Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] G. S. Pomogaybo, M. V. Lalayan, and S. E. Toporkov, “Development of the Hardware-Software Complex PIRS-5 for Field Measurements in Accelerating Structures”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 702-704. doi:10.18429/JACoW-RUPAC2016-THPSC073
[n] V. R. Kozak and O. V. Belikov, “Controller of Power Supplies for Corrector Magnets of European XFEL”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 715-717. doi:10.18429/JACoW-RUPAC2016-THPSC078
[n] M. C. Crowley-Milling, “The Control System for LEP”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2142-2147.
[n] K. T. Hsu et al., “Design Status of the TPS Control System”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEB018, pp. 2725-2727.
[n] L. Tosi, E. Karantzoulis, and V. Smaluk, “Measurements and Simulations of the Damping Effect of the Harmonic Sextupole on Transverse Instabilities”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPRI026, pp. 1571-1573.
[n] R. Billinge and M. C. Crowley-Milling, “The Cern Proton-Antiproton Colliding Beam Facilities”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 2974-2978.
[n] P. J. Giansiracusa, M. J. Boland, M. P. Lafky, T. G. Lucas, R. P. Rassool, and M. Volpi, “The Effect of the SLED Installation on Extracted and Lost Beam at the Australian Synchrotron Linac.”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2794-2797. doi:10.18429/JACoW-IPAC2019-WEPRB001
[n] L. Tosi, E. Karantzoulis, and V. Smaluk, “Measurements of the Impedance Introduced by the Vertical Scraper at ELETTRA and itsir Effects”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPRI027, pp. 1568-1570.
[n] M. Volpi et al., “High Power and High Repetition Rate X-band Power Source Using Multiple Klystrons”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4552-4555. doi:10.18429/JACoW-IPAC2018-THPMK104
[n] P. J. Giansiracusa, T. G. Lucas, R. P. Rassool, M. Volpi, M. J. Boland, and G. LeBlanc, “Applications of a Distributed Beam Loss Monitor at the Australian Synchrotron”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4986-4989. doi:10.18429/JACoW-IPAC2018-THPML130
[n] F. Di Maio, W. Heinze, and F. Perriollat, “Experience with the Use of Macintrotte" for Commissioning Process Equipment of the LEP Pre-Injector"”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 597-600.
[n] R. Ursic and R. De Monte, “Digital Receivers Offer New Solutions for Beam Instrumentation”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA172, pp. 2253-2255.
[n] M. C. Crowley-Milling, “Trends in Accelerator Control Systems”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper WEC0008, pp. 268-272.
[n] G. Karpov, V. Kiselev, V. Smaluk, and N. Zinvich Budker Institute of Nuclear Physics, “The fast head-tail instability suppression in multibunch mode at VEPP-4M”, in Proc. DIPAC'99, Chester, UK, May 1999, paper PS16, pp. XX-XX.
[n] S. Reiche, C. Pellegrini, J. B. Rosenzweig, P. Emma, and P. Krejcik, “Start-to-End Simulation for the LCLS Xray-FEL”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH119, pp. 2751-2753.
[n] T. G. Lucas et al., “Initial Testing of Techniques for Large Scale Rf Conditioning for the Compact Linear Collider”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4548-4551. doi:10.18429/JACoW-IPAC2018-THPMK103
[n] G. P. Averyanov, V. A. Budkin, and I. O. Osadchuk, “Design Relativistic Charged Particle Beam Transportation Channels”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 355-357. doi:10.18429/JACoW-RUPAC2016-WEPSB003
[n] M. K. Sullivan et al., “Anomalous High Radiation Beam Aborts in the PEP-II B-factory”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPLS049, pp. 652-654.
[n] B. Singh et al., “Active Shimming of Dynamic Multipoles of an APPLE II Undulator in the Diamond Storage Ring”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPWO057, pp. 1997-1999.
[n] F. Beck, M. C. Crowley-Milling, and G. Shering, “Operational Experience with the SPS Computer Control System”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1674-1677.
[n] F. Perriollat, R. Debordes, and A. Gagnaire, “The Main Operator Consoles of the PS Accelerator Complex”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2047-2050.
[n] A. Peters and M. Ferianis, “Beam Synchronous Timing Systems”, in Proc. DIPAC'03, Mainz, Germany, May 2003, paper DW03, pp. XX-XX.
[n] R. Ur?íic, “Present Status and Future Outlook of the Accelerator Industry in Europe”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEIRA04, pp. 2456-2460.
