Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] N. G. Wilson, “Vacuum System Design Considerations of the Los Alamos Accelerator Test Stand (ATS)”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper MO3-34, pp. 125-127.
[n] S. S. Cha, Y. Kim, B. C. Lee, B. N. Lee, H. D. Park, and K. B. Song, “Advanced Automatic Frequency Control System for a Dual Energy S-band RF Electron Linear Accelerator”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2459-2461. doi:10.18429/JACoW-IPAC2014-WEPME077
[n] C. S. Huang et al., “Development of Operating Alarm System at TPS”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2684-2686. doi:10.18429/JACoW-IPAC2019-WEPGW085
[n] D. Xie, J. Y. Benitez, C. M. Lyneis, D. S. Todd, and W. Lu, “Recent production of intense high charge ion beams with VENUS”, in Proc. ECRIS'16, Busan, Korea, Aug.-Sep. 2016, pp. 141-145. doi:10.18429/JACoW-ECRIS2016-THAO01
[n] A. Shor, D. Berkovits, I. Fishman, A. Grin, B. Kaizer, and L. Weissman, “Performance of Beam Chopper at SARAF via RF Deflector Before the RFQ”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper THPB094, pp. 1038-1040.
[n] L. T. Sun et al., “ECRIS Developments Towards Intense High Brightness Highly-charged Ion Beams”, in Proc. HB'14, East Lansing, MI, USA, Nov. 2014, paper THO2AB01, pp. 363-368.
[n] G. V. Dolbilov, G. I. Dolbilova, I. N. Ivanov, A. V. Mazhulin, and T. Ruskov, “Multi-Beam Electron Accelerator for Industrial Application”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP6A14, pp. 2600-2602.
[n] I. Eliyahu et al., “Control of the SARAF High Intensity CW Protron Beam Target Systems”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPMS008, pp. 336-338.
[n] M. Aslaninejad et al., “Lattice and Component Design for the Front End Test Stand MEBT at RAL”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1205-1207. doi:10.18429/JACoW-IPAC2014-TUPRO072
[n] E. Reinfeld et al., “SARAF Beam Lines Control Systems Design”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPMS006, pp. 329-332.
[n] V. Miltchev et al., “Transverse Emittance Measurements at the Photo Injector Test Facility at DESY Zeuthen (PITZ)”, in Proc. DIPAC'03, Mainz, Germany, May 2003, paper PT23, pp. XX-XX.
[n] A. Daly, C. W. Appelbee, and D. Bayley, “Current Monitor for the ISIS Synchrotron RF Cavity Bias Regulator”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAN104, pp. 407-409.
[n] A. Webber-Date, C. Swain, J. Wolfenden, C. Welsch, and H. Zhang, “Characterisation and analysis of supersonic gas jets using interferometric measurement methods”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4588-4591. doi:10.18429/JACoW-IPAC2023-THPL068
[n] D. Berkovits, K. Dunkel, G. Feinberg, S. Halfon, and A. Shor, “Proton Beam Dynamics of the SARAF Linac”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper TUP29, pp. 354-356.
[n] I. Eliyahu et al., “Use CR-39 Plastic Dosimeters for Beam Ion Halo Measurements”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 376-378. doi:10.18429/JACoW-IBIC2016-TUPG23
[n] A. Kurup, “An Automated Conditioning System for the MUCOOL Experiments at Fermilab”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPZ011, pp. 844-846.
[n] B. J. A. Shepherd, J. A. Clarke, A. Bartalesi, M. Modena, M. Struik, and N. A. Collomb, “Prototype Adjustable Permanent Magnet Quadrupoles For CLIC”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPME043, pp. 3606-3608.
[n] F. Furuta, B. Elmore, A. C. Crawford, G. M. Ge, G. H. Hoffstaetter, and M. Liepe, “Multi-cell VEP Results: High Voltage, High Q, and Localized Temperature Analysis”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPR045, pp. 1918-1920.
[n] R. MacGill and R. Yourd, “Mechanical Design of a Heavy Ion RFQ”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3004-3007.
[n] M. A. Clarke-Gayther, “The Development of a Fast Beam Chopper for Next Generation High Power Proton Drivers”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPD095, pp. 3320-3322.
[n] H. Haseroth et al., “Ion Acceleration in the CERN Linac 1”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper WE3-41, pp. 355-357.
