Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] E. Granados et al., “Mapping Charge Capture and Acceleration in a Plasma Wakefield of a Proton Bunch Using Variable Emittance Electron Beam Injection”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1780-1783. doi:10.18429/JACoW-IPAC2022-WEPOST039
[n] P. S. Martin, K. G. Meisner, and D. W. Wildman, “Improvements in Bunch Coalescing in the Fermilab Main Ring”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1827-1829.
[n] A. N. Ermakov, A. N. Kamanin, V. G. Sayapin, V. I. Shvedunov, D. S. Yurov, and I. V. Shvedunov, “Control Systems for Radiography and Cargo Inspection RF Accelerators”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper THPSC39, pp. 410-412.
[n] T. H. Chong et al., “Design study of HTS air-cored cyclotron coil system for medical RI production”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper TUPB050, unpublished.
[n] V. I. Maslov, I. N. Onishchenko, V. L. Stomin, and A. M. Yegorov, “Excitation of a Solitary Precursor of Wake-Field Type by Electron Beam”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP7A11, pp. 910-914.
[n] R. Paparella, G. Devanz, O. Napoly, M. Wendt, G. Kreps, and N. Baboi, “Preliminary Study on HOM-Based Beam Alignment in the TESLA Test Facility”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper MOP36, pp. 117-119.
[n] P. D. Gall, A. Goessel, V. Gubarev, and J. Iversen, “A Database for Superconducting Cavities”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper TUP02, pp. XX-XX.
[n] E. Sargsyan et al., “Linac4 Source and Low Energy Experience and Challenges”, in Proc. HB'23, Geneva, Switzerland, Oct. 2023, pp. 290-296. doi:10.18429/JACoW-HB2023-WEA4I2
[n] H. Liang et al., “PRELIMINARY MAGNETIC FIELD CALCULATION OF A 30-DEGREE DIPOLE MAGNET”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4204-4206. doi:10.18429/JACoW-IPAC2019-THPTS043
[n] J. Kuzminski, R. Bourque, G. Spalek, and C. Garcia, “Design of HOM Coupler Prototype for the APT Superconducting RF Cavities”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH132, pp. 1086-1088.
[n] Z. Zhou, “Conception design for high-resolution reconstruction of fault occurrence”, presented at the IPAC'23, Venice, Italy, May 2023, paper THPL023, unpublished.
[n] A. Pandey et al., “Operational Experience with the Mechanical Tuner Systems in the Superconducting Linac at IUAC”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 809. doi:10.18429/JACoW-SRF2021-THPCAV011
[n] M. Castellano, L. Catani, A. Cianchi, M. Geitz, G. Orlandi, and V. Verzilov, “Bunch Length Measurements at TTF using Coherent Diffraction Radiation”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP5B05, pp. 1699-1701.
[n] A. Moretti, T. Jurgens, Z. Qian, N. Holtkamp, and V. Wu, “RF Cavities for the Muon and Neutrino Factory Collaboration Study”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper THC18, pp. 896-898.
[n] Y. Yang et al., “Initial Beam Commissioning of LEAF at IMP”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 332-335. doi:10.18429/JACoW-LINAC2018-TUPO005
[n] B. Lindstr?Âm et al., “Settings for Improved Betatron Collimation in the First Run of the High Luminosity LHC”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1366-1369. doi:10.18429/JACoW-IPAC2022-TUPOTK062
[n] M. Baschke, N. Mueller, A. Schempp, and J. S. Schmidt, “New Development of a RFQ Beam Matching Section”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP213, pp. 1891-1893.
[n] J. P. Blewett, “Linacs of the Future”, in Proc. LINAC'66, Los Alamos, NM, USA, Oct. 1966, paper I-01, pp. 1-3.
[n] G. U. Behrsing, D. J. Clark, E. H. Hoyer, C. W. Leemann, F. Voelker, and R. B. Yourd, “Cyclotron Design Studies for a Medical Ion Accelerator”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper C-05, pp. 2061-2064.
[n] F. Naito et al., “Development of the 50-MeV DTL for the JAERI/KEK Joint Project”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper TUD08, pp. 563-565.
[n] N. P. Sobenin, A. I. Karev, V. N. Melekhin, V. I. Shvedunov, and W. P. Trower, “Design of a Compact 70 MeV Multi-Purpose Pulsed Race-Track Micotron”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 512-515.
