Warning
Some papers titles are all uppercase, you must correct this before using this reference.
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] D. A. Liakin, S. V. Barabin, and A. Y. Orlov, “A Digital Low-Level RF System for Resonant Beam Deflector of LAPLAS Experiment”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper THPSC34, pp. 395-397.
[n] A. Faltens and C. Kerns, “Fast Beam Choppers for the Electron-Ring Accelerator”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 1059-1061.
[n] A. Hutton and M. S. Zisman, “An Asymmetric B Factory Based on PEP”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 389-392.
[n] M. Ben Abdillah and F. Fournier, “Beam Position Monitor for MYRRHA 17-100MeV Section”, in Proc. IBIC'21, Pohang, Korea, Sep. 2021, pp. 40-43. doi:10.18429/JACoW-IBIC2021-MOPP07
[n] U. Lehnert et al., “Conceptual facility design of the Dresden Advanced Light Infrastracture”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper MOPG33, unpublished.
[n] S. Weih et al., “Status and First Tests of the Reduced-Beta Capture Cavity for the S-DALINAC”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 597. doi:10.18429/JACoW-SRF2021-WEPCAV007
[n] D. A. Liakin, S. V. Barabin, and A. Y. Orlov, “Digital Signal Processing Algorithms for Linac Low-Level RF Systems”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper THPSC33, pp. 392-394.
[n] M. G. Minty, R. D?Âlling, N. V. Mokhov, and T. Toyama, “Summary from Working Group F: Instrumentation and Beam Material Interactions”, in Proc. HB'14, East Lansing, MI, USA, Nov. 2014, paper FRO2AU02, pp. 453-460.
[n] Y.-C. Liu et al., “Operation Experience at Taiwan Light Source”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPEA061, pp. 220-221.
[n] M. Fujimoto et al., “FEL Gain Measurement with a Novel Method”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper WEPD64, pp. 515-518.
[n] D. A. Bartkoski, A. V. Aleksandrov, S. M. Cousineau, S. Henderson, and J. A. Holmes, “The Development of Computational Tools for Halo Analysis and Study of Halo Growth in the Spallation Neutron Source Linear Accelerator”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THOAFI01, pp. 2768-2770.
[n] S. Krainara et al., “Observation of Beam Loss Signal at the SPS Storage Ring”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 187-189. doi:10.18429/JACoW-IBIC2015-MOPB057
[n] G. Arnolds-Mayer et al., “Radio Frequency Superconductivity at CERN: A Status Report”, in Proc. SRF'87, Lemont, IL, USA, Sep. 1987, paper SRF87A04, pp. XX-XX.
[n] Ch. Wang et al., “System Integration and Beam Commissioning of the 500-MHz RF Systems for Taiwan Photon Source”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2234-2236. doi:10.18429/JACoW-IPAC2016-WEPMB052
[n] O. Utke, S. Chaichuay, S. Klinkhieo, S. Pongampai, K. Sittisard, and S. Srichan, “Design of Magnet Girder System for Siam Photon Source II”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 138. doi:10.18429/JACoW-MEDSI2020-TUPA10
[n] M. Keesee, R. Dickson, and R. Flood V, “The Timing Synchronization System at Jefferson Lab”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper TUAP070, pp. XX-XX.
[n] S. Suphakul, S. Rimjaem, and C. Thongbai, “Beam Dynamics Simulation and Optimization of Electron Beam Properties for IR-FELs at Chiang Mai University”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper WEPD34, pp. 445-448.
[n] R. D?Âlling, N. Hayashi, and V. E. Scarpine, “Qinclosing Plenary Summary of Working Group E:Diagnostics and Instrumentation for High-Intensity Beams”, in Proc. HB'12, Beijing, China, Sep. 2012, paper FRO1B02, pp. 625-626.
[n] N. Hubert et al., “SOLEIL Upgrade Project and Foreseen Beam Instrumentation”, in Proc. IBIC'21, Pohang, Korea, Sep. 2021, pp. 26-29. doi:10.18429/JACoW-IBIC2021-MOPP03
[n] Y. Zhang et al., “Overview of Beam Instruments at the Prototype Front-End Linac for Chinese Accelerator-Driven Subcritical System (CiADS)”, presented at the IBIC'21, Pohang, Korea, Sep. 2021, paper MOPP01, unpublished.
