JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	J. M. Thompson, W. Kozanecki, and A. Roodman, “Measurement of the Vertical Emittance and Beta Function at the PEP-II Interaction Point Using the BaBar Detector”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPE057, pp. 3387-3389. 
[n]	Y.-J. Chen, F. Chambers, A. C. Paul, J. A. Watson, and J. Weir, “Eliminating the Spot Dilution due to Kicker Switching in DARHT-II”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAG033, pp. 2960-2962. 
[n]	C. M. Ginsburg et al., “Diagnostic Instrumentation for the Fermilab Vertical Cavity Test Facility”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper TUP47, pp. XX-XX. 
[n]	M. Turenne, F. Hunte, R. P. Johnson, J. Schwartz, and H. Song, “Roebel Cable for High-field Low-loss Accelerator Magnets”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEB057, pp. 397-399. 
[n]	N. Chaisueb and S. Rimjaem, “Simulation and Optimization of Injector System for the Pre-bunched THz FEL”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 654-657. doi:10.18429/JACoW-FEL2019-THP031
[n]	K. L. Jensen, B. Pate, J. L. Shaw, J. E. Yater, and J. J. Petillo, “Modeling the Performance of a Diamond Current Amplifier for FELs”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THP205, pp. 2507-2509. 
[n]	P. A. E. Elkiaer, A. Jensen, C. Nielsen, and C. Soerensen, “Low Voltage Very High Current SCR Controlled Magnet Power Supply”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEB071, pp. 433-434. 
[n]	M. Leporis, V. Bekhterev, S. Bogomolov, A. Efremov, G. Gulbekian, and Yu. Kostyukhov, “THE NEW ION SOURCE DECRISÔÇô4 FOR THE SECOND PHASE OF”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper TUIP05, pp. XX-XX. 
[n]	Q. R. Marksteiner et al., “Using Off-Axis Undulator Radiation as a Longitudinal Electron-Beam Diagnostic”, presented at the NAPAC'22, Albuquerque, NM, USA, Aug. 2022, paper WEZD4, unpublished. 
[n]	H. Hanerfeld, W. Herrmannsfeldt, and R. H. Miller, “Higher Order Correlations in Computed Particle Distributions”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 880-883. 
[n]	Yu. G. Alenitsky et al., “Dubna Project of Cyclotron C250 for Proton Therapy Application”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper THPSC027, pp. 379-381. 
[n]	M. Valette et al., “Effect of Quench Heater and CLIQ Firing on the Circulating HL-LHC Beam”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2101-2104. doi:10.18429/JACoW-IPAC2017-TUPVA023
[n]	G. D. Alton et al., “Absolute Charge State Yields of 20 MeV I Ions Scattered from Argon and Xenon”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1685-1690. 
[n]	G. J. Caporaso et al., “High Gradient Induction Accelerator”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUYC02, pp. 857-861. 
[n]	J. Osborn, J. Tanabe, D. Yee, and F. Younger, “Design of the PEP-II Interaction Region Septum Quadrupole”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7P039, pp. 3321-3323. 
[n]	M. May, H. Edwards, M. Harrison, R. Isiminger, and J. Jagger, “Mechanical Design of Lambertson Magnets for Injection into the Energy Saver”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2842-2844. 
[n]	G. Brajnik et al., “Test and Measurements Results of the Pilot Tone Front End Industrialization for Elettra 2.0”, in Proc. IBIC'22, Kraków, Poland, Sep. 2022, pp. 51-54. doi:10.18429/JACoW-IBIC2022-MOP13
[n]	J. Allinger, G. Danby, B. DeVito, S. Hsieh, J. Jackson, and A. Prodell, “Studies of Performance and Field Reproducibility of a Precision 40 KG Superconducting Dipole Magnet”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 678-683. 
[n]	D. Malyutin et al., “Longitudinal Phase Space Tomography Using a Booster Cavity at the Photo Injector Test Facility at DESY, Zeuthen Site (PITZ)”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper MOPD09, pp. 161-164. 
[n]	N. P. Dikiy, A. N. Dovbnya, and V. I. Uvarov, “Development of New Electron Irradiation Based Technology for Technetium-99m Production”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP13C, pp. 2389-2394. 