[n] D. R. Chow et al., “Simulating Enhanced Focusing Effects of Ion Motion in Adiabatic Plasmas”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1798-1801. doi:10.18429/JACoW-IPAC2022-WEPOST045
[n] H. Brand et al., “The PHELIX Control System Based on UML Design Level Programming in LabVIEW”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WP549, pp. XX-XX.
[n] V. I. Maslov, I. N. Onishchenko, V. L. Stomin, and A. M. Yegorov, “Influence of Ion Mobility on Pierce Instability Development During Compensated Ion Beam Transport”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP6A16, pp. 1150-1151.
[n] J. Zhang et al., “Temporal Characterization of Electron Bunches From Self-Injection and Ionization Injection in a Laser Wakefield Accelerator”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3693-3696. doi:10.18429/JACoW-IPAC2019-THPGW048
[n] G. N. Kontogiorgos, A. Y. Horita, L. Martins dos Santos, M. A. L. Moraes, and L. F. Segalla, “The Mirror Systems Benches Kinematics Development for Sirius/LNLS”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 358-361. doi:10.18429/JACoW-ICALEPCS2021-TUPV001
[n] F. Donoso, E. Bründermann, M. Frank, S. Funkner, A.-S. Mueller, and M. Reissig, “Extended phase space tomography for EOSD simulation considering crystal geometry effects”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper THPM063, unpublished.
[n] V. Wu et al., “Antiproton Acceleration in the Fermilab Main Injector Using 2.5 MHz (H=28) and 53 MHz (H=588) RF Systems”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPB073, pp. 1769-1771.
[n] J. Kuzminski, K. C. D. Chan, R. Gentzlinger, and F. Smith, “Fabrication of a Prototype Medium-Beta, 700 MHz APT Superconducting RF Cavity with Industry”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOP129, pp. 968-970.
[n] K. C. Liao et al., “Second Sound Measurement for SPL Cavity Diagnostics”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper THPO026, pp. 767-772.
[n] H. C. Hseuh et al., “Performance of RHIC Vacuum Systems”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH033, pp. 2156-2158.
[n] A. Mosnier, F. Orsini, and B. Phung, “Analysis of the Heavily Beam-loaded SOLEIL RF System”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP28G, pp. 1720-1722.
[n] S. X. Peng et al., “Status of the High Current Permanent Magnet 2.45 GHz ECR Ion Source at Peking University”, in Proc. ECRIS'10, Grenoble, France, Aug. 2010, paper TUCOCK02, pp. 102-104.
[n] T. Shishido, K. Akai, E. Kako, K. Kubo, and S. Noguchi, “Operating Status of the TRISTAN Superconducting RF System”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 57-60.
[n] V. Mironov, J. P. M. Beijers, S. Brandenburg, H. R. Kremers, J. Mulder, and S. Saminathan, “ECR Ion Source Development at the AGOR Facility”, in Proc. Cyclotrons'10, Lanzhou, China, Sep. 2010, paper MOPCP053, pp. 156-158.
[n] L. Walling, D. Neuffer, and G. Spalek, “Transmission-Line Impedance Measurements of Beam Pipes for an Advanced Hadron Faciliity”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1164-1167.
[n] J. M. Dickson, K. Batchelor, D. J. Warner, and A. Carne, “The Rutherford PLA and a Linac for the High Energy Accelerator Design Study”, in Proc. LINAC'63, New Heaven, CT, USA, Oct. 1963, paper 12-02, pp. 404-420.
[n] A. Ropert, P. Elleaume, L. Farvacque, Y. Papaphilippou, and T. Perron, “Prospects for Long-term Lattice Upgrade at the ESRF”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPKF033, pp. 2344-2346.
[n] A. Carne, “R.F. Accelerating Structures: The Cross-Bar Structure”, in Proc. LINAC'64, Madison, WI, USA, Jul. 1964, paper PART1-1, pp. 1-20.
[n] M. P. Donadio, F. P. Figueiredo, J. R. Piton, and H. D. de Almeida, “The Sirius Motion Control Report”, in Proc. PCaPAC'16, Campinas, Brazil, Oct. 2016, pp. XX-XX. doi:10.18429/JACoW-PCAPAC2016-WECSPLIO01
[n] M. A. C. Hotchkis and D. Button, “Mass Spectrometry with an ECR Ion Source”, in Proc. ECRIS'10, Grenoble, France, Aug. 2010, paper TUCOCK04, pp. 109-110.