[n] Y. Y. Guo, Y. Jiao, and N. Li, “Effect of Different Models of Combined-function Dipoles on the HEPS Parameters”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 335-338. doi:10.18429/JACoW-IPAC2021-MOPAB089
[n] N. Juntong et al., “Seven years statistical analysis of the Siam photon source operation”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1042-1045. doi:10.18429/JACoW-IPAC2023-MOPM027
[n] H. Hotchi, S. Machida, and F. Noda, “Effects of Magnetic Field Tracking Errors on Beam Dynamics at J-PARC RCS”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMN046, pp. 4078-4080.
[n] M. Liu, D. K. Liu, C. X. Yin, and L. Y. Zhao, “A New Timing System: the Real-time Synchronized Data Bus”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEA032, pp. 1396-1398.
[n] J. Y. Xu and H. S. Xu, “Longitudinal Dynamics with Harmonic Cavities under the Over-stretching Conditions”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1939-1941. doi:10.18429/JACoW-IPAC2021-TUPAB220
[n] J.-B. Lallement, “Experience with the Construction and Commissioning of Linac4”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 342-347. doi:10.18429/JACoW-LINAC2016-TU1A03
[n] T. Torims, “3D Printing (Additive Manufacturing) Applied to Accelerator Components”, presented at the HIAT'22, Darmstadt, Germany, Jun.-Jul. 2022, paper TU1I1, unpublished.
[n] Z. M. Dai, D. K. Liu, L. G. Liu, L. Yin, and Z. T. Zhao, “Status of the SSRF Storage Ring”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC008, pp. 1998-2000.
[n] D. Kayran et al., “Beam Commissioning Results From the R&D ERL at BNL”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 374-379. doi:10.18429/JACoW-LINAC2016-TU3A01
[n] Q. Kerns et al., “Fermilab Tevatron High Level RF Accelerating Systems”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2809-2812.
[n] X. L. Zhang, S. Kurokawa, H. Fukuma, and K. Yokoya, “Simulation Study of Fast Beam-Ion Instability”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5D024, pp. 444-446.
[n] H. P. Hsueh et al., “The Optimization of Transverse Stripline Kicker”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPEA059, pp. 214-216.
[n] F. M??ller, T. Feurer, S. Hunziker, V. Schlott, B. Steffen, and D. M. Treyer, “Ytterbium Fiber Laser for Electro-Optical Pulse Length Measurements at the SwissFEL”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper TUPD31, pp. 366-368.
[n] H. Huttunen, F. Asvesta, E. Benedetto, V. Sansipersico, and G. Tranquille, “Orbit error correction schemes for the Helium Light Ion Compact Synchrotron HeLICS”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper WEPM114, unpublished.
[n] R. Penrose, “Before the Big Bang: An Outrageous New Perspective and its Implications for Particle Physics”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THESPA01, pp. 2759-2762.
[n] S. Artikova, Y. Kondo, T. Mibe, and M. Otani, “Deflector Design for Spin Rotator in Muon Linear Accelerator”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 830-832. doi:10.18429/JACoW-LINAC2016-THPRC028
[n] C. Benvenuti, R. Calder, and N. Hilleret, “A Vacuum Cold Bore Test Section at the Cern ISR”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1373-1376.
[n] T. Ota, T. Iimura, T. Nagafuchi, K. Satoh, O. Takeda, and Y. Tanabe, “Transient Characteristics of a Solid Sector Bending Magnet for Use in Compact Storage Ring”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2238-2241.
[n] G. Isoyama et al., “THE REASSEMBLY OF THE SIAM PHOTON SOURCE”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper WEDM06, pp. XX-XX.
[n] A. Y. Molodojentsev, S. Machida, and Y. Mori, “Nonlinear field Effects in the JPARC Main Ring”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT107, pp. 2101-2103.
[n] O. Takeda et al., “Design Study on an 80 MHz RFq Linac for Heavy Ions”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1334-1337.
[n] K. Ha et al., “NSLS-II bunch by bunch BPM development and beam operation”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2191-2194. doi:10.18429/JACoW-IPAC2024-WEPG08
[n] D. Boussard and T. Linnecar, “Longitudinal Head-Tail Instability in the CERN-SPS Collider”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1560-1563.
