Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] G. Lanfranco et al., “Development of Ultra-High Quality Surface Finish Undulator Vacuum Chambers for the FERMI@Elettra Project”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPD023, pp. 3138-3140.
[n] K. Togawa, A. Higashiya, and T. Shintake, “Graphite Heater Optimized for a Low-emittance CeB6 Cathode”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPMN043, pp. 1013-1015.
[n] F. Q. Zhang, T. Adachi, H. Someya, and H. Sato, “Phase Synchronization of Multi-Network System for Resonant Excitation of the JHF 3-GeV Booster Magnets”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA158, pp. 3752-3754.
[n] D. Satoh, N. Hayashizaki, T. Natsui, and M. Yoshida, “Development of Iridium Cerium Photocathode for the Generation of High-Charge Electron Beam”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 679-681. doi:10.18429/JACoW-IPAC2014-MOPRI037
[n] P. B. Vasilev and A. M. Tron, “A New Technique for Transverse Phase Ellipse Measurement”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TU461, pp. 477-479.
[n] E. Zaplatin, W. Braeutigam, M. Pap, M. Skrobucha, and R. Stassen, “Low-Beta SC H-Cavity for ESS”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPDO018, pp. 2300-2301.
[n] N. Elias et al., “Testing of SRF Cavities and Cryomodules for the European Spallation Source”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 95-99. doi:10.18429/JACoW-SRF2017-MOPB018
[n] L. H. Harwood and B. F. Milton, “Magnetic Field Calculations of the NSCL K800 Superconducting Cyclotron Magnet”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper I1-11, pp. 318-320.
[n] G. A. Amatuni et al., “Beam Diagnostics and Control for the AREAL RF Photogun Linac”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3418-3420. doi:10.18429/JACoW-IPAC2014-THPME079
[n] S. Bousson et al., “Inert Gas Plasma Spraying for Cavity Stiffening Using Copper Coating”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper PT024, pp. XX-XX.
[n] H. Matsumoto, M. Akemoto, H. Hayano, T. Naito, and S. R. Takeda, “High-Gradient Experiment of the S-Band Electron Linac”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TH417, pp. 629-631.
[n] L. Dietl, K. Rieger, and U. Trinks, “Lead Alloys for Superconducting Cavities”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3605-3607.
[n] A. Yeremyan et al., “Application of low-energy, tunable-delay ultrashort electron bunch pairs for irradiation experiments”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4142-4145. doi:10.18429/JACoW-IPAC2023-THPA076
[n] A. Jeff, S. Doebert, T. Lefevre, and K. Pepitone, “Simulation of the Beam Dump for a High Intensity Electron Gun”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper WEPF05, pp. 536-539.
[n] J. H. Dieperink, J.-L. Bretin, E. Carlier, L. Ducimeti, G. H. Schr, and E. Vossenberg, “Design Aspects Related to the Reliability of the LHC Beam Dump Kicker Systems”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8P007, pp. 225-227.
[n] M. Minty, “Collective Effects Associated with Ultra-High Beam Intensities in Factories”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEZF101, pp. 146-150.
[n] Y. Nakazawa et al., “Prototype of an Inter-digital H-mode Drift-tube Linac for Muon Linac”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 180-183. doi:10.18429/JACoW-LINAC2018-MOPO085
[n] S. Aull et al., “On the Understanding of Q-Slope of Niobium Thin Films”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper TUBA03, pp. 494-500.
[n] D. Huang, D. Gu, and M. Zhang, “Study of Microbunching Instability in SHINE Linac”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 629-631. doi:10.18429/JACoW-FEL2019-THP016
For LaTeX
Use Complete Form
For BibTeX
References
- G. Lanfranco et al., “Development of Ultra-High Quality Surface Finish Undulator Vacuum Chambers for the FERMI@Elettra Project”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPD023, pp. 3138-3140.
- K. Togawa, A. Higashiya, and T. Shintake, “Graphite Heater Optimized for a Low-emittance CeB6 Cathode”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPMN043, pp. 1013-1015.
- F. Q. Zhang, T. Adachi, H. Someya, and H. Sato, “Phase Synchronization of Multi-Network System for Resonant Excitation of the JHF 3-GeV Booster Magnets”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA158, pp. 3752-3754.
- D. Satoh, N. Hayashizaki, T. Natsui, and M. Yoshida, “Development of Iridium Cerium Photocathode for the Generation of High-Charge Electron Beam”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 679-681.
- P. B. Vasilev and A. M. Tron, “A New Technique for Transverse Phase Ellipse Measurement”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TU461, pp. 477-479.
- E. Zaplatin, W. Braeutigam, M. Pap, M. Skrobucha, and R. Stassen, “Low-Beta SC H-Cavity for ESS”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THPDO018, pp. 2300-2301.
- N. Elias et al., “Testing of SRF Cavities and Cryomodules for the European Spallation Source”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 95-99.
- L. H. Harwood and B. F. Milton, “Magnetic Field Calculations of the NSCL K800 Superconducting Cyclotron Magnet”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper I1-11, pp. 318-320.
- G. A. Amatuni et al., “Beam Diagnostics and Control for the AREAL RF Photogun Linac”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3418-3420.
- S. Bousson et al., “Inert Gas Plasma Spraying for Cavity Stiffening Using Copper Coating”, in Proc. 10th Workshop RF Superconductivity (SRF'01), Tsukuba, Japan, Sep. 2001, paper PT024, pp. XX-XX.
- H. Matsumoto, M. Akemoto, H. Hayano, T. Naito, and S. R. Takeda, “High-Gradient Experiment of the S-Band Electron Linac”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TH417, pp. 629-631.
- L. Dietl, K. Rieger, and U. Trinks, “Lead Alloys for Superconducting Cavities”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3605-3607.
- A. Yeremyan et al., “Application of low-energy, tunable-delay ultrashort electron bunch pairs for irradiation experiments”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPA076, pp. 4142-4145.
- A. Jeff, S. Doebert, T. Lefevre, and K. Pepitone, “Simulation of the Beam Dump for a High Intensity Electron Gun”, in Proc. 3rd Int. Beam Instrumentation Conf. (IBIC'14), Monterey, CA, USA, Sep. 2014, paper WEPF05, pp. 536-539.
- J. H. Dieperink, J.-L. Bretin, E. Carlier, L. Ducimeti, G. H. Schr, and E. Vossenberg, “Design Aspects Related to the Reliability of the LHC Beam Dump Kicker Systems”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 8P007, pp. 225-227.
- M. Minty, “Collective Effects Associated with Ultra-High Beam Intensities in Factories”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEZF101, pp. 146-150.
- Y. Nakazawa et al., “Prototype of an Inter-digital H-mode Drift-tube Linac for Muon Linac”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 180-183.
- S. Aull et al., “On the Understanding of Q-Slope of Niobium Thin Films”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper TUBA03, pp. 494-500.
- D. Huang, D. Gu, and M. Zhang, “Study of Microbunching Instability in SHINE Linac”, in Proc. 39th Int. Free Electron Laser Conf. (FEL'19), Hamburg, Germany, Aug. 2019, pp. 629-631.
Back to search