[n] A. N. Ermakov et al., “Linacs for Industry, Cargo Inspection and Medicine Designed by Moscow University”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 130-132. doi:10.18429/JACoW-LINAC2018-MOPO060
[n] A. Carne, “Crossbar and Cloverleaf Structures at Rutherford”, in Proc. LINAC'63, New Heaven, CT, USA, Oct. 1963, paper 4-01, pp. 104-130.
[n] Ph. Bernard et al., “Superconducting Hydroformed Niobium Sputter Coated Copper Cavities at 1.5 GHz”, in Proc. SRF'93, Newport News, VA, USA, Oct. 1993, paper SRF93I21, pp. XX-XX.
[n] Y. F. Liu et al., “Design a Precise Stability Controller for High Power Pulse Modulator Based on FPGA”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3900-3903. doi:10.18429/JACoW-IPAC2019-THPRB041
[n] M. Yadav et al., “Radiation Diagnostics for AWA and FACET-II Flat Beams in Plasma”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1791-1794. doi:10.18429/JACoW-IPAC2022-WEPOST042
[n] F. C. Pilat, “SNS Upgrade and Power Ramp Up”, presented at the HB'23, Geneva, Switzerland, Oct. 2023, paper THC1I1, unpublished.
[n] S. M. White et al., “A Flexible Injection Scheme for the ESRF-EBS”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 421-424. doi:10.18429/JACoW-IPAC2021-MOPAB116
[n] M. A. Plum, R. W. Garnett, R. Meyer, Sr., and R. E. Shafer, “Diagnostics Plate for SNS Linac Commissioning”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH124, pp. 2374-2376.
[n] S. Berry, A. Bouygues, J. Drant, A. Gonzalez-Moreau, C. Madec, and C. Servouin, “Cobotisation of ESS Cryomodule Assembly at CEA”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 438-441. doi:10.18429/JACoW-SRF2023-TUPTB024
[n] E. Willen et al., “Magnetic Properties of ISABELLE Superconducting Quadrupoles”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3300-3303.
[n] D. Trbojevic, S. Childress, C. Crawford, and D. Tinsley, “Improvement of the High Voltage Properties of the Fermilab Electrostatic Septa”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3074-3077.
For LaTeX
Use Complete Form
For BibTeX
References
- E. Granados et al., “Mapping Charge Capture and Acceleration in a Plasma Wakefield of a Proton Bunch Using Variable Emittance Electron Beam Injection”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1780-1783.
- P. S. Martin, K. G. Meisner, and D. W. Wildman, “Improvements in Bunch Coalescing in the Fermilab Main Ring”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1827-1829.
- A. N. Ermakov, A. N. Kamanin, V. G. Sayapin, V. I. Shvedunov, D. S. Yurov, and I. V. Shvedunov, “Control Systems for Radiography and Cargo Inspection RF Accelerators”, in Proc. 24th Russian Particle Accelerator Conf. (RuPAC'14), Obninsk, Russia, Oct. 2014, paper THPSC39, pp. 410-412.
- T. H. Chong et al., “Design study of HTS air-cored cyclotron coil system for medical RI production”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPB050, this conference.
- V. I. Maslov, I. N. Onishchenko, V. L. Stomin, and A. M. Yegorov, “Excitation of a Solitary Precursor of Wake-Field Type by Electron Beam”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP7A11, pp. 910-914.
- R. Paparella, G. Devanz, O. Napoly, M. Wendt, G. Kreps, and N. Baboi, “Preliminary Study on HOM-Based Beam Alignment in the TESLA Test Facility”, in Proc. 22nd Linear Accelerator Conf. (LINAC'04), Lübeck, Germany, Aug. 2004, paper MOP36, pp. 117-119.
- P. D. Gall, A. Goessel, V. Gubarev, and J. Iversen, “A Database for Superconducting Cavities”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper TUP02, pp. XX-XX.
- E. Sargsyan et al., “Linac4 Source and Low Energy Experience and Challenges”, in Proc. HB'23 (HB), Geneva, Switzerland, Oct. 2023, paper WEA4I2, pp. 290-296.
- H. Liang et al., “PRELIMINARY MAGNETIC FIELD CALCULATION OF A 30-DEGREE DIPOLE MAGNET”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4204-4206.