[n] F. Gerigk, “Review on Trends in Normal Conducting Linacs for Protons, Ions and Electrons, With Emphasis on New Technologies and Applications”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 336-341. doi:10.18429/JACoW-LINAC2016-TU1A01
[n] R. D?Âlling, “Progress with Bunch-shape Measurements at PSI's High-power Cyclotrons and Proton Beam Lines”, in Proc. HB'12, Beijing, China, Sep. 2012, paper MOP253, pp. 187-191.
[n] U. Bechstedt et al., “The Performance of COSY”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP11F, pp. 541-543.
[n] P. A. Thompson et al., “Superconducting Magnet System for RHIC”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3698-3701.
[n] T. Kanemura et al., “Liquid lithium charge stripping technology: Achievement and lessons learned”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper MOYD2, unpublished.
[n] A. Lajoie, A. Hershcovitch, P. Thieberger, and F. Marti, “Plasma Window as Charge Stripper Complement”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 836-839. doi:10.18429/JACoW-LINAC2016-THPRC030
[n] A. Puntambekar et al., “Experiences with the Manufacturing, Testing and Quality Control of Large Number of Superconducting Magnets”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper THC2MA02, pp. 567-569.
[n] V. Chohan, Z. Y. Guo, C. D. Johnson, and E. J. N. Wilson, “Antiproton Losses at Large Transverse Amplitudes in the CERN Antiproton Accumulator and Corrective Measures Using Skew Quadrupoles and Sextupoles”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2231-2234.
[n] F. F. Wu et al., “Preliminary Design and Calculation of Button BPM for the HALS Storage Ring”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4929-4931. doi:10.18429/JACoW-IPAC2018-THPML112
[n] T. Torims et al., “Evaluation of Geometrical Precision and Surface Roughness Quality for the Additively Manufactured Radio Frequency Quadrupole Prototype”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 787-791. doi:10.18429/JACoW-IPAC2022-TUOXSP3
[n] R. Rossmanith, A. Geisler, A. Hobl, and M. Schillo, “A Superconducting Short Period Undulator”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TOPA006, pp. 233-235.
For LaTeX
Use Complete Form
For BibTeX
References
- D. A. Liakin, S. V. Barabin, and A. Y. Orlov, “A Digital Low-Level RF System for Resonant Beam Deflector of LAPLAS Experiment”, in Proc. 24th Russian Particle Accelerator Conf. (RuPAC'14), Obninsk, Russia, Oct. 2014, paper THPSC34, pp. 395-397.
- A. Faltens and C. Kerns, “Fast Beam Choppers for the Electron-Ring Accelerator”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 1059-1061.
- A. Hutton and M. S. Zisman, “An Asymmetric B Factory Based on PEP”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 389-392.
- M. Ben Abdillah and F. Fournier, “Beam Position Monitor for MYRRHA 17-100MeV Section”, in Proc. 10th Int. Beam Instrumentation Conf. (IBIC'21), Pohang, Korea, Sep. 2021, pp. 40-43.
- U. Lehnert et al., “Conceptual facility design of the Dresden Advanced Light Infrastracture”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPG33, unpublished.
- S. Weih et al., “Status and First Tests of the Reduced-Beta Capture Cavity for the S-DALINAC”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 597.
- D. A. Liakin, S. V. Barabin, and A. Y. Orlov, “Digital Signal Processing Algorithms for Linac Low-Level RF Systems”, in Proc. 24th Russian Particle Accelerator Conf. (RuPAC'14), Obninsk, Russia, Oct. 2014, paper THPSC33, pp. 392-394.
- M. G. Minty, R. D?Âlling, N. V. Mokhov, and T. Toyama, “Summary from Working Group F: Instrumentation and Beam Material Interactions”, in Proc. 54th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'14), East Lansing, MI, USA, Nov. 2014, paper FRO2AU02, pp. 453-460.
- Y.-C. Liu et al., “Operation Experience at Taiwan Light Source”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPEA061, pp. 220-221.
