Warning
Please note that we have recently received feedback indicated that atleast one of these reference may have a problem.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] Y. A. Cheng, A. Kurup, A. P. Letchford, J. K. Pozimski, and P. Savage, “RFQ Cold Model RF Measurements and Waveguide-to-Coaxial line Transition Design for the Front-End Test Stand at RAL”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAS002, pp. 1655-1657.
[n] K. M. Wilson et al., “The Prototype Fundamental Power Coupler for the Spallation Neutron Source Superconducting Cavities: Design and Initial Test Results”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper PT021, pp. 535-539.
[n] A. A. Arzumanov, “TECHNIQUE FOR IRRADIATION OF NB-GA TARGETS AT KAZAKHSTAN ISOCHRONOUS CYCLOTRON”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 19P06, pp. XX-XX.
[n] P. Savage, Y. A. Cheng, A. P. Letchford, and J. K. Pozimski, “Mechanical Design and RF Measurement on RFQ for Front-end Test Stand at RAL”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH117, pp. 318-320.
[n] R. K. Reece et al., “First Results of Proton Injection Commissioning of the AGS Booster Synchrotron”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 839-842.
[n] O. Turgut, J. M. Cesaratto, J. E. Dusatko, J. D. Fox, K. M. Pollock, and C. H. Rivetta, “Identification of Intra-Bunch Dynamics Using CERN SPS Machine Measurements”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper TUPAC25, pp. 502-504.
[n] F. R. Huson, “A 120-GeV Superbooster for Fermilab”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2046-2049.
[n] B. Buonomo, D. G. C. Di Giulio, L. G. Foggetta, and P. Valente, “The Frascati LINAC Beam-Test Facility (BTF) Performance and Upgrades”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 395-398. doi:10.18429/JACoW-IBIC2016-TUPG29
[n] R. J. Anderson et al., “Report on Helios: Routine Operation”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 187-192.
[n] C. Wermelskirchen et al., “The SSRL Injector Control System”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1383-1386.
[n] E. A. Knapp, “Accelerating Structure Research at Los Alamos”, in Proc. LINAC'63, New Heaven, CT, USA, Oct. 1963, paper 4-02, pp. 131-152.
[n] J. H. B. Madsen et al., “First Experience with the LEP Pre-Injector (LPI) by the LPI Beam Commissioning Team”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 298-301.
[n] E. C. M. Rial and Z. Patel, “Impact of Electron Beam Heating on Insertion Devices at Diamond Light Source”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1588-1591. doi:10.18429/JACoW-IPAC2017-TUPAB115
[n] C. Hovjat, K. G. Meisner, S. Ohnuma, and A. G. Ruggiero, “Deceleration of Antiprotons in the Fermilab Booster”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3586-3589.
[n] J. Sebek et al., “Diagnostic Instrumentation for the SSRL 3 GeV Injector”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1243-1246.
[n] N. Hauser et al., “Common Data Model ; A Unified Layer to Access Data from Data Analysis Point of View”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper THCHAUST03, pp. 1220-1223.
[n] M. B. Andorf, V. A. Lebedev, P. Piot, and J. Ruan, “Optically Based Diagnostics for Optical Stochastic Cooling”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 779-781. doi:10.18429/JACoW-NAPAC2016-WEPOA38
[n] A. Brinkmann, M. Lengkeit, and J. A. Lorkiewicz, “TiN Coating of RF Power Components for the European XFEL”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper THPPO037, pp. 652-655.
[n] N. Steinhau-K??hl, L. Lilje, A. Matheisen, B. Petersen, M. Schm?Âkel, and H. Weitk?ñmper, “Update on the Experiences of Electro Polishing of Multi-Cell Resonators at DESY”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper THP05, pp. 464-466.
[n] C. F. Kellers and R. M. Littauer, “A Megawatt Solid-State Inverter to Power the Cornell 10 - GeV Electron Synchrotron”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 496-500.
[n] A. Arnold, H. Buettig, D. Janssen, G. Staats, and J. Teichert, “Field reconstruction by passband frequency measurement at the Rossendorf SRF-gun cavity”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper WEP77, pp. XX-XX.
[n] F. Glotin, J.-M. Berset, R. Chaput, D. Jaroszynski, J.-M. Ortega, and R. Prazeres, “Short Pulse Generation with the CLIO FEL”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 846-849.
[n] W. S. Graves et al., “Measured Properties of the DUVFEL High Brightness, Ultrashort Electron Beam”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPAH008, pp. 2860-2862.
