D. Astorino, F. Borgognoni, and C. Ronsivalle, “An iterative algorithm to estimate the energy spectrum of an electron beam from PDD curves”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 814-817. doi:10.18429/JACoW-IPAC2023-MOPL111
[n] C.-Y. Liao et al., “Motion protection framework for TPS insertion device control”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 3040-3042. doi:10.18429/JACoW-IPAC2025-THPS034
[n] J. A. Uythoven, J. I. M. Botman, and H. L. Hagedoorn, “Analytical Evaluation of Synchrotron Radiation Integrals for Isomagnetic Lattices with Rectangular Dipole Magnets”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 649-651.
[n] A. Loulergue et al., “TDR Baseline Lattice for the Upgrade of SOLEIL”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1393-1396. doi:10.18429/JACoW-IPAC2022-TUPOMS004
[n] F. Poulet et al., “AIRIX Measurement Chain Optimization For Electron Beam Dynamic and Dimensional Characteristics Analysis”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper WEPPD059, pp. 677-679.
[n] B. Wu, J. Wu, W. Long, X. Li, and X. Nie, “Magnetic alloy core loaded 2nd harmonic cavity design and testing for CSNS-II RCS”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2944-2946. doi:10.18429/JACoW-IPAC2023-WEPA121
[n] M. Reiser et al., “The Maryland Electron Ring for Investigating Space-Charge Dominated Beams in a Circular FODO System”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUCR3, pp. 234-236.
[n] J. Lyles, C. Friedrichs, and M. Lynch, “New High Power 200 MHz RF System for the LANSCE Drift Tube Linac”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper MO4074, pp. 228-230.
[n] J. D. Schneider and K. C. D. Chan, “Progress Update on the Low-Energy Demonstration Accelerator (LEDA)”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5W024, pp. 1168-1170.
[n] E. C. Longhi, A. I. Baldwin, S. P. Mhaskar, J. C. Schouten, and C. W. Thompson, “Overview of Diamond IDs for Phase 1”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS128, pp. 3586-3588.
[n] J. Andersson, F. Curbis, M. Kotur, F. Lindau, S. Thorin, and S. Werin, “Emittance Improvements in the MAX IV Photocathode Injector”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1533-1536. doi:10.18429/JACoW-IPAC2017-TUPAB094
[n] S. Shen and L. S. Tung, “Vacuum Simulation of RF Cavities to Optimize Pump Configurations”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA127, pp. 1372-1374.
For LaTeX
Use Complete Form
For BibTeX
References
- J. Wolfenden et al., “Application of Virtual Diagnostics in the FEBE Clara User Area”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 231-234.
- N. Avreline, D. Gregoire, K. Piletskiy, and V. Zvyagintsev, “Test stand for conditioning high power tetrodes at TRIUMF”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA133, pp. 2973-2975.
- E. Colby, V. Bharadwaj, J. F. Ostiguy, T. Nicol, M. Conde, and J. Rosenzweig, “Design and Construction of High Brightness RF Photoinjectors for TESLA”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WPB08, pp. 967-969.
- D. Rees, M. Lynch, A. Regan, and A. Reass, “The Spallation Neutron Source (SNS) Linac RF System”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper THE01, pp. 965-967.
- H. Carter et al., “Automated Microwave Low Power Testing Techniques for NLC”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper TH471, pp. 761-763.
- L. S. Shao et al., “Vacuum Laser Acceleration at BNL-ATF”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6RFP096, pp. 3022-3024.
- F. Babagoli Moziraji, H. Afarideh, M. Dehghan, and F. Ghasemi, “Design of 71 MHz Power Amplifier in a Single-ended Architecture for IRANCYC-10 Cyclotron”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2325-2327.
- B. Ledroit and K. Aulenbacher, “Collimation of Target Induced Halo Following MAGIX at MESA”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3839-3842.
- R. A. Sacks and E. P. Colton, “Improvements to PARMILA”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2443-2446.
- P. Gagliardi et al., “Large Scale Production at Ansaldo of 352 MHz Niobium Coated LEP-CERN Cavities: Development Activities and First Results”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1063-1066.
- Y. Jiang, M. Gai, J. Hirshfield, M. Palmer, and S. Shchelkunov, “Novel deuteron accelerator for nuclear waste transmutation”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPS059, pp. 1564-1566.
- X. Wu, U. Wienands, T. Hunter, R. York, and S. Sheynin, “Extraction System Design for the SSC Low Energy Booster”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 393-396.
- G.-Y. Hsiung, Y.-C. Yang, F.-Y. Chang, C.-C. Chang, and C.-K. Chan, “Setup of Goubau Line system for impedance-measurement of vacuum components at the NSRRC”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPR64, pp. 1578-1581.
- I. E. Campisi et al., “4.2 K Operation of the SNS Cryomodules”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAT085, pp. 4173-4175.
- F. Pan et al., “Nb Sputtered 325 MHz QWR Cavities for CiADS”, in Proc. 14th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'18), Lanzhou, China, Oct. 2018, pp. 145-147.
- W. D. Cornelius, “Design and Performance of the Inter-RFQ Beam Transport and Matching Section for the SAIC PET Isotope Production Accelerator”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2994-2997.
- I.-C. Sheng and Y.-M. Hsiao, “Evaluating the feasibility of TPS high heat load components for high-current operation using TMSI”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPB015, pp. 979-982.
- S. Bolton et al., “Development of a second-generation system for the reliable distribution of machine protection parameters”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPG60, pp. 3401-3404.
