JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	H. Kotaki et al., “Research for an Advanced Accelerator at JAERI-APRC”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper MOP99915, pp. XX-XX. 
[n]	J. Grillenberger and M. Schneider, “PSI HIPA Facility: Operation and Upgrade Plans”, presented at the HB'23, Geneva, Switzerland, Oct. 2023, paper TUA4I1, unpublished. 
[n]	J. Wei et al., “Field Quality Evaluation of the Superconducting Magnets of the Relativistic Heavy Ion Collider”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WAP10, pp. 461-463. 
[n]	J. K. Bair et al., “Design Considerations for the ORNL 25 MV Tandem Accelerator”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1655-1659. 
[n]	F. R. Gallegos, A. A. Browman, and L. J. Morrison, “The Development of a Beam Current Monitor System for Measuring Pulsed-Beam Current Over a Wide Dynamic Range”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1959-1962. 
[n]	Y. W. Kang et al., “High Power RF Test Facility at the SNS”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAT059, pp. 3450-3452. 
[n]	J. N. Weaver, “Controls for Operating and Processing the MIT-LNS Linac”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 576-580. 
[n]	H. Akiyama, K. Hiramoto, and H. Kubo, “Development of Magnet Power Supply System for Fast Pattern Excitation”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP1A04, pp. 2196-2198. 
[n]	L. V. Kravchuk, V. A. Puntus, G. V. Romanov, and S. G. Tarasov, “Multipactoring Studies in Accelerating Structures”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TU4-54, pp. 465-467. 
[n]	M. Ruf, P. Quednau, L. Schmidt, and S. Setzer, “Applicability of the AM-PM Conversion Method to Beam Position Monitoring of Electron Beams accelerated in S-Band Frequency Range”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper MOPD20, pp. 86-88. 
[n]	I. Podadera et al., “Developments for IFMIF/EVEDA LIPAc Beam Position Monitors: The Sensors at the MEBT and the Wire Test Bench”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper TUPD11, pp. 320-322. 
[n]	D. M. Haider et al., “Versatile Beamline Cryostat for the Cryogenic Current Comparator (CCC) for FAIR”, in Proc. IBIC'19, Malmö, Sweden, Sep. 2019, pp. 78-81. doi:10.18429/JACoW-IBIC2019-MOPP007
[n]	E. J. Prebys et al., “Increasing the Intensity of the Fermilab Booster”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAG022, pp. 2936-2938. 
[n]	Y. Sato et al., “Progress of a Control System for Slow-Extraction Beam Lines at J-PARC”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P1_001. 
[n]	S. Adam, W. Joho, and C. J. Kost, “Longitudinal Space-Charge-Effects in the SIN Injector II and the SIN Ring Cyclotron”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper EP-40, pp. 529-531. 
[n]	T. Natsui, K. Lee, A. Mori, F. Sakamoto, and M. Uesaka, “Beam Measurement Experiment of X-band Linac for Compton Scattering X-ray Generation”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEA010, pp. 82-84. 
[n]	C. Gough et al., “The SLS Booster Synchrotron”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP26G, pp. 584-586. 
[n]	C. A. Kitegi et al., “QUAPEVA: Variable High Gradient Permanent Magnet Quadrupole”, in Proc. FLS'18, Shanghai, China, Mar. 2018, pp. 89-92. doi:10.18429/JACoW-FLS2018-WEA2WD01
[n]	J. N. Weaver, J. B. Styles, and P. B. Wilson, “Bench Measurements of the Loss Impedance for PEP Beam Line Components”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3971-3974. 
[n]	A. Boggia, G. Brautti, A. P. Errico, A. Rain, V. Valentino, and V. Variale, “Study of a Trapped Ion Source”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP01B, pp. 1433-1435. 
[n]	A. Radeva, J. M. E. Elyn, F. Locci, T. Oulevey, and M. Vanden Eynden, “Selecting a Linux Operating System for CERN Accelerator Controls”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1475-1479. doi:10.18429/JACoW-ICALEPCS2023-THPDP064
[n]	P. Kneisel, R. W. R?Âth, and H.-G. K??rschner, “Results from a Nearly Defect-Free Niobium Cavity”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper SRF95C17, pp. 449-453. 
[n]	F. Alharthi et al., “Target Studies for the FCC-ee Positron Source”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1979-1982. doi:10.18429/JACoW-IPAC2022-WEPOPT054
[n]	Y. Suzuki et al., “Upgrade of a Low-Level Controller of Magnet Power Supply”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper MP571, pp. XX-XX. 
[n]	G. Wang et al., “Path to high current 500 mA at NSLS-II”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper TUPG13, unpublished. 
[n]	R. Chebab, J. Bonnard, G. Humbert, B. Leblond, and J. L. Saury, “A Multiwire Secondary Emission Profile Monitor for Small Emittance Beams”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1953-1956. 
[n]	J. A. Martin et al., “The 4 - Me V Separated-Orbit Cyclotron”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 479-482. 
[n]	J. D. Jarvis et al., “Uniformity Conditioning of Diamond Field-Emitter Arrays”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper TUPPH028, pp. 302-304. 
[n]	R. Baer, M. Schwickert, and T. Fleck, “Requirements and Coherent Realization of the HICAT Control System Functionality for Test, Commissioning, and Operation”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper RPPB29, pp. 674-676. 
[n]	J.-Y. Raguin et al., “Progress in the Design of a New 150-MHz Flat Top Cavity for the PSI RING Cyclotron”, in Proc. Cyclotrons'22, Beijing, China, Dec. 2022, paper WEPO018, pp. 241-244. doi:10.18429/JACoW-CYCLOTRONS2022-WEPO018
[n]	F. M. Bieniosek, K. Anderson, and K. Fullett, “Requirements for a Beam Sweeping System for the Fermilab Antiproton Source Target”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WAR17, pp. 1939-1941. 
[n]	W. D. Kimura et al., “Design and Model Simulations of Inverse Cerenkov Acceleration Using Inverse Free Electron Laser Prebunching”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7V013, pp. 675-677. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search