JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	J. W. McKenzie et al., “High Repetition Rate S-band Photoinjector Design for the CLARA FEL”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper THP064, pp. 889-892. 
[n]	A. Faus-Golfe, C. Blanch Gutierrez, J. V. Civera-Navarrete, and J. J. Garc?¡a-Garrig??s, “Development and Test Benchmarks of the Beam Position Monitor Series for the TBL line of the CTF3 at CERN”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPE051, pp. 1086-1088. 
[n]	P. V. Logachev et al., “Performance of 2 MeV, 2 kA, 200 ns Linear Induction Accelerator with Ultra Low Beam Emittance for X-Ray Flash Radiography”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEOAA02, pp. 1906-1908. 
[n]	Y. Jongen et al., “Current Status of the IBA C400 Cyclotron Project for Hadron Therapy”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPP120, pp. 1806-1808. 
[n]	P. Mantsch, J. Carson, M. J. Lamm, and A. Riddiford, “A New High-Gradient Correction Quadrupole for the Fermilab Luminosity Upgrade”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 512-515. 
[n]	S. M. Liuzzo et al., “Update on the EBS Storage Ring Beam Dynamics Digital Twin”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1306-1311. doi:10.18429/JACoW-ICALEPCS2023-THPDP010
[n]	Z. Liu et al., “Collimation Design and Beam Loss Detection at FRIB”, in Proc. HB'16, Malmö, Sweden, Jul. 2016, pp. 400-403. doi:10.18429/JACoW-HB2016-WEPM8X01
[n]	J.-E. Chen, Z. Y. Guo, and K. X. Liu, “The Progress of Accelerator Mass Spectrometry and their Applications in China”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper THZH103, pp. 597-600. 
[n]	R. T. Jongma et al., “Design of the Nijmegen High-Resolution THz-FEL”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper TUAAU05, pp. 200-203. 
[n]	L. Hagge et al., “Experience and Benefits from PLM-based Parts Management at European XFEL”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPFI008, pp. 3306-3308. 
[n]	H. Aksakal, A. K. Ciftci, Z. Nergiz, D. Schulte, and F. Zimmermann, “Luminosity Upgrade of CLIC-LHC ep/gp Collider”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMN064, pp. 2853-2855. 
[n]	A. Tuzikov et al., “Heavy Ion Injection Chain of NICA Collider”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 52-54. doi:10.18429/JACoW-RUPAC2018-TUCDMH01
[n]	A. Novokhatski, M. Timm, and T. Weiland, “The Transverse Wakefields in the TESLA-FEL Transfer Line”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP31G, pp. 1350-1352. 
[n]	S. Binello, T. D, J. S. Laster, and D. P. Ottavio, “Monitoring Applications Once They Are in the User Community”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEA005, pp. 370-372. 
[n]	Y. Luo et al., “Head-on Beam-beam Compensation with Electron Lenses in the Relativistic Heavy Ion Collider”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC113, pp. 328-330. 
[n]	M. A. Palmer, “An Overview of the US Muon Accelerator Program”, in Proc. COOL'13, Mürren, Switzerland, Jun. 2013, paper MOAM2HA02, pp. 16-20. 
[n]	J. C. L. Brazier, A. Dinius, and P. Semanaz, “Evolution of the SPS Power Converter Controls Towards the LHC Era”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper WEAP017, pp. XX-XX. 
[n]	I. Podadera Aliseda, B. Bra??as, A. Ibarra, and J. Marroncle, “Design of Beam Position Monitors for the IFMIF-EVEDA accelerator”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper MOPD06, pp. 53-55. 
[n]	Y. Kurimoto, Y. H. Chin, T. Obina, M. Tobiyama, T. Toyama, and Y. Shobuda, “The Bunch by Bunch Feedback System in J-PARC Main Ring”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper TUPD74, pp. 482-484. 
[n]	P. Sha et al., “Research and Development of 650 MHz Cavities for CEPC”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 616. doi:10.18429/JACoW-SRF2021-WEPCAV012
[n]	Y. M. Pischalnikov, E. Borissov, T. N. Khabiboulline, and J. C. Yun, “LCLS-II Tuner Assembly for the Prototype Cryomodule at FNAL”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 143-145. doi:10.18429/JACoW-NAPAC2016-MOPOB33
[n]	A. A. Bulavskaya, Yu. M. Cherepennikov, A. A. Grigorieva, I. A. Miloichikova, and S. Stuchebrov, “Determination of Minimal Acceptable Sizes of Collimation Hole in Plastic Sample Forming Ejected Therapeutic High-Energy Electron Beam”, presented at the RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, paper MOPSA37, unpublished. 
