Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] G. Franzini et al., “Final Design and Features of the B-train System of CNAO”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEB079, pp. 2878-2880.
[n] M. Bassetti, O. Ferrando, and F. Iazzourene, “ELETTRA Booster Synchrotron Lattice”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP5B13, pp. 631-633.
[n] A. Halavanau et al., “Generation of High Peak Power Hard X-Rays at LCLS-II with Double Bunch Self-seeding”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1863-1866. doi:10.18429/JACoW-IPAC2019-TUPRB088
[n] T. Shishido et al., “Test Results of the L-Band Superconducting Cavity made from Twice Melted Niobium”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper TUP022, pp. 246-248.
[n] Ju. Bylinsky, S. Esin, A. Feschenko, P. Ostroumov, and S. Zharylkapov, “Experiments Connected with Tuning of the Drift Tube Cavities Stabilized with Post Couplers”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper MO3-45, pp. 158-160.
[n] C. Hovater et al., “Operation of the CEBAF 100 MV Cryomodules”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 65-67. doi:10.18429/JACoW-LINAC2016-MOOP11
[n] I. Saleh, Y. S. Dabain, A. Ismail, and M. Mansouri Sharifabad, “Clients Development of SESAME's Control System based on CSS”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper WPO024, pp. 90-92.
[n] A. H. Jaffey, R. Benaroya, and T. K. Khoe, “A Hybrid Superconducting Solenoid as a Focusing Element in a Superconducting Heavy-Ion Accelerator”, in Proc. LINAC'76, Chalk River, Canada, Sep. 1976, paper B08, pp. 102-105.
[n] S. C. Joshi et al., “R&D Activities on High Intensity Superconducting Proton Linac at RRCAT”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper THPB003, pp. 843-845.
[n] K. W. Shepard, R. Benaroya, L. M. Bollinger, and C. H. Scheibelhut, “Split Ring Resonator for the Argonne Superconducting Heavy Ion Booster”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1147-1150.
[n] B. X. Yang et al., “Performance Test of the Next Generation X-Ray Beam Position Monitor System for the APS Upgrade”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 78-81. doi:10.18429/JACoW-IBIC2016-MOPG17
[n] X. D. Tu et al., “Beam Instability Induced by RF System of an FEL-THZ Source”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4298-4300. doi:10.18429/JACoW-IPAC2019-THPTS077
[n] F. Lenkszus et al., “Timing and Synchronization for the APS Short Pulse X-ray Project”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUOAB01, pp. 1077-1079.
[n] A. Halavanau et al., “Progress in High Power High Brightness Double Bunch Self-Seeding at LCLS-II”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 726-729. doi:10.18429/JACoW-FEL2019-THP071
[n] Y. Lu, G. Feng, T. Hu, J. Jiang, X. D. Tu, and Y. Q. Xiong, “Design of a Fully Automated Test Bench for Measuring the Field Distribution in Standing Wave Cavity”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 246-249. doi:10.18429/JACoW-LINAC2018-MOPO119
[n] M. Mansouri Sharifabad, A. Ismail, and I. Saleh, “Personnel Safety System in SESAME”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper WPO023, pp. 87-89.
[n] E. D. Matias, M. Benmerrouche, G. Cubbon, A. Hodges, and H. Zhang, “A Hazard Driven Approach to Accelerator Safety System Design - How CLS Successfully Applied ALARP in the Design of Safety Systems”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC040, pp. 172-174.
[n] R. Bachimanchi et al., “CEBAF SRF Performance during Initial 12 GeV Commissioning”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3638-3642. doi:10.18429/JACoW-IPAC2015-THXB1
[n] H. Li et al., “The Status of CSNS Front End”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 771-773. doi:10.18429/JACoW-LINAC2018-THPO039
[n] J. Aron et al., “Status Report on the ATLAS Superconducting Linear Accelerator”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper TUP0017, pp. 132-134.
[n] G. Guethlein, S. Sampayan, T. Houck, and J. McCarrick, “Faraday Cup Measurements of Ions Backstreaming into an Electron Beam Impinging on a Plasma Plume”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper TUB14, pp. 467-469.
[n] D. Gorelov et al., “Development of a Superconducting 500 MHz Multi-Spoke Cavity for Electron Linacs”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPC084, pp. 2408-2410.
[n] H. Park, S. U. De Silva, and J. R. Delayen, “Characteristics and Fabrication of a 499 MHz Superconducting Deflecting Cavity for the Jefferson Lab 12 GeV Upgrade”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPC101, pp. 2450-2452.
[n] L. J. Lagin et al., “The Overview of the National Ignition Facility Distributed Computer Control System”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper TUAP001, pp. XX-XX.
[n] S. Appel, W. Geithner, S. Reimann, M. Sapinski, R. Singh, and D. M. Vilsmeier, “Optimization of Heavy-Ion Synchrotrons Using Nature-Inspired Algorithms and Machine Learning”, in Proc. ICAP'18, Key West, Florida, USA, Oct. 2018, pp. 15-21. doi:10.18429/JACoW-ICAP2018-SAPAF02
[n] J. R. Noonan, J. Gagliano, G. A. Groeppner, R. A. Rosenberg, and D. R. Walters, “APS Storage Ring Vacuum System Performance”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8C003, pp. 3552-3555.
[n] O. Kugeler, W. Anders, J. Knobloch, and A. Neumann, “CW Adaptation of TESLA Technology in HoBiCaT”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEC004, pp. 2893-2895.