- M. Fujimoto et al., “FEL Gain Measurement with a Novel Method”, in Proc. 34th Int. Free Electron Laser Conf. (FEL'12), Nara, Japan, Aug. 2012, paper WEPD64, pp. 515-518.
- D. A. Bartkoski, A. V. Aleksandrov, S. M. Cousineau, S. Henderson, and J. A. Holmes, “The Development of Computational Tools for Halo Analysis and Study of Halo Growth in the Spallation Neutron Source Linear Accelerator”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THOAFI01, pp. 2768-2770.
- S. Krainara et al., “Observation of Beam Loss Signal at the SPS Storage Ring”, in Proc. 4th Int. Beam Instrumentation Conf. (IBIC'15), Melbourne, Australia, Sep. 2015, pp. 187-189.
- G. Arnolds-Mayer et al., “Radio Frequency Superconductivity at CERN: A Status Report”, in Proc. 3rd Int. Conf. RF Superconductivity (SRF'87), Lemont, IL, USA, Sep. 1987, paper SRF87A04, pp. XX-XX.
- Ch. Wang et al., “System Integration and Beam Commissioning of the 500-MHz RF Systems for Taiwan Photon Source”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2234-2236.
- O. Utke, S. Chaichuay, S. Klinkhieo, S. Pongampai, K. Sittisard, and S. Srichan, “Design of Magnet Girder System for Siam Photon Source II”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 138.
- M. Keesee, R. Dickson, and R. Flood V, “The Timing Synchronization System at Jefferson Lab”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper TUAP070, pp. XX-XX.
- S. Suphakul, S. Rimjaem, and C. Thongbai, “Beam Dynamics Simulation and Optimization of Electron Beam Properties for IR-FELs at Chiang Mai University”, in Proc. 34th Int. Free Electron Laser Conf. (FEL'12), Nara, Japan, Aug. 2012, paper WEPD34, pp. 445-448.
- R. D?Âlling, N. Hayashi, and V. E. Scarpine, “Qinclosing Plenary Summary of Working Group E:Diagnostics and Instrumentation for High-Intensity Beams”, in Proc. 52nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'12), Beijing, China, Sep. 2012, paper FRO1B02, pp. 625-626.
- N. Hubert et al., “SOLEIL Upgrade Project and Foreseen Beam Instrumentation”, in Proc. 10th Int. Beam Instrumentation Conf. (IBIC'21), Pohang, Korea, Sep. 2021, pp. 26-29.
- Y. Zhang et al., “Overview of Beam Instruments at the Prototype Front-End Linac for Chinese Accelerator-Driven Subcritical System (CiADS)”, presented at the 10th Int. Beam Instrumentation Conf. (IBIC'21), Pohang, Korea, Sep. 2021, paper MOPP01, unpublished.
- Y. Y. Guo, Y. Jiao, and N. Li, “Effect of Different Models of Combined-function Dipoles on the HEPS Parameters”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 335-338.
- N. Juntong et al., “Seven years statistical analysis of the Siam photon source operation”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPM027, pp. 1042-1045.
- H. Hotchi, S. Machida, and F. Noda, “Effects of Magnetic Field Tracking Errors on Beam Dynamics at J-PARC RCS”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRPMN046, pp. 4078-4080.
- M. Liu, D. K. Liu, C. X. Yin, and L. Y. Zhao, “A New Timing System: the Real-time Synchronized Data Bus”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEA032, pp. 1396-1398.
- J. Y. Xu and H. S. Xu, “Longitudinal Dynamics with Harmonic Cavities under the Over-stretching Conditions”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 1939-1941.
- J.-B. Lallement, “Experience with the Construction and Commissioning of Linac4”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 342-347.
- T. Torims, “3D Printing (Additive Manufacturing) Applied to Accelerator Components”, presented at the 15th International Conference on Heavy Ion Accelerator Technology (HIAT'22), Darmstadt, Germany, Jun.-Jul. 2022, paper TU1I1, unpublished.
- Z. M. Dai, D. K. Liu, L. G. Liu, L. Yin, and Z. T. Zhao, “Status of the SSRF Storage Ring”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC008, pp. 1998-2000.
- D. Kayran et al., “Beam Commissioning Results From the R&D ERL at BNL”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 374-379.
- Q. Kerns et al., “Fermilab Tevatron High Level RF Accelerating Systems”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2809-2812.