[n] N. Pichoff et al., “The SARAF-LINAC project status (07/2024)”, presented at the LINAC'24, Chicago, IL, USA, Aug. 2024, paper THPB013, unpublished.
[n] C. Bourat, H. Braun, and L. Rinolfi, “New Optics of the LEP Injector Linac for Positron Production”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 704-707.
[n] A. Kurup, P. Bonnal, B. Daudin, J. De Jonghe, and M. Dutour, “An Accelerator Design Tool for the International Design Study for the Neutrino Factory”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPZ010, pp. 841-843.
[n] A. Kreisel et al., “SARAF Phase-I Proton / Deuteron Linac Beam Operation Status”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper WEIOB02, pp. 770-774.
[n] G. V. Dolbilov et al., “Project of SILUND-21 Linear Induction Accelerator for Generation of CLIC Driving Beam (Oral Poster)”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TU-01, pp. 357-359.
[n] Y. U. Jeong, S. H. Park, B. C. Lee, H. J. Cha, and G. M. Kazakevitch, “Compact Terahertz Free-Electron Laser as a Users Facility”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper FRM103, pp. XX-XX.
[n] B. J. A. Shepherd, J. A. Clarke, and N. A. Collomb, “Construction and Measurement of Novel Adjustable Permanent Magnet Quadrupoles for CLIC”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPD016, pp. 3530-3532.
[n] J. Y. Benitez, C. M. Lyneis, L. Phair, D. S. Todd, and D. Xie, “Recent Bremsstrahlung Measurements from the Superconducting Electron Cyclotron Resonance Ion Source VENUS”, in Proc. ECRIS'16, Busan, Korea, Aug.-Sep. 2016, pp. 23-29. doi:10.18429/JACoW-ECRIS2016-MOCO04
[n] J. Rodnizki, D. Hirschmann, Z. Horvitz, B. Kaizer, A. Perry, and L. Weissman, “SARAF 4-Rods RFQ RF Power Line Splitting Design and Test”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 693-697. doi:10.18429/JACoW-LINAC2016-TH1A04
[n] P. Buaphad et al., “6/9 MeV S-band Standing Wave Accelerating Structure for Container X-ray Inspection System at RTX”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1924-1926. doi:10.18429/JACoW-IPAC2016-TUPOY010
[n] X. M. Yu, Y. W. Chen, X. H. Wang, and M. S. Liu, “Operation Status of the Beijing Electron-Positron Collider”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper MOP10003, pp. XX-XX.
[n] A. Perry, Y. Ben Aliz, B. Kaizer, A. Kreisel, J. Rodnizki, and L. Weissman, “Status of SARAF Superconducting Acceleration Module”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper MOPO011, pp. 69-73.
[n] V. G. Dolbilov et al., “The KUTI-20 Accelerator First Stage Adjusting”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper WE3-47, pp. 367-370.
[n] M. A. Clarke-Gayther, “The Development of a Fast Beam Chopper for Next Generation High Power Proton Drivers”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP094, pp. 3584-3586.
[n] H. A. Koivisto et al., “HIISI, New 18 GHz ECRIS for the JYFL Accelerator Laboratory”, in Proc. ECRIS'14, Nizhny Novgorod, Russia, Aug. 2014, paper TUOMMH05, pp. 99-103.
[n] K. I. Mihailov, E. A. Golubkov, V. Kobets, A. N. Repkin, A. P. Sumbaev, and V. M. Pavlov, “Upgrade of the RF System on the LUE-200”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 256-257. doi:10.18429/JACoW-RUPAC2016-TUPSA019
[n] M. A. Clarke-Gayther, “A Two Stage Fast Beam Chopper for Next Generation High Power Proton Drivers”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPS104, pp. 1786-1788.
[n] Z. M. Zhang et al., “Development of Intense Proton ECR Ion Sources at IMP”, in Proc. ECRIS'12, Sydney, Australia, Sep. 2012, paper TUPP13, pp. 64-67.
[n] G. V. Dolbilov, “Focusing of Charged Particles by Magnetic Dipoles”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 431-433. doi:10.18429/JACoW-RUPAC2016-WEPSB033
[n] N. Pichoff et al., “The SARAF-LINAC project July 2024 status”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 615-617. doi:10.18429/JACoW-LINAC2024-THAA007
[n] N. Iida et al., “First synchrotron injection attempt into the SuperKEKB HER”, presented at the IPAC'26, Deauville, France, May 2026, paper WEO1T01, unpublished.
