JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	Y. Zhang et al., “Simulation and Initial Test Result of the SNS Ring RF System”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMS081, pp. 2520-2522. 
[n]	S. Kashiwagi et al., “Development of a Photocathode RF Gun for an L-Band Electron Linac”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper TUPC20, pp. 289-292. 
[n]	C. Colldelram, J. Nicolas, and C. Ruget, “Stabilization Methods for Force Actuators and Flexure Hinges”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. XX-XX. doi:10.18429/JACoW-MEDSI2016-MOPE01
[n]	C. Carli and M. Martini, “Blow-Up Due to Intra Beam Scattering during Deceleration in ELENA”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4303-4306. doi:10.18429/JACoW-IPAC2017-THPIK093
[n]	G. H. Trilling, “Invited Paper- Impact of Storage Rings on Elementary Particle Physics”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 4252-4258. 
[n]	A. Lennox, “A Hospital-Based Proton Linac for Neutron Therapy and Radioisotope Production”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper MO3-18, pp. 86-87. 
[n]	Z. Xue, J. P. Dai, and C. Meng, “A New Fault Recovery Mechanism for Superconducting Cavity Failure in C-ADS”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 158-160. doi:10.18429/JACoW-IPAC2016-MOPMB032
[n]	Y. Lee, P.-A. Duperrex, D. C. Kiselev, and U. Muller, “A Simulation Based Thermal Analysis of a New Current Monitor at the PSI Proton Accelerator”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6REP014, pp. 3979-3981. 
[n]	F. Hinode et al., “Status of the 1.3 GeV Booster Synchrotron for Generating High Energy Gamma Rays at Tohoku University”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 701-703. doi:10.18429/JACoW-IPAC2016-MOPOW001
[n]	P. K. Saha, “Experience with J-PARC RCS Injection and Extraction Systems”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper WGC05, pp. 275-283. 
[n]	I. D. Kaganovich, R. C. Davidson, and E. A. Startsev, “Ionization Cross-Sections in Ion-Atom Collisions for High Energy Ion Beams”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPB023, pp. 1667-1669. 
[n]	K. Gross and D. E. M. Lens, “Modeling Longitudinal Bunched Beam Dynamics in Hadron Synchrotrons using Scaled Fourier-Hermite Expansions”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPEA010, pp. 2513-2515. 
[n]	S. Mey and R. Gebel, “Towards an RF Wien-Filter for EDM Experiments at COSY”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3761-3763. doi:10.18429/JACoW-IPAC2015-THPF031
[n]	Y. Cho et al., “A 1- to 5-MW, RCS-Based, Short-Pulse Spallation Neutron Source”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8B011, pp. 953-955. 
[n]	Y. Tsuzuki et al., “Polarimetry of Hard X-Rays from Highly Charged Ions Using a Si/CdTe Compton Camera”, presented at the EBIST2022, Whistler, BC, Canada, Jun. 2022, paper FR3WH01, unpublished. 
[n]	A. Krasnykh, V. Ivanov, A. Jensen, and G. Scheitrum, “An Improved Version of TOPAZ 3D”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper FPAB012, pp. 3315-3317. 
[n]	D. Jacquet et al., “The LHC run 2022”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 551-554. doi:10.18429/JACoW-IPAC2023-MOPL020
[n]	L. Giannessi et al., “Status of the Seeding Experiment at SPARC”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper MOPP014, pp. XX-XX. 
[n]	H. G. Koenig and S. Schaefer, “Reduction of Q-loss-effects in Ferrite-loaded Cavities”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP094, pp. 772-774. 
[n]	B. Qin, D. Chen, M. Fan, X. Jian, Y. Xiong, and T. Yu, “A Framework Design for a Cyclotron Virtual Control Platform Based on Object-Oriented Methodology”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper FPAG019, pp. 3506-3508. 
[n]	S. Varnasseri, I. Arredondo, D. Belver, P. Echevarria, and M. Eguiraun, “Test Bench Experiments for Energy Measurement and Beam Loss of ESS-Bilbao”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper WEPF26, pp. 876-878. 
[n]	J. Neilson, L. Ives, and S. G. Tantawi, “Design and Test of a 100MW X-Band TE01 Window”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAE020, pp. 1125-1126. 
[n]	L. Huang, Y. Li, R. H. Liu, Y. D. Liu, S. Wang, and O. Xiao, “The Status of Coupling Impedance Measurement for the CSNS/RCS Extraction Kicker Prototype”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPWA014, pp. 1754-1756. 
[n]	R. Byrns, H. He, and W.-D. M?Âller, “Cryogenic Distribution System ( CDS ) for Eight HERA Superconducting RF Cavity Cryostats”, in Proc. SRF'91, Hamburg, Germany, Aug. 1991, paper SRF91E20, pp. XX-XX. 
[n]	A. Garonna et al., “Status of Proton Beam Commissioning of the MedAustron Particle Therapy Accelerator”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3176-3179. doi:10.18429/JACoW-IPAC2016-THOAB01
[n]	Y. Jongen et al., “Status Report on the Catholic University of Louvain Cyclotron”, in Proc. Cyclotrons'72, Vancouver, Canada, Jul. 1972, pp. 110-114. 
[n]	M. Quispe et al., “Study, Design and Optimization Analysis of the ALBA LOREA Dipole Vacuum Chamber and Crotch Absorbers Based on Finite Element Analysis”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 191-193. doi:10.18429/JACoW-MEDSI2016-TUPE14
[n]	F. A. Akeroyd et al., “IBEX - the New EPICS Based Instrument Control System at the ISIS Pulsed Neutron and Muon Source”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 205-208. doi:10.18429/JACoW-ICALEPCS2015-MOPGF048
[n]	P. E. Dirksen, M. Lenckowski, W. R. Rawnsley, M. Rowe, and V. A. Verzilov, “A Fast Wire Scanner for the TRIUMF Electron Linac”, in Proc. IBIC'17, Grand Rapids, MI, USA, Aug. 2017, pp. 401-403. doi:10.18429/JACoW-IBIC2017-WEPCC19
[n]	H. Takahashi, Y. An, X. Chen, and M. Nomura, “Optimization of the Target for Muon Colliders”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4W027, pp. 402-404. 
