JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	M.-C. Lin et al., “A Coupled-Field Analysis on a 500 MHz Superconducting Radio Frequency Niobium Cavity”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPDO032, pp. 2259-2261. 
[n]	F. Ciocci et al., “Recent Results of the ENEA Frascati FEL Experiment”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 550-552. 
[n]	J. C. Jan et al., “Magnet Design and Control of Field Quality for TPS Booster and Storage Rings”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1370-1372. doi:10.18429/JACoW-IPAC2015-TUAD1
[n]	J. Corbett and A. Terebilo, “Interactive Orbit Control Program in MATLAB”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH022, pp. 813-815. 
[n]	L. Lecz, O. Boine-Frankenheim, and V. Kornilov, “PIC Simulations of Laser Ion Acceleration via TNSA”, in Proc. ICAP'12, Rostock-Warnemunde, Germany, Aug. 2012, paper FRSAI3, pp. 290-293. 
[n]	R. Biwer, “A Microprocessor Based Beam Intensity and Efficiency Display System for the Fermilab Accelerator”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3448-3451. 
[n]	T. K. Khoe, Y. Cho, R. J. Holt, H. E. Jackson, and G. S. Mavrogenes, “The Design of the Argonne Double-Sided Microtron”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2077-2080. 
[n]	J. Bao, T. Liu, J. Tang, P. Yang, L. Zhang, and Y. Zou, “Simulation of the magnet error correction for the Super Tau-Charm Facility collider rings”, presented at the IPAC'26, Deauville, France, May 2026, paper THP5616, unpublished. 
[n]	A. A. Nosych, U. Iriso, A. Olmos, and M. Wendt, “Overview of the Geometrical Non-Linear Effects of Button BPMs and Methodology for Their Efficient Suppression”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper TUPF03, pp. 298-302. 
[n]	J. H. Takakuwa, C. D. Hernikl, T. M. Lipton, T. A. Stevens, and T. Warwick, “Fabrication, Assembly, and Metrology Methods to Optimize an Adjustable Exit Slit for a Soft X-ray Beamline”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 374-377. doi:10.18429/JACoW-MEDSI2016-WEPE39
[n]	L. O. Dallin and W. A. Wurtz, “A Low Emittance Lattice Design for the Canadian Light Source”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 194-196. doi:10.18429/JACoW-IPAC2014-MOPRO049
[n]	M. Vogt, B. Faatz, J. Feldhaus, K. Honkavaara, S. Schreiber, and R. Treusch, “The Free-electron Laser FLASH at DESY”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPEA004, pp. 1167-1169. 
[n]	M. Y. Huang, L. Huang, N. Huang, J. Qiu, S. Wang, and S. Y. Xu, “Study on the transverse painting during the injection process for CSNS/RCS”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2025-2027. doi:10.18429/JACoW-IPAC2015-TUPTY015
[n]	H. Huang et al., “Polarized Proton Acceleration at the Brookhaven AGS -- An Update”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPLE054, pp. 335-337. 
[n]	G. L. Cox, D. T. Ficht, C. D. Jonah, G. S. Mavrogenes, and M. C. Sauer, “A Five-Picosecond, Electron pulse from the ANL L-Band Linac”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 912-915. 
[n]	F. Nolden et al., “Radioactive Beam Accumulation for a Storage Ring Experiment with an Internal Target”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPEA013, pp. 91-93. 
[n]	J. P. Delahaye and A. Krusche, “The Lattice Design of the LEP Electron Positron Accumulator (EPA)”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2050-2053. 
[n]	A. Brachmann et al., “LCLS RF Gun Copper Cathode Performance”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC134, pp. 3200-3202. 
[n]	S. P. Virostek et al., “Update on the Modification and Testing of the MICE Superconducting Spectrometer Solenoids”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPO033, pp. 2469-2471. 
[n]	W. M. Sharp et al., “Simulating Electron Effects in Heavy-Ion Accelerators with Solenoid Focusing”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAS050, pp. 3603-3605. 
