Warning
Please note that we have recently received feedback indicated that atleast one of these reference may have a problem.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] P. Muggli, “The AWAKE Proton-Driven Plasma Wakefield Acceleration Experiment at CERN”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper MOOBB1, pp. 72-74.
[n] E. W. Nissen, “The Beam-Beam Effect and Its Consequences for the Modeling of the Jefferson Lab EIC”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3909-3911. doi:10.18429/JACoW-IPAC2017-THPAB082
[n] A. Migliori, D. W. Reagor, D. E. Peterson, J. O. Willis, Z. Fisk, and R. C. Smith, “RF and Microwave Measurements at Los Alamos on Oxide Superconductors”, in Proc. SRF'87, Lemont, IL, USA, Sep. 1987, paper SRF87B07, pp. XX-XX.
[n] G. Devanz, “A 2D Multipactor Simulation Code for RF Components and Accelerating Cavities”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP2A02, pp. 1366-1368.
[n] C.-K. Ng and T. Weiland, “Impedance Analysis of the PEP-II Vacuum Chamber”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WAB18, pp. 3061-3063.
[n] N. Hazewindus, “Some Studies on the Axial Injection System for a Compact Cyclotron”, in Proc. Cyclotrons'69, Oxford, UK, Sep. 1969, paper CYC69G05, pp. XX-XX.
[n] T. J. Maxwell, C. L. Bohn, D. Mihalcea, and P. Piot, “Vector Diffraction Theory and Coherent Transition Radiation Interferometry in Electron Linacs”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMS035, pp. 4015-4017.
[n] G. Lopez, “Quench Simulation Studies of the TAC Jelly Roll Superferric Dipole Corrector Elements for the SSC”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2224-2227.
[n] B. N. Markov, “The JINR U-400 Isochronous Heavy Ion Cyclotron”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1215-1218.
[n] K. Johnsen, “Experiences in During the Early Running-in Phase of the ISR”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 199-204.
[n] S. Posen et al., “Flux Expulsion Variation in SRF Cavities”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper MOPB104, pp. 404-408.
[n] J. Wu, “LCLS-II: An Upgrade for the Linac Coherent Light Source”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper TUOBI1, pp. 197-197.
[n] N. Barov, “A Low-Voltage Klystron for the ILC and ILC Testing Program”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMS083, pp. 2526-2528.
[n] W. Liu, W. Gai, and K.-J. Kim, “Systematic Study of Undulator Based ILC Positron Source: Production and Capture”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMN090, pp. 2918-2920.
[n] V. D. Shiltsev, “Novel ASTA Users Facility at Fermilab: a Testbed for Superconductying RF Technology and ERL R&D”, in Proc. ERL'13, Novosibirsk, Russia, Sep. 2013, paper WG305, pp. 54-57.
[n] D. Husmann, “Review of CW Electron Machines”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 62-67.
[n] S. Aderhold, D. Kostin, A. Matheisen, A. Navitski, and D. Reschke, “Analysis of Degraded Cavities in Prototype Modules for the European XFEL”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper MOPB090, pp. 355-358.
[n] B. C. Yunn, “High Brightness Injectors Based on Photocathode DC Gun”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH070, pp. 2254-2256.
[n] C. Tennant, “Modeling Challenges for Energy Recovery Linacs With Long, High Charge Bunches”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3544-3547. doi:10.18429/JACoW-IPAC2018-THPAK129
[n] E. S. Masunov and A. S. Roshal, “Focusing of Ribbon Beam in Undulator Linear Accelerator”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4W007, pp. 2835-2837.
[n] G. Reinhold, “High Voltage DC Power Supplies for Beam Injectors”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 117-119.
[n] R. Hajima and T. Tajima, “Beyond the International Linear Collider: Driven by FEL with Energy Recovery at 5-10TeV”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper TUPP066, pp. XX-XX.
