JaCoW Logo

Reference Search

Warning
Please note that we have recently received feedback indicated that atleast one of these reference may have a problem.

The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	S. A. Gavrilov, A. Feschenko, P. I. Reinhardt-Nickoulin, and I. V. Vasilyev, “Beam Cross Section Monitor for INR Linac”, in Proc. LINAC'10, Tsukuba, Japan, Sep. 2010, paper TUP085, pp. 605-607. 
[n]	A. DeSimone et al., “Design study for a transverse deflecting cavity based de-chirper”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper TUPM015, unpublished. 
[n]	P. Huelsmann, H.-W. Glock, H. Klein, and M. Kurz, “Determination of Field Strength and Quality Factor of Heavily HOM Damped Accelerator Cavities”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1307-1310. 
[n]	J. Kamiya et al., “Improvements of Vacuum System in J-PARC 3 GeV Synchrotron”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3408-3411. doi:10.18429/JACoW-IPAC2017-WEPVA062
[n]	J. G. M. Kleeven et al., “The IBA Superconducting Synchrocyclotron Project S2C2”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper MO4PB02, pp. 115-119. 
[n]	H. Braun, K. Huebner, and W. Joho, “Decay Rates and Average Luminosity in a B-Factory”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 141-144. 
[n]	Z. Zhao, S. Liu, and C. H. Wang, “BEPCII EPICS Data Archiving and Retrieving System”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEP002, pp. 411-413. 
[n]	Y. Chung, D. Barr, G. Decker, K. Evans Jr., and E. Kahana, “Sensitivity and Offset Calibration for the Beam Position Monitors at the Advanced Photon Source”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPQ03, pp. 2452-2454. 
[n]	J. M. Potter, “A Resonantly Coupled, Waveguide RF Power Manifold for Linear Accelerators”, in Proc. LINAC'76, Chalk River, Canada, Sep. 1976, paper F10, pp. 362-362. 
[n]	H. Kaji et al., “New Event Timing System for Damping Ring at SuperKEKB”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 629-632. doi:10.18429/JACoW-ICALEPCS2015-WEC3O04
[n]	D. Seal et al., “Upgraded multiprobe sample inserts for thin film SRF cavity developments”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2775-2778. doi:10.18429/JACoW-IPAC2024-WEPS38
[n]	M. Vadrucci et al., “Diagnostics Methods for the Medium Energy Proton Beam Extracted by the TOP IMPLART Linear Accelerator”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4673-4675. doi:10.18429/JACoW-IPAC2017-THPVA091
[n]	Q. Qin et al., “Overview of ESRF-EBS's four-year operation and strategy for further upgrade”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper MOPS052, unpublished. 
[n]	J. Cai et al., “High Level Software for 4.8 Ghz LHC Schottky System”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP218, pp. 507-509. 
[n]	R. L. Warnock, “Coherent Synchrotron Radiation and Space Charge for a 1-D Bunch on an Arbitrary Planar Orbit”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMS083, pp. 4255-4257. 
[n]	I. Hwang et al., “Coupling Diagnostics and Control at PLS Storage Ring”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPE011, pp. 4533-4535. 
[n]	E. Bozoki, A. Friedman, and S. Ramamoorthy, “First Results with a Nonlinear Digital Orbit Feedback System at the NSLS”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPQ14, pp. 2696-2698. 
[n]	L. K. Mestha and C. W. Planner, “Application of System Identification Techniques to an RF Cavity Tuning Loop”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 982-985. 
[n]	A. Denker et al., “Status of the HZB Cyclotron”, in Proc. Cyclotrons'19, Cape Town, South Africa, Sep. 2019, pp. 253-255. doi:10.18429/JACoW-CYCLOTRONS2019-TUC02
[n]	D. M. Zhou and K. Ohmi, “Interference of CSR Fields in a Curved Waveguide”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPS007, pp. 604-606. 
[n]	J. R. Nelson et al., “National Ignition Facility (NIF) Dilation X-ray Imager (DIXI) Diagnostic Instrumentation and Control System”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC073, pp. 751-754. 
[n]	C. Mitsuda, T. Honiden, K. Kobayashi, T. Kobayashi, S. Sasaki, and N. Sekine, “Solid-state Compact Kicker Pulsar using Strip-line Type Blumlein with SIC-MOSFET in Spring-8”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3585-3587. doi:10.18429/JACoW-IPAC2016-THPMW020
[n]	J. Allinger, G. Danby, J. Jackson, and A. Prodell, “High Precision Superconducting Magnets”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1299-1303. 
