Favourites
For Word
[n] H. Podlech et al., “Conceptual Design of the Proton LINAC for the High Brilliance Neutron Source HBS”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 910-913. doi:10.18429/JACoW-IPAC2019-MOPTS027
[n] B. A. Frolov and V. S. Klenov, “Comparative Research of Low Energy Beam Transport Systems for H-minus Ion Beam”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 333-335. doi:10.18429/JACoW-RUPAC2016-TUPSA061
[n] E. Chishiro et al., “A Conceptual Design of RF System in the NSP Superconducting Linac at JAERI”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TH4068, pp. 923-925.
[n] S. Kazakov et al., “Development of an L-band Ferroelectric Phase Shifter”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP073, pp. 955-957.
[n] M. Kwiatkowski and B. Todd, “Dependable Design Flow for Protection Systems using Programmable Logic Devices”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEMMU010, pp. 706-709.
[n] S. O. Schriber, L. W. Funk, S. B. Hodge, and R. M. Hutcheon, “Experimental Measurements on a 25 MeV Reflexotron”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1061-1064.
[n] W. Kalbreier, A. Knezovic, G. Loehr, W. C. Middelkoop, P. Sievers, and A. Warman, “Target Stations and Beam Dumps for the CERN SPS”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1568-1571.
[n] L. Maci?â, J. J. Casas, C. Colldelram, and M. Quispe, “Hydraulic Failure Caused by Air in Pipelines of the Experimental Area Ring of ALBA Synchrotron Light Source: Research, Simulations and Solutions”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 105-107. doi:10.18429/JACoW-MEDSI2016-MOPE43
[n] M. Kwiatkowski, M. Alsdorf, B. Dehning, W. Vigano, and C. Zamantzas, “A Gigabit Ethernet Link for an FPGA Based Beam Loss Measurement System”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper MOPC44, pp. 178-181.
[n] P. Li, J. X. Wu, Y. Q. Yang, and Y. J. Yuan, “The Design of Transverse Emittance Measurement at HIRFL-CSR”, in Proc. Cyclotrons'10, Lanzhou, China, Sep. 2010, paper MOPCP109, pp. 272-274.
[n] A. Cours, “Cable Insulation Breakdowns in the Modulator with a Switch Mode High Voltage Power Supply”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper THP46, pp. 709-711.
[n] K. Hasegawa et al., “Development of an Injector Section for the High Intensity Proton Accelerator at JAERI”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP05L, pp. 749-751.
[n] Y.-N. Rao, R. A. Baartman, and T. Planche, “Correction of r-z=1 Resonance in TRIUMF Cyclotron”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3492-3495. doi:10.18429/JACoW-IPAC2018-THPAK110
[n] S. Q. Tian, B. C. Jiang, M. Z. Zhang, Q. L. Zhang, and Z. T. Zhao, “Lattice Design of the SSRF-U Storage Ring”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 304-306. doi:10.18429/JACoW-IPAC2015-MOPJE009
[n] B. W. Wei and J. W. Xia, “HIRFL-CSR Proposal”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper F-04, pp. 354-357.
[n] C.-J. Jing et al., “Experiment on a Tunable Dielectric-Loaded Accelerating Structure”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPD068, pp. 4437-4439.
[n] X. R. Resende, L. Liu, A. C. S. Oliveira, F. H. de S?í, and G. L. do Prado, “High-Level Applications for the Sirius Accelerator Control System”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2462-2465. doi:10.18429/JACoW-IPAC2019-WEPGW003
[n] C. Adolphsen et al., “Design, Fabrication and Measurement of the First Rounded Damped Detuned Accelerator Structure (RDDS1)”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper TUA03, pp. 377-379.
For LaTeX
Use Complete Form
For BibTeX
References
- H. Podlech et al., “Conceptual Design of the Proton LINAC for the High Brilliance Neutron Source HBS”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 910-913.
- B. A. Frolov and V. S. Klenov, “Comparative Research of Low Energy Beam Transport Systems for H-minus Ion Beam”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 333-335.
- E. Chishiro et al., “A Conceptual Design of RF System in the NSP Superconducting Linac at JAERI”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TH4068, pp. 923-925.
- S. Kazakov et al., “Development of an L-band Ferroelectric Phase Shifter”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP073, pp. 955-957.
- M. Kwiatkowski and B. Todd, “Dependable Design Flow for Protection Systems using Programmable Logic Devices”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEMMU010, pp. 706-709.
- S. O. Schriber, L. W. Funk, S. B. Hodge, and R. M. Hutcheon, “Experimental Measurements on a 25 MeV Reflexotron”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1061-1064.
- W. Kalbreier, A. Knezovic, G. Loehr, W. C. Middelkoop, P. Sievers, and A. Warman, “Target Stations and Beam Dumps for the CERN SPS”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1568-1571.
- L. Maci?â, J. J. Casas, C. Colldelram, and M. Quispe, “Hydraulic Failure Caused by Air in Pipelines of the Experimental Area Ring of ALBA Synchrotron Light Source: Research, Simulations and Solutions”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 105-107.
- M. Kwiatkowski, M. Alsdorf, B. Dehning, W. Vigano, and C. Zamantzas, “A Gigabit Ethernet Link for an FPGA Based Beam Loss Measurement System”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper MOPC44, pp. 178-181.
- P. Li, J. X. Wu, Y. Q. Yang, and Y. J. Yuan, “The Design of Transverse Emittance Measurement at HIRFL-CSR”, in Proc. 19th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'10), Lanzhou, China, Sep. 2010, paper MOPCP109, pp. 272-274.
- A. Cours, “Cable Insulation Breakdowns in the Modulator with a Switch Mode High Voltage Power Supply”, in Proc. 22nd Linear Accelerator Conf. (LINAC'04), Lübeck, Germany, Aug. 2004, paper THP46, pp. 709-711.
- K. Hasegawa et al., “Development of an Injector Section for the High Intensity Proton Accelerator at JAERI”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP05L, pp. 749-751.
- Y.-N. Rao, R. A. Baartman, and T. Planche, “Correction of r-z=1 Resonance in TRIUMF Cyclotron”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3492-3495.
- S. Q. Tian, B. C. Jiang, M. Z. Zhang, Q. L. Zhang, and Z. T. Zhao, “Lattice Design of the SSRF-U Storage Ring”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 304-306.
- B. W. Wei and J. W. Xia, “HIRFL-CSR Proposal”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper F-04, pp. 354-357.
- C.-J. Jing et al., “Experiment on a Tunable Dielectric-Loaded Accelerating Structure”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPD068, pp. 4437-4439.
- X. R. Resende, L. Liu, A. C. S. Oliveira, F. H. de S?í, and G. L. do Prado, “High-Level Applications for the Sirius Accelerator Control System”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2462-2465.
- C. Adolphsen et al., “Design, Fabrication and Measurement of the First Rounded Damped Detuned Accelerator Structure (RDDS1)”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper TUA03, pp. 377-379.
Back to search