[n]	M. Hu et al., “Uniform Longitudinal Beam Profiles in the Fermilab Recycler Using Adaptive RF Correction”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAS011, pp. 458-460. 
[n]	G. Di Pirro, A. Cianchi, D. Filippetto, S. Fioravanti, and E. Pace, “The Camera Acquisition System in the SPARC Control System”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEP043, pp. 486-488. 
[n]	A. H. Lumpkin et al., “Higher-Order-Mode Effects in Tesla-Type Superconducting RF Cavities on Electron Beam Quality”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 612-615. doi:10.18429/JACoW-IPAC2018-TUXGBF2
[n]	J. King, “Potential Hazards from Neutrino Radiation at MUON Colliders”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEBR6, pp. 318-320. 
[n]	A. Cattoni, G. Raffone, and C. Sanelli, “Magnets and Power Supplies for ARES”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1136-1139. 
[n]	D. Boehne, “Future Accelerator Projects and Collaboration with Industry”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 71-74. 
[n]	Z. Liu, S. M. Cousineau, J. Galambos, J. A. Holmes, X. Huang, and M. A. Plum, “Orbit Response Matrix Analysis Applied at SNS Ring”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper WGA15, pp. 89-91. 
[n]	A. Rossi, I. Collins, J. R. Knaster, P. Lepeule, and R. Veness, “Vacuum Calculations for the LHC Experimental Beam Chambers”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPAH129, pp. 3153-3155. 
[n]	Y. M. Zhou, S. S. Cao, J. Chen, and Y. B. Leng, “Prototype Design of Bunch Arrival Time Measurement System Based on Cavity Monitor for SHINE”, in Proc. IBIC'20, Santos, Brazil, Sep. 2020, pp. 154-157. doi:10.18429/JACoW-IBIC2020-WEPP24
[n]	M. D. Woodley and P. J. Emma, “Measurement and Correction of Cross-Plane Coupling in Transport Lines”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper MOC19, pp. 196-198. 
[n]	D. Luo et al., “Solenoid/Magnetic Shielding Test Results in FRIB-1&2 Cryomodules”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 607-609. doi:10.18429/JACoW-LINAC2016-TUPLR067
[n]	N. Akasaka, H. Koiso, and K. Oide, “Operation Software for Commissioning of KEKB Linac Programmed with SAD”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5D043, pp. 495-497. 
[n]	C. Steier, D. S. Robin, Y. Wu, W. Decking, J. Laskar, and L. Nadolski, “Understanding the Dynamic Momentum Aperture of the Advanced Light Source”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WOPB003, pp. 434-436. 
[n]	R. Wanzenberg, O. Zagorodnova, E. M?â, and B. Salvant, “Calculation of Wakefields and Higher Order Modes for the Vacuum Chamber of the CMS, ATLAS, ALICE and LHCb Experiments for the HL-LHC”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3081-3083. doi:10.18429/JACoW-IPAC2017-WEPIK066
[n]	F. Curbis et al., “Seeded Coherent Harmonic Generation with in-line Gas Target”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper TUPD15, pp. 265-267. 
[n]	M. Goerlitz and W. A. Caliebe, “A New Three-Signal 2D-Beam-Position-Monitor Based on a Segmented Ionization Chamber”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 243. doi:10.18429/JACoW-MEDSI2020-WEPA09
[n]	S. A. Kahn et al., “Focusing Horn System for the BNL Very Long Baseline Neutrino Oscillation Experiment”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPPG036, pp. 3255-3257. 
[n]	G. Fernqvist, M. C. Bastos, A. Cantone, and Q. King, “Developments in High-precision Aspects of Power Converter Control for LHC”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAN070, pp. 314-316. 
[n]	A. T. Wu et al., “Advance in Vertical Buffered Electropolishing on Niobium for Particle Accelerators”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC117, pp. 352-354. 
[n]	S. Ito, H. Matsuzaki, Y. Miyairi, A. Morita, N. Nakano, and Y. Sunohara, “Status Report on RAPID, 1.7MV Tandem Accelerator System, the University of Tokyo”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEA061, pp. 217-219. 
[n]	R. Klatt et al., “MAFIA - A Three-Dimensional Electromagnetic CAD System for Magnets, RF Structures, and Transient Wake-Field Calculations”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper WE3-13, pp. 276-278. 
[n]	J. R?Ânsch et al., “First Measurements of the Longitudinal Phase Space Distribution using the New High Energy Dispersive Section at PITZ”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper TUPD29, pp. 360-362. 
