Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] T. Ieiri, “Hysteresis Phenomena in Bunch Lengthening at the KEK Accumulation Ring”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP063G, pp. 1066-1068.
[n] M. R. Shubaly and J. G. Plato, “A Multi-Channel Fibre-Optic Link for Analog Telemtry”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2296-2299.
[n] V. Variale, V. Valentino, G. Brautti, A. Boggia, and A. Raino', “First Tests of the Trapped Ion Source”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA11, pp. 1905-1907.
[n] T. Jurgens and M. Foley, “A Numerical Method for Determining the Coupling Strengths and Resonant Frequencies of a Nonperiodic Coupled Cavity Chain”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 852-855.
[n] R. H. Farias et al., “LNLS Control System”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP062L, pp. 1791-1793.
[n] V. G. Vaccaro et al., “Study of a Linac Booster for Proton Therapy in the 30-62 MeV Energy Range”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT070, pp. 1312-1314.
[n] H. Mori et al., “Developments of Long-pulse Klystron Modulator for KEK Super-conducting RF Test Facility”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THIBKI04, pp. 2691-2692.
[n] F. Brinker, “Commissioning of the European XFEL Injector”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1044-1047. doi:10.18429/JACoW-IPAC2016-TUOCA03
[n] A. M. Hutton et al., “Status of the SLC Damping Rings”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1659-1662.
[n] F. Iazzourene et al., “Elettra Top-up Requirements and Design Status”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS031, pp. 3350-3352.
[n] S. Condamoor, S. Allison, J. J. Sebek, J. A. Vasquez, and J. V. Wachter, “Booster RF Upgrade for SPEAR3”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 401-405. doi:10.18429/JACoW-ICALEPCS2017-TUPHA014
[n] P. F. Tavares et al., “LNLS-2: A New High Performance Synchrotron Radiation Source for Brazil”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH4PBC01, pp. 3166-3168.
[n] F. H. Cardoso, J. F. Citadini, S. R. Marques, X. R. Resende, and R. M. Seraphim, “Beam Position Interlock System for the LNLS 4 Tesla Superconducting Wiggler”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEA005, pp. 2478-2480.
[n] G. Sattonnay et al., “Is it Possible to Use Additive Manufacturing for Accelerator UHV Beam Pipes?”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2240-2243. doi:10.18429/JACoW-IPAC2019-WEXXPLS3
[n] H. M. Kewlani, D. P. Chakravarthy, S. Gharat, L. Mishra, K. C. Mittal, and P. Roychowdhury, “Electron Cyclotron Resonance Ion Source Control System”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper THPD43, pp. 217-218.
[n] N. Heurich, F. Frommberger, P. Haenisch, and W. Hillert, “Radiation Protection Concepts for the Beamline for Detector Tests at ELSA”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1799-1801. doi:10.18429/JACoW-IPAC2014-TUPRI097
[n] A. Hofmann et al., “The Green Energy Turbine as Turbo Generator for Powering the HV-Solenoids at a Relativistic Electron Cooler”, in Proc. COOL'15, Newport News, VA, USA, Sep.-Oct. 2015, paper MOPF02, pp. 29-31.
[n] N. Angert et al., “Accelerating and Separating Mixed Beams of Ions with Similar Charge to Mass Ratio in the CERN PS Complex”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1367-1370.
[n] M. Fujimoto et al., “GENERATION OF SELF-AMPLIFIED SPONTANEOUS EMISSION AND ITS HIGHER HARMONICS IN THE FAR-INFRARED REGION”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper WEP023, pp. XX-XX.
[n] K. Nakanishi et al., “KEKB/SuperKEKB Cryogenics Operation”, in Proc. eeFACT'18, Hong Kong, China, Sep. 2018, pp. 276. doi:10.18429/JACoW-eeFACT2018-WEPAB04
[n] J. M. Brennan et al., “Design of Ferrite Loaded High Voltage Barrier Cavity”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP22G, pp. 1829-1831.
[n] O. Pinazza et al., “Managing Information Flow in ALICE”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPKN015, pp. 124-126.
[n] V. Kamerdzhiev, J. Dietrich, F. Klehr, and K. Reimers, “Progress with the Scintillation Profile Monitor at COSY”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper MOPD51, pp. 164-166.
[n] D. Kelliher et al., “Adiabatic capture in high-intensity, high-power rings”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper MOPS005, unpublished.
[n] V. Sabaiduc et al., “BEST 70P Cyclotron Commissioning at INFN LN Legnaro”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 241-243. doi:10.18429/JACoW-Cyclotrons2016-TUD04
[n] T. Stammbach, S. Adam, A. Mezger, P. A. Schmelzbach, and P. Sigg, “Cyclotron Performance and New Developments”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper FRXGB002, pp. 159-163.
[n] J. McCarrick, Y.-J. Chen, T. L. Houck, and B. R. Poole, “Trapping Backstreaming Ions from an X-ray Converter Using an Inductive Cell”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TH4028, pp. 833-835.
