Favourites
For Word
[n] M. Brosi, A. Andersson, J. Breunlin, F. Cullinan, and P. Tavares, “Time-resolved measurement and simulation of a longitudinal single-bunch instability at the MAX IV 3 GeV ring”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2685-2688. doi:10.18429/JACoW-IPAC2023-WEPA020
[n] P. H. Williams, G. J. Hirst, B. D. Muratori, H. L. Owen, and S. L. Smith, “Electron Beam Dynamics in 4GLS”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPMN083, pp. 1103-1105.
[n] A. Pisent, “European collaboration for the realization of ESS”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 5199-5204. doi:10.18429/JACoW-IPAC2023-FRYG1
[n] Y. Yuan, J. Wang, J. Yang, K. Fan, and Z. Liu, “Russian quadruplet based electron optics for ultrafast electron microscopy”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3582-3585. doi:10.18429/JACoW-IPAC2023-WEPL193
[n] J. X. Chen et al., “Application of Remote Installation and Measurement Smart Vehicle in Accelerator”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 217-219. doi:10.18429/JACoW-MEDSI2018-WEPH08
[n] M. Campbell, “Timepix and Medipix detectors and their applications”, presented at the IPAC'23, Venice, Italy, May 2023, paper FRXG2, unpublished.
[n] A. Gora, M. Abo-Bakr, M. Dirsat, G. Rehm, and M. Ries, “Beam-based characterization of a non-linear injection kicker at BESSY II”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1156-1158. doi:10.18429/JACoW-IPAC2023-MOPM075
[n] C. Matejcek, “5 MeV Beam Transport System for MESA”, presented at the IPAC'23, Venice, Italy, May 2023, paper MOPA020, unpublished.
[n] A. Gonz?ílez Romero, J. J. Casas, C. Colldelram, and M. Quispe, “CFD Predictions of Water Flow Through Impellers of the ALBA Centrifugal Pumps and Their Aspiration Zone. An Investigation of Fluid Dynamics Effects on Cavitation Problems”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 299. doi:10.18429/JACoW-MEDSI2020-WEPB16
[n] J. Wang, G. Hoffstaetter, and D. Sagan, “Beam-based alignment of individual members of sextupole families”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4036-4039. doi:10.18429/JACoW-IPAC2023-THPA038
[n] M. Champion et al., “Overview of the Spallation Neutron Source Linac Low-Level RF Control System”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAT057, pp. 3396-3398.
[n] H. P. Hsueh, C.-H. Chang, J.-R. Chen, G.-Y. Hsiung, C.-K. Kuan, and T.-S. Ueng, “Optimization for Taiwan Photon Source Electron Beam Position Monitors through Numerical Simulation”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS065, pp. 3436-3438.
[n] Y. Cai, M. Furman, and M. Pivi, “Buildup of Electron Cloud with Different Bunch Pattern in the Presence of Solenoid Field”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WOAA004, pp. 350-352.
[n] J.-C. Chang, J.-R. Chen, Y.-C. Lin, Y.-H. Liu, and Z.-D. Tsai, “Design of the Utility System for the 3 GeV TPS Electron Storage Ring”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS137, pp. 1828-1830.
[n] Y. Wang et al., “Experimental Study of Stainless Steel Vacuum Chamber with TiN Film Coating”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6RFP023, pp. 401-403.
[n] M. Zisman, “R&D Toward Neutrino Factories and Muon Colliders”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WOAA007, pp. 361-365.
[n] R. Bodenstein et al., “Current status of conceptual horizontal splitter design for FFA@CEBAF energy Upgrade”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 810-813. doi:10.18429/JACoW-IPAC2025-MOPS126
[n] G.-Y. Hsiung, C. K. Chan, C.-H. Chang, J.-R. Chen, H. P. Hsueh, and T. L. Yang, “Design Concept of the Vacuum System for the 3 GeV Taiwan Photon Source”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS064, pp. 3433-3435.
[n] J. C. Calvo, A. Ibarra, A. Salom, M. A. Patricio, and M. L. Rivers, “IFMIF LLRF Control System Architecture Based on Epics”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPMS009, pp. 339-342.