[n]	C. Pagani, “Superconducting RF Activities at INFN Milano-LASA”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper MOP008, pp. 58-61. 
[n]	M. Liepe, S. Belomestnykh, V. Medjidzade, and V. Shemelin, “Broadband HOM Absorber for the Cornell ERL”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper THP57, pp. 599-599. 
[n]	S. Rajagopalan, “Plasma Focusing of the Final Test Beam”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3555-3558. 
[n]	P. Varghese et al., “Multichannel Vector Field Control Module for LLRF Control of Superconducting Cavities”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMN112, pp. 2298-2300. 
[n]	B. Yildirim, S. Choroba, V. V. Katalev, P. Morozov, Y. Nachtigal, and E. M. Apostolov, “Series Production of the Specific Waveguide Distribution for the European XFEL at DESY”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 380-383. doi:10.18429/JACoW-LINAC2018-TUPO027
[n]	B. Giaccone et al., “Plasma Processing to Reduce Field Emission in LCLS-II 1.3 GHz SRF Cavities”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 1231-1238. doi:10.18429/JACoW-SRF2019-FRCAB7
[n]	M. K. Fukuda et al., “Improvement of X-Ray Generation by Using Laser Compton Scattering in Laser Undulator Compact X-Ray Source(LUCX)”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 1207-1209. doi:10.18429/JACoW-NAPAC2016-THPOA51
[n]	J. T. Seeman, “Beam Instrumentation Needs for a Future Electron-Positron Collider Based on PEP-II Observations”, in Proc. eeFACT'16, Daresbury, UK, Oct. 2016, pp. 157-163. doi:10.18429/JACoW-eeFACT2016-WET1H1
[n]	P. Evtushenko, A. Freyberger, C. Liu, and A. H. Lumpkin, “Near-Field Optical Diffraction Radiation Measurements at CEBAF”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper TUPPH011, pp. 254-257. 
[n]	W. W. MacKay et al., “Commissioning and Future Plans for Polarized Protons in RHIC”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MOPA004, pp. 24-26. 
[n]	M. A. Kempkes, F. O. Arntz, M. P. J. Gaudreau, A. Kardo-Sysoev, and A. Krasnykh, “A Kicker Driver for the International Linear Collider”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMN111, pp. 2972-2974. 
[n]	S. Ghosh, A. Mandal, S. Seth, and S. S. Som, “Bead-pull Measurement using Phase-Shift Technique in Multi-cell Elliptical Cavity”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC088, pp. 280-282. 
[n]	F. Orsini et al., “Study and Realization of the First Superconducting Half Wave Resonator Prototype for the SRF Linac of the IFMIF Project”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEC057, pp. 591-593. 
[n]	K. Seiya et al., “Alignment and Aperture Scan at the Fermilab Booster”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPP024, pp. 3785-3787. 
[n]	S. G. Arutunian et al., “PETRA Proton Beam Profiling by Vibrating Wire Scanner”, in Proc. DIPAC'05, Lyon, France, Jun. 2005, paper POT016, pp. XX-XX. 
[n]	R. Müller et al., “Orbit Drift Correction Using Correctors with Ultra-High DAC Resolution”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH301, pp. 1180-1182. 
[n]	I. R. Bailey et al., “Spin Tracking at the International Linear Collider”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMN083, pp. 2901-2903. 
[n]	D. Romanini et al., “RF Tests of a Fully Electroformed 500 MHz Four Cell Copper Cavity”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1091-1094. 
[n]	EE. Lee, K. H. Chung, H. G. Joo, S. K. Kauh, and S. K. Ko, “Physics Design of a Photo Fission Ion Source (PHIS)”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEC063, pp. 4200-4201. 
[n]	K. Saito and M. Wake, “A New Material Evaluation Method on Niobium by Magnetization Measurement”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper SRF95F05, pp. 553-557. 
[n]	M. Blaskiewicz, J. M. Brennan, and K. Mernick, “RHIC Luminosity Increase with Bunched Beam Stochastic Cooling”, in Proc. COOL'13, Mürren, Switzerland, Jun. 2013, paper MOAM1HA02, pp. 6-10. 
[n]	H. Bartosik et al., “Recent Beam Performance Achievements with the Pb-Ion Beam in the SPS for LHC Physics Runs”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 250-253. doi:10.18429/JACoW-IPAC2019-MOPGW069
[n]	Y. Yamazaki, “The Japan Hadron Facility Accelerator”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5A002, pp. 314-318. 
[n]	G. Tranquille, C. B. Bal, V. Prieto, and R. S. Sautier, “First Results from the LEIR Ionisation Profile Monitors”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper TUPB24, pp. 120-122. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search