[n]	A. A. Pryanichnikov, M. A. Belikhin, A. P. Chernyaev, V. Rykalin, A. E. Shemyakov, and P. B. Zhogolev, “Development of the Low Intensity Extraction Beam Control System at Protom Synchrotron for Proton Radiography Implementation”, in Proc. RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, pp. 439-442. doi:10.18429/JACoW-RuPAC2021-WEPSC55
[n]	F. Roncarolo, C. Carli, M. Chanel, L. D. Dumas, and R. Scrivens, “Design and Validation with Measurements of the LEIR Injection Line”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPCH046, pp. 2020-2022. 
[n]	J. Rose, R. Biscardi, W. Broome, R. D, J. Keane, and J. M. Wang, “Diagnosis and Cure of a Transverse Instability in the NSLS VUV Ring”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1794-1797. 
[n]	H. A. Day, M. J. Barnes, F. Caspers, E. M?®tral, B. Salvant, and R. M. Jones, “Evaluation of the Beam Coupling Impedance of New beam Screen Designs for the LHC Injection Kicker Magnets”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPME033, pp. 1649-1651. 
[n]	H. Nesemann, W. Brefeld, F. Brinker, W. Decking, O. Kaul, and B. Sarau, “DORIS III as a Dedicated Source for Synchrotron Radiation”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAA02, pp. 195-197. 
[n]	J. S. Chai et al., “Operation Experiences of MC50 Cyclotron, KIRAMS”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper MOP10006, pp. XX-XX. 
[n]	W. Schnell, “Report on the ISR”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1358-1363. 
[n]	K. Kranz, K. Desch, D. Elsner, and M. T. Switka, “Studies for a Laser Wakefield Driven Injector at ELSA”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2686-2688. doi:10.18429/JACoW-IPAC2022-THPOPT042
[n]	L. Calabretta, A. Calanna, D. Campo, M. M. Maggiore, L. A. C. Piazza, and F. Meot, “A Superconducting Ring Cyclotron for the DAEALUS Experiment”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPD026, pp. 421-423. 
[n]	S. A. Nikitin et al., “Development of Resonance Depolarization Method at VEPP-4 for High Precision Measurement of Tau Lepton Mass”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH041, pp. 3317-3319. 
[n]	N. R. Stevenson and W. Z. Gelbart, “External High Current Targetry for Radioisotope Production”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper IV-11, pp. 196-197. 
[n]	A. Akiyama et al., “KEKB Control System: The Present and the Future”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WECL3, pp. 343-345. 
[n]	K. Fukami et al., “Resonance Frequency Feedback System for a Precise Magnet Alignment using Multi-vibrating Wires”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 277-279. doi:10.18429/JACoW-IPAC2014-MOPRO081
[n]	J. Allinger, G. Danby, J. Jackson, and A. Prodell, “Ultra Stable High Field Superconducting Dipoles”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1323-1325. 
[n]	A. Ponton et al., “ESS Normal Conducting Linac Status and Plans”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper THPP044, pp. 948-950. 
[n]	K. Seiya et al., “Estimation of the required current on the anode power supply for high power operation in the J-PARC Main Ring”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper WEPS132, unpublished. 
[n]	J. M. Koch, E. Plouviez, and F. Uberto, “A Fast Global Feedback System to Correct the Beam Position Deviation in the ESRF Storage Ring”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP26G, pp. 1729-1731. 
[n]	D. Raparia, M. Okamura, T. Kanesue, K. Ishibashi, and Y. Yonemura, “Design Study of a DPIS Injector for a Heavy Ion FFAG”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper MOP045, pp. 172-174. 
[n]	M. Pont et al., “Power Converters for ALBA Booster”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPD067, pp. 3254-3256. 
[n]	D. Paulic et al., “Challenges for personnel safety systems during commissioning of ESS normal conducting linac”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4063-4066. doi:10.18429/JACoW-IPAC2023-THPA048
[n]	W. Busse and C. Rethfeldt, “The ISL-Control-System Upgrade: A Move from an In-House Implementation to a Commercial Control-System”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper TU213, pp. XX-XX. 
[n]	G. Shvets, N. J. Fisch, A. Pukhov, and J. Meyer-ter-Vehn, “Generation of Phase-Controlled Accelerating Structures in Plasma”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA126, pp. 3675-3677. 
[n]	K. H. Yoo, M. Chung, and H. J. Son, “Studies of Buffer Gas Cooling of Ion Beams in an RFQ Cooler and Their Transport to the EBIS Charge Breeder”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 248-250. doi:10.18429/JACoW-IPAC2016-MOPMR012
[n]	R. Miracoli et al., “A Microwave Ion Source for Pulsed Proton Beam Production at ESS-Bilbao”, in Proc. ECRIS'14, Nizhny Novgorod, Russia, Aug. 2014, paper MOPPH018, pp. 75-78. 
