Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] N. Nakamura, K. Haga, T. Nogami, and M. Tadano, “Study of PF-Ring Infrastructure Improvements Using Temperature Measurements in the Ring Tunnel”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1508-1511. doi:10.18429/JACoW-IPAC2021-TUPAB063
[n] D. Leitner, J. Y. Benitez, T. J. Loew, C. M. Lyneis And D, and S. Todd, “Progress And Perspective For High Frequency, High Performance Superconducting Ecr Ion Sources”, in Proc. Cyclotrons'07, Giardini-Naxos, Italy, Oct. 2007, pp. 265-270.
[n] V. Palmieri, R. Preciso, V. L. Ruzinov, and S. Yu. Stark, “Seamless 1.5 GHz Cavities Obtained by Spinning a Circular Blank of Copper or Niobium”, in Proc. SRF'93, Newport News, VA, USA, Oct. 1993, paper SRF93I32, pp. XX-XX.
[n] P. A. Piminov, E. B. Levichev, C. Milardi, K. Ohmi, D. N. Shatilov, and M. Zobov, “Crab Waist Collision Scheme: Numerical Simulations versus Experimental Results”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6PFP049, pp. 2604-2606.
[n] L. Bex, “Review of Latest Developments of Ion Sources”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 252-257.
[n] F. Wang et al., “Linear Optics Calibration at the MIT-Bates South Hall Ring”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THP65, pp. 3101-3103.
[n] D. W. Storm, I. Ben-Zvi, and J. M. Brennan, “Superconducting Resonators for the University of Washington Booster Linac”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3607-3610.
[n] A. Bland and R. Rausch, “The Controls Achitecture and Equipment Access of LEP”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 860-863.
[n] O. Kugeler et al., “Investigation of Trapped Magnetic Flux in Superconducting Niobium Samples with Neutron Radiography”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 762-765. doi:10.18429/JACoW-SRF2017-THPB017
[n] T. Duda, C. Edelmann, and N. Marquardt, “A New Technique for Thin-Film Coating of Vacuum Vessels with Metal or Carbon Containing Non-Evaporable Getters”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP03E, pp. 2184-2186.
[n] Y. Suetsugu, “Vacuum System for High Power Lepton Rings”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper ROPB002, pp. 612-616.
[n] K. G. Panagiotidis and A. Wolski, “Alignment Sensitivities in the ILC Damping Rings”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMN075, pp. 2877-2879.
[n] J. Porter, “Cryogenic System for a Superconducting Spectrometer”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2909-2911.
[n] G. H. Gillespie, “A Graphic User Interface for the Particle Optics Code TRANSPORT”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper THP72, pp. 842-844.
[n] Y. Suetsugu, “Observation and Simulation of the Nonlinear Dependence of Vacuum Pressures on the Positron Beam Current at the KEKB”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH043, pp. 2183-2185.
[n] P. Smith, D. Christiansen, P. Greninger, and G. Spalek, “Automated Design of Coupled RF Cavities Using 2-D and 3-D Codes”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPAH114, pp. 3114-3116.
[n] R. Krevitt, “Remote Maintenance Techniques Proposed for the 200-GeV Accelerator”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 997-1004.
[n] P. Cohilis and Y. Jongen, “High Beam Intensities for Cyclotron-Based Radioisotope Production”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP075G, pp. 2671-2673.
[n] J. Kamiya and K. Yamamoto, “Operation Status of J-PARC Rapid Cycling Synchrotron”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2020-2023. doi:10.18429/JACoW-IPAC2019-TUPTS036
[n] D. M. Vilsmeier, P. Forck, and M. Sapinski, “A Modular Application for IPM Simulations”, in Proc. IBIC'17, Grand Rapids, MI, USA, Aug. 2017, pp. 355-358. doi:10.18429/JACoW-IBIC2017-WEPCC07
[n] N. Marquardt, “DELTA, a Low-Emittance Storage Ring as Free-Electron-Laser Radiation Source”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 780-783.
[n] F. Naito et al., “Coupling Cavity Damper for the ARES”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4P031, pp. 2977-2979.
[n] T. Garvey, G. Geschonke, and W. Schnell, “A Radio-Frequency Transfer Structure for the CERN Linear Collider”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 100-103.
[n] B. Yu. Bogdanovich et al., “THE OUTPUT BEAM-LINE AND A NOVEL ION SOURCE OF 2-MEV PROTON RFQ LINAC”, in Proc. RuPAC'08, Zvenigorod, Russia, Sep.-Oct. 2008, paper THAPH03, pp. XX-XX.
[n] M. M. Holland, J. M. Brennan, R. C. Cohen, I. S. Hammerman, and E. J. Martin, “Design of Secondary Beam Channels for the Nevis Synchrocyclotroyn Conversion Program”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 787-792.
[n] K. Furukawa, “KEKB Injection Developments”, in Proc. eeFACT'18, Hong Kong, China, Sep. 2018, pp. 121. doi:10.18429/JACoW-eeFACT2018-TUPAB01
[n] Y. Ohnishi, H. Koiso, A. Morita, K. Ohmi, H. Sugimoto, and K. Oide, “Off-momentum Optics at SuperKEKB”, in Proc. eeFACT'18, Hong Kong, China, Sep. 2018, pp. 71. doi:10.18429/JACoW-eeFACT2018-TUOBB02
[n] P. B. Wilson, T. Raubenheimer, and R. D. Ruth, “RF System for a 30 GHz, 5 TeV Linear Collider Based on Conventional Technology”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2W017, pp. 605-607.
