Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] D. P. Moehs et al., “Fermilab Booster Charge As A Function of Linac Intensity”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TU429, pp. 374-376.
[n] N. Mehrotra et al., “Design Study of Alternate Injector at Pelletron Accelerator Facility”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP034, pp. 3443-3445.
[n] Y. Mori et al., “A Preliminary Design of the PS Collider”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 165-168.
[n] E. Chiaveri, E. Haebel, E. Mahner, and J. M. Tessier, “The Quadrupole Resonator, Construction, RF System, Field Calculations and First Applications”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP041B, pp. 1852-1854.
[n] S. Tuma et al., “Integration of Beam Diagnostics Devices for a Therapy Accelerator”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3641-3643. doi:10.18429/JACoW-IPAC2014-THPME161
[n] S. He et al., “Mechanical Study of the First Superconducting Half-wave Resonator for Injector II of CADS Project”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper MOPB057, pp. 306-308.
[n] Y. B. Yan, Y. Z. Chen, Y. B. Leng, W. M. Zhou, and Y. Zou, “Data Acquisition and Analysis in SSRF BPM System”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC015, pp. 1077-1079.
[n] W. Bialowons, R. Amirikas, A. Bertolini, and D. Kruecker, “Measurement of Ground Motion in Various Sites”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPLS064, pp. 691-693.
[n] D. L. Bowring et al., “RF Breakdown of 805 MHz Cavities in Strong Magnetic Fields”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 53-56. doi:10.18429/JACoW-IPAC2015-MOAD2
[n] V. Aleynikov and A. Nikiforov, “QNX Based Software for Control System of FLNR”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P1_036.
[n] R. Krasse, R. Browne, and R. Fullwood, “Practical Operating Problems at the RPI Linac”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 449-457.
[n] Yu. Senichev, T. Korsbjerg, S. P. M, and E. Zaplatine, “Solving the Problem of Heating of RF Contacts in Cavity Tuners”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2P022, pp. 2923-2925.
[n] J.-M. Ortega, J. P. Berthet, F. Glotin, and R. Prazeres, “Study of the CLIO FEL in the Far-infrared in a Partially Guided Mode”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2859-2862. doi:10.18429/JACoW-IPAC2014-THPRO004
[n] J. Teichert et al., “A Superconducting Photo-Injector with 3+1/2- Cell Cavity for the ELBE Linac”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPKF015, pp. 333-335.
[n] L. Somaschini et al., “Tuner System Simulation and Tests for the 201-MHz MICE Cavity”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3927-3929. doi:10.18429/JACoW-IPAC2014-THPRI070
[n] F. Osmic et al., “Overview of the Beam Diagnostics in the MedAustron Accelerator: Design Choices and Test Beam Commissioning”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPR002, pp. 774-776.
[n] J. S. Eldred and R. M. Zwaska, “Proposed Cavity for Reduced Slip-Stacking Loss”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 600-603. doi:10.18429/JACoW-IPAC2015-MOPMA026
[n] M. Hostettler, K. Fuchsberger, and G. Papotti, “Operational Experience with Luminosity Scans for Beam Size Estimation in 2016 LHC Proton Physics Operation”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 374-376. doi:10.18429/JACoW-IPAC2017-MOPAB109
[n] T. Koeth, “SC Cavities at 3.9 GHz”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper TUA09, pp. 193-193.
[n] C. M. Lyneis, M. A. Leitner, D. Wutte, C. E. Taylor, and S. R. Abbott, “VENUS: The Next Generation ECR Ion Source”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper G-1, pp. XX-XX.
[n] N. Solyak, H. Edwards, I. Gonin, M. Foley, T. Khabiboulline, and D. Mitchell, “Development of the 3.9 GHz 3rd Harmonic Cavity at FNAL”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper TUP43, pp. 429-431.
[n] X. Zhang, W. W. Destler, M. Reiser, C. D. Striffler, and R. L. Yao, “Intense Electron Beam Propagation Across a Magnetic Field”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1035-1038.
[n] M. Gusarova, A. Krasnov, M. Lalayan, N. Sobenin, A. Zavadtsev, and D. Zavadtsev, “Input Coupler Development for Superconducting Cavity 500kW CW Power Feed”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper TUA15, pp. 215-217.