[n] L. M. Volpe, G. V. Claudiano, R. R. Geraldes, S. A. L. Luiz, and A. C. Pinto, “Optimization Method Using Thermal and Mechanical Simulations for Sirius High-Stability Mirrors”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 273-276. doi:10.18429/JACoW-MEDSI2018-WEPH31
[n] X. J. Wang et al., “S-band High Duty Photo-injection System”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPRI069, pp. 1822-1824.
[n] P. Kramer, H. L. Hagedoorn, and N. F. Verster, “The Central Region of the Philips AVF Cyclotron”, in Proc. Cyclotrons'63, Geneva, Switzerland, Apr. 1963, paper CYC63E07, pp. XX-XX.
[n] W. Shields, S. T. Boogert, L. J. Nevay, and J. Snuverink, “Hadron Therapy Machine Simulations Using BDSIM”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 546-549. doi:10.18429/JACoW-IPAC2018-MOPML061
[n] S. Schreiber, Ch. Gerth, K. Honkavaara, and P. Piot, “Electron Bunch Shape Measurements at the TTF-FEL”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPB040, pp. 911-913.
[n] D. C. Williams, J. P. Schubert, and J. Y. Tang, “The SNS Resonance Control Cooling System Control Valve Upgrade Performance”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP110, pp. 814-816.
[n] M. Won et al., “The Installation of the 28GHz Superconducting ECR Ion Source At KBSI”, in Proc. ECRIS'14, Nizhny Novgorod, Russia, Aug. 2014, paper WEOMMH01, pp. 104-106.
[n] R. D. Kephart et al., “SRF, Compact Accelerators for Industry & Society”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper FRBA03, pp. 1467-1473.
[n] M. Billing, N. Mistry, L. Phillips, and D. Thomas, “Some Aspects of the Vacuum System for the Proposed Storage Ring CESR”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1370-1373.
[n] P. Burrows et al., “Performance of the FONT3 Fast Analogue Intra-train Beam-based Feedback System at ATF”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPLS123, pp. 852-854.
[n] J. W. Storey et al., “Development of an Ionization Profile Monitor Based on a Pixel Detector for the CERN Proton Synchrotron”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 470-473. doi:10.18429/JACoW-IBIC2015-TUPB059
[n] T. Lamy, J. Angot, C. Fourel, and T. Thuillier, “New Configuration and Results with the LPSC Charge Breeder”, in Proc. ECRIS'08, Chicago, IL, USA, Sep. 2008, paper WECO-A01, pp. 180-182.
[n] J. L. Belmont, G. Bizouard, and F. Ripouteau, “Design of Injection, Extraction and Magnetic Fields in SARA”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper EP-04, pp. 383-385.
[n] N. Tsoupas et al., “Injection Acceleration and Extraction of High Intensity Proton Beam for the "Neutrino Facility" Project at BNL”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPB006, pp. 1637-1639.
[n] L. W. Oleksiuk, R. A. Andrews, E. J. Bleser, and C. H. Rode, “The NAL Beam Splitting System”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 428-434.
[n] M. M. Musardo et al., “3D Hall Probe Calibration System at Insertion Device Magnetic Measurement Facility at BNL”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper THPAC14, pp. 1169-1171.
[n] F. Lucas Rodriguez, I. Atanassov, P. Palazzi, and F. Ravotti, “The TOTEM Detector Control System”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP049, pp. 197-199.
[n] M. S. Cervantes et al., “A NEW PRODUCTION PROCESS FOR UCx TARGETS FOR RADIOACTIVE ISOTOPE BEAMS AT TRIUMF”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4990-4991. doi:10.18429/JACoW-IPAC2018-THPML131
[n] J. Badier et al., “The commissioning of the LEP Polarimeter”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1213-1216.
[n] I. H. Kohler et al., “Progress in the Conversion of the In-house Developed Control System to EPICS and related technologies at iThemba LABS”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPMS013, pp. 347-350.
[n] K. Gubin et al., “High Power Neutron Converter for Low Energy Proton/Deuteron Beams: Present Status”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper TUPMA122, pp. 274-276.
[n] R. Risler et al., “Clinical Cyclotron Seattle: Eleven Years of Operation”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper J-09, pp. 519-522.
[n] R. D?â, “Bunch Shape Measurements at Injector 2 and Ring Cyclotron”, in Proc. HB'10, Morschach, Switzerland, Sep.-Oct. 2010, paper MOPD62, pp. 235-239.
[n] S. Neff et al., “Heavy Ion Beam Transport in Plasma Channels”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT021, pp. 1183-1185.