[n]	M. G. Mazarakis, L. F. Bennett, W. R. Olson, J. W. Poukey, D. L. Smith, and B. N. Turman, “Electron Diodes and Cavity Design for the New 4-MeV Injector of the Recirculating Linear Accelerator (RLA)”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TH409, pp. 605-607. 
[n]	H. O. C. Duarte, S. R. Marques, and L. Sanfelici, “Design and Impedance Optimization of the SIRIUS BPM Button”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper TUPC07, pp. 365-368. 
[n]	J. L. Munoz, I. Bustinduy, I. Rueda, and D. de Cos, “Design and Fabrication of ESS-Bilbao RFQ Linac”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2373-2375. doi:10.18429/JACoW-IPAC2017-TUPVA120
[n]	R. K. Rajawat, S. V. Desai, M. R. Kulkarni, D. Rani, K. V. Nagesh, and R. C. Sethi, “Electromagnetic Forming - A Technique with Potential Applications in Accelerators”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper MOP99906, pp. XX-XX. 
[n]	M. J. Johnson et al., “Cryomodule Design for a Superconducting Linac with Quarter-Wave, Half-Wave, and Focusing Elements”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPT096, pp. 4317-4319. 
[n]	S. S. Cha, Y. Kim, B. C. Lee, B. N. Lee, H. D. Park, and K. B. Song, “Advanced Automatic Frequency Control System for a Dual Energy S-band RF Electron Linear Accelerator”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2459-2461. doi:10.18429/JACoW-IPAC2014-WEPME077
[n]	C. M. Lyneis, “Status of ECR Source Technology”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 254-259. 
[n]	M. Liu and C. X. Yin, “Development of Compact Ionization Chambers for Particle Therapy Facilities”, in Proc. IBIC'19, Malmö, Sweden, Sep. 2019, pp. 100-102. doi:10.18429/JACoW-IBIC2019-MOPP012
[n]	L. G. Lewis, “The Structure and Use of a Computer Control System”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 338-340. 
[n]	D. Schirmer et al., “Status of the Synchrotron Light Source DELTA”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPKF017, pp. 2296-2298. 
[n]	A. Lumpkin, B. Yang, Y. Chung, R. Dejus, G. Voykov, and G. Dattoli, “Preliminary Calculations on the Determination of APS Particle-Beam Parameters Based on Undulator Radiation”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPC03, pp. 2598-2600. 
[n]	S. A. Gavrilov and A. Feschenko, “Design and Development of Bunch Shape Monitor for FRIB MSU”, in Proc. IBIC'17, Grand Rapids, MI, USA, Aug. 2017, pp. 179-181. doi:10.18429/JACoW-IBIC2017-TUPCC13
[n]	A. V. Edwards et al., “Connection of 12 GHz High Power RF from the XBOX 1 High Gradient Test Stand to the CLEAR Electron LINAC”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2960-2963. doi:10.18429/JACoW-IPAC2019-WEPRB063
[n]	M. I. Radaideh et al., “Progress on Machine Learning for the SNS High Voltage Converter Modulators”, in Proc. NAPAC'22, Albuquerque, NM, USA, Aug. 2022, pp. 715-718. doi:10.18429/JACoW-NAPAC2022-WEPA38
[n]	J. Bigolas, S. Getka, S. Kulinski, J. Olszewski, M. Pachan, and E. Plawski, “Practical Solution of High Gradient Accelerating Structure for Low Energy Medical Linear Accelerator”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP1A18, pp. 2518-2520. 
[n]	R. F. Koontz and R. H. Miller, “Nanosecond Electron Beam Generation and Instrumentation at SLAC”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1350-1354. 
[n]	M. Filtz and H. Henke, “Time Domain Radiation of a Gaussian Charge Sheet Passing a Slit in a Conducting Screen”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPCH111, pp. 2173-2175. 
[n]	Y. S. Qiao, G. Lei, and Z. Zhao, “The Study of Accelerator Data Archiving and Retrieving Software”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4007-4009. doi:10.18429/JACoW-IPAC2017-THPAB121
[n]	R. M. Caliari, L. M. P. Rodrigues, C. H. Tho, and H. G. P. de Oliveira, “Multipurpose Vacuum Chamber - Automation, Interlock-System and Self-Operating Vacuum Routines”, in Proc. PCaPAC'16, Campinas, Brazil, Oct. 2016, pp. 41-44. doi:10.18429/JACoW-PCAPAC2016-WEPOPRPO20
[n]	F. G. G. Garcia and W. Pellico, “Current and Planned High Proton Flux Operations at the FNAL Booster”, in Proc. HB'12, Beijing, China, Sep. 2012, paper WEO3A04, pp. 378-380. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search