[n]	B. Wei, “Invited Paper: HIRFL Separated Sector Cyclotron Progress”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper E-03, pp. 176-183. 
[n]	J. Tuggle, M. J. Kelley, A. D. Palczewski, C. E. Reece, and F. A. Stevie, “Investigation of Low-Level Nitrogen in Niobium by Secondary Ion Mass Spectrometry”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 196-198. doi:10.18429/JACoW-LINAC2016-MOPLR025
[n]	C.-Y. Liu, Y.-C. Chien, and H. M. Shih, “Performance Evaluation of the Switching Mode AC Power Supply”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP125, pp. 3652-3654. 
[n]	B. Bravo et al., “Calibration of the Acceleration Voltage of Six Normal Conducting Cavities at ALBA”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3036-3038. doi:10.18429/JACoW-IPAC2015-WEPMN049
[n]	G. Iadarola, H. Bartosik, M. Driss Mensi, H. Neupert, G. Rumolo, and M. Taborelli, “Recent Electron Cloud Studies in the SPS”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPEA014, pp. 2525-2527. 
[n]	D. Lanaia, M. A. Fraser, and D. Voulot, “Overview of the New High Level Software Applications Developed for the HIE-ISOLDE Superconducting Linac”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP029, pp. 117-120. 
[n]	S. C. Dillon, “Development of a 9 MHz 15 kW Solid-state CW Amplifier for RHIC”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 67-69. doi:10.18429/JACoW-IPAC2015-MOBD3
[n]	H. M. Miyadera, A. J. Jason, and S. S. Kurennoy, “Simulation of Large Acceptance Muon Linac”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPE076, pp. 3521-3523. 
[n]	G. R. Murdoch, “Remote Handling in High-Power Proton Facilities”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper ROAD002, pp. 174-178. 
[n]	W. A. McFarlin, W. W. Chapman, M. N. June, and W. B. Wilson, “Heavy Ion Development at TAMVEC”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 132-134. 
[n]	R. Wagner, A. B. Bienkowski, S. Choroba, A. Gamp, T. G. Grevsmuehl, and G. M. Moeller, “Experience with the 208MHz and 52MHz RF Systems for the HERA Proton Accelerator”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH117, pp. 1289-1291. 
[n]	J. N. Bai, S. Xiao, T. G. Xu, and L. Zeng, “The Development of Timing Control System for RFQ”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper SUPB037, pp. 89-91. 
[n]	A. Puntambekar and M. G. Karmarkar, “Approach Towards Development of 350 MHz Bulk Niobium SCRF Cavities for 10MeV Prototyping Phase of the Proposed Proton LINAC”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper TUP34, pp. 385-387. 
[n]	J. M. Ortega, “Single-pass FELs”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 115-119. 
[n]	M. Grieser et al., “Recent Developments at the TSR Heidelberg”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 518-521. 
[n]	T. Roser et al., “Accelerating and Colliding Polarized Protons in RHIC with Siberian Snakes”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THAGB003, pp. 209-211. 
[n]	M. Fradj, R. Christmann, M. Hartung, and P. Strehl, “A New Design of Profile Grid Electronics with High Performance”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper MO3-22, pp. 93-95. 
[n]	W. Pellico, K. A. Domann, F. G. Garcia, K. E. Gollwitzer, K. Seiya, and R. M. Zwaska, “FNAL - The Proton Improvement Plan (PIP)”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3409-3411. doi:10.18429/JACoW-IPAC2014-THPME075
[n]	E. Tanabe, G. A. Loew, and J. W. Wang, “Voltage Breakdown at X-Band and C-Band Frequencies”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper TH3-11, pp. 458-460. 
[n]	A. Perry, A. Barcikowski, G. L. Cherry, C. Dickerson, B. Mustapha, and P. N. Ostroumov, “EBIS Charge Breeder at ANL and its Integration into ATLAS”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3969-3972. doi:10.18429/JACoW-IPAC2015-THPF108
[n]	L. Merminga et al., “ARIEL: TRIUMF's Advanced Rare IsotopE Laboratory”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEOBA01, pp. 1917-1919. 
