Favourites
For Word
[n] N. Bazin et al., “Status of the IFMIF LIPAc SRF Linac”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 74-77. doi:10.18429/JACoW-SRF2017-MOPB012
[n] R. Kersevan, “Status of the ESRF Vacuum System”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP03C, pp. 2178-2180.
[n] G. Franzini et al., “Final Design and Features of the B-train System of CNAO”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEB079, pp. 2878-2880.
[n] P. Chevtsov and M. G. Tiefenback, “Beam Emittance Measurement Tool for CEBAF Operations”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper MOZ03, pp. 25-27.
[n] G. Iadarola, B. Bradu, P. Dijkstal, L. Mether, and G. Rumolo, “Impact and Mitigation of Electron Cloud Effects in the Operation of the Large Hadron Collider”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2085-2088. doi:10.18429/JACoW-IPAC2017-TUPVA019
[n] Y. Aoki et al., “Experimental Results of a Photocathode RF Gun driven by a Stabilized All-Solid ps Laser”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP5A14, pp. 1678-1680.
[n] G. Torrisi et al., “Microwave Injection and Coupling Optimization in ECR and MDIS Ion Sources”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1724-1726. doi:10.18429/JACoW-IPAC2017-TUPIK021
[n] S. Aronson, F. Caspers, H. Haseroth, J. Knott, and W. Willis, “Model Measurements for the Switched Power Linac”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 121-124.
[n] K. M. Krushelnick et al., “Electron Acceleration Experiments Using the Hercules Laser System at the University of Michigan”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEC011, pp. 4074-4076.
[n] M. Hoffmann et al., “Operation of Normal Conducting RF Guns with MicroTCA.4”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 841-843. doi:10.18429/JACoW-IPAC2015-MOPHA028
[n] S. Strokov, G. Kube, M. Lantschner, and D. Lipka, “First measurements of a prototype stripline BPM for PETRA IV comparison with simulation”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 680-684. doi:10.18429/JACoW-IBIC2025-WEPCO26
[n] R. M. Bodenstein, Y. Roblin, and M. G. Tiefenback, “Real Beam Line Optics from a Synthetic Beam”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPE050, pp. 4629-4631.
[n] D. O. Calcoen, S. Gabourin, and A. P. Siemko, “CERN Beam Interlock Redundant Dump Trigger Module Performance during LHC Run 2”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 4189-4191. doi:10.18429/JACoW-IPAC2016-THPOY041
[n] M. G. Abbott and T. M. Cobb, “An EPICS IOC Builder”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPMU032, pp. 506-509.
[n] M. J. Furseman et al., “Adopting and Adapting Control System Studio at Diamond Light Source”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 1032-1035. doi:10.18429/JACoW-ICALEPCS2015-WEPGF137
[n] A. Endo, K. Sakaue, M. Washio, and H. Mizoguchi, “Optimization of High Average Power FEL Beam for EUV Lithography Application”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper FRA04, pp. 990-992.
For LaTeX
Use Complete Form
For BibTeX
References
- N. Bazin et al., “Status of the IFMIF LIPAc SRF Linac”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 74-77.
- R. Kersevan, “Status of the ESRF Vacuum System”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP03C, pp. 2178-2180.
- G. Franzini et al., “Final Design and Features of the B-train System of CNAO”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEB079, pp. 2878-2880.
- P. Chevtsov and M. G. Tiefenback, “Beam Emittance Measurement Tool for CEBAF Operations”, in Proc. 7th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'08), Ljbuljana, Slovenia, Oct. 2008, paper MOZ03, pp. 25-27.
- G. Iadarola, B. Bradu, P. Dijkstal, L. Mether, and G. Rumolo, “Impact and Mitigation of Electron Cloud Effects in the Operation of the Large Hadron Collider”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2085-2088.
- Y. Aoki et al., “Experimental Results of a Photocathode RF Gun driven by a Stabilized All-Solid ps Laser”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper MOP5A14, pp. 1678-1680.
- G. Torrisi et al., “Microwave Injection and Coupling Optimization in ECR and MDIS Ion Sources”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1724-1726.
- S. Aronson, F. Caspers, H. Haseroth, J. Knott, and W. Willis, “Model Measurements for the Switched Power Linac”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 121-124.
- K. M. Krushelnick et al., “Electron Acceleration Experiments Using the Hercules Laser System at the University of Michigan”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEC011, pp. 4074-4076.
- M. Hoffmann et al., “Operation of Normal Conducting RF Guns with MicroTCA.4”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 841-843.
- S. Strokov, G. Kube, M. Lantschner, and D. Lipka, “First measurements of a prototype stripline BPM for PETRA IV comparison with simulation”, in Proc. 14th International Beam Instrumentation Conference (IBIC'25), Liverpool, UK, Sep. 2025, pp. 680-684.
- R. M. Bodenstein, Y. Roblin, and M. G. Tiefenback, “Real Beam Line Optics from a Synthetic Beam”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPE050, pp. 4629-4631.
- D. O. Calcoen, S. Gabourin, and A. P. Siemko, “CERN Beam Interlock Redundant Dump Trigger Module Performance during LHC Run 2”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 4189-4191.
- M. G. Abbott and T. M. Cobb, “An EPICS IOC Builder”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPMU032, pp. 506-509.
- M. J. Furseman et al., “Adopting and Adapting Control System Studio at Diamond Light Source”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 1032-1035.
- A. Endo, K. Sakaue, M. Washio, and H. Mizoguchi, “Optimization of High Average Power FEL Beam for EUV Lithography Application”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper FRA04, pp. 990-992.
Back to search