[n] R. Zennaro et al., “High Power Tests of a Prototype X-Band Accelerating Structure for CLIC”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4318-4320. doi:10.18429/JACoW-IPAC2017-THPIK097
[n] G. P. Averyanov, V. A. Budkin, A. V. Kobylyatskiy, and I. O. Osadchuk, “The Intelligent Object-oriented Interface in the Design Environment of The Charged Particles Relativistic Beams Transport Channels”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 358-360. doi:10.18429/JACoW-RUPAC2016-WEPSB004
[n] N. Catalan-Lasheras et al., “Commissioning of XBox-3: A Very High Capacity X-band Test Stand”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 568-571. doi:10.18429/JACoW-LINAC2016-TUPLR047
[n] S. A. Litvinov et al., “First Experimental Demonstration of the Extraction of Low Energy Beams from the ESR to the CRYRING@ESR”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 352-354. doi:10.18429/JACoW-RUPAC2016-WEPSB002
[n] K. H. Hu et al., “Analysis of the Post-mortem Events at the TLS”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper TUPD40, pp. 392-394.
[n] V. Schlott et al., “Performance of the Digital BPM System for the Swiss Light Source”, in Proc. DIPAC'01, Grenoble, France, May 2001, paper CT03, pp. XX-XX.
[n] A. Bland and S. T. Page, “Upgrades to the Infrastructure and Management of the Operator Workstations and Servers for Run 2 of the CERN Accelerator Complex”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 1158-1161. doi:10.18429/JACoW-ICALEPCS2015-THHD3O08
[n] M. Dehler et al., “New digital BPM system for the Swiss light source”, in Proc. DIPAC'99, Chester, UK, May 1999, paper PT06, pp. XX-XX.
[n] G. Di Pirro, A. Drago, and F. Sannibale, “DA$Phi $NE Beam Loss Monitor System”, in Proc. DIPAC'03, Mainz, Germany, May 2003, paper PT34, pp. XX-XX.
[n] M. C. Crowley-Milling and I. I. Rabinowitz, “Synchrotron-Betatron Oscillation Coupling in NINA”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 1052-1057.
[n] V. G. Ziemann et al., “Technical Aspects of the Integration of the Optical Replica Synthesizer for the Diagnostics of Ultra-short Bunches in FLASH at DESY”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH081, pp. 1199-1201.
[n] R. Assmann et al., “A Fast and Accurate Phasing Algorithm for the RF Accelerating Voltages of the SLAC Linac”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP11H, pp. 448-450.
[n] A. Vnuchenko et al., “High Gradient Performance of an S-Band Backward Traveling Wave Accelerating Structure for Medical Hadron Therapy Accelerators”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 491-494. doi:10.18429/JACoW-IPAC2018-MOPML043
[n] R. Ursic, K. Mahoney, C. Hovater, A. Hutton, and C. Sinclair, “CEBAF Beam Loss Accounting”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPC26, pp. 2652-2654.
[n] M. Boege, M. Dehler, T. Schilcher, V. Schlott, and R. Ursic, “Fast Closed Orbit Control in the SLS Storage Ring”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA26, pp. 1129-1131.
[n] M. C. Crowley-Milling, “Control Problems in Very Large Accelerators”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1874-1877.
For LaTeX
Use Complete Form
For BibTeX
References
- G. S. Pomogaybo, M. V. Lalayan, and S. E. Toporkov, “Development of the Hardware-Software Complex PIRS-5 for Field Measurements in Accelerating Structures”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 702-704.
- V. R. Kozak and O. V. Belikov, “Controller of Power Supplies for Corrector Magnets of European XFEL”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 715-717.
- M. C. Crowley-Milling, “The Control System for LEP”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2142-2147.
- K. T. Hsu et al., “Design Status of the TPS Control System”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEB018, pp. 2725-2727.
- L. Tosi, E. Karantzoulis, and V. Smaluk, “Measurements and Simulations of the Damping Effect of the Harmonic Sextupole on Transverse Instabilities”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPRI026, pp. 1571-1573.
- R. Billinge and M. C. Crowley-Milling, “The Cern Proton-Antiproton Colliding Beam Facilities”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 2974-2978.
- P. J. Giansiracusa, M. J. Boland, M. P. Lafky, T. G. Lucas, R. P. Rassool, and M. Volpi, “The Effect of the SLED Installation on Extracted and Lost Beam at the Australian Synchrotron Linac.”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2794-2797.
- L. Tosi, E. Karantzoulis, and V. Smaluk, “Measurements of the Impedance Introduced by the Vertical Scraper at ELETTRA and itsir Effects”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPRI027, pp. 1568-1570.
- M. Volpi et al., “High Power and High Repetition Rate X-band Power Source Using Multiple Klystrons”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4552-4555.
- P. J. Giansiracusa, T. G. Lucas, R. P. Rassool, M. Volpi, M. J. Boland, and G. LeBlanc, “Applications of a Distributed Beam Loss Monitor at the Australian Synchrotron”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4986-4989.
- F. Di Maio, W. Heinze, and F. Perriollat, “Experience with the Use of Macintrotte" for Commissioning Process Equipment of the LEP Pre-Injector"”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 597-600.
