JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	Y. J. Lee, J. Griswold, S.-H. Kim, and S. Cousineau, “Radioisotope production at the Spallation Neutron Source: Design concept of isotope production target”, in Proc. NAPAC'25, Sacramento, California, USA, Aug. 2025, pp. 1097-1101. doi:10.18429/JACoW-NAPAC2025-THP066
[n]	T. Podzorny et al., “Data acquisition and supervision systems for the HL-LHC quench protection system - part I the hardware”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3992-3995. doi:10.18429/JACoW-IPAC2023-THPA023
[n]	C. Adolphsen, Z. Li, K. Ko, R. H. Miller, K. L. F. Bane, and V. Dolgashev, “Higher Dipole Bands in the NLC Accelerating Structure”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper TUA18, pp. 422-424. 
[n]	T. Xu et al., “Electron beam current spike formation for short pulse generation with two lasers”, presented at the NAPAC'25, Sacramento, California, USA, Aug. 2025, paper TUP047, unpublished. 
[n]	J. Griswold et al., “Radioisotope production at SNS (RIPS)”, in Proc. NAPAC'25, Sacramento, California, USA, Aug. 2025, pp. 1089-1093. doi:10.18429/JACoW-NAPAC2025-THP064
[n]	S. Sato, T. Furukawa, and K. Noda, “Development of Intensity Control System with RF-knockout Extraction at the HIMAC Synchrotron”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPCH170, pp. 2331-2333. 
[n]	M. Behtouei et al., “Studies of a Ka-Band High Power Klystron Amplifier at INFN-LNF”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 683-686. doi:10.18429/JACoW-IPAC2022-MOPOMS022
[n]	A. Jain et al., “Injection of collider-quality e-beams in plasma accelerators”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper MOPR60, unpublished. 
[n]	J. Hirschman et al., “Leveraging the capabilities of LCLS-II: linking adaptable photoinjector laser shaping to tailored X-ray production”, presented at the NAPAC'25, Sacramento, California, USA, Aug. 2025, paper THP049, unpublished. 
[n]	T.-J. Kuo et al., “Design of prototype magnet for FETS-FFA”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 464-466. doi:10.18429/JACoW-IPAC2024-MOPR05
[n]	I. Rodriguez, S. Lawrie, and J. Speed, “Design of an electrostatic chopper for the new ISIS MEBT”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2223-2226. doi:10.18429/JACoW-IPAC2023-TUPM016
[n]	T. Kosuge, P. Duval, H. Ishii, Y. Nagatani, H. Nitani, and J. Szczesny, “Development of ACOP .NET STARS Transport Layer”, in Proc. PCaPAC'18, Hsinchu City, Taiwan, Oct. 2018, pp. 144-147. doi:10.18429/JACoW-PCaPAC2018-THCB2
[n]	S. G. Arutunian, I. E. Vasiniuk, G. Decker, and G. S. Harutyunyan, “HEAT COUPLING IN MULTI-WIRE VIBRATING WIRE MONITOR”, in Proc. RuPAC'08, Zvenigorod, Russia, Sep.-Oct. 2008, paper WEBPH02, pp. XX-XX. 
[n]	I. Romera et al., “Design considerations for CERN´s second-generation Beam Interlock System”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4105-4108. doi:10.18429/JACoW-IPAC2023-THPA062
[n]	N. Majernik et al., “Rotor-based multileaf collimator for beam shaping”, presented at the NAPAC'25, Sacramento, California, USA, Aug. 2025, paper MOP085, unpublished. 
[n]	J. Hirschman et al., “Leveraging the capabilities of LCLS-II: linking adaptable photoinjector laser shaping to tailored X-ray production”, presented at the NAPAC'25, Sacramento, California, USA, Aug. 2025, paper SUP012, unpublished. 
[n]	Q. Qin et al., “Overview of ESRF-EBS's four-year operation and strategy for further upgrade”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 733-736. doi:10.18429/JACoW-IPAC2025-MOPS052
[n]	R. E. Laxdal, M. Marchetto, and A. Bylinskii, “Beam Dynamics Studies on the ISAC-II Superconducting Linac”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper TUP031, pp. 312-314. 
[n]	Y. J. Lee, I. Popova, J. Griswold, S.-H. Kim, S. Cousineau, and W. Willis, “Radioisotope production at the Spallation Neutron Source: Design concept of experimental target station”, in Proc. NAPAC'25, Sacramento, California, USA, Aug. 2025, pp. 1093-1097. doi:10.18429/JACoW-NAPAC2025-THP065
[n]	R. Robles and A. Marinelli, “Stability and scalability of superradiant amplification in attosecond X-ray free-electron lasers”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper MOPG63, unpublished. 
[n]	S. G. Tantawi and V. Dolgashev, “2D Simulation of High-Efficiency Cross-Field RF Power Sources”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper THA06, pp. 748-750. 
[n]	Y. Shi, X. Shi, and H. Xu, “Study on energy stability of high-charge bunches from laser plasma accelerators for ring injectors”, presented at the IPAC'26, Deauville, France, May 2026, paper THP3609, unpublished. 
[n]	R. Robles, Z. Huang, and A. Marinelli, “Revisiting Intrabeam Scattering for Laminar Beams”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2221-2224. doi:10.18429/JACoW-IPAC2022-WEPOTK065
[n]	E. L. Flannigan et al., “Space Charge Compensation Time Measurement for a Pulsed, High-Current H- Ion Beam”, presented at the IPAC'26, Deauville, France, May 2026, paper WEP6093, unpublished. 
[n]	A. Ghigo et al., “Plasma acceleration-induced betatron radiation: a potential seed for Free Electron Lasers”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1863-1865. doi:10.18429/JACoW-IPAC2023-TUPL049
[n]	Z. Li, J. W. Wang, R. H. Miller, G. B. Bowden, R. Loewen, and V. Dolgashev, “Microwave Quality Assurance for Single Cells of the Next Linear Collider”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper TUA20, pp. 425-427. 
[n]	R. Robles et al., “Single spike hard x-ray free-electron laser pulses generated by photocathode laser shaping”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper MOPB102, unpublished. 
[n]	J. S. Chai, J. H. Ha, H. Y. Lee, Y. S. Kim, S. Oh, and M. Yoon, “New Design and Development of 13 MeV PET Cyclotron in Korea”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THP80, pp. 3137-3139. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search