JaCoW Logo

Reference Search

Favourites


For Word

[n]	E. D. Courant, “A Study of Possible Deuteron Acceleration”, in Proc. LINAC'62, Long Island, NY, USA, Aug. 1962, paper D-01, pp. 289-293. 
[n]	I. Chaikovska, C. Bruni, S. Chanc?®, A. R. Gamelin, H. Monard, and A. Loulergue, “Status of the Preparation to the Commissioning of the ThomX Storage Ring”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 833-836. doi:10.18429/JACoW-IPAC2016-MOPOW052
[n]	T. Garvey et al., “ELYSE - An Intense Electron Linac for Pulsed Radiolysis Research”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THBLA003, pp. 254-256. 
[n]	A. Harvey and S. A. Walker, “Mineral-Insulated Magnets for High-Radiation Environments”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 611-613. 
[n]	U. Hahn et al., “Design and Tests of a New Microwave Beam Position Monitor for the Undulator of the TTF-FEL”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP40G, pp. 1541-1543. 
[n]	G. Meister, R. Nabbi, and S. A. Martin, “On Optimization of Collimator Systems Used for Control of Beam Losses in Linear Accelerators”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper THP0026, pp. 397-399. 
[n]	G. De Ninno et al., “Injection and FEL Lasing with Front End Open at ELETTRA”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAG019, pp. 2309-2311. 
[n]	J. Escallier et al., “Technology Development for React and Wind Common Coil Magnets”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TOAB011, pp. 214-216. 
[n]	F. F. Bertinelli et al., “Design and Fabrication of Superfluid Helium Heat Exchanger Tubes for the LHC Superconducting Magnets”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT010, pp. 1837-1839. 
[n]	J. M. Mosthaf, S. Hanke, A. Peters, and S. Stumpf, “Using Wordpress as a Simple and Reliable Electronic Logbook for the Heidelberg Ion-Beam Therapy Centre (HIT) Accelerator Control System”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THP111, pp. 892-894. 
[n]	I. V. Bazarov, I. Senderovich, and C. K. Sinclair, “Use of Multiobjective Evolutionary Algorithms in High Brightness Electron Source Design”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAP031, pp. 2188-2190. 
[n]	E. D. Courant, “Some Thoughts on Low-Velocity Traveling Waves”, in Proc. LINAC'62, Long Island, NY, USA, Aug. 1962, paper B-10, pp. 171-173. 
[n]	J. P. Wozniak, S. Deghaye, and G. Kruk, “New Wave of Component Reuse with Spring Framework - AP Case Study”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEA004, pp. 367-369. 
[n]	R. C. Pardo et al., “Early Operational Experience with Uranium Beams at ATLAS (Oral Poster)”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TU-74, pp. 538-540. 
[n]	Y. Divin et al., “A Hilbert Transform Spectrometer using a High Tc Josephson Junction for Bunch Length Measurements at the TTF Linac”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP39G, pp. 1509-1511. 
[n]	H. Ma, A. Nassiri, T. L. Smith, Y. Sun, L. R. Doolittle, and A. Ratti, “An Internet Rack Monitor-Controller for APS LINAC RF Electronics Upgrade”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 314-316. doi:10.18429/JACoW-NAPAC2016-TUPOA14
[n]	A. Chabert, F. Loyer, and J. Sauret, “Beam Tuning and Stabilization Using Beam Phase Measurements at GANIL”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper M04, pp. 559-562. 
[n]	J. T. M. Lyles et al., “Design, Test and Implementation of New 201.25 MHz Power Amplifier for the LANSCE Linac”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPC069, pp. 3446-3448. 
[n]	C. Liu et al., “Reducing Spin Tune Spread by Matching DX Prime at Snakes in RHIC”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPWO074, pp. 2030-2032. 
[n]	G. Torrisi et al., “Design of a Microwave Frequency Sweep Interferometer for Plasma Density Measurements in ECR Ion Sources”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2512-2514. doi:10.18429/JACoW-IPAC2015-WEPWA012
[n]	R. Lorenz et al., “First Operating Experiences of Beam Position Monitors in the TESLA Test Facility Linac”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9P090, pp. 2137-2139. 
[n]	S. Matthies, H. Br?ñuning, A. Schwinn, and S. Deghaye, “FESA3 Integration in GSI for FAIR”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper WPO006, pp. 43-45. 
[n]	J. Skupin, B. Faatz, Y. Li, J. Pflueger, and T. Vielitz, “Undulator Demagnetization due to Radiation Losses at FLASH”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC129, pp. 2308-2310. 
[n]	A. Santamar?¡a Garc?¡a et al., “Study of the Transverse Emittance Blow-Up Along the Proton Synchrotron Booster Cycle During Wire Scanner Operation”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1110-1113. doi:10.18429/JACoW-IPAC2019-MOPTS101
[n]	P. Bertrand et al., “SPIRAL Facility at GANIL: Ion Beam Simulation and Optimisation Method for the CIME Cyclotron Injection System”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper G-03, pp. 458-461. 
[n]	A. Harvey, F. P. Blackstein, A. J. Otter, and W. A. Wolfe, “Accelerator Magnet Development at CRNL”, in Proc. LINAC'68, Long Island, NY, USA, May 1968, paper A-4, pp. 41-51. 
[n]	M. El Khaldi et al., “The RF System of Thomx”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 551-553. doi:10.18429/JACoW-LINAC2016-TUPLR040
[n]	J. Friedrich et al., “Performance of the GSI HLI-RFQ”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TH4-03, pp. 609-611. 
[n]	I. Martel et al., “ECOS-LINCE: A High Intensity Multi-ion Superconducting Linac for Nuclear Structure and Reactions”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3301-3303. doi:10.18429/JACoW-IPAC2014-THPME036
[n]	A. Citterio, M. Aiba, and R. Zennaro, “Long Range Wakefields in the SwissFEL C-band Linac”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPS076, pp. 781-783. 
[n]	J. R. Hunt, C. Carli, B. Dupuy, D. Gamba, J. Resta-L??pez, and C. P. Welsch, “Emittance Evolution of Low Energy Antiproton Beams in the Presence of Deceleration and Cooling”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2697-2700. doi:10.18429/JACoW-IPAC2019-WEPGW090
[n]	N. Angert et al., “Commissioning and First Operation Experience of the New Heavy Ion Injector of the UNILAC”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 167-170. 
[n]	M. M. Shehab and G. Vignola, “Mechanical Design Considerations for Sesame Main Subsystems”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAN047, pp. 263-265. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search