[n] L. M. C. Feliciano et al., “A New Hardware Design for PSB Kicker Magnets (KSW) for the 35 mm Transverse Painting in the Horizontal Plane”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3890-3892. doi:10.18429/JACoW-IPAC2015-THPF086
For LaTeX
Use Complete Form
For BibTeX
References
- T. Ieiri, “Hysteresis Phenomena in Bunch Lengthening at the KEK Accumulation Ring”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP063G, pp. 1066-1068.
- M. R. Shubaly and J. G. Plato, “A Multi-Channel Fibre-Optic Link for Analog Telemtry”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2296-2299.
- V. Variale, V. Valentino, G. Brautti, A. Boggia, and A. Raino', “First Tests of the Trapped Ion Source”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEA11, pp. 1905-1907.
- T. Jurgens and M. Foley, “A Numerical Method for Determining the Coupling Strengths and Resonant Frequencies of a Nonperiodic Coupled Cavity Chain”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 852-855.
- R. H. Farias et al., “LNLS Control System”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP062L, pp. 1791-1793.
- V. G. Vaccaro et al., “Study of a Linac Booster for Proton Therapy in the 30-62 MeV Energy Range”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPLT070, pp. 1312-1314.
- H. Mori et al., “Developments of Long-pulse Klystron Modulator for KEK Super-conducting RF Test Facility”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THIBKI04, pp. 2691-2692.
- F. Brinker, “Commissioning of the European XFEL Injector”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1044-1047.
- A. M. Hutton et al., “Status of the SLC Damping Rings”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 1659-1662.
- F. Iazzourene et al., “Elettra Top-up Requirements and Design Status”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPLS031, pp. 3350-3352.
- S. Condamoor, S. Allison, J. J. Sebek, J. A. Vasquez, and J. V. Wachter, “Booster RF Upgrade for SPEAR3”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 401-405.
- P. F. Tavares et al., “LNLS-2: A New High Performance Synchrotron Radiation Source for Brazil”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH4PBC01, pp. 3166-3168.
- F. H. Cardoso, J. F. Citadini, S. R. Marques, X. R. Resende, and R. M. Seraphim, “Beam Position Interlock System for the LNLS 4 Tesla Superconducting Wiggler”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEA005, pp. 2478-2480.
- G. Sattonnay et al., “Is it Possible to Use Additive Manufacturing for Accelerator UHV Beam Pipes?”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2240-2243.
- H. M. Kewlani, D. P. Chakravarthy, S. Gharat, L. Mishra, K. C. Mittal, and P. Roychowdhury, “Electron Cyclotron Resonance Ion Source Control System”, in Proc. 9th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'12), Kolkata, India, Dec. 2012, paper THPD43, pp. 217-218.
- N. Heurich, F. Frommberger, P. Haenisch, and W. Hillert, “Radiation Protection Concepts for the Beamline for Detector Tests at ELSA”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1799-1801.
- A. Hofmann et al., “The Green Energy Turbine as Turbo Generator for Powering the HV-Solenoids at a Relativistic Electron Cooler”, in Proc. 10th Workshop on Beam Cooling and Related Topics (COOL'15), Newport News, VA, USA, Sep.-Oct. 2015, paper MOPF02, pp. 29-31.
- N. Angert et al., “Accelerating and Separating Mixed Beams of Ions with Similar Charge to Mass Ratio in the CERN PS Complex”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1367-1370.
- M. Fujimoto et al., “GENERATION OF SELF-AMPLIFIED SPONTANEOUS EMISSION AND ITS HIGHER HARMONICS IN THE FAR-INFRARED REGION”, in Proc. 2nd Asian Particle Accelerator Conf. (APAC'01), Beijing, China, Sep. 2001, paper WEP023, pp. XX-XX.
- K. Nakanishi et al., “KEKB/SuperKEKB Cryogenics Operation”, in Proc. 62nd ICFA Advanced Beam Dynamics Workshop on High Luminosity Circular e+e- Colliders (eeFACT'18), Hong Kong, China, Sep. 2018, pp. 276.
- J. M. Brennan et al., “Design of Ferrite Loaded High Voltage Barrier Cavity”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP22G, pp. 1829-1831.
- O. Pinazza et al., “Managing Information Flow in ALICE”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPKN015, pp. 124-126.
- V. Kamerdzhiev, J. Dietrich, F. Klehr, and K. Reimers, “Progress with the Scintillation Profile Monitor at COSY”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper MOPD51, pp. 164-166.
- D. Kelliher et al., “Adiabatic capture in high-intensity, high-power rings”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPS005, this conference.
- V. Sabaiduc et al., “BEST 70P Cyclotron Commissioning at INFN LN Legnaro”, in Proc. 21th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'16), Zurich, Switzerland, Sep. 2016, pp. 241-243.
- T. Stammbach, S. Adam, A. Mezger, P. A. Schmelzbach, and P. Sigg, “Cyclotron Performance and New Developments”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper FRXGB002, pp. 159-163.
- J. McCarrick, Y.-J. Chen, T. L. Houck, and B. R. Poole, “Trapping Backstreaming Ions from an X-ray Converter Using an Inductive Cell”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TH4028, pp. 833-835.
- L. M. C. Feliciano et al., “A New Hardware Design for PSB Kicker Magnets (KSW) for the 35 mm Transverse Painting in the Horizontal Plane”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3890-3892.
Back to search