Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] F. L. Krawczyk, S. J. Cooke, D. C. Nguyen, B. Rusnak, T. I. Smith, and E. L. Wright, “RF Design of a Spoke Resonator for High Power Free-Electron Lasers”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper THP037, pp. 866-866.
[n] K. Czuba et al., “Performance of Analog Signal Distribution in the ATCA Based LLRF System”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP293, pp. 666-668.
[n] A. A. Chesworth et al., “DIAMOND: A UK National Light Source Project”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEP72, pp. 2433-2435.
[n] J. L. Conradie et al., “New Developments and a Review of the Accelerator Facilities at iThemba LABS”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper WEXOR02, pp. 98-102.
[n] M. Wenskat, C. Bate, R. Ghanbari, W. Hillert, and C. Martens, “A New Ultra-High Vacuum Furnace for SRF R&D”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 855-858. doi:10.18429/JACoW-SRF2023-WEPWB111
[n] M. Othman, A. Gabriel, P. Kramer, E. Nanni, and X. Shen, “Terahertz Time Stamping Tool Development for SLAC MeV-UED”, presented at the IPAC'23, Venice, Italy, May 2023, paper TUPA057, unpublished.
[n] D. Arranger et al., “The MIRI Imager Ground Support Equipment Control System Based on PCs”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper TPPB06, pp. 172-174.
[n] A. H. Botha et al., “An Injector Cyclotron for Acceleration of Polarised and Heavy Ions at the NAC”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper I6-13, pp. 515-518.
[n] A. Carroll et al., “Large Acceptance Magnetic Focusing Horns for Production of a High Intensity Narrow Band Neutrino Beam at the AGS”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3054-3057.
[n] S. Heifets, “Broadband Impedance of the B Factory”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3459-3462.
[n] D. Marx et al., “Lattice design of the EIC electron storage ring for energies down to 5 GeV”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 104-107. doi:10.18429/JACoW-IPAC2023-MOPA037
[n] H. G. Blosser, D. A. Johnson, R. J. Burleigh, R. C. Niemann, and J. R. Purcell, “Superconducting Cyclotrons (Invited paper)”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper I-03, pp. 584-594.
[n] T. L. Houck, G. J. Caporaso, C. C. Shang, S. E. Sampayan, N. E. Molau, and M. L. Krogh, “Measured and Theoretical Characterization of the RF Properties of Stacked, High-Gradient Insulator Material”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9P107, pp. 2627-2629.
[n] I. Rutkowski, K. Czuba, and M. G. Grzegrzolka, “Local Oscillator Rear Transition Module for 704.42 MHz LLRF Control System at ESS”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 517. doi:10.18429/JACoW-ICALEPCS2019-MOPHA124
[n] T. Griesemer et al., “ALS-U accumulator ring raft and dipole installation”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1302-1304. doi:10.18429/JACoW-IPAC2024-TUPG35
[n] I. Wilson and H. Henke, “Thermal Analysis and Loss in Shunt Impedance of the LEP Accelerating Cell”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3590-3593.
[n] T. Raubenheimer et al., “Collective Effects in the NLC Damping Ring Designs”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPQ16, pp. 2986-2988.
[n] Y. Luo et al., “Dynamic aperture evaluation for the EIC Hadron storage ring with two interaction regions”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 93-96. doi:10.18429/JACoW-IPAC2023-MOPA031
[n] L. Walling, M. Burns, D. Liska, D. E. McMurry, and A. H. Shapiro, “Transverse Impedance Measurements of Prototype Cavities for a Dual-Axis Radiographic Hydrotest (DARHT) Facility”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2961-2964.
[n] A. Fisher, J. Pearlman, N. Rostoker, and K. Whitham, “Laser Extraction of an Electron Beam from a Modified Elongated Beatron Accelerator”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3048-3051.
[n] A. M. M. Todd, C. C. Paulson, and S. L. Mendelsohn, “The Neutral Particle Beam Space Experiment (NPBSE) Accelerator Designs”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1774-1777.