[n]	X. Yang, K. Ha, V. V. Smaluk, Y. Tian, and L. Yu, “Multi-frequency AC LOCO: A Fast and Precise Technique for Lattice Correction”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 831-834. doi:10.18429/JACoW-IPAC2017-MOPIK125
[n]	T. Hirose et al., “Generation of Polarized Positrons via Laser-Compton Scattering at the KEK Damping Ring”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 4D050, pp. 202-204. 
[n]	G. H. Schroeder, J. Bonthond, U. Jansson, H. Kuhn, M. Mayer, and G. Vossenberg, “The Injection Kicker System of LEP”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1381-1384. 
[n]	J. C. Jan et al., “Design of a 3.5 T Superconducting Multipole Wiggler”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3564-3567. doi:10.18429/JACoW-IPAC2017-WEPVA127
[n]	V. S. Kashikhin et al., “Superconducting Magnet Performance in LCLS-II Cryomodules”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2693-2696. doi:10.18429/JACoW-IPAC2018-WEPML009
[n]	E. I. Simakov, C. Huang, T. J. Kwan, and D. Y. Shchegolkov, “Shaping Electron Bunches for Ultra-bright Electron Beam Acceleration in Dielectric Loaded Waveguides”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper TUPMA13, pp. 613-615. 
[n]	H. T. Li, J. Deng, S. Feng, M. Xia, and W. Xie, “Test of the Prototype Module of PTS”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6RFP068, pp. 1705-1707. 
[n]	C. Calvi, M. Bruegger, H. Joehri, and T. Schmidt, “SwissFEL U15 Magnet Assembly: First Experimental Results”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper THPD63, pp. 662-665. 
[n]	M. W. Bruker et al., “Electron Cooling using a Pulsed and Dithering beam from an Electrostatic Electron Cooler”, in Proc. COOL'21, Novosibirsk, Russia, Nov. 2021, paper P1008, pp. 81-84. 
[n]	E. Lee et al., “Lessons learned from hardware failure during HL-LHC AUP cabling”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2891-2894. doi:10.18429/JACoW-IPAC2024-WEPS80
[n]	G. Janser, “Digital Powersupply Controller Dataconcentrator DPCDC”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP073, pp. XX-XX. 
[n]	R. D. Porter et al., “Update on Nb3Sn Progress at Cornell University”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2479-2482. doi:10.18429/JACoW-IPAC2018-WEPMF050
[n]	T. Saeki, H. Hayano, T. Kubo, Y. Iwashita, and H. Oikawa, “Construction of Measurement System for Superconducting Characteristics on Thin-film Samples at KEK”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2167-2169. doi:10.18429/JACoW-IPAC2016-WEPMB021
[n]	M. Nordby, E. F. Daly, N. Kurita, and J. Langton, “A Zero-Length Bellows for the PEP-II High-Energy Ring”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPP08, pp. 2051-2053. 
[n]	G. Arnolds-Mayer and E. Chiaveri, “On A 500 MHz Single Cell Cavity with Nb3Sn Surface”, in Proc. SRF'87, Lemont, IL, USA, Sep. 1987, paper SRF87E03, pp. XX-XX. 
[n]	S. Rodriguez Esparza, I. Nesterenko, M. Hausmann, M. Patil, and S. Lidia, “Mechanical design of the thermal imaging system for the FRIB target”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2287-2290. doi:10.18429/JACoW-IPAC2024-WEPG36
[n]	A. Bosotti, D. Corti, C. Pagani, G. Varisco, F. Zibra, and M. Di Giacomo, “High Sensitivity Electronic System for the Phase Probes of the LNS/MILANO Superconducting Cyclotron”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper IXD-05, pp. 483-486. 
[n]	S. Ghosh, A. Mandal, U. Panda, S. Seth, and S. S. Som, “Testing of Inductive Output Tube based RF Amplifier for 650 MHz SRF Cavities”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper THPD21, pp. 187-189. 
[n]	K. M. Terwilliger et al., “Acceleration of Polarized Protons in the Brookhaven AGS”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2031-2034. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search