[n]	J. S. Pennington, R. C. Davidson, I. Kaganovich, A. B. Sefkow, and E. Startsev, “Charge and Current Neutralization of an Ion Beam Pulse by Background Plasma in Presence of Applied Magnetic Field and Gas Ionization”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAS083, pp. 3675-3677. 
[n]	J. W. Wang and G. A. Loew, “HEM11 Modes Revisited”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper MO433, pp. 135-137. 
[n]	E. P. Lee, C. Fong, S. Mukherjee, and W. Thur, “Conceptual Design of Bend, Compression and Final Focus Components of ILSE”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 971-974. 
[n]	J. S. Kolski, R. J. Macek, and R. C. McCrady, “A Statistical Analysis of the Beam Position Measurement in the Los Alamos Proton Storage Ring”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper TUPSM018, pp. 146-150. 
[n]	A. V. Samoshin and S. M. Polozov, “3D Beam Dynamic Simulation in Heavy Ion Superconducting Drift Tube Linac”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPS038, pp. 685-687. 
[n]	J. Whealton, R. Raridon, K. Rothe, T. Owens, and W. Becraft, “Nonlinear Beam Dynamics in a Funnel for Combining Two Intense Ion Beams”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper MO3-04, pp. 38-47. 
[n]	J. Thangaraj, N. Eddy, R. Zwaska, K. Seiya, I. Kourbanis, and J. Crisp, “Electron Cloud Studies in the Fermilab Main Injector Using Microwave Transmission”, in Proc. ECLOUD'10, Ithaca, NY, USA, Oct. 2010, paper DIA00, pp. 173-176. 
[n]	P. Y. Nabhiraj, R. K. Bhandari, G. G, C. Mallik, R. Menon, and S. Mohan, “Design of High Current RF Ion Source for Micromachining Applications”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper TUPMA113, pp. 262-264. 
[n]	M. M. Berndt and C. Guracar, “A Solid State DC Polarity Reversing Switch”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 899-901. 
[n]	W. Losert, R. Christmann, M. Fradj, M. Hartung, P. Strehl, and D. Wilms, “Fast On Line Phase Measurement of Pulsed RF Signals in the Range of 9-108MHz”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper MO3-23, pp. 96-97. 
[n]	T. Goetsch, J. Feikes, M. Ries, G. Wuestefeld, and A.-S. Mueller, “Lifetime Studies at Metrology Light Source and ANKA”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPEA012, pp. 88-90. 
[n]	W. Lawson, B. Hogan, M. Castle, V. L. Granatstein, M. Reiser, and X. Xu, “Operation of High-Power 8.6 and 17.1 GHz Coaxial Gyroklystrons”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TU4100, pp. 639-641. 
[n]	C. A. Thomas, S. I. Bajlekov, R. Bartolini, N. Delerue, and G. Rehm, “Single Shot Emittance Measurement from Beam Size Measurement in a Drift Section”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPE080, pp. 1167-1169. 
[n]	M. N. June, J. L. Lovelady, and W. A. McFarlin, “An Integrated Ion Source Gas Control and Helium-3 Reovery System”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 106-108. 
[n]	L. Torino and U. Iriso, “Filling Pattern Measurements at ALBA using Time Correlated Single Photon Counting”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3644-3646. doi:10.18429/JACoW-IPAC2014-THPME162
[n]	K. J. Ruisard et al., “Design and Simulation of an Extraction Section for the University of Maryland Electron Ring”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWO073, pp. 1052-1054. 
[n]	A. V. Belov, N. Doinikov, A. E. Duke, V. V. Kokotkov, V. P. Kukhtin, and S. Sytchevsky, “TYPHOON Code for 3-D Eddy Currents Simulation in Conducting Thin Shells”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1324-1327. 
