Favourites
For Word
[n] Y. K. Batygin, “Beam Based Steering in LANSCE Proton Low Energy Beam Transport”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2435-2437. doi:10.18429/JACoW-IPAC2017-TUPVA144
[n] J.-P. Delahaye et al., “A Beam Driven Plasma-wakefield Linear Collider from Higgs Factory to Multi-TeV”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3791-3793. doi:10.18429/JACoW-IPAC2014-THPRI013
[n] Y. K. Batygin and F. Marti, “Beam Funneling in the Facility for Rare Isotope Beams”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5REP120, pp. 5062-5064.
[n] P. Muggli et al., “Electron Bunch Self-modulation in Long Plasmas at SLAC FACET”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1476-1478. doi:10.18429/JACoW-IPAC2014-TUPME050
[n] D. Janssen and V. Volkov, “Design of a Superconducting Cavity for a SRF Injector”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPLS044, pp. 2472-2474.
[n] R. Haseitl, H. Br?ñuning, T. Hoffmann, K. Lang, and T. Milosic, “SIS18 Upgrade: The FAIR Compliant Renovation of the Data Acquisition System for Particle Detectors”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 133-136. doi:10.18429/JACoW-ICALEPCS2015-MOPGF022
[n] L. Piersanti et al., “The RF System of the ELI-NP Gamma Beam Source”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 407-410. doi:10.18429/JACoW-IPAC2016-MOPMW006
[n] P. Schnizer, E. S. Fischer, A. Mierau, and B. Schnizer, “Some Comments to Magnetic Field Representation for Beam Dynamic Calculations”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPC057, pp. 262-264.
[n] M. A. Power and F. H. Munson, “Evolution of the Argonne Tandem Linear Accelerator System (ATLAS) Control System”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPMS024, pp. 371-373.
[n] D. Kayran et al., “Status and Commissioning Results of the R&D ERL at BNL”, in Proc. ERL'15, Stony Brook, NY, USA, Jun. 2015, pp. 10-14. doi:10.18429/JACoW-ERL2015-MOPDTH014
[n] D. B. Beltran et al., “PCI/cPCI Interface for PSI Power Supply Controller”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEP032, pp. 471-473.
[n] S. Esin, L. Kravchuk, V. Paramonov, and G. Romanov, “The Disk and Washer Structure for Moscow Meson Factory Linac”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper TH3-53, pp. 657-659.
[n] V. Balandin, W. Decking, and N. Golubeva, “Invariant Criterion for the Design of Multiple Beam Profile Emittance and Twiss Parameters Measurement Sections”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPWO011, pp. 1901-1903.
[n] S. Barbanotti, M. Bonezzi, C. Engling, K. Jensch, R. Mattusch, and M. Todero, “Production and Qualification of Low Thermal Conduction Suspension Supports for the Cold Mass of Long Superconducting Acceleration Modules”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP115, pp. 829-831.
[n] V. Balandin, R. Brinkmann, W. Decking, and N. Golubeva, “Second Order Achromats with Arbitrary Linear Transfer Matrices”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC062, pp. 2160-2162.
[n] A. Meseck, G. H. Hoffstaetter, F. Loehl, and C. E. Mayes, “FELs as X-ray Sources in ERL Facilities”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THP144, pp. 2390-2392.
[n] Y. K. Batygin, “Space Charge Neutralization of 750 keV Proton Beam in LANSCE Injector Line”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 685-687. doi:10.18429/JACoW-IPAC2015-MOPMA057
[n] S. S. Serednyakov et al., “Control System for Magnet Power Supplies for Novosibirsk Free Electron Laser”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPMU021, pp. 480-482.
[n] G. S. Dobbing and A. Wolski, “Instability Threshold Calculations for DIAMOND”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP7B03, pp. 1116-1118.
[n] L. Rosen, “Relevance of Particle Accelerators to National Goals”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 29-36.
[n] S. Tazzari et al., “Work on Superconducting Linacs in Progress in Frascati”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper FR1-02, pp. 680-683.
[n] C. Kaya et al., “Beam Diagnostics E-GUN Test Stand at TARLA”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 704-706. doi:10.18429/JACoW-IPAC2014-MOPRI045
[n] D. Janssen, H. Bluem, A. M. M. Todd, and V. Volkov, “Axial RF Power Input in Photocathode Electron Guns”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MOPB011, pp. 743-745.