- X. L. Zhang, S. Kurokawa, H. Fukuma, and K. Yokoya, “Simulation Study of Fast Beam-Ion Instability”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 5D024, pp. 444-446.
- H. P. Hsueh et al., “The Optimization of Transverse Stripline Kicker”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPEA059, pp. 214-216.
- F. M??ller, T. Feurer, S. Hunziker, V. Schlott, B. Steffen, and D. M. Treyer, “Ytterbium Fiber Laser for Electro-Optical Pulse Length Measurements at the SwissFEL”, in Proc. 9th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'09), Basel, Switzerland, May 2009, paper TUPD31, pp. 366-368.
- H. Huttunen, F. Asvesta, E. Benedetto, V. Sansipersico, and G. Tranquille, “Orbit error correction schemes for the Helium Light Ion Compact Synchrotron HeLICS”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEPM114, this conference.
- R. Penrose, “Before the Big Bang: An Outrageous New Perspective and its Implications for Particle Physics”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THESPA01, pp. 2759-2762.
- S. Artikova, Y. Kondo, T. Mibe, and M. Otani, “Deflector Design for Spin Rotator in Muon Linear Accelerator”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 830-832.
- C. Benvenuti, R. Calder, and N. Hilleret, “A Vacuum Cold Bore Test Section at the Cern ISR”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1373-1376.
- T. Ota, T. Iimura, T. Nagafuchi, K. Satoh, O. Takeda, and Y. Tanabe, “Transient Characteristics of a Solid Sector Bending Magnet for Use in Compact Storage Ring”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2238-2241.
- G. Isoyama et al., “THE REASSEMBLY OF THE SIAM PHOTON SOURCE”, in Proc. 2nd Asian Particle Accelerator Conf. (APAC'01), Beijing, China, Sep. 2001, paper WEDM06, pp. XX-XX.
- A. Y. Molodojentsev, S. Machida, and Y. Mori, “Nonlinear field Effects in the JPARC Main Ring”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPLT107, pp. 2101-2103.
- O. Takeda et al., “Design Study on an 80 MHz RFq Linac for Heavy Ions”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1334-1337.
- K. Ha et al., “NSLS-II bunch by bunch BPM development and beam operation”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPG08, pp. 2191-2194.
- D. Boussard and T. Linnecar, “Longitudinal Head-Tail Instability in the CERN-SPS Collider”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1560-1563.
- F. Gerigk, “Review on Trends in Normal Conducting Linacs for Protons, Ions and Electrons, With Emphasis on New Technologies and Applications”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 336-341.
- R. D?Âlling, “Progress with Bunch-shape Measurements at PSI's High-power Cyclotrons and Proton Beam Lines”, in Proc. 52nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'12), Beijing, China, Sep. 2012, paper MOP253, pp. 187-191.
- U. Bechstedt et al., “The Performance of COSY”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP11F, pp. 541-543.
- P. A. Thompson et al., “Superconducting Magnet System for RHIC”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3698-3701.
- T. Kanemura et al., “Liquid lithium charge stripping technology: Achievement and lessons learned”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOYD2, this conference.
- A. Lajoie, A. Hershcovitch, P. Thieberger, and F. Marti, “Plasma Window as Charge Stripper Complement”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 836-839.
- A. Puntambekar et al., “Experiences with the Manufacturing, Testing and Quality Control of Large Number of Superconducting Magnets”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper THC2MA02, pp. 567-569.
- V. Chohan, Z. Y. Guo, C. D. Johnson, and E. J. N. Wilson, “Antiproton Losses at Large Transverse Amplitudes in the CERN Antiproton Accumulator and Corrective Measures Using Skew Quadrupoles and Sextupoles”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2231-2234.
- F. F. Wu et al., “Preliminary Design and Calculation of Button BPM for the HALS Storage Ring”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4929-4931.
- T. Torims et al., “Evaluation of Geometrical Precision and Surface Roughness Quality for the Additively Manufactured Radio Frequency Quadrupole Prototype”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 787-791.
- R. Rossmanith, A. Geisler, A. Hobl, and M. Schillo, “A Superconducting Short Period Undulator”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TOPA006, pp. 233-235.
Back to search