[n] M. Borland, H. Cease, and J. C. Dooling, “Use of Solid Xenon as a Beam Dump Material for 4th-Generation Storage Rings”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 927-930. doi:10.18429/JACoW-NAPAC2019-THYBA3
[n] C. Wang, J. L. Hirshfield, and V. P. Yakovlev, “Multicavity Proton Cyclotron Accelerator”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPG056, pp. 1927-1929.
[n] C. K. Chan et al., “Design of the TPS Injection System”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6RFP040, pp. 1632-1634.
[n] C. N. Booth, P. Hodgson, R. Nicholson, and P. J. Smith, “MICE Target Operation & Monitoring”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6RFP040, pp. 2881-2883.
[n] Y.-H. Liu, C. K. Chan, C.-H. Chang, J.-R. Chen, K. C. Kuo, and C.-S. Yang, “The EMI Reduction of Pulsed Magnets in NSRRC”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6RFP014, pp. 1559-1561.
[n] Y.-H. Liu, J.-C. Chang, J.-R. Chen, and Y.-C. Lin, “Analysis and Reduction Electromagnetic Interference to ICTs Caused by Pulsed Power Supply Excitation in NSRRC”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH187, pp. 3239-3241.
[n] J. Tang, L. Liu, J. Qiu, G. H. Wei, J. Wei, and C. Zhang, “Beam Preparation for the Injection into CSNS RCS”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper WGC12, pp. 320-325.
[n] L. Liu and P. F. Tavares, “Orbit Stability at the Brazilian Synchrotron Light Source”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPE041, pp. 2687-2689.
[n] C. Nieter and J. R. Cary, “VORPAL: A Computational Tool for the Study of Advanced Accelerator Concepts”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPG052, pp. 1918-1920.
[n] F. Eozenou, C. Z. Antoine, A. Aspart, S. Berry, J. F. Denis, and B. Malki, “Efficiency of Electropolishing versus Bath Composition and Aging: First Results”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper THP02, pp. 451-454.
[n] C. N. Booth et al., “Design and Operational Experience of the MICE Target”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP110, pp. 2764-2766.
[n] A. B. da Cruz and L. Liu, “Electron Beam Scanning in the Delta-Type Undulators for Sirius”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1300-1303. doi:10.18429/JACoW-IPAC2018-TUPMF022
For LaTeX
Use Complete Form
For BibTeX
References
- M. Brosi, A. Andersson, J. Breunlin, F. Cullinan, and P. Tavares, “Time-resolved measurement and simulation of a longitudinal single-bunch instability at the MAX IV 3 GeV ring”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA020, pp. 2685-2688.
- P. H. Williams, G. J. Hirst, B. D. Muratori, H. L. Owen, and S. L. Smith, “Electron Beam Dynamics in 4GLS”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPMN083, pp. 1103-1105.
- A. Pisent, “European collaboration for the realization of ESS”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper FRYG1, pp. 5199-5204.
- Y. Yuan, J. Wang, J. Yang, K. Fan, and Z. Liu, “Russian quadruplet based electron optics for ultrafast electron microscopy”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPL193, pp. 3582-3585.
- J. X. Chen et al., “Application of Remote Installation and Measurement Smart Vehicle in Accelerator”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 217-219.
- M. Campbell, “Timepix and Medipix detectors and their applications”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper FRXG2, unpublished.
- A. Gora, M. Abo-Bakr, M. Dirsat, G. Rehm, and M. Ries, “Beam-based characterization of a non-linear injection kicker at BESSY II”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPM075, pp. 1156-1158.
- C. Matejcek, “5 MeV Beam Transport System for MESA”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPA020, unpublished.
- A. Gonz?ílez Romero, J. J. Casas, C. Colldelram, and M. Quispe, “CFD Predictions of Water Flow Through Impellers of the ALBA Centrifugal Pumps and Their Aspiration Zone. An Investigation of Fluid Dynamics Effects on Cavitation Problems”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 299.