- D. Proft, K. Desch, D. Elsner, and M. T. Switka, “Upgrade of the 25 MW RF Station for the Linear Accelerator LINAC2 at ELSA”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 838-840.
- R. J. England et al., “Photonic Bandgap Fiber Wakefield Experiment at SLAC”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6RFP088, pp. 3004-3006.
- E. Rogers, B. Terzic, E. Breen, E. Johnson, and G. Krafft, “Numerical simulations of radiation reaction using Lorentz-Abraham-Dirac formalism”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA080, pp. 2831-2833.
- Z. Wu, L.-P. Hsu, S.-H. Lee, C.-Y. Liao, J.-K. Liao, and C. Wu, “Implementation of EPU66S control system at the Taiwan Photon Source”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPS008, pp. 2956-2959.
- N. Tani et al., “Design of a Dipole Magnet for the 3-GeV Proton Synchrotron of the JAERI/KEK Joint Project”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPDO028, pp. 2376-2378.
- D. L. Hall, C. D. Burton, and M. Liepe, “Sample Plate Studies Using a High Field TE Cavity With Thermometry Mapping System”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper THPP018, pp. 873-875.
- M. Paraliev, M. Aiba, S. Dordevic, C. H. Gough, and A. Streun, “Development of Fast and Super-Fast Kicker System for SLS 2.0 Injection”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2889-2892.
- D. C. Larbalestier and P. J. Lee, “New Developments in Niobium Titanium Superconductors”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TPE01, pp. 1276-1281.
- D. Rees, M. Lynch, and P. Tallerico, “Accelerator Production of Tritium 700 MHz and 350 MHz Klystron Test Results”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper MO4075, pp. 231-233.
- S. Barber, “Demonstration of a reliable, high gain laser plasma accelerator driven free electron laser at BELLA”, presented at the 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, paper TUXN03, unpublished.
- T. Spickermann, M. J. Borden, C. S. Feigerle, R. J. Macek, R. W. Shaw, and I. Sugai, “Comparison of Graphite and Diamond Structured Carbon Stripper Foils under Operational Conditions at the Los Alamos PSR”, in Proc. 39th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'06), Tsukuba, Japan, May-Jun. 2006, paper TUAZ05, pp. 112-116.
- E. Colby et al., “Experimental Testing of the TTF RF Photoinjector”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 4W020, pp. 2873-2875.
- I. S. Roth and J. A. Nation, “Characteristics and Transport of a Proton Beam Generated in a Linear Induction Accelerator”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2853-2856.
- U. Schwanke et al., “Control, Readout and Monitoring for the Medium-Sized Telesopes in the Cherenkov Telescope Array”, in Proc. 18th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'21), Shanghai, China, Oct. 2021, pp. 77-83.
- D. F. Sutter et al., “Coherent Phenomena over a Broad Range of Beam Intensities in the Electron Storage Ring UMER”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5PFP063, pp. 4455-4457.
- A. Nassiri, J. Song, and R. Daly, “A Beamline Design and Data Acquisition with the 20-MeV, 20-ps Electron Beam for the Higher-Order Mode Studies of the APS SR-RF Cavities”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2142-2145.
- A. Santrich Badal et al., “Field Quality and Hysteresis of LHC Superconducting Corrector Magnets”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPKF006, pp. 1600-1602.
- E. Nichelatti, M. D. Astorino, F. Borgognoni, and C. Ronsivalle, “An iterative algorithm to estimate the energy spectrum of an electron beam from PDD curves”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPL111, pp. 814-817.
- C.-Y. Liao et al., “Motion protection framework for TPS insertion device control”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPS034, pp. 3040-3042.
- J. A. Uythoven, J. I. M. Botman, and H. L. Hagedoorn, “Analytical Evaluation of Synchrotron Radiation Integrals for Isomagnetic Lattices with Rectangular Dipole Magnets”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 649-651.
- A. Loulergue et al., “TDR Baseline Lattice for the Upgrade of SOLEIL”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1393-1396.
- F. Poulet et al., “AIRIX Measurement Chain Optimization For Electron Beam Dynamic and Dimensional Characteristics Analysis”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper WEPPD059, pp. 677-679.
- B. Wu, J. Wu, W. Long, X. Li, and X. Nie, “Magnetic alloy core loaded 2nd harmonic cavity design and testing for CSNS-II RCS”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA121, pp. 2944-2946.
- M. Reiser et al., “The Maryland Electron Ring for Investigating Space-Charge Dominated Beams in a Circular FODO System”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUCR3, pp. 234-236.
- J. Lyles, C. Friedrichs, and M. Lynch, “New High Power 200 MHz RF System for the LANSCE Drift Tube Linac”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper MO4074, pp. 228-230.
- J. D. Schneider and K. C. D. Chan, “Progress Update on the Low-Energy Demonstration Accelerator (LEDA)”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 5W024, pp. 1168-1170.
- E. C. Longhi, A. I. Baldwin, S. P. Mhaskar, J. C. Schouten, and C. W. Thompson, “Overview of Diamond IDs for Phase 1”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPLS128, pp. 3586-3588.
- J. Andersson, F. Curbis, M. Kotur, F. Lindau, S. Thorin, and S. Werin, “Emittance Improvements in the MAX IV Photocathode Injector”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1533-1536.
- S. Shen and L. S. Tung, “Vacuum Simulation of RF Cavities to Optimize Pump Configurations”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUA127, pp. 1372-1374.
Back to search