[n] U. Y. Yilmaz, M. G. P. T, and M. J. A. de Beer, “Driving Behavioural Change of Software Developers in a Global Organisation Assisted by a Paranoid Android”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 25-29. doi:10.18429/JACoW-ICALEPCS2023-MO2BCO01
[n] J. M. Patel et al., “Upgrade of the Canadian Light Source Booster RF System to Solid State”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4112-4114. doi:10.18429/JACoW-IPAC2019-THPTS006
[n] C. Boehme, I. Bekman, V. Kamerdzhiev, B. Lorentz, M. Simon, and C. Weidemann, “COSY Orbit Control Upgrade”, in Proc. IBIC'17, Grand Rapids, MI, USA, Aug. 2017, pp. 263-266. doi:10.18429/JACoW-IBIC2017-TUPCF20
[n] A. Drees et al., “Conceptual design of the Electron-Ion Collider (EIC) Electron Storage Ring (ESR) beam abort systems”, in Proc. NAPAC'25, Sacramento, California, USA, Aug. 2025, pp. 401-404. doi:10.18429/JACoW-NAPAC2025-TUP023
[n] N. Baboi et al., “Impedance Measurement Setup for Higher-Order Modes Studies in NLC Accelerating Structures with The Wire Method”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TH463, pp. 743-745.
[n] C. Hocini et al., “Proof of concept of a PLC based emittance meter for the NEWGAIN project”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 489-494. doi:10.18429/JACoW-ICALEPCS2025-TUMR019
[n] J. Fernandez Cortes, A. Antoine, B. Schofield, E. Blanco Vinuela, I. Romera, and M. Kalinowski, “Ensuring the fast response in the powering interlock controller (PIC) upgrade: a UNICOS-based approach”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 1590-1595. doi:10.18429/JACoW-ICALEPCS2025-THPD013
[n] J. Brodowski, J. T. Keane, A. W. Maschke, E. Meier, and R. M. Mobley, “500 kV Mercury Accelerator”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3039-3042.
[n] N. Greve, M. Brendike, D. K. Kraft, M. Neu, and G. Pfeiffer, “Status on Continuous Scans at BESSY II”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 513-517. doi:10.18429/JACoW-ICALEPCS2023-TUPDP013
[n] G. Machicoane et al., “Recent Advance in ECR Ion Sources”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 31-36. doi:10.18429/JACoW-NAPAC2019-MOYBB2
[n] H. N. Jungwirth et al., “Progress with New Beams and Facilities at NAC”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper I-09, pp. 625-628.
[n] S. Wilkes, A. Morgan, M. Warren, G. Karras, and I. Martin, “Investigations into operating Pulse Picking by Resonant Excitation (PPRE) in the vertical plane”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1071-1074. doi:10.18429/JACoW-IPAC2023-MOPM037
[n] A. Gotz et al., “State of the Tango Controls Kernel Development in 2019”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1235. doi:10.18429/JACoW-ICALEPCS2019-WEPHA058
[n] R. Cirami et al., “FORS-Up: An Upgrade of the FORS2 Instrument @ ESO VLT”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 252. doi:10.18429/JACoW-ICALEPCS2019-MOPHA029
[n] J.-B. de Martel, R. Gorbonosov, and N. Madysa, “Machine Learning Platform: Deploying and Managing Models in the CERN Control System”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 50-55. doi:10.18429/JACoW-ICALEPCS2021-MOBL03
[n] T. Tanabe, T. Rizawa, K. Ohtomo, and T. Katayama, “Development of MUSES-ACR Electron Cooler”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUP103, pp. 1722-1724.
[n] F. Eozenou et al., “Single Cell Electro-Polishing at CEA Saclay: First Results”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper TUP80, pp. XX-XX.
[n] D. Lampridis, T. Gingold, F. Vaga, T. Wlostowski, A. Wujek, and M. Malczak, “The Distributed Oscilloscope: A Large-Scale Fully Synchronised Data Acquisition System Over White Rabbit”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 726. doi:10.18429/JACoW-ICALEPCS2019-TUBPR01
[n] S. P. Kearney et al., “Design of Apparatus for a High-Power-Density Diamond Irradiation Endurance Experiment for XFELO Applications”, in Proc. FEL'17, Santa Fe, NM, USA, Aug. 2017, pp. 185-187. doi:10.18429/JACoW-FEL2017-MOP056
[n] R. Valdiviez, D. Schrage, H. Haagenstad, and J. Szalczinger, “The Thermal Expansion of Some Common Linac Materials”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TH474, pp. 767-769.
[n] A. D. Parsons et al., “P99: An Optical Beamline for Offline Technique Development and Systems Integration for Prototype Beamline Instrumentation”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 899. doi:10.18429/JACoW-ICALEPCS2019-WEBPP04
[n] Y. Zong et al., “Statistical analysis of field emission for SHINE project”, presented at the SRF'25, Tokyo, Japan, Sep. 2025, paper TUP26, unpublished.