[n] V. M. Panasyuk, M. I. Bryzgunov, A. V. Bubley, V. V. Parkhomchuk, and V. B. Reva, “Matching of Magnetic Field with Energy of Electrons in 2 MeV COSY Cooler”, in Proc. COOL'13, Mürren, Switzerland, Jun. 2013, paper WEPPO07, pp. 110-112.
[n] M. Znidarcic, “Spark EL - Single Pass BPM”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 471-473. doi:10.18429/JACoW-FEL2015-TUP044
[n] T. Higo, “Linear Collider Structures”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper WE1-03, pp. 621-625.
[n] R. Li, “Applications of the Cancellation Effect in the CSR Studies”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TOAC009, pp. 208-210.
[n] R. McAdams, A. J. T. Holmes, G. Proudfoot, R. F. King, and S. Cox, “Development of Bright Negative Ion Sources at Culham Laboratory”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TH4-12, pp. 636-638.
[n] J. Qiao, Y. H. Pu, and X. C. Xie, “The Beam Dynamics Design of the Proton Synchrotron Linear Injector for Proton Therapy”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3167-3169. doi:10.18429/JACoW-IPAC2019-WEPTS031
[n] P. Krejcik, “Waveguide Stub-Line Tuning of RF Cavities with Heavy Beam Loading”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8P027, pp. 3030-3032.
[n] G. Reinhold, J. Bill, and K. Truempy, “The Symmetrical Rectifier. An Accelerator Power Supply in the Megavolt and Milliampere Range”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 288-293.
[n] Yu. N. Grigor'ev and A.Yu. Zelinsky, “A Mathematical Model for Investigating Chromatic Electron Beam Extraction from a Pulse Stretcher Ring”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAA07, pp. 539-541.
[n] S. G. Arutunian, “The Particles Scattering on the Hard Part of Synchrotron Radiation in the Accelerators and Storage Rings: The Influence on the Beam Dynamics”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 629-631.
[n] P. Zhang et al., “A 166.6 MHz Superconducting RF System for the HEPS Storage Ring”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1049-1051. doi:10.18429/JACoW-IPAC2017-MOPVA079
[n] L. Liu et al., “Advances in Beam Orbit Stability at the LNLS Electron Storage Ring”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPCH005, pp. 1924-1926.
[n] R. C. Sethi, “Electron Beam Accelerators for Material Processing: A BARC Scenario”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper THP16063, pp. XX-XX.
[n] E. Tanabe, M. Bayer, and M. Trail, “A Small Diameter Standing Wave Linear Accelerator Structure”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2975-2978.
[n] J. Struckmeier, “Self-Consistent Non-K-V Distributions for Periodic Focusing Systems”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2516-2519.
[n] M. Kesselman, “Spallation Neutron Source Beam Current Monitor Electronics”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH102, pp. 2323-2325.
[n] W. Lawson, “Space-charge-limited Magnetron Injection Guns for Gyroklystrons”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPKF055, pp. 1072-1074.
[n] A. Dobrosavljevi, M. Raj, N. Gruji, and V. Vujovi, “Spiral Inflector Exchange System Of The Vincy Cyclotron”, in Proc. Cyclotrons'07, Giardini-Naxos, Italy, Oct. 2007, pp. 409-411.
[n] M. L. Sundquist et al., “Operation of a 3 MeV Ampere Intensity DC Electron Recirculation System”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 316-319.
[n] J. McKeown, R. T. F. Bird, K. C. D. Chan, S. H. Kidner, and J.-P. Labrie, “High Power, On-Axis Coupled Linac Structure”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper I04, pp. 332-334.
[n] G. Tool, “A Fast Digitizer and Display System”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1567-1570.
[n] P. Livdahl, “Linac Fabrication Problems”, in Proc. LINAC'63, New Heaven, CT, USA, Oct. 1963, paper 14-01, pp. 449-455.
[n] J. L. Laclare, “Critical Review of Target Specifications for Third Generation Synchrotron Radiation Light Sources”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 113-116.