[n] J. B?ñhr et al., “Diagnostics for the Photon Injector Test Facility in Desy Zeuthen”, in Proc. DIPAC'01, Grenoble, France, May 2001, paper PS21, pp. XX-XX.
[n] M. Ge, P. N. Koufalis, G. Kulina, M. Liepe, and J. T. Maniscalco, “Low-temperature Baking and Infusion Studies for High-gradient ILC SRF Cavities”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 466-469. doi:10.18429/JACoW-LINAC2018-TUPO057
[n] G. L. Orlandi et al., “Characterization of sub-femto-second pulse duration of low-charge electron bunches using a Bunch-Compressor-Monitor at SwissFEL”, presented at the IBIC'25, Liverpool, UK, Sep. 2025, paper THAC01, unpublished.
[n] J. B?ñhr et al., “Measurement of the longitudinal phase space at the Photo Injector Test Facility at DESY Zeuthen”, in Proc. DIPAC'03, Mainz, Germany, May 2003, paper PT22, pp. XX-XX.
[n] T. Slaton, G. Mazaheri, and T. Shintake, “Development of Nanometer Resolution C-Band Radio Frequency Beam Position Monitors in the Final Focus Test Beam”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TH4064, pp. 911-913.
[n] J. Rodnizki et al., “Superconducting Accelerating Cavity Pressure Sensitivity Analysis and Stiffening”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP134, pp. 373-376.
[n] G. V. Dolbilov, “Two-Beam Induction Linear Collider”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP4B15, pp. 904-906.
[n] C. Bourat, B. Aune, M. Jablonka, and J. M. Joly, “A 600 MHz Chopper System for an Electron Linac”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 982-985.
[n] N. G. Wilson and D. Precechtel, “Mechanical Design and Fabrication of a 425-MHz H-Buncher”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1851-1854.
[n] S. O. Schriber and K. J. Hohban, “Counterstreaming Electron Beam Profile and Position Monitor”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1815-1818.
[n] B. Kaizer, Y. Ben Aliz, I. Fishman, J. Rodnizki, and L. Weissman, “Warming Rate Reduction of the SARAF RF Couplers by Application of a High Voltage Dc Bias”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper THPP132, pp. 1168-1170.
[n] C. Bourat and G. D'Auria, “Beam Dynamics in the Bunching System for ELETTRA”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1759-1762.
[n] L. Liu et al., “Status of Sirius operation with users”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 228-231. doi:10.18429/JACoW-IPAC2025-MOPB089
[n] A. V. Bondarenko, Y. H. Han, Y. U. Jeong, B. C. Lee, S. V. Miginsky, and S. H. Park, “The Design of a 1.8 keV Compton X-ray Generator for a SC RF Linac at KAERI”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH057, pp. 169-171.
[n] G. V. Dolbilov et al., “Compact Infrared FEL for Scientific Applications”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP6B11, pp. 744-745.
[n] C. W. Appelbee, A. Daly, and A. Seville, “Digital Master Oscillator Results for the ISIS Synchrotron”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMN076, pp. 2203-2205.
[n] B. Kaizer, I. Fishman, and I. G. Gertz, “High Power Amplifier Systems for SARAF Phase II”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper TUPB092, pp. 675-677.
[n] S. Sierra, G. Garcin, C. Lievin, G. Vignette, M. Knaak, and M. Pekeler, “Lesson Learned on the Manufacturing of Fundamental Power Couplers for the European XFEL Accelerator”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper THPB096, pp. 1370-1372.
[n] A. A. Fateev, E. V. Gorbachev, and N. I. Lebedev, “Pulse Generator for the Beam Injection System of NICA Collider”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper WEPPC017, pp. 481-482.
[n] G. M. Kazakevich, Y. U. Jeong, G. I. Kuznetsov, B. C. Lee, S. H. Park, and V. M. Pavlov, “Optimization of the Injection System for Microtron-Based Terahertz FEL”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper TUPPH036, pp. 403-406.
[n] G. V. Dolbilov et al., “Development of Linear Induction Accelerators at JINR”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TU-03, pp. 363-365.