[n] M. G. Abbott et al., “Implementation, Commissioning and Current Status of the Diamond Light Source Control System”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper TOAA05, pp. 56-58.
[n] N. Voumard et al., “Trigger synchronization unit consolidation for SPS and LHC dumping kickers systems”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 447-452. doi:10.18429/JACoW-ICALEPCS2025-TUMR008
[n] D. A. Gray, “Initial Operation of the SNS”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2638-2643.
[n] S. Schneider, A. H. Botha, J. C. Cornell, and P. G. Molteno, “The Beam Diagnostic System for the Transfer Beamline at the NAC”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper J20, pp. 407-410.
[n] O. V. Singh, “60 Hz Beam Motion Reduction at NSLS UV Storage Ring”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPQ27, pp. 2729-2731.
[n] A. Ratti et al., “Fabrication and Testing of the First Module of the SNS RFQ”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper THD05, pp. 911-913.
[n] L. R. Dalesio, A. J. Kozubal, and M. R. Kraimer, “EPICS Architecture”, in Proc. ICALEPCS'91, Tsukuba, Japan, Nov. 1991, pp. 278-282. doi:10.18429/JACoW-ICALEPCS1991-S07IC03
[n] H. N. Jungwirth, L. D. Bruins, A. H. Botha, and J. L. Pabot, “Design of Magnets for an Open-Sector Cyclotron”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper C-14, pp. 193-196.
[n] J. J. Song et al., “LIGA-Fabrication of mm-Wave Accelerating Cavity Structures at the Advanced Photon Source (APS)”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5B010, pp. 461-463.
[n] M. Champion, T. Berenc, M. May, and J. Reid, “Design and Prototype Tests of a Large-Aperture 37-53 MHz Ferrite-Tuned Booster Synchrotron Cavity”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH045, pp. 870-872.
[n] K. E. Deitrick et al., “A Hard X-Ray Compton Source at CBETA”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3765-3768. doi:10.18429/JACoW-IPAC2021-THPAB009
[n] P. Marchand, J. Cherix, C. Geiselhart, M. Pedrozzi, W. Portmann, and W. Tron, “Operation of the SLS RF System”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPRI009, pp. 712-714.
[n] R. Tikhoplav, A. Y. Murokh, and I. Jovanovic, “Progress Report on Development of Novel Ultrafast Mid-IR Laser System”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPP040, pp. 2810-2812.
[n] S. E. Sampayan et al., “High-Performance Insulator Structures for Accelerator Applications”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7P093, pp. 1308-1310.
[n] J. Hogan et al., “Design of SNS Cavity Support Structure”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH159, pp. 1158-1159.
For LaTeX
Use Complete Form
For BibTeX
References
- F. L. Krawczyk, S. J. Cooke, D. C. Nguyen, B. Rusnak, T. I. Smith, and E. L. Wright, “RF Design of a Spoke Resonator for High Power Free-Electron Lasers”, in Proc. 24th Linear Accelerator Conf. (LINAC'08), Victoria, Canada, Sep.-Oct. 2008, paper THP037, pp. 866-866.
- K. Czuba et al., “Performance of Analog Signal Distribution in the ATCA Based LLRF System”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP293, pp. 666-668.
- A. A. Chesworth et al., “DIAMOND: A UK National Light Source Project”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEP72, pp. 2433-2435.
- J. L. Conradie et al., “New Developments and a Review of the Accelerator Facilities at iThemba LABS”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper WEXOR02, pp. 98-102.
- M. Wenskat, C. Bate, R. Ghanbari, W. Hillert, and C. Martens, “A New Ultra-High Vacuum Furnace for SRF R&D”, in Proc. 21th Int. Conf. RF Superconductivity (SRF'23), Grand Rapids, MI, USA, Jun. 2023, paper WEPWB111, pp. 855-858.
- M. Othman, A. Gabriel, P. Kramer, E. Nanni, and X. Shen, “Terahertz Time Stamping Tool Development for SLAC MeV-UED”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPA057, unpublished.
- D. Arranger et al., “The MIRI Imager Ground Support Equipment Control System Based on PCs”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper TPPB06, pp. 172-174.
- A. H. Botha et al., “An Injector Cyclotron for Acceleration of Polarised and Heavy Ions at the NAC”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper I6-13, pp. 515-518.