[n] J. M. Ortega, “Coherent XUV Harmonic ProductionProposals for Synchrotron Light Sources”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3359-3363.
[n] K. Saito, “Experimental Formula of the ON-set Level of Two-point Multipacting Over the RF Frequency Range 500 MHz to 1300 MHz”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper PR019, pp. 419-422.
[n] P. Emma and T. O. Raubenheimer, “Circumference Correction Chicanes for Damping Rings”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA23, pp. 3438-3440.
[n] D. Garzella et al., “SRFEL Linewidth Narrowing in the Ultraviolet”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper THPP001, pp. XX-XX.
[n] J. A. Holt, “Normal Form Analzsis of the Tevatron”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 988-991.
[n] C. Birattari et al., “Transverse Beam Measurments using a Compter Based Image Analysis System”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1661-1664.
[n] D. C. Hagerman, “Los Alamos Meson Factory: Present Status and Future Plans”, in Proc. Cyclotrons'66, Gatlinburg, TN, USA, Aug. 1966, paper E-002, pp. XX-XX.
[n] N. Pichoff and J.-M. Lagniel, “End to End Simulations of the RX2 Beam Transport”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPLT050, pp. 2595-2597.
[n] H. Zen et al., “Status of Top-up Operation in UVSOR-II”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEA039, pp. 2576-2578.
[n] S. L. Kramer and J. B. Murphy, “Variable Momentum Compaction Lattice Studies”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUBL6, pp. 140-142.
[n] R. Grill, W. C. Feuring, W. C. Heraeus GmbH, W. Simader, and B. Spaniol, “Production of High-Purity-Niobium under Industrial Scale for Upcoming Linear Collider Projects”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6PFP001, pp. 1287-1289.
[n] Shigeru. Takeda, K. Oide, and Masakazu. Yoshioka. Kikuo. Kudo, “Ground Motion Issue on the Large Accelerator Alignment”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 4D072, pp. 266-270.
For LaTeX
Use Complete Form
For BibTeX
References
- P. Muggli, “The AWAKE Proton-Driven Plasma Wakefield Acceleration Experiment at CERN”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper MOOBB1, pp. 72-74.
- E. W. Nissen, “The Beam-Beam Effect and Its Consequences for the Modeling of the Jefferson Lab EIC”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3909-3911.
- A. Migliori, D. W. Reagor, D. E. Peterson, J. O. Willis, Z. Fisk, and R. C. Smith, “RF and Microwave Measurements at Los Alamos on Oxide Superconductors”, in Proc. 3rd Int. Conf. RF Superconductivity (SRF'87), Lemont, IL, USA, Sep. 1987, paper SRF87B07, pp. XX-XX.
- G. Devanz, “A 2D Multipactor Simulation Code for RF Components and Accelerating Cavities”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP2A02, pp. 1366-1368.
- C.-K. Ng and T. Weiland, “Impedance Analysis of the PEP-II Vacuum Chamber”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WAB18, pp. 3061-3063.
- N. Hazewindus, “Some Studies on the Axial Injection System for a Compact Cyclotron”, in Proc. 5th Int. Cyclotron Conf. (Cyclotrons'69), Oxford, UK, Sep. 1969, paper CYC69G05, pp. XX-XX.
- T. J. Maxwell, C. L. Bohn, D. Mihalcea, and P. Piot, “Vector Diffraction Theory and Coherent Transition Radiation Interferometry in Electron Linacs”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRPMS035, pp. 4015-4017.
- G. Lopez, “Quench Simulation Studies of the TAC Jelly Roll Superferric Dipole Corrector Elements for the SSC”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2224-2227.
- B. N. Markov, “The JINR U-400 Isochronous Heavy Ion Cyclotron”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1215-1218.
- K. Johnsen, “Experiences in During the Early Running-in Phase of the ISR”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 199-204.
- S. Posen et al., “Flux Expulsion Variation in SRF Cavities”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper MOPB104, pp. 404-408.