[n] L. Celona et al., “Characterization of the Versatile Ion Source (VIS) for the Production of Monocharged Light Ion Beams”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper TUPPT014, pp. 183-185.
[n] A. Bungau, C. Bungau, R. Cywinski, P. J. C. King, and J. S. Lord, “Geometry Optimization of the ISIS Muon Target”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEA076, pp. 250-252.
[n] L. E. Medina Medrano, J. Barranco, T. Pieloni, X. Buffat, and R. Tomas, “Assessment of Linear and Non-Linear Optics Errors due to Beam-Beam with Multipoles for the High Luminosity LHC”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3557-3560. doi:10.18429/JACoW-IPAC2018-THPAK135
[n] M. Sullivan et al., “Results from a Prototype Permanent Magnet Dipole-Quadrupole Hybrid for the PEP-II B-Factory”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7P043, pp. 3330-3332.
[n] G. Ciavola et al., “Recent Developments of the EXCYT Project”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEP145, pp. 2578-2580.
[n] J. Ruan, M. D. Church, and J. K. Santucci, “Design and Commission of the Driven Laser System for Advanced Superconducting Test Accelerator”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper MOPD56, pp. 169-172.
[n] M. Panniello, P. Finocchiaro, S. Mallows, A. Pappalardo, and C. P. Welsch, “Characterization of Detectors for Beam Loss Measurements”, in Proc. BIW'12, Newport News, VA, USA, Apr. 2012, paper MOPG006, pp. 32-34.
[n] A. M. Baldin et al., “Present-Day Status of the Synchrophasotron as a Nuclear Accelerator”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2043-2046.
[n] R. A. Kostin et al., “Operation Regime Analysis of Conduction Cooled Cavities Through Multi-Physics Simulation”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2697-2699. doi:10.18429/JACoW-IPAC2018-WEPML010
[n] T. K. Kroc, C. W. Schmidt, and A. V. Shemyakin, “Magnetic Shielding of an Electron Beamline in a Hadron Accelerator Enclosure”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAE027, pp. 1997-1999.
[n] K. Akai et al., “A Prototype Module of Superconducting Damped Cavity for KEKB”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP051L, pp. 2121-2123.
For LaTeX
Use Complete Form
For BibTeX
References
- Y. A. Cheng, A. Kurup, A. P. Letchford, J. K. Pozimski, and P. Savage, “RFQ Cold Model RF Measurements and Waveguide-to-Coaxial line Transition Design for the Front-End Test Stand at RAL”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPAS002, pp. 1655-1657.
- K. M. Wilson et al., “The Prototype Fundamental Power Coupler for the Spallation Neutron Source Superconducting Cavities: Design and Initial Test Results”, in Proc. 10th Workshop RF Superconductivity (SRF'01), Tsukuba, Japan, Sep. 2001, paper PT021, pp. 535-539.
- A. A. Arzumanov, “TECHNIQUE FOR IRRADIATION OF NB-GA TARGETS AT KAZAKHSTAN ISOCHRONOUS CYCLOTRON”, in Proc. 17th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'04), Tokyo, Japan, Oct. 2004, paper 19P06, pp. XX-XX.
- P. Savage, Y. A. Cheng, A. P. Letchford, and J. K. Pozimski, “Mechanical Design and RF Measurement on RFQ for Front-end Test Stand at RAL”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPCH117, pp. 318-320.
- R. K. Reece et al., “First Results of Proton Injection Commissioning of the AGS Booster Synchrotron”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 839-842.
- O. Turgut, J. M. Cesaratto, J. E. Dusatko, J. D. Fox, K. M. Pollock, and C. H. Rivetta, “Identification of Intra-Bunch Dynamics Using CERN SPS Machine Measurements”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper TUPAC25, pp. 502-504.
- F. R. Huson, “A 120-GeV Superbooster for Fermilab”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2046-2049.
- B. Buonomo, D. G. C. Di Giulio, L. G. Foggetta, and P. Valente, “The Frascati LINAC Beam-Test Facility (BTF) Performance and Upgrades”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 395-398.
- R. J. Anderson et al., “Report on Helios: Routine Operation”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 187-192.
- C. Wermelskirchen et al., “The SSRL Injector Control System”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1383-1386.
- E. A. Knapp, “Accelerating Structure Research at Los Alamos”, in Proc. 1963 Conf. on Proton Linear Accelerators (LINAC'63), New Heaven, CT, USA, Oct. 1963, paper 4-02, pp. 131-152.