[n] M. Ball et al., “Beam Motions Near Separatrix”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUP32, pp. 1548-1550.
[n] T. Y. Chung, C.-H. Chang, A. Y. Chen, Y. W. Chen, J. C. Huang, and J. C. Jan, “Radiation Damage to Undulator Electronics at an Electron Accelerator”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4285-4287. doi:10.18429/JACoW-IPAC2019-THPTS073
[n] D. Bishop et al., “ISAC Control System Update”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper TPPB34, pp. 235-237.
[n] C. Adolphsen and T. Slaton, “Beam Trajectory Jitter in the SLC Linac”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WAB08, pp. 3034-3036.
[n] H. C. Chen, C. L. Chen, H. H. Chen, C. H. Kuo, and Y. K. Lin, “Observation of Beam Disturbance Caused by ID Gap Variation at TLS Storage Ring”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4598-4600. doi:10.18429/JACoW-IPAC2017-THPVA067
[n] N. Pichoff et al., “SARAF MEBT Commissioning”, in Proc. HB'23, Geneva, Switzerland, Oct. 2023, pp. 123-127. doi:10.18429/JACoW-HB2023-TUA3I4
[n] C. Swain, C. Welsch, J. Wolfenden, and L. Eley, “Design of a non-invasive bunch length monitor using coherent synchrotron radiation simulations”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2222-2224. doi:10.18429/JACoW-IPAC2024-WEPG17
[n] J. B?ñhr, D. Lipka, and H. L??decke Deutsches Elektronen-Synchrotron, “Optical Transmission Line For Streak Camera Measurements at Pitz”, in Proc. DIPAC'03, Mainz, Germany, May 2003, paper PM05, pp. XX-XX.
[n] Y. H. Han, Y. U. Jeong, B. C. Lee, S. V. Miginsky, S. H. Park, and A. V. Bondarenko, “A Project of SC ERL at KAERI”, in Proc. FEL'07, Novosibirsk, Russia, Aug. 2007, paper MOPPH064, pp. 160-162.
[n] A. A. Fateev, E. V. Gorbachev, and N. I. Lebedev, “The Power Supply System of Electrostatic Deflecting Plates for Accelerating Complex NICA”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper TUPSA34, pp. 108-109.
[n] M. Liepe et al., “LCLS-II SRF Cavity Processing Protocol Development and Baseline Cavity Performance Demonstration”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper MOPB033, pp. 159-163.
[n] F. Stephan et al., “Recent Results and Perspectives of the Low Emittance Photo Injector at PITZ”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper THBOC02, pp. XX-XX.
[n] S. H. Park et al., “Progress in Development on the Compton X-Ray Source at the KAERI SC RF LINAC”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper TUPPH050, pp. XX-XX.
For LaTeX
Use Complete Form
For BibTeX
References
- N. G. Wilson, “Vacuum System Design Considerations of the Los Alamos Accelerator Test Stand (ATS)”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper MO3-34, pp. 125-127.
- S. S. Cha, Y. Kim, B. C. Lee, B. N. Lee, H. D. Park, and K. B. Song, “Advanced Automatic Frequency Control System for a Dual Energy S-band RF Electron Linear Accelerator”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2459-2461.
- C. S. Huang et al., “Development of Operating Alarm System at TPS”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2684-2686.
- D. Xie, J. Y. Benitez, C. M. Lyneis, D. S. Todd, and W. Lu, “Recent production of intense high charge ion beams with VENUS”, in Proc. 22nd Int. Workshop on ECR Ion Sources (ECRIS'16), Busan, Korea, Aug.-Sep. 2016, pp. 141-145.
- A. Shor, D. Berkovits, I. Fishman, A. Grin, B. Kaizer, and L. Weissman, “Performance of Beam Chopper at SARAF via RF Deflector Before the RFQ”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper THPB094, pp. 1038-1040.
- L. T. Sun et al., “ECRIS Developments Towards Intense High Brightness Highly-charged Ion Beams”, in Proc. 54th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'14), East Lansing, MI, USA, Nov. 2014, paper THO2AB01, pp. 363-368.
- G. V. Dolbilov, G. I. Dolbilova, I. N. Ivanov, A. V. Mazhulin, and T. Ruskov, “Multi-Beam Electron Accelerator for Industrial Application”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP6A14, pp. 2600-2602.
