Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] V. P. Yakovlev et al., “Status of the SRF Development for the Project X”, in Proc. SRF'13, Paris, France, Sep. 2013, paper MOP015, pp. 117-122.
[n] A. Valishev, G. Annala, V. A. Lebedev, and R. S. Moore, “Correction of Second Order Chromaticity at Tevatron”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMS015, pp. 3922-3924.
[n] E. Pozdeyev, F. Marti, J. A. Rodriguez, and R. C. York, “Space Charge Effect in Isochronous Rings”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper WGA30, pp. 157-164.
[n] Y. S. Cho et al., “A 350 MHz CW RFQ Linac for the KOMAC/KTF”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP4A16, pp. 812-814.
[n] H. Guler et al., “XFEL Couplers RF Conditioning at LAL”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2125-2127. doi:10.18429/JACoW-IPAC2016-WEPMB006
[n] K. Dahlerup-Petersen, B. Kazmine, V. Popov, V. Sytchev, L. Vassiliev, and V. Zubko, “Energy Extraction Resistors for the Main Dipole and Quadrupole Circuits of the LHC”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP1B09, pp. 2420-2422.
[n] G. T. Danby and J. W. Jackson, “Theory, Design and Measurement of the Brookhaven Narrow Quadrupoles”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 414-420.
[n] G. Portmann and D. Robin, “Beam Based Alignment Of C-Shaped Quadrupole Magnets”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP45C, pp. 620-622.
[n] R. Pardo, L. M. Bollinger, and W. Henning, “Longitudinal Beam Optimization of the Argonne Superconducting Heavy-Ion Linear Accelerator”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper H05, pp. 270-273.
[n] J. Mammosser et al., “Status of the Production Electropolishing System at JLAB”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAB062, pp. 2860-2862.
[n] S. S. Gilardoni, F. Franchi, and M. Giovannozzi, “Adiabaticity and Reversibility Studies for Beam Splitting Using Stable Resonances”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC051, pp. 3095-3097.
[n] A. V. Eliseev et al., “Dynamics of 197Au78+ Ions Generated in Recombination with Cooling Electrons in the NICA Collider”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper MOPPA016, pp. 275-277.
[n] K. Li et al., “A Project of Tandem Accelerator Mass Spectrometry Facility at Peking University”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1471-1474.
[n] G. Swift, M. Johnson, and V. N. Litvinenko, “Duke FEL Lab Storage Ring ARC Vacuum System Upgrade”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH038, pp. 2171-2173.
[n] S. A. Kahn, M. A. Cummings, E. Z. Barzi, D. Turrioni, S. Falletta, and A. Kikuchi, “Nb3Sn Thin Films for the Production of Higher Gradient SRF Cavities at Reduced Cost”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3716-3719. doi:10.18429/JACoW-IPAC2018-THPAL036
[n] J. M. Bogaty, B. E. Clifft, and R. C. Pardo, “A Very Wide Bandwidth Faraday Cup Suitable for Measuring Gigahertz Structure on Ion Beams with Velocities Down to < 0.01”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TU457, pp. 465-467.
[n] M. Pieck et al., “LANSCE Control System Front-End and Infrastructure Hardware Upgrades”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPMS010, pp. 343-346.
[n] R. Althaus et al., “Performance of Dipole Magnets in Helium II”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3280-3283.
[n] P. Van Arsdall et al., “The National Ignition Facility: Status of the Integrated Computer Control System”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper MO102, pp. XX-XX.
[n] S. Baturin, A. Altmark, I. L. Sheynman, and A. Kanareykin, “Parameter Optimization of a Rectangular Dielectric Based Wakefield Accelerating Structure”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper MOPPA008, pp. 260-262.
[n] K. B. Scheidt and F. Epaud, “Installation and Commissioning of a Complete Upgrade of the BPM System for the ESRF Storage Ring”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper MOPD05, pp. 50-52.
[n] F. J. Decker, D. Farkas, L. Rinolfi, and J. Truher, “Reducing Energy Spread for Long Bunch Train at SLAC”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP124G, pp. 828-830.