For LaTeX
Use Complete Form
For BibTeX
References
- N. Nakamura, K. Haga, T. Nogami, and M. Tadano, “Study of PF-Ring Infrastructure Improvements Using Temperature Measurements in the Ring Tunnel”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 1508-1511.
- D. Leitner, J. Y. Benitez, T. J. Loew, C. M. Lyneis And D, and S. Todd, “Progress And Perspective For High Frequency, High Performance Superconducting Ecr Ion Sources”, in Proc. 18th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'07), Giardini-Naxos, Italy, Oct. 2007, pp. 265-270.
- V. Palmieri, R. Preciso, V. L. Ruzinov, and S. Yu. Stark, “Seamless 1.5 GHz Cavities Obtained by Spinning a Circular Blank of Copper or Niobium”, in Proc. 6th Int. Conf. RF Superconductivity (SRF'93), Newport News, VA, USA, Oct. 1993, paper SRF93I32, pp. XX-XX.
- P. A. Piminov, E. B. Levichev, C. Milardi, K. Ohmi, D. N. Shatilov, and M. Zobov, “Crab Waist Collision Scheme: Numerical Simulations versus Experimental Results”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6PFP049, pp. 2604-2606.
- L. Bex, “Review of Latest Developments of Ion Sources”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 252-257.
- F. Wang et al., “Linear Optics Calibration at the MIT-Bates South Hall Ring”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THP65, pp. 3101-3103.
- D. W. Storm, I. Ben-Zvi, and J. M. Brennan, “Superconducting Resonators for the University of Washington Booster Linac”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3607-3610.
- A. Bland and R. Rausch, “The Controls Achitecture and Equipment Access of LEP”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 860-863.
- O. Kugeler et al., “Investigation of Trapped Magnetic Flux in Superconducting Niobium Samples with Neutron Radiography”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 762-765.
- T. Duda, C. Edelmann, and N. Marquardt, “A New Technique for Thin-Film Coating of Vacuum Vessels with Metal or Carbon Containing Non-Evaporable Getters”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP03E, pp. 2184-2186.
- Y. Suetsugu, “Vacuum System for High Power Lepton Rings”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper ROPB002, pp. 612-616.
- K. G. Panagiotidis and A. Wolski, “Alignment Sensitivities in the ILC Damping Rings”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMN075, pp. 2877-2879.
- J. Porter, “Cryogenic System for a Superconducting Spectrometer”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2909-2911.
- G. H. Gillespie, “A Graphic User Interface for the Particle Optics Code TRANSPORT”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper THP72, pp. 842-844.
- Y. Suetsugu, “Observation and Simulation of the Nonlinear Dependence of Vacuum Pressures on the Positron Beam Current at the KEKB”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH043, pp. 2183-2185.
- P. Smith, D. Christiansen, P. Greninger, and G. Spalek, “Automated Design of Coupled RF Cavities Using 2-D and 3-D Codes”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPAH114, pp. 3114-3116.
- R. Krevitt, “Remote Maintenance Techniques Proposed for the 200-GeV Accelerator”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 997-1004.
- P. Cohilis and Y. Jongen, “High Beam Intensities for Cyclotron-Based Radioisotope Production”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP075G, pp. 2671-2673.
- J. Kamiya and K. Yamamoto, “Operation Status of J-PARC Rapid Cycling Synchrotron”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2020-2023.
- D. M. Vilsmeier, P. Forck, and M. Sapinski, “A Modular Application for IPM Simulations”, in Proc. 6th Int. Beam Instrumentation Conf. (IBIC'17), Grand Rapids, MI, USA, Aug. 2017, pp. 355-358.
- N. Marquardt, “DELTA, a Low-Emittance Storage Ring as Free-Electron-Laser Radiation Source”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 780-783.
- F. Naito et al., “Coupling Cavity Damper for the ARES”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 4P031, pp. 2977-2979.
- T. Garvey, G. Geschonke, and W. Schnell, “A Radio-Frequency Transfer Structure for the CERN Linear Collider”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 100-103.
- B. Yu. Bogdanovich et al., “THE OUTPUT BEAM-LINE AND A NOVEL ION SOURCE OF 2-MEV PROTON RFQ LINAC”, in Proc. 21st Russian Particle Accelerator Conf. (RuPAC'08), Zvenigorod, Russia, Sep.-Oct. 2008, paper THAPH03, pp. XX-XX.
- M. M. Holland, J. M. Brennan, R. C. Cohen, I. S. Hammerman, and E. J. Martin, “Design of Secondary Beam Channels for the Nevis Synchrocyclotroyn Conversion Program”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 787-792.
- K. Furukawa, “KEKB Injection Developments”, in Proc. 62nd ICFA Advanced Beam Dynamics Workshop on High Luminosity Circular e+e- Colliders (eeFACT'18), Hong Kong, China, Sep. 2018, pp. 121.
- Y. Ohnishi, H. Koiso, A. Morita, K. Ohmi, H. Sugimoto, and K. Oide, “Off-momentum Optics at SuperKEKB”, in Proc. 62nd ICFA Advanced Beam Dynamics Workshop on High Luminosity Circular e+e- Colliders (eeFACT'18), Hong Kong, China, Sep. 2018, pp. 71.
- P. B. Wilson, T. Raubenheimer, and R. D. Ruth, “RF System for a 30 GHz, 5 TeV Linear Collider Based on Conventional Technology”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 2W017, pp. 605-607.
Back to search