- J. Kuzminski, R. Bourque, G. Spalek, and C. Garcia, “Design of HOM Coupler Prototype for the APT Superconducting RF Cavities”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH132, pp. 1086-1088.
- Z. Zhou, “Conception design for high-resolution reconstruction of fault occurrence”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPL023, unpublished.
- A. Pandey et al., “Operational Experience with the Mechanical Tuner Systems in the Superconducting Linac at IUAC”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 809.
- M. Castellano, L. Catani, A. Cianchi, M. Geitz, G. Orlandi, and V. Verzilov, “Bunch Length Measurements at TTF using Coherent Diffraction Radiation”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP5B05, pp. 1699-1701.
- A. Moretti, T. Jurgens, Z. Qian, N. Holtkamp, and V. Wu, “RF Cavities for the Muon and Neutrino Factory Collaboration Study”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper THC18, pp. 896-898.
- Y. Yang et al., “Initial Beam Commissioning of LEAF at IMP”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 332-335.
- B. Lindstr?Âm et al., “Settings for Improved Betatron Collimation in the First Run of the High Luminosity LHC”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1366-1369.
- M. Baschke, N. Mueller, A. Schempp, and J. S. Schmidt, “New Development of a RFQ Beam Matching Section”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP213, pp. 1891-1893.
- J. P. Blewett, “Linacs of the Future”, in Proc. 1966 Linear Accelerator Conf. (LINAC'66), Los Alamos, NM, USA, Oct. 1966, paper I-01, pp. 1-3.
- G. U. Behrsing, D. J. Clark, E. H. Hoyer, C. W. Leemann, F. Voelker, and R. B. Yourd, “Cyclotron Design Studies for a Medical Ion Accelerator”, in Proc. 8th Int. Cyclotron Conf. and Their Applications (Cyclotrons'78), Bloomington, IN, USA, Sep. 1978, paper C-05, pp. 2061-2064.
- F. Naito et al., “Development of the 50-MeV DTL for the JAERI/KEK Joint Project”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper TUD08, pp. 563-565.
- N. P. Sobenin, A. I. Karev, V. N. Melekhin, V. I. Shvedunov, and W. P. Trower, “Design of a Compact 70 MeV Multi-Purpose Pulsed Race-Track Micotron”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 512-515.
- D. R. Chow et al., “Simulating Enhanced Focusing Effects of Ion Motion in Adiabatic Plasmas”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1798-1801.
- H. Brand et al., “The PHELIX Control System Based on UML Design Level Programming in LabVIEW”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper WP549, pp. XX-XX.
- V. I. Maslov, I. N. Onishchenko, V. L. Stomin, and A. M. Yegorov, “Influence of Ion Mobility on Pierce Instability Development During Compensated Ion Beam Transport”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP6A16, pp. 1150-1151.
- J. Zhang et al., “Temporal Characterization of Electron Bunches From Self-Injection and Ionization Injection in a Laser Wakefield Accelerator”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3693-3696.
- G. N. Kontogiorgos, A. Y. Horita, L. Martins dos Santos, M. A. L. Moraes, and L. F. Segalla, “The Mirror Systems Benches Kinematics Development for Sirius/LNLS”, in Proc. 18th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'21), Shanghai, China, Oct. 2021, pp. 358-361.
- F. Donoso, E. Bründermann, M. Frank, S. Funkner, A.-S. Mueller, and M. Reissig, “Extended phase space tomography for EOSD simulation considering crystal geometry effects”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPM063, this conference.
- V. Wu et al., “Antiproton Acceleration in the Fermilab Main Injector Using 2.5 MHz (H=28) and 53 MHz (H=588) RF Systems”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPPB073, pp. 1769-1771.
- J. Kuzminski, K. C. D. Chan, R. Gentzlinger, and F. Smith, “Fabrication of a Prototype Medium-Beta, 700 MHz APT Superconducting RF Cavity with Industry”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper MOP129, pp. 968-970.
- K. C. Liao et al., “Second Sound Measurement for SPL Cavity Diagnostics”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper THPO026, pp. 767-772.
- H. C. Hseuh et al., “Performance of RHIC Vacuum Systems”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH033, pp. 2156-2158.
- A. Mosnier, F. Orsini, and B. Phung, “Analysis of the Heavily Beam-loaded SOLEIL RF System”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP28G, pp. 1720-1722.