[n]	J. J. Bicek, P. J. Billquist, and J. L. Yntema, “Telemetry Component Tests in the FN Tandem Terminal”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1182-1184. 
[n]	R. B. Nussbaumer et al., “ARIEL Control System at TRIUMF ÔÇô Project Update”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC094, pp. 318-320. 
[n]	P. Ausset, J. M. Lagniel, P. Le Boulicaut, P. Mattei, and D. Uriot, “Low Intensity Beam Charge Measurement of the 1 GeV/amu SATURNE II Extracted Beam”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1728-1731. 
[n]	A. V. Galchuk, L. E. Korolev, B. N. Tronov, D. V. Efremov, and M. N. H. Comsan, “External Beam Possibilities for the MGC-20 Cyclotron Project in Egypt”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper J-06, pp. 681-683. 
[n]	A. Romanenko, G. Eremeev, D. Meidlinger, and H. Padamsee, “Studies of the high field anomalous losses in small and large grain niobium cavities”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper TUP24, pp. XX-XX. 
[n]	A. Donateo, V. Nassisi, and G. Raganato, “Electron Emission from a Niobium Photocathode”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP1B07, pp. 2364-2366. 
[n]	J. Preble et al., “SNS Cryomodule Performance”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper ROAA001, pp. 457-461. 
[n]	R. I. Farnsworth, “Motion Controls Using EPICS and Galil Controllers”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEP056, pp. XX-XX. 
[n]	B. Yan, “Post-linac beam collimation study at the beam distribution section of SHINE”, presented at the IPAC'23, Venice, Italy, May 2023, paper WEPL064, unpublished. 
[n]	N. N. Alexeev et al., “Maintenance of ITEP-TWAC Facility Operation and Machine Capabilities Development”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper TUCHZ02, pp. 32-34. 
[n]	K. Gross and J. Adamy, “Comparison of LLRF Control Approaches for High Intensity Hadron Synchrotrons: Design and Performance”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPC076, pp. 3464-3466. 
[n]	A. L. Gabard, J. P. Duppich, and D. George, “Radiation Hard Magnets at the Paul Scherrer Institute”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPD011, pp. 3518-3520. 
[n]	S. Simrock et al., “Demonstration of an ATCA Based LLRF Control System at FLASH”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEB006, pp. 388-390. 
[n]	B. T. Loseth, M. Berz, K. Makino, P. Snopok, and H. Zhang, “Space Charge Simulation in COSY using The Fast Multipole Method”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 460-462. doi:10.18429/JACoW-IPAC2014-MOPME038
[n]	G. K. Brunton et al., “Status of the National Ignition Facility (NIF) Integrated Computer Control and Information Systems”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 14-18. doi:10.18429/JACoW-ICALEPCS2017-MOAPL03
[n]	Y. Xie, G. H. Hoffstaetter, and M. Liepe, “Quench and High Field Q-SLOP Studies using a Single Cell Cavity with Artificial Pits”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWO071, pp. 2465-2467. 
[n]	G. Caryotakis, E. Jongewaard, C. Pearson, R. M. Phillips, D. Sprehn, and A. Vlieks, “The Next Linear Collider Klystron Development Program”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP3A06, pp. 2063-2065. 
[n]	E. Tojyo, S. Arai, T. Fujino, T. Fukushima, N. Tokuda, and T. Hattori, “A Multi-Module Cavity Structure of Split Coaxial RFQ”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper WE3-49, pp. 374-376. 
[n]	V. A. Verzilov, R. E. Laxdal, M. Marchetto, and W. R. Rawnsley, “Time Domain Diagnostics for the ISAC-II Superconducting Heavy Ion Linac”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper WEPB07, pp. 247-249. 
[n]	Z. F. Zhao et al., “Comparison of Two Types of Steerers Applied in Proton Therapy Gantry”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 488-490. doi:10.18429/JACoW-IPAC2018-MOPML039
[n]	R. D?Âlling, “Progress with Bunch-shape Measurements at PSI's High-power Cyclotrons and Proton Beam Lines”, in Proc. HB'12, Beijing, China, Sep. 2012, paper MOP253, pp. 187-191. 
[n]	T. W. Hardek et al., “Status of the Spallation Neutron Source Radio Frequency Systems”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP091, pp. 1045-1047. 
[n]	S. Di Mitri et al., “Beam Physics Highlights of the FERMI@ELETTRA Project”, in Proc. FLS'06, Hamburg, Germany, May 2006, paper WG313, pp. XX-XX. 
[n]	Y. Tao et al., “The Cost Optimization Studies of the Superconducting Linac”, in Proc. HIAT'15, Yokohama, Japan, Sep. 2015, paper WEPB15, pp. 225-227. 
[n]	M. Fan, D. Chen, Y. Xiong, and T. Yu, “Applying Virtual Prototyping to the Innovative Design of Low Energy Accelerators”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPE008, pp. 1560-1562. 
[n]	M. T. Heron, Y. S. Chernousko, P. Hamadyk, S. C. Lay, and N. Rotolo, “The Diamond Machine Protection System”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMU003, pp. 1051-1054. 
[n]	J. D. Jarvis et al., “Development of Diamond Field-Emitter Arrays for Free-Electron Lasers”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper THAAU04, pp. 477-480. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search