- A. Carroll et al., “Large Acceptance Magnetic Focusing Horns for Production of a High Intensity Narrow Band Neutrino Beam at the AGS”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3054-3057.
- S. Heifets, “Broadband Impedance of the B Factory”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3459-3462.
- D. Marx et al., “Lattice design of the EIC electron storage ring for energies down to 5 GeV”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPA037, pp. 104-107.
- H. G. Blosser, D. A. Johnson, R. J. Burleigh, R. C. Niemann, and J. R. Purcell, “Superconducting Cyclotrons (Invited paper)”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper I-03, pp. 584-594.
- T. L. Houck, G. J. Caporaso, C. C. Shang, S. E. Sampayan, N. E. Molau, and M. L. Krogh, “Measured and Theoretical Characterization of the RF Properties of Stacked, High-Gradient Insulator Material”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9P107, pp. 2627-2629.
- I. Rutkowski, K. Czuba, and M. G. Grzegrzolka, “Local Oscillator Rear Transition Module for 704.42 MHz LLRF Control System at ESS”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 517.
- T. Griesemer et al., “ALS-U accumulator ring raft and dipole installation”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPG35, pp. 1302-1304.
- I. Wilson and H. Henke, “Thermal Analysis and Loss in Shunt Impedance of the LEP Accelerating Cell”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3590-3593.
- T. Raubenheimer et al., “Collective Effects in the NLC Damping Ring Designs”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TPQ16, pp. 2986-2988.
- Y. Luo et al., “Dynamic aperture evaluation for the EIC Hadron storage ring with two interaction regions”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPA031, pp. 93-96.
- L. Walling, M. Burns, D. Liska, D. E. McMurry, and A. H. Shapiro, “Transverse Impedance Measurements of Prototype Cavities for a Dual-Axis Radiographic Hydrotest (DARHT) Facility”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2961-2964.
- A. Fisher, J. Pearlman, N. Rostoker, and K. Whitham, “Laser Extraction of an Electron Beam from a Modified Elongated Beatron Accelerator”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3048-3051.
- A. M. M. Todd, C. C. Paulson, and S. L. Mendelsohn, “The Neutral Particle Beam Space Experiment (NPBSE) Accelerator Designs”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1774-1777.
- U. Y. Yilmaz, M. G. P. T, and M. J. A. de Beer, “Driving Behavioural Change of Software Developers in a Global Organisation Assisted by a Paranoid Android”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper MO2BCO01, pp. 25-29.
- J. M. Patel et al., “Upgrade of the Canadian Light Source Booster RF System to Solid State”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4112-4114.
- C. Boehme, I. Bekman, V. Kamerdzhiev, B. Lorentz, M. Simon, and C. Weidemann, “COSY Orbit Control Upgrade”, in Proc. 6th Int. Beam Instrumentation Conf. (IBIC'17), Grand Rapids, MI, USA, Aug. 2017, pp. 263-266.
- A. Drees et al., “Conceptual design of the Electron-Ion Collider (EIC) Electron Storage Ring (ESR) beam abort systems”, in Proc. 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, pp. 401-404.
- N. Baboi et al., “Impedance Measurement Setup for Higher-Order Modes Studies in NLC Accelerating Structures with The Wire Method”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper TH463, pp. 743-745.
- C. Hocini et al., “Proof of concept of a PLC based emittance meter for the NEWGAIN project”, in Proc. 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, pp. 489-494.
- J. Fernandez Cortes, A. Antoine, B. Schofield, E. Blanco Vinuela, I. Romera, and M. Kalinowski, “Ensuring the fast response in the powering interlock controller (PIC) upgrade: a UNICOS-based approach”, in Proc. 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, pp. 1590-1595.
- J. Brodowski, J. T. Keane, A. W. Maschke, E. Meier, and R. M. Mobley, “500 kV Mercury Accelerator”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3039-3042.
- N. Greve, M. Brendike, D. K. Kraft, M. Neu, and G. Pfeiffer, “Status on Continuous Scans at BESSY II”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper TUPDP013, pp. 513-517.
- G. Machicoane et al., “Recent Advance in ECR Ion Sources”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 31-36.
- H. N. Jungwirth et al., “Progress with New Beams and Facilities at NAC”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper I-09, pp. 625-628.