[n]	J. R. Ocampo et al., “Operational Experience with IOTs at Alba Synchrotron”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2372-2374. doi:10.18429/JACoW-IPAC2018-WEPMF002
[n]	O. A. Anderson et al., “The CCVV High-Current Megavolt-Range DC Accelerator”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1117-1120. 
[n]	C. P. Bailey et al., “First Results from the ISIS RFQ Test Stand”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP4A05, pp. 833-835. 
[n]	W. P. Lysenko and T. F. Wang, “Permanent-Magnet Quadrupoles in RFQ Linacs”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2582-2585. 
[n]	P. Van Vaerenbergh et al., “Stainless Steel Vacuum Chambers for the EBS Storage Ring”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 118-120. doi:10.18429/JACoW-MEDSI2018-TUPH35
[n]	S. Werin, F. Curbis, M. Eriksson, C. Quitmann, S. Thorin, and P. Johnsson, “Towards an X-ray FEL at the MAX IV Laboratory”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper TUP080, pp. 549-552. 
[n]	R. W. Assmann et al., “Requirements for the LHC Collimation System”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUAGB001, pp. 197-199. 
[n]	K. Nohara et al., “Studies on Innovative Production methods of HOM Coupler for SRF 9-cell Cavity”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2869-2872. doi:10.18429/JACoW-IPAC2015-WEPMA046
[n]	P. J. Chou, H.-P. Chang, C.-C. Kuo, W. T. Liu, and H.-J. Tsai, “Beam Lifetime and Collective Effects in Taiwan Photon Source”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC006, pp. 1992-1994. 
[n]	J. Conrad et al., “Upgrade of a UHV Furnace for 1700 C Heat Treatment and Processing of Niobium Samples”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3709-3711. doi:10.18429/JACoW-IPAC2016-THPMY024
[n]	K. Nishiyama et al., “FPGA Utilization in the Accelerator Interlock System (About the MPS Development in the LIPAc)”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper FPO019, pp. 201-203. 
[n]	K. Klopfer, W. Ackermann, and T. Weiland, “Eigenmode Computation for Ferrite-Loaded Cavity Resonators”, in Proc. ICAP'12, Rostock-Warnemunde, Germany, Aug. 2012, paper THACC2, pp. 250-252. 
[n]	S. Krishnagopal and S. A. Samant, “Mode-Stability in FEL Oscillators”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper TUPA05, pp. 219-221. 
[n]	J.-L. Vay, C. M. Celata, M. A. Furman, D. P. Grote, K. G. Sonnad, and M. Venturini, “Update on Electron-Cloud Simulations Using the Package WARP-POSINST”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5RFP078, pp. 4719-4721. 
[n]	R. Huang, Q. K. Jia, H. T. Li, and Z. Zhao, “The Preliminary Study of a Pre-Bunched Terahertz Free Electron Laser by a Velocity Bunching Scheme”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 477-480. doi:10.18429/JACoW-FEL2019-WEP063
[n]	C. Goffing, J. Keintzel, A.-S. Mueller, and F. Zimmermann, “Parallel Quadrupole Beam-Based Alignment for FCC-ee”, presented at the IPAC'26, Deauville, France, May 2026, paper WEP5037, unpublished. 
[n]	H.-E. Mahnke, “Invited Paper: Application of Heavy Ion Beams to Condensed Matter Studies”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper J-07, pp. 587-593. 
[n]	L. Dahl, “High-Intensity Low Energy Beam Transport Design Studies for the New Injector Linac of the UNILAC”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper MOP33, pp. 134-136. 
[n]	A. Dubrovskiy, B. N. Bathe, S. Srivastava, and F. Tecker, “Stabilization of the Beam Intensity in the Linac at the CTF3 CLIC Test Facility”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper MOPB032, pp. 243-245. 
[n]	G. Norman, O. Johansson, and D. Reistad, “Accelerating with Solid Core Magnets”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 881-884. 