- J. Wang, G. Hoffstaetter, and D. Sagan, “Beam-based alignment of individual members of sextupole families”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPA038, pp. 4036-4039.
- M. Champion et al., “Overview of the Spallation Neutron Source Linac Low-Level RF Control System”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAT057, pp. 3396-3398.
- H. P. Hsueh, C.-H. Chang, J.-R. Chen, G.-Y. Hsiung, C.-K. Kuan, and T.-S. Ueng, “Optimization for Taiwan Photon Source Electron Beam Position Monitors through Numerical Simulation”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPLS065, pp. 3436-3438.
- Y. Cai, M. Furman, and M. Pivi, “Buildup of Electron Cloud with Different Bunch Pattern in the Presence of Solenoid Field”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WOAA004, pp. 350-352.
- J.-C. Chang, J.-R. Chen, Y.-C. Lin, Y.-H. Liu, and Z.-D. Tsai, “Design of the Utility System for the 3 GeV TPS Electron Storage Ring”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPLS137, pp. 1828-1830.
- Y. Wang et al., “Experimental Study of Stainless Steel Vacuum Chamber with TiN Film Coating”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO6RFP023, pp. 401-403.
- M. Zisman, “R&D Toward Neutrino Factories and Muon Colliders”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WOAA007, pp. 361-365.
- R. Bodenstein et al., “Current status of conceptual horizontal splitter design for FFA@CEBAF energy Upgrade”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPS126, pp. 810-813.
- G.-Y. Hsiung, C. K. Chan, C.-H. Chang, J.-R. Chen, H. P. Hsueh, and T. L. Yang, “Design Concept of the Vacuum System for the 3 GeV Taiwan Photon Source”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPLS064, pp. 3433-3435.
- J. C. Calvo, A. Ibarra, A. Salom, M. A. Patricio, and M. L. Rivers, “IFMIF LLRF Control System Architecture Based on Epics”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPMS009, pp. 339-342.
- M. Borland, H. Cease, and J. C. Dooling, “Use of Solid Xenon as a Beam Dump Material for 4th-Generation Storage Rings”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 927-930.
- C. Wang, J. L. Hirshfield, and V. P. Yakovlev, “Multicavity Proton Cyclotron Accelerator”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPPG056, pp. 1927-1929.
- C. K. Chan et al., “Design of the TPS Injection System”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU6RFP040, pp. 1632-1634.
- C. N. Booth, P. Hodgson, R. Nicholson, and P. J. Smith, “MICE Target Operation & Monitoring”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6RFP040, pp. 2881-2883.
- Y.-H. Liu, C. K. Chan, C.-H. Chang, J.-R. Chen, K. C. Kuo, and C.-S. Yang, “The EMI Reduction of Pulsed Magnets in NSRRC”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU6RFP014, pp. 1559-1561.
- Y.-H. Liu, J.-C. Chang, J.-R. Chen, and Y.-C. Lin, “Analysis and Reduction Electromagnetic Interference to ICTs Caused by Pulsed Power Supply Excitation in NSRRC”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPCH187, pp. 3239-3241.
- J. Tang, L. Liu, J. Qiu, G. H. Wei, J. Wei, and C. Zhang, “Beam Preparation for the Injection into CSNS RCS”, in Proc. 42nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'08), Nashville, TN, USA, Aug. 2008, paper WGC12, pp. 320-325.
- L. Liu and P. F. Tavares, “Orbit Stability at the Brazilian Synchrotron Light Source”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPE041, pp. 2687-2689.
- C. Nieter and J. R. Cary, “VORPAL: A Computational Tool for the Study of Advanced Accelerator Concepts”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPPG052, pp. 1918-1920.
- F. Eozenou, C. Z. Antoine, A. Aspart, S. Berry, J. F. Denis, and B. Malki, “Efficiency of Electropolishing versus Bath Composition and Aging: First Results”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper THP02, pp. 451-454.
- C. N. Booth et al., “Design and Operational Experience of the MICE Target”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP110, pp. 2764-2766.
- A. B. da Cruz and L. Liu, “Electron Beam Scanning in the Delta-Type Undulators for Sirius”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1300-1303.
Back to search