[n] M. Wenskat et al., “A Cross-Lab Qualification of Modified 120??C Baked Cavities”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 90-94. doi:10.18429/JACoW-SRF2019-MOP026
[n] D. Rajaram and P. Snopok, “Muon Ionization Cooling Experiment Step VI”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPFI066, pp. 1502-1504.
[n] Y. C. Liao, C. Y. Li, X. Liu, B. Qin, W. Wang, and R. X. Zhao, “CSPT: A GPU-Accelerated Lattice Design Toolkit Especially for CCT”, in Proc. Cyclotrons'22, Beijing, China, Dec. 2022, paper THPO004, pp. 299-302. doi:10.18429/JACoW-CYCLOTRONS2022-THPO004
[n] J. Brossard, M. Desmons, B. M. Mercier, C. P. Prevost, and R. Roux, “Construction of the Probe Beam Photo-injector of CTF3”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPLS114, pp. 828-830.
[n] N. Tsoupas, H. Enge, and E. Forest, “Calculation of Aberration Coefficients up to Sixth Order of Multipole Focusing Elements”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper WE3-52, pp. 442-444.
[n] R. P. Johnson et al., “Tunable RF Cavities Using Orthogonally Biased Ferrite”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP018, pp. 849-851.
[n] Z. Tang, A. Chen, and W. Chou, “A New Kind of Beam Pipe for Rapid Cycling Proton Synchrotrons”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper ROPB006, pp. 623-624.
[n] K. L. Mahoney, I. T. Carlino, K. Kindrew, T. L. Larrieu, T. S. McGuckin, and N. Okay, “Jefferson Lab Personnel Safety Electronic Log RMA”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP046, pp. 188-190.
[n] M. L. Mallory, J. B. Ball, D. Dowling, E. D. H. Hudson, R. S. L. Lord, and A. Tatum, “ORIC Beam Energy Increase”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FPAE032, pp. 2257-2259.
[n] S. Humphries, J. Petillo, and N. Dionne, “Modeling Secondary Emission in a Finite-Element Multipactor Code”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper WEP008, pp. 390-396.
[n] A. N. Ivanov and Y. Senichev, “Matrix Integration of ODEs for Spin-orbit Dynamics Simulation”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 400-402. doi:10.18429/JACoW-IPAC2014-MOPME011
[n] K. Blasche, D. Boehne, B. Franczak, B. Franzke, and C. Riedel, “SIS-A Two Stage Synchrotron Facility for Heavy Ions”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2013-2016.
[n] M. Walter et al., “Beam Extraction Concepts and Design for the University of Maryland Electron Ring (UMER)”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAS048, pp. 1754-1756.
[n] D. Calandroni and Y. Hiramoto, “A Simple Beam Chopper for TOF Experiments”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper D-24, pp. 317-319.
[n] A. Drozhdin, Y. Irie, N. Mokhov, N. Nakao, and M. Uota, “Beam Halo Collection for the JHF 3-GeV Synchrotron”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP23G, pp. 2315-2317.
[n] C. L. Li, A. M. Kiss, and W. J. Zhang, “Investigation of Continuous Scan Methods for Rapid Data Acquisition”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1243-1245. doi:10.18429/JACoW-IPAC2015-MOPWI036
[n] R. Tighe, “RF Feedback Simulation for the PEP-II B Facotry”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1957-1960.
[n] J. McCarrick, Y.-J. Chen, T. L. Houck, and B. R. Poole, “Trapping Backstreaming Ions from an X-ray Converter Using an Inductive Cell”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TH4028, pp. 833-835.
[n] L. Zeng et al., “The Beam-Based Alignment Simulation and Preliminary Experiment at SXFEL”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1804-1807. doi:10.18429/JACoW-IPAC2019-TUPRB054
[n] K. H. Chung, B. H. Choi, J. H. Hong, and S. K. Ko, “Development of Pellet Chain for Charge Carrying”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1021-1024.
[n] G. Andonian, P. Frigola, S. Reiche, J. B. Rosenzweig, S. Telfer, and G. Travish, “Status of the UCLA PEGASUS Laboratory”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAB030, pp. 2110-2111.