[n] D. Berkaev et al., “VEPP-2000 ELECTRON-POSITRON COLLIDER COMMISSIONING”, in Proc. Factories'08, Novosibirsk, Russia, Apr. 2008, paper TUACH03, pp. XX-XX.
[n] D. Stout et al., “Systems Engineering and Integration on the FRIB Project”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPMA08, pp. 312-314.
[n] V. Khodnevych et al., “Study of a Smith-Purcell Radiation-Based Longitudinal Profile Monitor at the CLIO Free Electron Laser”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 132-134. doi:10.18429/JACoW-IPAC2017-MOPAB026
[n] F. M. Esser et al., “Development Work for a Short Curved Superconducting Dipole Magnet for the HESR at FAIR”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPD011, pp. 2425-2427.
[n] D. Reagan and T. E. Hostetler, “An Electron Beam Spectrum Monitor using Synchrotron Light”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3297-3300.
[n] A. Galat?â et al., “ADIGE: The Radioactive Ion Beam Injector of the SPES Project”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2281-2283. doi:10.18429/JACoW-IPAC2017-TUPVA087
[n] C. J. R. Duncan, P. Cueva, J. M. Maxson, and D. A. Muller, “Improving Energy Resolution and Compensating Chromatic Aberration With a TM010 Microwave Cavity”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 411-413. doi:10.18429/JACoW-NAPAC2019-TUPLM18
[n] W. Hassenzahl, “A Comparison of the Costs of Superconducting Accelerator Dipoles Using NbTi, NB 3Sn and NbTiTa”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3277-3280.
[n] H. Brown et al., “Design, Fabrication and Testing of the BNL Radio Frequency Quadrupole Accelerator”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper MOB0007, pp. 65-67.
[n] W. V. Hassenzahl, E. Hoyer, and R. Savoy, “Design and Test of a Model Pole for the ALS U5.0 Undulator”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2736-2739.
[n] T. Itahashi, Y. Fujita, T. Fukuda, T. Shimoda, T. Yamagata, and Y. Nagame, “Mass Spectrometry of 41Ca with RCNP AVF Cyclotron”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper K-19, pp. 664-666.
For LaTeX
Use Complete Form
For BibTeX
References
- V. P. Yakovlev et al., “Status of the SRF Development for the Project X”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper MOP015, pp. 117-122.
- A. Valishev, G. Annala, V. A. Lebedev, and R. S. Moore, “Correction of Second Order Chromaticity at Tevatron”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRPMS015, pp. 3922-3924.
- E. Pozdeyev, F. Marti, J. A. Rodriguez, and R. C. York, “Space Charge Effect in Isochronous Rings”, in Proc. 42nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'08), Nashville, TN, USA, Aug. 2008, paper WGA30, pp. 157-164.
- Y. S. Cho et al., “A 350 MHz CW RFQ Linac for the KOMAC/KTF”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP4A16, pp. 812-814.
- H. Guler et al., “XFEL Couplers RF Conditioning at LAL”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2125-2127.
- K. Dahlerup-Petersen, B. Kazmine, V. Popov, V. Sytchev, L. Vassiliev, and V. Zubko, “Energy Extraction Resistors for the Main Dipole and Quadrupole Circuits of the LHC”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP1B09, pp. 2420-2422.
- G. T. Danby and J. W. Jackson, “Theory, Design and Measurement of the Brookhaven Narrow Quadrupoles”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 414-420.
- G. Portmann and D. Robin, “Beam Based Alignment Of C-Shaped Quadrupole Magnets”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP45C, pp. 620-622.
- R. Pardo, L. M. Bollinger, and W. Henning, “Longitudinal Beam Optimization of the Argonne Superconducting Heavy-Ion Linear Accelerator”, in Proc. 1981 Linear Accelerator Conf. (LINAC'81), Santa Fe, NM, USA, Oct. 1981, paper H05, pp. 270-273.
- J. Mammosser et al., “Status of the Production Electropolishing System at JLAB”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPAB062, pp. 2860-2862.
- S. S. Gilardoni, F. Franchi, and M. Giovannozzi, “Adiabaticity and Reversibility Studies for Beam Splitting Using Stable Resonances”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPC051, pp. 3095-3097.