- J. H. B. Madsen et al., “First Experience with the LEP Pre-Injector (LPI) by the LPI Beam Commissioning Team”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 298-301.
- E. C. M. Rial and Z. Patel, “Impact of Electron Beam Heating on Insertion Devices at Diamond Light Source”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1588-1591.
- C. Hovjat, K. G. Meisner, S. Ohnuma, and A. G. Ruggiero, “Deceleration of Antiprotons in the Fermilab Booster”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3586-3589.
- J. Sebek et al., “Diagnostic Instrumentation for the SSRL 3 GeV Injector”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1243-1246.
- N. Hauser et al., “Common Data Model ; A Unified Layer to Access Data from Data Analysis Point of View”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper THCHAUST03, pp. 1220-1223.
- M. B. Andorf, V. A. Lebedev, P. Piot, and J. Ruan, “Optically Based Diagnostics for Optical Stochastic Cooling”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 779-781.
- A. Brinkmann, M. Lengkeit, and J. A. Lorkiewicz, “TiN Coating of RF Power Components for the European XFEL”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper THPPO037, pp. 652-655.
- N. Steinhau-K??hl, L. Lilje, A. Matheisen, B. Petersen, M. Schm?Âkel, and H. Weitk?ñmper, “Update on the Experiences of Electro Polishing of Multi-Cell Resonators at DESY”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper THP05, pp. 464-466.
- C. F. Kellers and R. M. Littauer, “A Megawatt Solid-State Inverter to Power the Cornell 10 - GeV Electron Synchrotron”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 496-500.
- A. Arnold, H. Buettig, D. Janssen, G. Staats, and J. Teichert, “Field reconstruction by passband frequency measurement at the Rossendorf SRF-gun cavity”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper WEP77, pp. XX-XX.
- F. Glotin, J.-M. Berset, R. Chaput, D. Jaroszynski, J.-M. Ortega, and R. Prazeres, “Short Pulse Generation with the CLIO FEL”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 846-849.
- W. S. Graves et al., “Measured Properties of the DUVFEL High Brightness, Ultrashort Electron Beam”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPAH008, pp. 2860-2862.
- L. M. Volpe, G. V. Claudiano, R. R. Geraldes, S. A. L. Luiz, and A. C. Pinto, “Optimization Method Using Thermal and Mechanical Simulations for Sirius High-Stability Mirrors”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 273-276.
- X. J. Wang et al., “S-band High Duty Photo-injection System”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPRI069, pp. 1822-1824.
- P. Kramer, H. L. Hagedoorn, and N. F. Verster, “The Central Region of the Philips AVF Cyclotron”, in Proc. Int. Conf. on Sector-Focused Cyclotrons and Meson Factories (Cyclotrons'63), Geneva, Switzerland, Apr. 1963, paper CYC63E07, pp. XX-XX.
- W. Shields, S. T. Boogert, L. J. Nevay, and J. Snuverink, “Hadron Therapy Machine Simulations Using BDSIM”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 546-549.
- S. Schreiber, Ch. Gerth, K. Honkavaara, and P. Piot, “Electron Bunch Shape Measurements at the TTF-FEL”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper MPPB040, pp. 911-913.
- D. C. Williams, J. P. Schubert, and J. Y. Tang, “The SNS Resonance Control Cooling System Control Valve Upgrade Performance”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPP110, pp. 814-816.
- M. Won et al., “The Installation of the 28GHz Superconducting ECR Ion Source At KBSI”, in Proc. 21st Int. Workshop on ECR Ion Sources (ECRIS'14), Nizhny Novgorod, Russia, Aug. 2014, paper WEOMMH01, pp. 104-106.
- R. D. Kephart et al., “SRF, Compact Accelerators for Industry & Society”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper FRBA03, pp. 1467-1473.
- M. Billing, N. Mistry, L. Phillips, and D. Thomas, “Some Aspects of the Vacuum System for the Proposed Storage Ring CESR”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1370-1373.
- P. Burrows et al., “Performance of the FONT3 Fast Analogue Intra-train Beam-based Feedback System at ATF”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPLS123, pp. 852-854.
- J. W. Storey et al., “Development of an Ionization Profile Monitor Based on a Pixel Detector for the CERN Proton Synchrotron”, in Proc. 4th Int. Beam Instrumentation Conf. (IBIC'15), Melbourne, Australia, Sep. 2015, pp. 470-473.