- J. Wu, “LCLS-II: An Upgrade for the Linac Coherent Light Source”, in Proc. 32nd Int. Free Electron Laser Conf. (FEL'10), Malmö, Sweden, Aug. 2010, paper TUOBI1, pp. 197-197.
- N. Barov, “A Low-Voltage Klystron for the ILC and ILC Testing Program”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMS083, pp. 2526-2528.
- W. Liu, W. Gai, and K.-J. Kim, “Systematic Study of Undulator Based ILC Positron Source: Production and Capture”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMN090, pp. 2918-2920.
- V. D. Shiltsev, “Novel ASTA Users Facility at Fermilab: a Testbed for Superconductying RF Technology and ERL R&D”, in Proc. 53th Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'13), Novosibirsk, Russia, Sep. 2013, paper WG305, pp. 54-57.
- D. Husmann, “Review of CW Electron Machines”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 62-67.
- S. Aderhold, D. Kostin, A. Matheisen, A. Navitski, and D. Reschke, “Analysis of Degraded Cavities in Prototype Modules for the European XFEL”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper MOPB090, pp. 355-358.
- B. C. Yunn, “High Brightness Injectors Based on Photocathode DC Gun”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH070, pp. 2254-2256.
- C. Tennant, “Modeling Challenges for Energy Recovery Linacs With Long, High Charge Bunches”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3544-3547.
- E. S. Masunov and A. S. Roshal, “Focusing of Ribbon Beam in Undulator Linear Accelerator”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 4W007, pp. 2835-2837.
- G. Reinhold, “High Voltage DC Power Supplies for Beam Injectors”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 117-119.
- R. Hajima and T. Tajima, “Beyond the International Linear Collider: Driven by FEL with Energy Recovery at 5-10TeV”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper TUPP066, pp. XX-XX.
- V. M. Panasyuk, M. I. Bryzgunov, A. V. Bubley, V. V. Parkhomchuk, and V. B. Reva, “Matching of Magnetic Field with Energy of Electrons in 2 MeV COSY Cooler”, in Proc. 9th Workshop on Beam Cooling and Related Topics (COOL'13), Mürren, Switzerland, Jun. 2013, paper WEPPO07, pp. 110-112.
- M. Znidarcic, “Spark EL - Single Pass BPM”, in Proc. 37th Int. Free Electron Laser Conf. (FEL'15), Daejeon, Korea, Aug. 2015, pp. 471-473.
- T. Higo, “Linear Collider Structures”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper WE1-03, pp. 621-625.
- R. Li, “Applications of the Cancellation Effect in the CSR Studies”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TOAC009, pp. 208-210.
- R. McAdams, A. J. T. Holmes, G. Proudfoot, R. F. King, and S. Cox, “Development of Bright Negative Ion Sources at Culham Laboratory”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TH4-12, pp. 636-638.
- J. Qiao, Y. H. Pu, and X. C. Xie, “The Beam Dynamics Design of the Proton Synchrotron Linear Injector for Proton Therapy”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3167-3169.
- P. Krejcik, “Waveguide Stub-Line Tuning of RF Cavities with Heavy Beam Loading”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 8P027, pp. 3030-3032.
- G. Reinhold, J. Bill, and K. Truempy, “The Symmetrical Rectifier. An Accelerator Power Supply in the Megavolt and Milliampere Range”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 288-293.
- Yu. N. Grigor'ev and A.Yu. Zelinsky, “A Mathematical Model for Investigating Chromatic Electron Beam Extraction from a Pulse Stretcher Ring”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RAA07, pp. 539-541.
- S. G. Arutunian, “The Particles Scattering on the Hard Part of Synchrotron Radiation in the Accelerators and Storage Rings: The Influence on the Beam Dynamics”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 629-631.
- P. Zhang et al., “A 166.6 MHz Superconducting RF System for the HEPS Storage Ring”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1049-1051.
- L. Liu et al., “Advances in Beam Orbit Stability at the LNLS Electron Storage Ring”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPCH005, pp. 1924-1926.
