JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	H. Bendfeldt-Hoppe et al., “Reconstruction of the 75 MeV Linac of the DELTA Synchrotron Radiation Facility”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP3A18, pp. 634-636. 
[n]	S. L. Birch and S. P. Stoneham, “10Hz Pulsed Power Converters for the ISIS Second Target Station(TS-2)”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPD004, pp. 1440-1442. 
[n]	L. Zhang, “Vibration of Magnet-Girder Assembly”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP043G, pp. 2176-2178. 
[n]	D. Horan, B. Brajuskovic, J. T. Collins, L. H. Morrison, and G. J. Waldschmidt, “352-MHz Solid-State RF Power System Development at the Advanced Photon Source”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP078, pp. 1008-1010. 
[n]	B. Xiao, M. J. Kelley, H. L. Phillips, C. E. Reece, and T. Tajima, “RF Surface Impedance of MgB2 Thin Films at 7.5 GHz”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper THPO048, pp. 838-840. 
[n]	E. Ahmadi, M. Jafarzadeh, J. Rahighi, H. Ghasem, and S. M. Jazayeri, “Designing an Ultra Low Emittance Lattices for Iranian Light Source Facility Storage Ring”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2858-2860. doi:10.18429/JACoW-IPAC2016-WEPOW016
[n]	R. Connolly, P. Cameron, R. Michnoff, and S. Tepikian, “Performance of the RHIC IPM”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH033, pp. 1297-1299. 
[n]	S. P. Fomin, N. F. Shul'ga, and S. N. Shul'ga, “Spectral-Angular Distributions of Relativistic Electrons' Radiation in a Thin Layer of Matter”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH095, pp. 2686-2688. 
[n]	Z. Sun et al., “Electroplating of Sn Film on Nb Substrate for Generating Nb?Sn Thin Films and Post Laser Annealing”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 51-54. doi:10.18429/JACoW-SRF2019-MOP014
[n]	R. B. Fiorito, B. E. Carlsten, D. W. Feldman, R. B. Feldman, A. H. Lumpkin, and D. W. Rule, “Optical Transition Radiation Measurements of the Los Alamos Free Electron Laser Driver”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 65-68. 
[n]	N. Ouchi et al., “Proton Linac Activities in JAERI”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97A02, pp. 12-21. 
[n]	F. Trinkel and H. Soltner, “Development and Application of Rogowski Coils as Beam Position Monitors”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 223-226. doi:10.18429/JACoW-IPAC2017-MOPAB054
[n]	K. Abe et al., “Water Cooling Ceramic Chamber for KEKB Kicker Magnet”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP1A15, pp. 2444-2446. 
[n]	F. Dupont and B. Gremont, “The 20 MeV Compact Cyclotron”, in Proc. Cyclotrons'69, Oxford, UK, Sep. 1969, paper CYC69F02, pp. XX-XX. 
[n]	H. Geng, Z. Guo, Z. Li, C. Meng, S. Pei, and J. Y. Tang, “Error Analysis for C-ADS MEBT2”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPWO020, pp. 1925-1927. 
[n]	W. H. Backer et al., “An X-Ray Synchrotron Source for Europe, Members of the Machine Sub-Group of the ESF ad hoc Commiittee for Synchrotron Radiation”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3809-3812. 
[n]	X. Y. Huang et al., “An Alternative Fast Orbit Feedback Design of HEPS”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1888-1890. doi:10.18429/JACoW-IPAC2018-WEPAF032
[n]	A. Laisn?®, “The Orsay 200-MeV Synchro-Cyclotron”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper A-15, pp. 99-102. 
[n]	R. Akre, F. J. Decker, R. K. Jobe, R. Koontz, M. Mitchell, and R. Strozinsky, “SLC Interferometer System and Phase Distribution Upgrades”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8P023, pp. 3021-3023. 
[n]	Yu. P. Vakhrushin, Yu. A. Svistunov, M. F. Vorogushin, and D. V. Efremov, “The Problems of Ion Beams Modeling in Injectors and RFQ Linacs”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TH429, pp. 665-667. 
[n]	H. Meuth, “Longitudinal Synchrotron Beam-Pulse Shapes”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 741-744. 
[n]	V. N. Buldakovsky et al., “Beam Injection into the Nuclotron”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9P011, pp. 184-186. 
[n]	N. Akaoka et al., “High Intensity Proton Accelerator for Neutron Science Project at JAERI”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP07G, pp. 746-748. 
[n]	J. Wang, I. A. Abid, R. T. Keane, and G. S. Sprau, “Preliminary Designs and Test Results of Bipolar Power Supplies for APS Upgrade Storage Ring”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2381-2383. doi:10.18429/JACoW-IPAC2018-WEPMF008
[n]	E. Wooldridge and B. D. Muratori, “Linac Focusing and Beam Break Up for 4GLS”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH040, pp. 2871-2873. 
[n]	V. N. Boriskin, A. N. Savchenko, and V. I. Tatanov, “Monitoring of the Electron Beam Position in Industrial Linacs”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOP42, pp. 753-755. 