- T. Lamy, J. Angot, C. Fourel, and T. Thuillier, “New Configuration and Results with the LPSC Charge Breeder”, in Proc. 18th Int. Workshop on ECR Ion Sources (ECRIS'08), Chicago, IL, USA, Sep. 2008, paper WECO-A01, pp. 180-182.
- J. L. Belmont, G. Bizouard, and F. Ripouteau, “Design of Injection, Extraction and Magnetic Fields in SARA”, in Proc. 9th Int. Cyclotron Conf. and Their Applications (Cyclotrons'81), Caen, France, Sep. 1981, paper EP-04, pp. 383-385.
- N. Tsoupas et al., “Injection Acceleration and Extraction of High Intensity Proton Beam for the "Neutrino Facility" Project at BNL”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPPB006, pp. 1637-1639.
- L. W. Oleksiuk, R. A. Andrews, E. J. Bleser, and C. H. Rode, “The NAL Beam Splitting System”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 428-434.
- M. M. Musardo et al., “3D Hall Probe Calibration System at Insertion Device Magnetic Measurement Facility at BNL”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper THPAC14, pp. 1169-1171.
- F. Lucas Rodriguez, I. Atanassov, P. Palazzi, and F. Ravotti, “The TOTEM Detector Control System”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper TUP049, pp. 197-199.
- M. S. Cervantes et al., “A NEW PRODUCTION PROCESS FOR UCx TARGETS FOR RADIOACTIVE ISOTOPE BEAMS AT TRIUMF”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4990-4991.
- J. Badier et al., “The commissioning of the LEP Polarimeter”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1213-1216.
- I. H. Kohler et al., “Progress in the Conversion of the In-house Developed Control System to EPICS and related technologies at iThemba LABS”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPMS013, pp. 347-350.
- K. Gubin et al., “High Power Neutron Converter for Low Energy Proton/Deuteron Beams: Present Status”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper TUPMA122, pp. 274-276.
- R. Risler et al., “Clinical Cyclotron Seattle: Eleven Years of Operation”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper J-09, pp. 519-522.
- R. D?â, “Bunch Shape Measurements at Injector 2 and Ring Cyclotron”, in Proc. 46th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'10), Morschach, Switzerland, Sep.-Oct. 2010, paper MOPD62, pp. 235-239.
- S. Neff et al., “Heavy Ion Beam Transport in Plasma Channels”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPLT021, pp. 1183-1185.
- L. Celona et al., “Characterization of the Versatile Ion Source (VIS) for the Production of Monocharged Light Ion Beams”, in Proc. 20th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'13), Vancouver, Canada, Sep. 2013, paper TUPPT014, pp. 183-185.
- A. Bungau, C. Bungau, R. Cywinski, P. J. C. King, and J. S. Lord, “Geometry Optimization of the ISIS Muon Target”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEA076, pp. 250-252.
- L. E. Medina Medrano, J. Barranco, T. Pieloni, X. Buffat, and R. Tomas, “Assessment of Linear and Non-Linear Optics Errors due to Beam-Beam with Multipoles for the High Luminosity LHC”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3557-3560.
- M. Sullivan et al., “Results from a Prototype Permanent Magnet Dipole-Quadrupole Hybrid for the PEP-II B-Factory”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 7P043, pp. 3330-3332.
- G. Ciavola et al., “Recent Developments of the EXCYT Project”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEP145, pp. 2578-2580.
- J. Ruan, M. D. Church, and J. K. Santucci, “Design and Commission of the Driven Laser System for Advanced Superconducting Test Accelerator”, in Proc. 34th Int. Free Electron Laser Conf. (FEL'12), Nara, Japan, Aug. 2012, paper MOPD56, pp. 169-172.
- M. Panniello, P. Finocchiaro, S. Mallows, A. Pappalardo, and C. P. Welsch, “Characterization of Detectors for Beam Loss Measurements”, in Proc. 15th Beam Instrumentation Workshop (BIW'12), Newport News, VA, USA, Apr. 2012, paper MOPG006, pp. 32-34.
- A. M. Baldin et al., “Present-Day Status of the Synchrophasotron as a Nuclear Accelerator”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2043-2046.
- R. A. Kostin et al., “Operation Regime Analysis of Conduction Cooled Cavities Through Multi-Physics Simulation”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2697-2699.
- T. K. Kroc, C. W. Schmidt, and A. V. Shemyakin, “Magnetic Shielding of an Electron Beamline in a Hadron Accelerator Enclosure”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAE027, pp. 1997-1999.
- K. Akai et al., “A Prototype Module of Superconducting Damped Cavity for KEKB”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP051L, pp. 2121-2123.
Back to search