[n] T. J. Smith, J. C. Frisch, E. M. Kraft, J. Loos, and G. S. Bentsen, “Thermal Acoustic Sensor for High Pulse Energy X-ray FEL Beams”, in Proc. FEL'11, Shanghai, China, Aug. 2011, paper WEPA02, pp. 334-336.
For LaTeX
Use Complete Form
For BibTeX
References
- D. P. Moehs et al., “Fermilab Booster Charge As A Function of Linac Intensity”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper TU429, pp. 374-376.
- N. Mehrotra et al., “Design Study of Alternate Injector at Pelletron Accelerator Facility”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPP034, pp. 3443-3445.
- Y. Mori et al., “A Preliminary Design of the PS Collider”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 165-168.
- E. Chiaveri, E. Haebel, E. Mahner, and J. M. Tessier, “The Quadrupole Resonator, Construction, RF System, Field Calculations and First Applications”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP041B, pp. 1852-1854.
- S. Tuma et al., “Integration of Beam Diagnostics Devices for a Therapy Accelerator”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3641-3643.
- S. He et al., “Mechanical Study of the First Superconducting Half-wave Resonator for Injector II of CADS Project”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper MOPB057, pp. 306-308.
- Y. B. Yan, Y. Z. Chen, Y. B. Leng, W. M. Zhou, and Y. Zou, “Data Acquisition and Analysis in SSRF BPM System”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPC015, pp. 1077-1079.
- W. Bialowons, R. Amirikas, A. Bertolini, and D. Kruecker, “Measurement of Ground Motion in Various Sites”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPLS064, pp. 691-693.
- D. L. Bowring et al., “RF Breakdown of 805 MHz Cavities in Strong Magnetic Fields”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 53-56.
- V. Aleynikov and A. Nikiforov, “QNX Based Software for Control System of FLNR”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper P1_036.
- R. Krasse, R. Browne, and R. Fullwood, “Practical Operating Problems at the RPI Linac”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 449-457.
- Yu. Senichev, T. Korsbjerg, S. P. M, and E. Zaplatine, “Solving the Problem of Heating of RF Contacts in Cavity Tuners”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 2P022, pp. 2923-2925.
- J.-M. Ortega, J. P. Berthet, F. Glotin, and R. Prazeres, “Study of the CLIO FEL in the Far-infrared in a Partially Guided Mode”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2859-2862.
- J. Teichert et al., “A Superconducting Photo-Injector with 3+1/2- Cell Cavity for the ELBE Linac”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPKF015, pp. 333-335.
- L. Somaschini et al., “Tuner System Simulation and Tests for the 201-MHz MICE Cavity”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3927-3929.
- F. Osmic et al., “Overview of the Beam Diagnostics in the MedAustron Accelerator: Design Choices and Test Beam Commissioning”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPR002, pp. 774-776.
- J. S. Eldred and R. M. Zwaska, “Proposed Cavity for Reduced Slip-Stacking Loss”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 600-603.
- M. Hostettler, K. Fuchsberger, and G. Papotti, “Operational Experience with Luminosity Scans for Beam Size Estimation in 2016 LHC Proton Physics Operation”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 374-376.
- T. Koeth, “SC Cavities at 3.9 GHz”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper TUA09, pp. 193-193.
- C. M. Lyneis, M. A. Leitner, D. Wutte, C. E. Taylor, and S. R. Abbott, “VENUS: The Next Generation ECR Ion Source”, in Proc. 16th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'01), East Lansing, MI, USA, May 2001, paper G-1, pp. XX-XX.
- N. Solyak, H. Edwards, I. Gonin, M. Foley, T. Khabiboulline, and D. Mitchell, “Development of the 3.9 GHz 3rd Harmonic Cavity at FNAL”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper TUP43, pp. 429-431.
- X. Zhang, W. W. Destler, M. Reiser, C. D. Striffler, and R. L. Yao, “Intense Electron Beam Propagation Across a Magnetic Field”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1035-1038.
- M. Gusarova, A. Krasnov, M. Lalayan, N. Sobenin, A. Zavadtsev, and D. Zavadtsev, “Input Coupler Development for Superconducting Cavity 500kW CW Power Feed”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper TUA15, pp. 215-217.
- M. Wenskat et al., “A Cross-Lab Qualification of Modified 120??C Baked Cavities”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 90-94.