[n]	R. J. Faehl and G. Gisler, “Intense Ion Ring Acceleration in a Flux Compressing Liner”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3201-3204. 
[n]	Z. Zhang, F. S. Chen, and Y. F. Yang, “The Magnetic Measurement of Conventional Magnets for Free-Electron Laser Project of Chinese Academy of Engineering Physics”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1115-1117. doi:10.18429/JACoW-IPAC2016-TUPMB006
[n]	A. Drees, P. Cameron, R. Michnoff, C. Montag, and M. Wilinski, “RHIC Transverse Injection Damping”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPG044, pp. 2691-2693. 
[n]	J. Borburgh, T. Fowler, A. Prost, T. Kramer, and T. Stadlbauer, “Design of Electrostatic Septa and Fast Deflector for MedAustron”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPS048, pp. 3532-3534. 
[n]	C. W. Potts and D. F. Marcks, “Self-Optimizing Target Control System”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 642-648. 
[n]	M. Znidarcic, M. Cargnelutti, and E. Janezic, “Compact Single Pass BPM”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1013-1015. doi:10.18429/JACoW-IPAC2015-MOPTY039
[n]	M. Shibata, “Neutrino Beam Line at J-PARC”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP106, pp. 3614-3616. 
[n]	A. A. Asseev, M. Yu. Gorin, and P. T. Pashkov, “The Efficiency Analysis of the Proton Beam Extraction from the IHEP Accelerator by a Bent Silicon Crystal”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP054G, pp. 2412-2414. 
[n]	R. A. Hardekopf, E. F. Higgins, and J. S. Lunsford, “Ferrite Kicker Magnet for the LAMPF Switchyard Upgrade”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3634-3637. 
[n]	M. J. Yang, “A Beamline Analysis Program for Main Injector Commissioning”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOP30, pp. 723-725. 
[n]	J. Palkovic et al., “Measurements on a Gabor Lens for Neutralizing and Focusing a 30 keV Proton Beam”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper MO3-53, pp. 179-181. 
[n]	S. West, M. G. Glover, J. W. Gray, K. Papp, K. Pointner, and L. A. E. Van Lieshout, “The Replacement of the Isis White-circuit Choke”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP136, pp. 3679-3681. 
[n]	O. Brunner, A. Butterworth, G. Cavallari, N. Hilleret, J. M. Jimenez, and J. T??ckmantel, “First Experience with in situ Helium Processing of the LEP Superconducting Modules”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97A14, pp. 133-137. 
[n]	F. Hug and R. G. Heine, “Injector Linac Stability Requirements for High Precision Experiments at MESA”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 876-879. doi:10.18429/JACoW-IPAC2017-MOPVA014
[n]	S. L. Birch, A. Nordt, and D. Paulic, “Personnel Safety Systems for the European Spallation Source”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1036-1038. doi:10.18429/JACoW-IPAC2015-MOPTY046
[n]	C. Yao, B. Deriy, G. Feng, H. Shang, and J. Wang, “Upgrade of the APS Booster Synchrotron Magnet Ramp”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP190, pp. 1181-1183. 
[n]	C. Garc?¡a-Argos, R. Denz, S. Gabourin, C. Martin, B. Puccio, and A. P. Siemko, “Fibre Monitoring System for the Beam Permit Loops at the LHC and Future Evolution of the Beam Interlock System”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1054-1056. doi:10.18429/JACoW-IPAC2015-MOPTY054
[n]	E. W. Nissen and B. Erdelyi, “An Implementation of the Fast Multipole Method for High Accuracy Particle Tracking of Intense Beams”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP157, pp. 1782-1784. 
[n]	J.-B. Lallement, K. Hanke, H. Hori, A. M. Lombardi, and E. Zh. Sargsyan, “Measurement strategy for the CERN Linac4 Chopper-line”, in Proc. HB'06, Tsukuba, Japan, May-Jun. 2006, paper WEBX04, pp. 262-264. 
[n]	L. Sanchez et al., “Design, Fabrication and Tests of the Second Prototype of the Double-Length CLIC PETS”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3887-3889. doi:10.18429/JACoW-IPAC2014-THPRI052
[n]	R. C. Pardo, B. E. Clifft, P. N. Ostroumov, S. I. Sharamentov, and G. P. Zinkann, “Super-Conducting Resonator as Beam Induced Signal Pickup”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPB007, pp. 2426-2428. 
[n]	J.-F. Ostiguy and L. Michelotti, “Mxyzptlk: An Efficient, Native C++ Differentiation Engine”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAN113, pp. 3489-3491. 
[n]	C. I. Briegel and J. S. Diamond, “ACSys Camera Implementation Utilizing an Erlang Framework to C++ Interface”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THPPC066, pp. 1228-1230. 
[n]	M. Xie, “Capillary Waveguide for Laser Acceleration in Vacuum, Gases and Plasmas”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP47C, pp. 830-834. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search