- S. X. Peng et al., “Status of the High Current Permanent Magnet 2.45 GHz ECR Ion Source at Peking University”, in Proc. 19th Int. Workshop on ECR Ion Sources (ECRIS'10), Grenoble, France, Aug. 2010, paper TUCOCK02, pp. 102-104.
- T. Shishido, K. Akai, E. Kako, K. Kubo, and S. Noguchi, “Operating Status of the TRISTAN Superconducting RF System”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 57-60.
- V. Mironov, J. P. M. Beijers, S. Brandenburg, H. R. Kremers, J. Mulder, and S. Saminathan, “ECR Ion Source Development at the AGOR Facility”, in Proc. 19th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'10), Lanzhou, China, Sep. 2010, paper MOPCP053, pp. 156-158.
- L. Walling, D. Neuffer, and G. Spalek, “Transmission-Line Impedance Measurements of Beam Pipes for an Advanced Hadron Faciliity”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1164-1167.
- J. M. Dickson, K. Batchelor, D. J. Warner, and A. Carne, “The Rutherford PLA and a Linac for the High Energy Accelerator Design Study”, in Proc. 1963 Conf. on Proton Linear Accelerators (LINAC'63), New Heaven, CT, USA, Oct. 1963, paper 12-02, pp. 404-420.
- A. Ropert, P. Elleaume, L. Farvacque, Y. Papaphilippou, and T. Perron, “Prospects for Long-term Lattice Upgrade at the ESRF”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPKF033, pp. 2344-2346.
- A. Carne, “R.F. Accelerating Structures: The Cross-Bar Structure”, in Proc. 1964 Linear Accelerator Conf. (LINAC'64), Madison, WI, USA, Jul. 1964, paper PART1-1, pp. 1-20.
- M. P. Donadio, F. P. Figueiredo, J. R. Piton, and H. D. de Almeida, “The Sirius Motion Control Report”, in Proc. 11th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'16), Campinas, Brazil, Oct. 2016, pp. XX-XX.
- M. A. C. Hotchkis and D. Button, “Mass Spectrometry with an ECR Ion Source”, in Proc. 19th Int. Workshop on ECR Ion Sources (ECRIS'10), Grenoble, France, Aug. 2010, paper TUCOCK04, pp. 109-110.
- A. N. Ermakov et al., “Linacs for Industry, Cargo Inspection and Medicine Designed by Moscow University”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 130-132.
- A. Carne, “Crossbar and Cloverleaf Structures at Rutherford”, in Proc. 1963 Conf. on Proton Linear Accelerators (LINAC'63), New Heaven, CT, USA, Oct. 1963, paper 4-01, pp. 104-130.
- Ph. Bernard et al., “Superconducting Hydroformed Niobium Sputter Coated Copper Cavities at 1.5 GHz”, in Proc. 6th Int. Conf. RF Superconductivity (SRF'93), Newport News, VA, USA, Oct. 1993, paper SRF93I21, pp. XX-XX.
- Y. F. Liu et al., “Design a Precise Stability Controller for High Power Pulse Modulator Based on FPGA”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3900-3903.
- M. Yadav et al., “Radiation Diagnostics for AWA and FACET-II Flat Beams in Plasma”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1791-1794.
- F. C. Pilat, “SNS Upgrade and Power Ramp Up”, presented at the HB'23 (HB), Geneva, Switzerland, Oct. 2023, paper THC1I1, unpublished.
- S. M. White et al., “A Flexible Injection Scheme for the ESRF-EBS”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 421-424.
- M. A. Plum, R. W. Garnett, R. Meyer, Sr., and R. E. Shafer, “Diagnostics Plate for SNS Linac Commissioning”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH124, pp. 2374-2376.
- S. Berry, A. Bouygues, J. Drant, A. Gonzalez-Moreau, C. Madec, and C. Servouin, “Cobotisation of ESS Cryomodule Assembly at CEA”, in Proc. 21th Int. Conf. RF Superconductivity (SRF'23), Grand Rapids, MI, USA, Jun. 2023, paper TUPTB024, pp. 438-441.
- E. Willen et al., “Magnetic Properties of ISABELLE Superconducting Quadrupoles”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3300-3303.
- D. Trbojevic, S. Childress, C. Crawford, and D. Tinsley, “Improvement of the High Voltage Properties of the Fermilab Electrostatic Septa”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3074-3077.
Back to search