[n] T. S. Mohite, U. Ratzinger, R. Balß, and P. Hülsmann, “Development of a Broad-band Magnetic Alloy Cavity at GSI”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPC003, pp. 3275-3277.
For LaTeX
Use Complete Form
For BibTeX
References
- Y. K. Batygin, “Beam Based Steering in LANSCE Proton Low Energy Beam Transport”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2435-2437.
- J.-P. Delahaye et al., “A Beam Driven Plasma-wakefield Linear Collider from Higgs Factory to Multi-TeV”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3791-3793.
- Y. K. Batygin and F. Marti, “Beam Funneling in the Facility for Rare Isotope Beams”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5REP120, pp. 5062-5064.
- P. Muggli et al., “Electron Bunch Self-modulation in Long Plasmas at SLAC FACET”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1476-1478.
- D. Janssen and V. Volkov, “Design of a Superconducting Cavity for a SRF Injector”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPLS044, pp. 2472-2474.
- R. Haseitl, H. Br?ñuning, T. Hoffmann, K. Lang, and T. Milosic, “SIS18 Upgrade: The FAIR Compliant Renovation of the Data Acquisition System for Particle Detectors”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 133-136.
- L. Piersanti et al., “The RF System of the ELI-NP Gamma Beam Source”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 407-410.
- P. Schnizer, E. S. Fischer, A. Mierau, and B. Schnizer, “Some Comments to Magnetic Field Representation for Beam Dynamic Calculations”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPC057, pp. 262-264.
- M. A. Power and F. H. Munson, “Evolution of the Argonne Tandem Linear Accelerator System (ATLAS) Control System”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPMS024, pp. 371-373.
- D. Kayran et al., “Status and Commissioning Results of the R&D ERL at BNL”, in Proc. 56th Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'15), Stony Brook, NY, USA, Jun. 2015, pp. 10-14.
- D. B. Beltran et al., “PCI/cPCI Interface for PSI Power Supply Controller”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WEP032, pp. 471-473.
- S. Esin, L. Kravchuk, V. Paramonov, and G. Romanov, “The Disk and Washer Structure for Moscow Meson Factory Linac”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper TH3-53, pp. 657-659.
- V. Balandin, W. Decking, and N. Golubeva, “Invariant Criterion for the Design of Multiple Beam Profile Emittance and Twiss Parameters Measurement Sections”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPWO011, pp. 1901-1903.
- S. Barbanotti, M. Bonezzi, C. Engling, K. Jensch, R. Mattusch, and M. Todero, “Production and Qualification of Low Thermal Conduction Suspension Supports for the Cold Mass of Long Superconducting Acceleration Modules”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPP115, pp. 829-831.
- V. Balandin, R. Brinkmann, W. Decking, and N. Golubeva, “Second Order Achromats with Arbitrary Linear Transfer Matrices”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPC062, pp. 2160-2162.
- A. Meseck, G. H. Hoffstaetter, F. Loehl, and C. E. Mayes, “FELs as X-ray Sources in ERL Facilities”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper THP144, pp. 2390-2392.
- Y. K. Batygin, “Space Charge Neutralization of 750 keV Proton Beam in LANSCE Injector Line”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 685-687.
- S. S. Serednyakov et al., “Control System for Magnet Power Supplies for Novosibirsk Free Electron Laser”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPMU021, pp. 480-482.
- G. S. Dobbing and A. Wolski, “Instability Threshold Calculations for DIAMOND”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP7B03, pp. 1116-1118.
- L. Rosen, “Relevance of Particle Accelerators to National Goals”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 29-36.
- S. Tazzari et al., “Work on Superconducting Linacs in Progress in Frascati”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper FR1-02, pp. 680-683.
- C. Kaya et al., “Beam Diagnostics E-GUN Test Stand at TARLA”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 704-706.
- D. Janssen, H. Bluem, A. M. M. Todd, and V. Volkov, “Axial RF Power Input in Photocathode Electron Guns”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MOPB011, pp. 743-745.
- T. S. Mohite, U. Ratzinger, R. Balß, and P. Hülsmann, “Development of a Broad-band Magnetic Alloy Cavity at GSI”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPC003, pp. 3275-3277.
Back to search