[n]	A. D, A. Grudiev, V. F. Khan, W. Wuensch, and R. M. Jones, “Comparative Wakefield Analysis of a First Prototype of a DDS Structure for CLIC Main Linac”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC015, pp. 1024-1026. 
[n]	P. C. Chiu, K. T. Hsu, K. H. Hu, C. H. Kuo, and C. Y. Wu, “Fast Orbit Feedback Scheme and Implementation for Taiwan Photon Source”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUOCB202, pp. 1146-1148. 
[n]	C. I. Briegel and J. S. Diamond, “ACSys Camera Implementation Utilizing an Erlang Framework to C++ Interface”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THPPC066, pp. 1228-1230. 
[n]	A. G. Mathewson and D. Latorre, “The Vacuum Performance of the LEP CU Radiofrequency Cavity Assemblies”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1338-1341. 
[n]	B. Kulke, M. Caplan, and R. Stever, “250 GHz Cold Tests for the LLNL CARM Experiment”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 763-766. 
[n]	D. Trbojevic, D. Finley, R. Gerig, and S. Holmes, “Design Method for High Energy Accelerator Without Transition Energy”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1536-1539. 
[n]	T.-C. Yu et al., “Dual Chip in Single Module Solid-State Power Amplifier Design for Compact Transmitter Architecture”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUODB203, pp. 1158-1160. 
[n]	M. Arnold, T. Kuerzeder, N. Pietralla, and F. Hug, “Final Design and Status of the Third Recirculation for the S-DALINAC”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1717-1719. doi:10.18429/JACoW-IPAC2016-TUPOR026
[n]	Y.-M. Shin, K. Carlson, M. D. Church, V. D. Shiltsev, D. A. Still, and J. C. Tobin, “Crystal Channeling Acceleration Research for High Energy Linear Collider at ASTA Facility”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper MOPSO70, pp. 122-126. 
[n]	J. R. Calvey, C. M. Celata, J. A. Crittenden, G. Dugan, and M. A. Palmer, “Electron Cloud Modeling Considerations at CesrTA”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH5PFP047, pp. 3306-3308. 
[n]	A. B. Sefkow et al., “Extreme Compression of Heavy Ion Beam Pulses: Experiments and Modeling”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEZC02, pp. 2030-2034. 
[n]	S. A. Watson, G. R. Jennings, and D. C. Moir, “RF Phase Measurement at Phermex Using Time-To-Digital Converters”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1591-1593. 
[n]	F. Herbrand, “Use of Search Methods at Optical Elements of Linear Accelerator Systems for Ions”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP5A14, pp. 1835-1837. 
[n]	A. V. Smirnov et al., “Particle Accumulation with a Barrier Bucket RF System”, in Proc. COOL'09, Lanzhou, China, Aug.-Sep. 2009, paper TUM2MCIO02, pp. 67-70. 
[n]	U. Dorda et al., “The Dedicated Accelerator R&D Facility Sinbad at DESY”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 869-872. doi:10.18429/JACoW-IPAC2017-MOPVA012
[n]	J. N. Bai, S. Xiao, T. G. Xu, and L. Zeng, “The Development of Timing Control System for RFQ”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper THPB081, pp. 1014-1016. 
[n]	G. Stern et al., “Development and Validation of a Multipoint Based Laser Alignment System for CLIC”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPME045, pp. 3028-3030. 
[n]	M. J. Sigrist, D. G. Bilbrough, S. Chen, L. O. Dallin, and W. A. Wurtz, “Insertion Device Development at the Canadian Lightsource”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPD005, pp. 3090-3092. 
[n]	D. B?Âhne, “Status Report on the UNILAC-Project”, in Proc. LINAC'72, Los Alamos, NM, USA, Oct. 1972, paper B03, pp. 25-32. 
[n]	R. Perret, R. Jung, and R. Valbuena, “Design of a New Generation of Collimators for LEP 200”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2202-2205. 
