JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	H. J. Kim and Y. Chung, “Operation status of the RAON facility”, presented at the HIAT'25, East Lansing, MI, USA, Jun. 2025, paper MOY02, unpublished. 
[n]	A. A. Grigoreva, S. N. Galyamin, A. V. Tyukhtin, and V. V. Vorobev, “The Electromagnetic Field Structure in the Circular Waveguide with Transverse Boundary”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 435-437. doi:10.18429/JACoW-RUPAC2016-WEPSB034
[n]	S. Hancock and A. Chanc?®, “Stacking Simulations in the Beta-beam Decay Ring”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS085, pp. 1699-1701. 
[n]	S. N. Galyamin and A. V. Tyukhtin, “Axicon-Based Concentrator for Cherenkov Radiation”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2036-2038. doi:10.18429/JACoW-IPAC2021-TUPAB250
[n]	M. J. Rhee and B. N. Ding, “Beam Loading in a High Current Accelerating Gap”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2999-3002. 
[n]	M. A. Green et al., “Lessons Learned for the MICE Coupling Solenoid from the MICE Spectrometer Solenoids”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEB060, pp. 406-408. 
[n]	S. Xu, G. Decker, R. I. Farnsworth, F. Lenkszus, H. Shang, and X. Sun, “Simulation of the APS Storage Ring Orbit Real-Time Feedback System Upgrade Using MATLAB”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPP070, pp. 2870-2872. 
[n]	Y. Papaphilippou et al., “Experimental Frequency Maps for the ESRF Storage Ring”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT084, pp. 2050-2052. 
[n]	S. Lueders, “Summary of the Control System Cyber-Security (CS)2/HEP Workshop”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper MOPA01, pp. 18-22. 
[n]	G. Azzopardi, A. Muscat, S. Redaelli, B. Salvachua, and G. Valentino, “Operational Results of LHC Collimator Alignment Using Machine Learning”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1208-1211. doi:10.18429/JACoW-IPAC2019-TUZZPLM1
[n]	T. Ieiri, H. Fukuma, Y. Ohnishi, and M. Tobiyama, “Measurement of Wake Effects by Means of Tune Shift in the KEKB Low-Energy Ring”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPCH078, pp. 2101-2103. 
[n]	T. A. Treado and S. J. Einarson, “Power Couplers for the ILC”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THIBKI02, pp. 2685-2687. 
[n]	W. Beeckman, Y. Jongen, D. Vandeplassche, and S. Zaremba, “235 MeV Cyclotron for MGH's Northeast Proton Therapy Centre NPTC: Present Status”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP074G, pp. 2650-2652. 
[n]	C.-S. Fann et al., “Electron Beam Excitation at SRRC Booster during Ramping by Using a X-Y Kicker”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPRI093, pp. 590-592. 
[n]	G. Khatri, A. Frassier, G. Tranquille, and J. Cenede, “Development of high-power electron gun and collector for the new antiproton decelerator electron cooler”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1680-1683. doi:10.18429/JACoW-IPAC2024-TUPS19
[n]	M. McGee, R. Doremus, and R. Wands, “Mechanical Stability Study of Type IV Cryomodule (ILC Prototype)”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMN104, pp. 2277-2279. 
[n]	A. Galat?á, E. Sattin, and S. Canella, “Spectra Acquisition System for the LNL ECR Ion Source”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper WPPA17, pp. 350-352. 
[n]	K. Yamamoto, T. Hattori, M. Okamura, and S. Yamada, “The Study of APF-IH Linac”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPLT079, pp. 2679-2681. 
[n]	D. Fernandez-Carreiras et al., “Building S.C.A.D.A. Systems in Scientific Installations with Sardana and Taurus”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1820-1825. doi:10.18429/JACoW-ICALEPCS2017-THPHA169
[n]	A. Deyhim, J. D. Kulesza, and K. I. Blomqvist, “Development of Accurate and Precise In-Vacuum Undulator System”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP237, pp. 1268-1270. 
[n]	P. J. T. Bruinsma, T. Subrata, and A. T. Visser, “A Novel Power Supply for High Duty Factor Kicker Magnets”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3071-3073. 