- R. C. Sethi, “Electron Beam Accelerators for Material Processing: A BARC Scenario”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper THP16063, pp. XX-XX.
- E. Tanabe, M. Bayer, and M. Trail, “A Small Diameter Standing Wave Linear Accelerator Structure”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2975-2978.
- J. Struckmeier, “Self-Consistent Non-K-V Distributions for Periodic Focusing Systems”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2516-2519.
- M. Kesselman, “Spallation Neutron Source Beam Current Monitor Electronics”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH102, pp. 2323-2325.
- W. Lawson, “Space-charge-limited Magnetron Injection Guns for Gyroklystrons”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPKF055, pp. 1072-1074.
- A. Dobrosavljevi, M. Raj, N. Gruji, and V. Vujovi, “Spiral Inflector Exchange System Of The Vincy Cyclotron”, in Proc. 18th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'07), Giardini-Naxos, Italy, Oct. 2007, pp. 409-411.
- M. L. Sundquist et al., “Operation of a 3 MeV Ampere Intensity DC Electron Recirculation System”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 316-319.
- J. McKeown, R. T. F. Bird, K. C. D. Chan, S. H. Kidner, and J.-P. Labrie, “High Power, On-Axis Coupled Linac Structure”, in Proc. 1981 Linear Accelerator Conf. (LINAC'81), Santa Fe, NM, USA, Oct. 1981, paper I04, pp. 332-334.
- G. Tool, “A Fast Digitizer and Display System”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1567-1570.
- P. Livdahl, “Linac Fabrication Problems”, in Proc. 1963 Conf. on Proton Linear Accelerators (LINAC'63), New Heaven, CT, USA, Oct. 1963, paper 14-01, pp. 449-455.
- J. L. Laclare, “Critical Review of Target Specifications for Third Generation Synchrotron Radiation Light Sources”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 113-116.
- J. M. Ortega, “Coherent XUV Harmonic ProductionProposals for Synchrotron Light Sources”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3359-3363.
- K. Saito, “Experimental Formula of the ON-set Level of Two-point Multipacting Over the RF Frequency Range 500 MHz to 1300 MHz”, in Proc. 10th Workshop RF Superconductivity (SRF'01), Tsukuba, Japan, Sep. 2001, paper PR019, pp. 419-422.
- P. Emma and T. O. Raubenheimer, “Circumference Correction Chicanes for Damping Rings”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA23, pp. 3438-3440.
- D. Garzella et al., “SRFEL Linewidth Narrowing in the Ultraviolet”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper THPP001, pp. XX-XX.
- J. A. Holt, “Normal Form Analzsis of the Tevatron”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 988-991.
- C. Birattari et al., “Transverse Beam Measurments using a Compter Based Image Analysis System”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1661-1664.
- D. C. Hagerman, “Los Alamos Meson Factory: Present Status and Future Plans”, in Proc. Int. Conf. on Isochronous Cyclotrons (Cyclotrons'66), Gatlinburg, TN, USA, Aug. 1966, paper E-002, pp. XX-XX.
- N. Pichoff and J.-M. Lagniel, “End to End Simulations of the RX2 Beam Transport”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPLT050, pp. 2595-2597.
- H. Zen et al., “Status of Top-up Operation in UVSOR-II”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEA039, pp. 2576-2578.
- S. L. Kramer and J. B. Murphy, “Variable Momentum Compaction Lattice Studies”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUBL6, pp. 140-142.
- R. Grill, W. C. Feuring, W. C. Heraeus GmbH, W. Simader, and B. Spaniol, “Production of High-Purity-Niobium under Industrial Scale for Upcoming Linear Collider Projects”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU6PFP001, pp. 1287-1289.
- Shigeru. Takeda, K. Oide, and Masakazu. Yoshioka. Kikuo. Kudo, “Ground Motion Issue on the Large Accelerator Alignment”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 4D072, pp. 266-270.
Back to search