[n]	I. Bylinsky et al., “TRIUMF ISAC RF System Improvements after 2 Years of Operational Experience”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAB040, pp. 1285-1287. 
[n]	S. Krishnagopal, S. A. Samant, D. Sarkar, P. Jha, and A. K. Upadhyay, “Study of Self-injection of an Electron Beam in a Laser-driven Plasma Cavity”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPZ025, pp. 2820-2822. 
[n]	B. L. Beaudoin, S. Bernal, I. Haber, R. A. Kishek, and T. W. Koeth, “Experimental Observations of a Multi-stream Instability in a Long Intense Beam”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEOAB103, pp. 2044-2046. 
[n]	A. Shnidman, R. C. Davidson, and I. Kaganovich, “Calculation of the Charge-changing Cross Sections of Ions or Atoms colliding with Fast Ions using the Classical Trajectory Method”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAS084, pp. 3678-3680. 
[n]	V. Soldatov et al., “Engineering Design and Fabrication of X-band Damped Detuned Structure for the CLIC Study”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC037, pp. 154-156. 
[n]	I. C. Sheng, C.-T. Chen, C. K. Kuan, and I. C. Yang, “Demagnetize Booster Chamber in TPS”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3225-3227. doi:10.18429/JACoW-IPAC2015-WEPHA049
[n]	Y. Liu, A. V. Aleksandrov, S. M. Cousineau, T. V. Gorlov, and A. Rakhman, “Sequential Excitation Scheme for Laser Stripping of Hydrogen Ion Beams”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3558-3560. doi:10.18429/JACoW-IPAC2019-THPMP049
[n]	P. Yu. Shatunov et al., “The Injection Septum Magnet for the Collector Ring (FAIR)”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1145-1147. doi:10.18429/JACoW-IPAC2016-TUPMB017
[n]	B. Lam et al., “ATF2 High Availability Power Supplies”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP127, pp. 3658-3660. 
[n]	S. F. Mikhailov, J. Y. Li, V. Popov, and Y. K. Wu, “Study of FEL Mirror Degradation at the Duke FEL and HIGS Facility”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPE060, pp. 2275-2277. 
[n]	Y.-H. Lin et al., “Data Acquisition and Monitoring for TPS SRF Module Horizontal Test”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPEA053, pp. 3264-3266. 
[n]	B. Mustapha, P. N. Ostroumov, M. A. Fraser, and A. Perry, “Simultaneous Acceleration of Radioactive and Stable Beams in the ATLAS Linac”, in Proc. HB'14, East Lansing, MI, USA, Nov. 2014, paper THO1AB01, pp. 334-339. 
[n]	S.A. Litvinov, A. Dolinskyy, K. Knie, I. Koop, P.Yu. Shatunov, I.M. Zemlyansky, “Ion-Optics of Antiproton Separator at FAIR”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. XX-XX. doi:10.18429/JACoW-IPAC2016-THPMR018
[n]	S. Krishnagopal and S. A. Samant, “Effect of mirror-tilt on the mode-structure in an oscillator FEL”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC085, pp. 3092-3094. 
[n]	A. A. Korepanov, A. Akimov, A. A. Pachkov, and A. Panov, “Pulse Power Supplies for Kicker Magnets of NSLS-2 Booster Ring”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWA027, pp. 720-722. 
[n]	T. Palchan et al., “Laser Ablation of Solids into an Electron Cyclotron Resonance Ion Sources for Accelerator Mass Spectroscopy”, in Proc. HIAT'12, Chicago, IL, USA, Jun. 2012, paper TUC03, pp. 149-154. 
[n]	Z. A. Conway et al., “Superconducting Cavity Cryomodules for Heavy-Ion Accelerators”, in Proc. HIAT'15, Yokohama, Japan, Sep. 2015, paper WEM1I01, pp. 163-165. 