- R. Ursic and R. De Monte, “Digital Receivers Offer New Solutions for Beam Instrumentation”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEA172, pp. 2253-2255.
- M. C. Crowley-Milling, “Trends in Accelerator Control Systems”, in Proc. 1984 Linear Accelerator Conf. (LINAC'84), Seeheim, Germany, May 1984, paper WEC0008, pp. 268-272.
- G. Karpov, V. Kiselev, V. Smaluk, and N. Zinvich Budker Institute of Nuclear Physics, “The fast head-tail instability suppression in multibunch mode at VEPP-4M”, in Proc. 4th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'99), Chester, UK, May 1999, paper PS16, pp. XX-XX.
- S. Reiche, C. Pellegrini, J. B. Rosenzweig, P. Emma, and P. Krejcik, “Start-to-End Simulation for the LCLS Xray-FEL”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPPH119, pp. 2751-2753.
- T. G. Lucas et al., “Initial Testing of Techniques for Large Scale Rf Conditioning for the Compact Linear Collider”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4548-4551.
- G. P. Averyanov, V. A. Budkin, and I. O. Osadchuk, “Design Relativistic Charged Particle Beam Transportation Channels”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 355-357.
- M. K. Sullivan et al., “Anomalous High Radiation Beam Aborts in the PEP-II B-factory”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPLS049, pp. 652-654.
- B. Singh et al., “Active Shimming of Dynamic Multipoles of an APPLE II Undulator in the Diamond Storage Ring”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPWO057, pp. 1997-1999.
- F. Beck, M. C. Crowley-Milling, and G. Shering, “Operational Experience with the SPS Computer Control System”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1674-1677.
- F. Perriollat, R. Debordes, and A. Gagnaire, “The Main Operator Consoles of the PS Accelerator Complex”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2047-2050.
- A. Peters and M. Ferianis, “Beam Synchronous Timing Systems”, in Proc. 6th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'03), Mainz, Germany, May 2003, paper DW03, pp. XX-XX.
- R. Ur?íic, “Present Status and Future Outlook of the Accelerator Industry in Europe”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEIRA04, pp. 2456-2460.
- R. Zennaro et al., “High Power Tests of a Prototype X-Band Accelerating Structure for CLIC”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4318-4320.
- G. P. Averyanov, V. A. Budkin, A. V. Kobylyatskiy, and I. O. Osadchuk, “The Intelligent Object-oriented Interface in the Design Environment of The Charged Particles Relativistic Beams Transport Channels”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 358-360.
- N. Catalan-Lasheras et al., “Commissioning of XBox-3: A Very High Capacity X-band Test Stand”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 568-571.
- S. A. Litvinov et al., “First Experimental Demonstration of the Extraction of Low Energy Beams from the ESR to the CRYRING@ESR”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 352-354.
- K. H. Hu et al., “Analysis of the Post-mortem Events at the TLS”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper TUPD40, pp. 392-394.
- V. Schlott et al., “Performance of the Digital BPM System for the Swiss Light Source”, in Proc. 5th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'01), Grenoble, France, May 2001, paper CT03, pp. XX-XX.
- A. Bland and S. T. Page, “Upgrades to the Infrastructure and Management of the Operator Workstations and Servers for Run 2 of the CERN Accelerator Complex”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 1158-1161.
- M. Dehler et al., “New digital BPM system for the Swiss light source”, in Proc. 4th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'99), Chester, UK, May 1999, paper PT06, pp. XX-XX.
- G. Di Pirro, A. Drago, and F. Sannibale, “DA$Phi $NE Beam Loss Monitor System”, in Proc. 6th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'03), Mainz, Germany, May 2003, paper PT34, pp. XX-XX.
- M. C. Crowley-Milling and I. I. Rabinowitz, “Synchrotron-Betatron Oscillation Coupling in NINA”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 1052-1057.
- V. G. Ziemann et al., “Technical Aspects of the Integration of the Optical Replica Synthesizer for the Diagnostics of Ultra-short Bunches in FLASH at DESY”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPCH081, pp. 1199-1201.
- R. Assmann et al., “A Fast and Accurate Phasing Algorithm for the RF Accelerating Voltages of the SLAC Linac”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP11H, pp. 448-450.
- A. Vnuchenko et al., “High Gradient Performance of an S-Band Backward Traveling Wave Accelerating Structure for Medical Hadron Therapy Accelerators”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 491-494.
- R. Ursic, K. Mahoney, C. Hovater, A. Hutton, and C. Sinclair, “CEBAF Beam Loss Accounting”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TPC26, pp. 2652-2654.
- M. Boege, M. Dehler, T. Schilcher, V. Schlott, and R. Ursic, “Fast Closed Orbit Control in the SLS Storage Ring”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUA26, pp. 1129-1131.
- M. C. Crowley-Milling, “Control Problems in Very Large Accelerators”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 1874-1877.
Back to search