[n]	A. Neumann, W. Anders, T. Kamps, J. Knobloch, and E. N. Zaplatin, “Photoinjector SRF Cavity Development for BERLinPro”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper THPB066, pp. 993-995. 
[n]	M. Krupa and M. Gasior, “Precise Digital Integration of Fast Analogue Signals Using a 12-Bit Oscilloscope”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper WEPF18, pp. 584-587. 
[n]	S. Morita et al., “The Tohoku University 680 Model Cyclotron and Facility”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper A-12, pp. 1930-1933. 
[n]	S.-C. Kim et al., “New Magnet Power Supply for PAL Linac”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPLS132, pp. 2685-2687. 
[n]	M. Boscolo, S. Bertolucci, C. Curceanu Petrascu, S. Guiducci, and G. von Holtey, “Experience with Beam Induced Backgrounds in the DAɸNE Detectors”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPPH163, pp. 2032-2034. 
[n]	R. M. Seraphim et al., “Installation and Commissioning of the Sirius Vacuum System”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3455-3458. doi:10.18429/JACoW-IPAC2021-WEPAB333
[n]	J. Dilly and R. Tom?ís Garc?¡a, “A Flexible Nonlinear Resonance Driving Term Based Correction Algorithm with Feed-Down”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1999-2002. doi:10.18429/JACoW-IPAC2022-WEPOPT061
[n]	C. E. Reece, J. K. Spradlin, O. Trofimova, and A-M. Valente-Feliciano, “Standardized Beamline Particulate Characterization Analysis: Initial Application to CEBAF and LCLS-II Cryomodule Components”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 647-650. doi:10.18429/JACoW-SRF2017-TUPB106
[n]	J. Benjamin, C. Carlson, I. Feigenbaum, M. Manni, D. B. Steski, and P. Thieberger, “Injecting RHIC from the Brookhaven Tandem Van de Graaff”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEP9, pp. 2277-2279. 
[n]	V. G. Andreev, V. V. Paramonov, and , “The Distortion of the Accelerating Field Distribution in Compensated Structures due to Steady-State Beam Loading”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPP19, pp. 1702-1704. 
[n]	H. Sakai et al., “High Power CW Tests of cERL Main-Linac Cryomodule”, in Proc. SRF'13, Paris, France, Sep. 2013, paper THIOC02, pp. 855-859. 
[n]	F. Hinder, H. Soltner, F. Trinkel, and H.-J. Krause, “Development of New Beam Position Monitors at COSY”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 339-343. doi:10.18429/JACoW-IBIC2015-TUPB015
[n]	A. Liapine Technische Universit?ñt, “Cavity Beam Position Monitor For The TESLA Energy Spectrometer”, in Proc. DIPAC'03, Mainz, Germany, May 2003, paper PT07, pp. XX-XX. 
[n]	G. Cuni, F. Becheri, D. Fernandez-Carreiras, Z. Reszela, and S. Rubio-Manrique, “Introducing the SCRUM Framework as Part of the Product Development Strategy for the ALBA Control System”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 60-63. doi:10.18429/JACoW-ICALEPCS2015-MOD3O04
[n]	J. Dehen et al., “Beam Dynamics in an Energy-variable RF-Accelerator for Ion Implantation”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2641-2644. 
[n]	W. W. Zhang et al., “Magnetic Field Measurements of Printed-Circuit Quadrupoles and Dipoles”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THP170, pp. 3372-3374. 
[n]	Y. Sumitomo, K. Hayakawa, Y. Hayakawa, K. Nogami, T. Sakai, and T. Tanaka, “Toward THz Coherent Undulator Radiation Experiment with a Combination of Velocity Bunchings”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1663-1665. doi:10.18429/JACoW-IPAC2021-TUPAB116
[n]	D. P. Jensen Jr, “Utilizing Additive Manufacturing to Create Prototype and Functional Beamline Instrumentation and Support Components”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 189. doi:10.18429/JACoW-MEDSI2020-TUPC07
[n]	D. Gonnella, T. Gruber, J. J. Kaufman, P. N. Koufalis, M. Liepe, and J. T. Maniscalco, “Optimal Nitrogen Doping Level to Reach High Q0”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 523-526. doi:10.18429/JACoW-LINAC2016-TUPLR025

For LaTeX

Use Complete Form

For BibTeX

References

Back to search