- D. Rajaram and P. Snopok, “Muon Ionization Cooling Experiment Step VI”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPFI066, pp. 1502-1504.
- Y. C. Liao, C. Y. Li, X. Liu, B. Qin, W. Wang, and R. X. Zhao, “CSPT: A GPU-Accelerated Lattice Design Toolkit Especially for CCT”, in Proc. 23rd Int. Conf. Cyclotrons Appl. (Cyclotrons'22), Beijing, China, Dec. 2022, paper THPO004, pp. 299-302.
- J. Brossard, M. Desmons, B. M. Mercier, C. P. Prevost, and R. Roux, “Construction of the Probe Beam Photo-injector of CTF3”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPLS114, pp. 828-830.
- N. Tsoupas, H. Enge, and E. Forest, “Calculation of Aberration Coefficients up to Sixth Order of Multipole Focusing Elements”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper WE3-52, pp. 442-444.
- R. P. Johnson et al., “Tunable RF Cavities Using Orthogonally Biased Ferrite”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5PFP018, pp. 849-851.
- Z. Tang, A. Chen, and W. Chou, “A New Kind of Beam Pipe for Rapid Cycling Proton Synchrotrons”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper ROPB006, pp. 623-624.
- K. L. Mahoney, I. T. Carlino, K. Kindrew, T. L. Larrieu, T. S. McGuckin, and N. Okay, “Jefferson Lab Personnel Safety Electronic Log RMA”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper TUP046, pp. 188-190.
- M. L. Mallory, J. B. Ball, D. Dowling, E. D. H. Hudson, R. S. L. Lord, and A. Tatum, “ORIC Beam Energy Increase”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper FPAE032, pp. 2257-2259.
- S. Humphries, J. Petillo, and N. Dionne, “Modeling Secondary Emission in a Finite-Element Multipactor Code”, in Proc. 9th Int. Conf. RF Superconductivity (SRF'99), Santa Fe, NM, USA, Nov. 1999, paper WEP008, pp. 390-396.
- A. N. Ivanov and Y. Senichev, “Matrix Integration of ODEs for Spin-orbit Dynamics Simulation”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 400-402.
- K. Blasche, D. Boehne, B. Franczak, B. Franzke, and C. Riedel, “SIS-A Two Stage Synchrotron Facility for Heavy Ions”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2013-2016.
- M. Walter et al., “Beam Extraction Concepts and Design for the University of Maryland Electron Ring (UMER)”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPAS048, pp. 1754-1756.
- D. Calandroni and Y. Hiramoto, “A Simple Beam Chopper for TOF Experiments”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper D-24, pp. 317-319.
- A. Drozhdin, Y. Irie, N. Mokhov, N. Nakao, and M. Uota, “Beam Halo Collection for the JHF 3-GeV Synchrotron”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP23G, pp. 2315-2317.
- C. L. Li, A. M. Kiss, and W. J. Zhang, “Investigation of Continuous Scan Methods for Rapid Data Acquisition”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1243-1245.
- R. Tighe, “RF Feedback Simulation for the PEP-II B Facotry”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1957-1960.
- J. McCarrick, Y.-J. Chen, T. L. Houck, and B. R. Poole, “Trapping Backstreaming Ions from an X-ray Converter Using an Inductive Cell”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TH4028, pp. 833-835.
- L. Zeng et al., “The Beam-Based Alignment Simulation and Preliminary Experiment at SXFEL”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1804-1807.
- K. H. Chung, B. H. Choi, J. H. Hong, and S. K. Ko, “Development of Pellet Chain for Charge Carrying”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1021-1024.
- G. Andonian, P. Frigola, S. Reiche, J. B. Rosenzweig, S. Telfer, and G. Travish, “Status of the UCLA PEGASUS Laboratory”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPAB030, pp. 2110-2111.
- T. J. Smith, J. C. Frisch, E. M. Kraft, J. Loos, and G. S. Bentsen, “Thermal Acoustic Sensor for High Pulse Energy X-ray FEL Beams”, in Proc. 33rd Int. Free Electron Laser Conf. (FEL'11), Shanghai, China, Aug. 2011, paper WEPA02, pp. 334-336.
Back to search