- S. Wilkes, A. Morgan, M. Warren, G. Karras, and I. Martin, “Investigations into operating Pulse Picking by Resonant Excitation (PPRE) in the vertical plane”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPM037, pp. 1071-1074.
- A. Gotz et al., “State of the Tango Controls Kernel Development in 2019”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 1235.
- R. Cirami et al., “FORS-Up: An Upgrade of the FORS2 Instrument @ ESO VLT”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 252.
- J.-B. de Martel, R. Gorbonosov, and N. Madysa, “Machine Learning Platform: Deploying and Managing Models in the CERN Control System”, in Proc. 18th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'21), Shanghai, China, Oct. 2021, pp. 50-55.
- T. Tanabe, T. Rizawa, K. Ohtomo, and T. Katayama, “Development of MUSES-ACR Electron Cooler”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUP103, pp. 1722-1724.
- F. Eozenou et al., “Single Cell Electro-Polishing at CEA Saclay: First Results”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper TUP80, pp. XX-XX.
- D. Lampridis, T. Gingold, F. Vaga, T. Wlostowski, A. Wujek, and M. Malczak, “The Distributed Oscilloscope: A Large-Scale Fully Synchronised Data Acquisition System Over White Rabbit”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 726.
- S. P. Kearney et al., “Design of Apparatus for a High-Power-Density Diamond Irradiation Endurance Experiment for XFELO Applications”, in Proc. 38th Int. Free Electron Laser Conf. (FEL'17), Santa Fe, NM, USA, Aug. 2017, pp. 185-187.
- R. Valdiviez, D. Schrage, H. Haagenstad, and J. Szalczinger, “The Thermal Expansion of Some Common Linac Materials”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper TH474, pp. 767-769.
- A. D. Parsons et al., “P99: An Optical Beamline for Offline Technique Development and Systems Integration for Prototype Beamline Instrumentation”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 899.
- Y. Zong et al., “Statistical analysis of field emission for SHINE project”, presented at the 22st International Conference on RF Superconductivity (SRF'25), Tokyo, Japan, Sep. 2025, paper TUP26, unpublished.
- M. G. Abbott et al., “Implementation, Commissioning and Current Status of the Diamond Light Source Control System”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper TOAA05, pp. 56-58.
- N. Voumard et al., “Trigger synchronization unit consolidation for SPS and LHC dumping kickers systems”, in Proc. 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, pp. 447-452.
- D. A. Gray, “Initial Operation of the SNS”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2638-2643.
- S. Schneider, A. H. Botha, J. C. Cornell, and P. G. Molteno, “The Beam Diagnostic System for the Transfer Beamline at the NAC”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper J20, pp. 407-410.
- O. V. Singh, “60 Hz Beam Motion Reduction at NSLS UV Storage Ring”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RPQ27, pp. 2729-2731.
- A. Ratti et al., “Fabrication and Testing of the First Module of the SNS RFQ”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper THD05, pp. 911-913.
- L. R. Dalesio, A. J. Kozubal, and M. R. Kraimer, “EPICS Architecture”, in Proc. 3rd International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'91), Tsukuba, Japan, Nov. 1991, paper S07IC03, pp. 278-282.
- H. N. Jungwirth, L. D. Bruins, A. H. Botha, and J. L. Pabot, “Design of Magnets for an Open-Sector Cyclotron”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper C-14, pp. 193-196.
- J. J. Song et al., “LIGA-Fabrication of mm-Wave Accelerating Cavity Structures at the Advanced Photon Source (APS)”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 5B010, pp. 461-463.
- M. Champion, T. Berenc, M. May, and J. Reid, “Design and Prototype Tests of a Large-Aperture 37-53 MHz Ferrite-Tuned Booster Synchrotron Cavity”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH045, pp. 870-872.
- K. E. Deitrick et al., “A Hard X-Ray Compton Source at CBETA”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3765-3768.
- P. Marchand, J. Cherix, C. Geiselhart, M. Pedrozzi, W. Portmann, and W. Tron, “Operation of the SLS RF System”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPRI009, pp. 712-714.
- R. Tikhoplav, A. Y. Murokh, and I. Jovanovic, “Progress Report on Development of Novel Ultrafast Mid-IR Laser System”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPP040, pp. 2810-2812.
- S. E. Sampayan et al., “High-Performance Insulator Structures for Accelerator Applications”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 7P093, pp. 1308-1310.
- J. Hogan et al., “Design of SNS Cavity Support Structure”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH159, pp. 1158-1159.
Back to search