- A. V. Eliseev et al., “Dynamics of 197Au78+ Ions Generated in Recombination with Cooling Electrons in the NICA Collider”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper MOPPA016, pp. 275-277.
- K. Li et al., “A Project of Tandem Accelerator Mass Spectrometry Facility at Peking University”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1471-1474.
- G. Swift, M. Johnson, and V. N. Litvinenko, “Duke FEL Lab Storage Ring ARC Vacuum System Upgrade”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH038, pp. 2171-2173.
- S. A. Kahn, M. A. Cummings, E. Z. Barzi, D. Turrioni, S. Falletta, and A. Kikuchi, “Nb3Sn Thin Films for the Production of Higher Gradient SRF Cavities at Reduced Cost”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3716-3719.
- J. M. Bogaty, B. E. Clifft, and R. C. Pardo, “A Very Wide Bandwidth Faraday Cup Suitable for Measuring Gigahertz Structure on Ion Beams with Velocities Down to < 0.01”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TU457, pp. 465-467.
- M. Pieck et al., “LANSCE Control System Front-End and Infrastructure Hardware Upgrades”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPMS010, pp. 343-346.
- R. Althaus et al., “Performance of Dipole Magnets in Helium II”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3280-3283.
- P. Van Arsdall et al., “The National Ignition Facility: Status of the Integrated Computer Control System”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper MO102, pp. XX-XX.
- S. Baturin, A. Altmark, I. L. Sheynman, and A. Kanareykin, “Parameter Optimization of a Rectangular Dielectric Based Wakefield Accelerating Structure”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper MOPPA008, pp. 260-262.
- K. B. Scheidt and F. Epaud, “Installation and Commissioning of a Complete Upgrade of the BPM System for the ESRF Storage Ring”, in Proc. 9th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'09), Basel, Switzerland, May 2009, paper MOPD05, pp. 50-52.
- F. J. Decker, D. Farkas, L. Rinolfi, and J. Truher, “Reducing Energy Spread for Long Bunch Train at SLAC”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP124G, pp. 828-830.
- D. Berkaev et al., “VEPP-2000 ELECTRON-POSITRON COLLIDER COMMISSIONING”, in Proc. 40th ICFA Advanced Beam Dynamics Workshop on High Luminosity e+e- Factories (Factories'08), Novosibirsk, Russia, Apr. 2008, paper TUACH03, pp. XX-XX.
- D. Stout et al., “Systems Engineering and Integration on the FRIB Project”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPMA08, pp. 312-314.
- V. Khodnevych et al., “Study of a Smith-Purcell Radiation-Based Longitudinal Profile Monitor at the CLIO Free Electron Laser”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 132-134.
- F. M. Esser et al., “Development Work for a Short Curved Superconducting Dipole Magnet for the HESR at FAIR”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPD011, pp. 2425-2427.
- D. Reagan and T. E. Hostetler, “An Electron Beam Spectrum Monitor using Synchrotron Light”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3297-3300.
- A. Galat?â et al., “ADIGE: The Radioactive Ion Beam Injector of the SPES Project”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2281-2283.
- C. J. R. Duncan, P. Cueva, J. M. Maxson, and D. A. Muller, “Improving Energy Resolution and Compensating Chromatic Aberration With a TM010 Microwave Cavity”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 411-413.
- W. Hassenzahl, “A Comparison of the Costs of Superconducting Accelerator Dipoles Using NbTi, NB 3Sn and NbTiTa”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3277-3280.
- H. Brown et al., “Design, Fabrication and Testing of the BNL Radio Frequency Quadrupole Accelerator”, in Proc. 1984 Linear Accelerator Conf. (LINAC'84), Seeheim, Germany, May 1984, paper MOB0007, pp. 65-67.
- W. V. Hassenzahl, E. Hoyer, and R. Savoy, “Design and Test of a Model Pole for the ALS U5.0 Undulator”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2736-2739.
- T. Itahashi, Y. Fujita, T. Fukuda, T. Shimoda, T. Yamagata, and Y. Nagame, “Mass Spectrometry of 41Ca with RCNP AVF Cyclotron”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper K-19, pp. 664-666.
Back to search