[n]	M. J. Boland et al., “Plans for an Australian XFEL Using a CLIC X-band Linac”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3424-3426. doi:10.18429/JACoW-IPAC2014-THPME081
[n]	R. Thurman-Keup, S. De Santis, E. Lorman, T. Meyer, and S. Pordes, “Measurement of the Intensity of the Beam in the Abort Gap at the Tevatron Utilizing Synchrotron Light”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAT036, pp. 2440-2442. 
[n]	S. B. van der Geer, M. J. de Loos, W. H. Urbanus, and A. G. A. Verhoeven, “3D Design of the Fusion-FEM Depressed Collector using the General Particle Tracer (GPT) Code”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEP84, pp. 2462-2464. 
[n]	D. Prono et al., “High Average-Power Induction Linacs”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1441-1446. 
[n]	P. A. Bystrov, V. P. Filippovich, A. V. Prokopenko, S. N. Puchkov, and N. E. Rozanov, “Provision of Dose Homogeneity in Experiments for Developing Methods of Food Irradiation”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 236-239. doi:10.18429/JACoW-RUPAC2018-TUPSA45
[n]	N. S. Azaryan et al., “Dubna-Minsk SRF Technology Development Status Report”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWO042, pp. 2393-2395. 
[n]	X. Y. Liu, M. Bopp, M. M. Dehler, A. Scherer, and B. G. Sun, “Design of Resonant Stripline BPM for an IR-FEL Project at NSRL”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2665-2667. doi:10.18429/JACoW-IPAC2019-WEPGW080
[n]	S. I. Kukarnikov, V. K. Makoveev, and A. Yu. Molodozhentsev, “Design of the Dipole and Quadrupole Magnets of the PRAMES”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP03C, pp. 1213-1215. 
[n]	A. V. Prokopenko, V. P. Filippovich, A. Yu. Gracheova, N. V. Iluhina, A. V. Gordeev, and Y. S. Pavlov, “Regularities of Inhibition of Conditionally Pathogenic Microflora Under the Influence of Accelerated Electron Beams”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 243-245. doi:10.18429/JACoW-RUPAC2018-TUPSA47
[n]	M. G. Rao and P. Kneisel, “Thermal and Mechanical Properties of Electron Beam Welded and Heat-Treated Niobium for TESLA”, in Proc. SRF'93, Newport News, VA, USA, Oct. 1993, paper SRF93I11, pp. XX-XX. 
[n]	M. Bender, W. A. Assmann, and H. Kollmus, “Understanding of Ion Induced Desorption Using the ERDA Technique”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH173, pp. 1423-1425. 
[n]	W. Zhang et al., “Deep-Seated Cancer Treatment Spot-Scanning Control System”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPMS007, pp. 333-335. 
[n]	W. Zhan et al., “Radioactive Ion Beam Line in Lanzhou”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5E105, pp. 605-607. 
[n]	R. J. Macek and J. S. Kolski, “Understanding Beam Losses in High Intensity Proton Accumulator Rings”, in Proc. HB'14, East Lansing, MI, USA, Nov. 2014, paper TUO3LR01, pp. 192-197. 
[n]	J. F. Orrett, S. R. Buckley, P. A. Corlett, A. J. Moss, and S. Rains, “IOT Testing at the ERLP”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH153, pp. 1382-1384. 
[n]	F. Pedersen, “Effects of Highly Charged, Solid Microparticles Captured in Negatively Charged Circulating Beams”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1246-1249. 
[n]	V. S. Dyubkov, S. M. Polozov, and A. V. Samoshin, “Beam Envelope Control in Heavy Ion Superconducting Drift Tube Linac”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPE074, pp. 4689-4691. 
[n]	P. A. Bystrov, A. A. Kozlov, Y. S. Pavlov, I. Yakupov, A. V. Prokopenko, and N. E. Rozanov, “Radiation Installation and Accelerator UELV-10-10-C-70 Beam Parameters Control, Management and Registration System”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 472-474. doi:10.18429/JACoW-RUPAC2018-THPSC33

For LaTeX

Use Complete Form

For BibTeX

References

Back to search