For LaTeX
Use Complete Form
For BibTeX
References
- G. Franzini et al., “Final Design and Features of the B-train System of CNAO”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEB079, pp. 2878-2880.
- M. Bassetti, O. Ferrando, and F. Iazzourene, “ELETTRA Booster Synchrotron Lattice”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP5B13, pp. 631-633.
- A. Halavanau et al., “Generation of High Peak Power Hard X-Rays at LCLS-II with Double Bunch Self-seeding”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1863-1866.
- T. Shishido et al., “Test Results of the L-Band Superconducting Cavity made from Twice Melted Niobium”, in Proc. 9th Int. Conf. RF Superconductivity (SRF'99), Santa Fe, NM, USA, Nov. 1999, paper TUP022, pp. 246-248.
- Ju. Bylinsky, S. Esin, A. Feschenko, P. Ostroumov, and S. Zharylkapov, “Experiments Connected with Tuning of the Drift Tube Cavities Stabilized with Post Couplers”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper MO3-45, pp. 158-160.
- C. Hovater et al., “Operation of the CEBAF 100 MV Cryomodules”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 65-67.
- I. Saleh, Y. S. Dabain, A. Ismail, and M. Mansouri Sharifabad, “Clients Development of SESAME's Control System based on CSS”, in Proc. 10th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'14), Karlsruhe, Germany, Oct. 2014, paper WPO024, pp. 90-92.
- A. H. Jaffey, R. Benaroya, and T. K. Khoe, “A Hybrid Superconducting Solenoid as a Focusing Element in a Superconducting Heavy-Ion Accelerator”, in Proc. 1976 Proton Linear Accelerator Conf. (LINAC'76), Chalk River, Canada, Sep. 1976, paper B08, pp. 102-105.
- S. C. Joshi et al., “R&D Activities on High Intensity Superconducting Proton Linac at RRCAT”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper THPB003, pp. 843-845.
- K. W. Shepard, R. Benaroya, L. M. Bollinger, and C. H. Scheibelhut, “Split Ring Resonator for the Argonne Superconducting Heavy Ion Booster”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1147-1150.
- B. X. Yang et al., “Performance Test of the Next Generation X-Ray Beam Position Monitor System for the APS Upgrade”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 78-81.
- X. D. Tu et al., “Beam Instability Induced by RF System of an FEL-THZ Source”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4298-4300.
- F. Lenkszus et al., “Timing and Synchronization for the APS Short Pulse X-ray Project”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUOAB01, pp. 1077-1079.
- A. Halavanau et al., “Progress in High Power High Brightness Double Bunch Self-Seeding at LCLS-II”, in Proc. 39th Int. Free Electron Laser Conf. (FEL'19), Hamburg, Germany, Aug. 2019, pp. 726-729.
- Y. Lu, G. Feng, T. Hu, J. Jiang, X. D. Tu, and Y. Q. Xiong, “Design of a Fully Automated Test Bench for Measuring the Field Distribution in Standing Wave Cavity”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 246-249.
- M. Mansouri Sharifabad, A. Ismail, and I. Saleh, “Personnel Safety System in SESAME”, in Proc. 10th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'14), Karlsruhe, Germany, Oct. 2014, paper WPO023, pp. 87-89.
- E. D. Matias, M. Benmerrouche, G. Cubbon, A. Hodges, and H. Zhang, “A Hazard Driven Approach to Accelerator Safety System Design - How CLS Successfully Applied ALARP in the Design of Safety Systems”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC040, pp. 172-174.
- R. Bachimanchi et al., “CEBAF SRF Performance during Initial 12 GeV Commissioning”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3638-3642.
- H. Li et al., “The Status of CSNS Front End”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 771-773.
- J. Aron et al., “Status Report on the ATLAS Superconducting Linear Accelerator”, in Proc. 1984 Linear Accelerator Conf. (LINAC'84), Seeheim, Germany, May 1984, paper TUP0017, pp. 132-134.
- G. Guethlein, S. Sampayan, T. Houck, and J. McCarrick, “Faraday Cup Measurements of Ions Backstreaming into an Electron Beam Impinging on a Plasma Plume”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper TUB14, pp. 467-469.
- D. Gorelov et al., “Development of a Superconducting 500 MHz Multi-Spoke Cavity for Electron Linacs”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPC084, pp. 2408-2410.
- H. Park, S. U. De Silva, and J. R. Delayen, “Characteristics and Fabrication of a 499 MHz Superconducting Deflecting Cavity for the Jefferson Lab 12 GeV Upgrade”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPC101, pp. 2450-2452.
- L. J. Lagin et al., “The Overview of the National Ignition Facility Distributed Computer Control System”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper TUAP001, pp. XX-XX.
- S. Appel, W. Geithner, S. Reimann, M. Sapinski, R. Singh, and D. M. Vilsmeier, “Optimization of Heavy-Ion Synchrotrons Using Nature-Inspired Algorithms and Machine Learning”, in Proc. 13th International Computational Accelerator Physics Conference (ICAP'18), Key West, Florida, USA, Oct. 2018, pp. 15-21.
- J. R. Noonan, J. Gagliano, G. A. Groeppner, R. A. Rosenberg, and D. R. Walters, “APS Storage Ring Vacuum System Performance”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 8C003, pp. 3552-3555.
- O. Kugeler, W. Anders, J. Knobloch, and A. Neumann, “CW Adaptation of TESLA Technology in HoBiCaT”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEC004, pp. 2893-2895.
Back to search