Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] K. Shipman, A. Alexander, J. Lewellen, S. Sosa Guitron, R. Thornton, and H. Xu, “Design and optimization of a 10.0625 MHz low-frequency buncher for a 201.25 MHz RFQ accelerator”, presented at the IPAC'26, Deauville, France, May 2026, paper THP3314, unpublished.
[n] P. Kneisel et al., “Development of Superconducting Cavities of Cylindrical Symmetry at Cornell”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3348-3351.
[n] M. J. Ferreira, R. O. Ferraz, F. A. Minuzzi, and M. B. Silva, “LNLS Vacuum System Commissioning”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4P018, pp. 3628-3629.
[n] T. Kubo et al., “Development of Superconducting Spoke Cavity for Electron Accelerators”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper THPP075, pp. 1030-1033.
[n] O. Kamalou, P. Delahaye, M. Dubois, and A. Savalle, “Status Report on GANIL and Upgrade of SPIRAL1”, in Proc. Cyclotrons'19, Cape Town, South Africa, Sep. 2019, pp. 9-11. doi:10.18429/JACoW-CYCLOTRONS2019-MOA03
[n] L.-P. Hsu, C.-Y. Liao, J.-K. Liao, C. Wu, Z. Wu, and C.-K. Yang, “Migration of control system operator interfaces from EDM to Phoebus OPI at TPS”, presented at the IPAC'26, Deauville, France, May 2026, paper MOP6672, unpublished.
[n] S. F. Rey et al., “Experience with Beam Transfer Function Measurements for Setting-up the Stochastic Cooling System in the CERN Anti-Proton Decelerator (AD)”, in Proc. COOL2023, Montreux, Switzerland, Oct. 2023, pp. 102-105. doi:10.18429/JACoW-COOL2023-THPOSRP22
[n] M. Dayyani Kelisani and H. Shaker, “Design of a Low Emittance High Current Photocathode RF Gun for the IPM Linear Accelerator”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1431-1433. doi:10.18429/JACoW-IPAC2017-TUPAB047
[n] Z. Wu, L.-P. Hsu, S.-H. Lee, C.-Y. Liao, J.-K. Liao, and C. Wu, “Implementation of EPU66S control system at the Taiwan Photon Source”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 2956-2959. doi:10.18429/JACoW-IPAC2025-THPS008
[n] J. R. Delayen, “Medium-?ƒ Superconducting Accelerating Structures”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper FA007, pp. XX-XX.
[n] L. Zhu, J. S. Shen, and Z. Wu, “The Design of a Superconducting Dipole Magnet Based on Tilted Solenoids”, in Proc. Cyclotrons'22, Beijing, China, Dec. 2022, paper WEPO007, pp. 214-218. doi:10.18429/JACoW-CYCLOTRONS2022-WEPO007
[n] D. F. Sutter et al., “Coherent Phenomena over a Broad Range of Beam Intensities in the Electron Storage Ring UMER”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5PFP063, pp. 4455-4457.
[n] C.-Y. Liao et al., “Motion protection framework for TPS insertion device control”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 3040-3042. doi:10.18429/JACoW-IPAC2025-THPS034
[n] M. J. Ferreira et al., “Design, Development, Construction and Installation of a Ceramic Chamber for a Pulsed Kicker at the LNLS Storage Ring”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WOAB009, pp. 689-691.
[n] P. W. Huang, W.-H. Huang, and C.-X. Tang, “Model of Photocathode for CW Electron Gun”, in Proc. FEL'17, Santa Fe, NM, USA, Aug. 2017, pp. 394-396. doi:10.18429/JACoW-FEL2017-WEA02
For LaTeX
Use Complete Form
For BibTeX
References
- K. Shipman, A. Alexander, J. Lewellen, S. Sosa Guitron, R. Thornton, and H. Xu, “Design and optimization of a 10.0625 MHz low-frequency buncher for a 201.25 MHz RFQ accelerator”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper THP3314, this conference.
- P. Kneisel et al., “Development of Superconducting Cavities of Cylindrical Symmetry at Cornell”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3348-3351.
- M. J. Ferreira, R. O. Ferraz, F. A. Minuzzi, and M. B. Silva, “LNLS Vacuum System Commissioning”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 4P018, pp. 3628-3629.
- T. Kubo et al., “Development of Superconducting Spoke Cavity for Electron Accelerators”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper THPP075, pp. 1030-1033.
- O. Kamalou, P. Delahaye, M. Dubois, and A. Savalle, “Status Report on GANIL and Upgrade of SPIRAL1”, in Proc. 22nd Int. Conf. on Cyclotrons and their Applications (Cyclotrons'19), Cape Town, South Africa, Sep. 2019, pp. 9-11.
- L.-P. Hsu, C.-Y. Liao, J.-K. Liao, C. Wu, Z. Wu, and C.-K. Yang, “Migration of control system operator interfaces from EDM to Phoebus OPI at TPS”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper MOP6672, this conference.
- S. F. Rey et al., “Experience with Beam Transfer Function Measurements for Setting-up the Stochastic Cooling System in the CERN Anti-Proton Decelerator (AD)”, in Proc. 14th International Workshop on Beam Cooling and Related Topics (COOL2023), Montreux, Switzerland, Oct. 2023, paper THPOSRP22, pp. 102-105.
- M. Dayyani Kelisani and H. Shaker, “Design of a Low Emittance High Current Photocathode RF Gun for the IPM Linear Accelerator”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1431-1433.
- Z. Wu, L.-P. Hsu, S.-H. Lee, C.-Y. Liao, J.-K. Liao, and C. Wu, “Implementation of EPU66S control system at the Taiwan Photon Source”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPS008, pp. 2956-2959.
- J. R. Delayen, “Medium-?ƒ Superconducting Accelerating Structures”, in Proc. 10th Workshop RF Superconductivity (SRF'01), Tsukuba, Japan, Sep. 2001, paper FA007, pp. XX-XX.
- L. Zhu, J. S. Shen, and Z. Wu, “The Design of a Superconducting Dipole Magnet Based on Tilted Solenoids”, in Proc. 23rd Int. Conf. Cyclotrons Appl. (Cyclotrons'22), Beijing, China, Dec. 2022, paper WEPO007, pp. 214-218.
- D. F. Sutter et al., “Coherent Phenomena over a Broad Range of Beam Intensities in the Electron Storage Ring UMER”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5PFP063, pp. 4455-4457.
- C.-Y. Liao et al., “Motion protection framework for TPS insertion device control”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPS034, pp. 3040-3042.
- M. J. Ferreira et al., “Design, Development, Construction and Installation of a Ceramic Chamber for a Pulsed Kicker at the LNLS Storage Ring”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WOAB009, pp. 689-691.
- P. W. Huang, W.-H. Huang, and C.-X. Tang, “Model of Photocathode for CW Electron Gun”, in Proc. 38th Int. Free Electron Laser Conf. (FEL'17), Santa Fe, NM, USA, Aug. 2017, pp. 394-396.
Back to search