- I. Eliyahu et al., “Control of the SARAF High Intensity CW Protron Beam Target Systems”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPMS008, pp. 336-338.
- M. Aslaninejad et al., “Lattice and Component Design for the Front End Test Stand MEBT at RAL”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1205-1207.
- E. Reinfeld et al., “SARAF Beam Lines Control Systems Design”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPMS006, pp. 329-332.
- V. Miltchev et al., “Transverse Emittance Measurements at the Photo Injector Test Facility at DESY Zeuthen (PITZ)”, in Proc. 6th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'03), Mainz, Germany, May 2003, paper PT23, pp. XX-XX.
- A. Daly, C. W. Appelbee, and D. Bayley, “Current Monitor for the ISIS Synchrotron RF Cavity Bias Regulator”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOPAN104, pp. 407-409.
- A. Webber-Date, C. Swain, J. Wolfenden, C. Welsch, and H. Zhang, “Characterisation and analysis of supersonic gas jets using interferometric measurement methods”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPL068, pp. 4588-4591.
- D. Berkovits, K. Dunkel, G. Feinberg, S. Halfon, and A. Shor, “Proton Beam Dynamics of the SARAF Linac”, in Proc. 22nd Linear Accelerator Conf. (LINAC'04), Lübeck, Germany, Aug. 2004, paper TUP29, pp. 354-356.
- I. Eliyahu et al., “Use CR-39 Plastic Dosimeters for Beam Ion Halo Measurements”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 376-378.
- A. Kurup, “An Automated Conditioning System for the MUCOOL Experiments at Fermilab”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPZ011, pp. 844-846.
- B. J. A. Shepherd, J. A. Clarke, A. Bartalesi, M. Modena, M. Struik, and N. A. Collomb, “Prototype Adjustable Permanent Magnet Quadrupoles For CLIC”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPME043, pp. 3606-3608.
- F. Furuta, B. Elmore, A. C. Crawford, G. M. Ge, G. H. Hoffstaetter, and M. Liepe, “Multi-cell VEP Results: High Voltage, High Q, and Localized Temperature Analysis”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPR045, pp. 1918-1920.
- R. MacGill and R. Yourd, “Mechanical Design of a Heavy Ion RFQ”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3004-3007.
- M. A. Clarke-Gayther, “The Development of a Fast Beam Chopper for Next Generation High Power Proton Drivers”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPD095, pp. 3320-3322.
- H. Haseroth et al., “Ion Acceleration in the CERN Linac 1”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper WE3-41, pp. 355-357.
- N. Pichoff et al., “The SARAF-LINAC project status (07/2024)”, presented at the 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, paper THPB013, unpublished.
- C. Bourat, H. Braun, and L. Rinolfi, “New Optics of the LEP Injector Linac for Positron Production”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 704-707.
- A. Kurup, P. Bonnal, B. Daudin, J. De Jonghe, and M. Dutour, “An Accelerator Design Tool for the International Design Study for the Neutrino Factory”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPZ010, pp. 841-843.
- A. Kreisel et al., “SARAF Phase-I Proton / Deuteron Linac Beam Operation Status”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper WEIOB02, pp. 770-774.
- G. V. Dolbilov et al., “Project of SILUND-21 Linear Induction Accelerator for Generation of CLIC Driving Beam (Oral Poster)”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TU-01, pp. 357-359.
- Y. U. Jeong, S. H. Park, B. C. Lee, H. J. Cha, and G. M. Kazakevitch, “Compact Terahertz Free-Electron Laser as a Users Facility”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper FRM103, pp. XX-XX.
- B. J. A. Shepherd, J. A. Clarke, and N. A. Collomb, “Construction and Measurement of Novel Adjustable Permanent Magnet Quadrupoles for CLIC”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPD016, pp. 3530-3532.
- J. Y. Benitez, C. M. Lyneis, L. Phair, D. S. Todd, and D. Xie, “Recent Bremsstrahlung Measurements from the Superconducting Electron Cyclotron Resonance Ion Source VENUS”, in Proc. 22nd Int. Workshop on ECR Ion Sources (ECRIS'16), Busan, Korea, Aug.-Sep. 2016, pp. 23-29.
- J. Rodnizki, D. Hirschmann, Z. Horvitz, B. Kaizer, A. Perry, and L. Weissman, “SARAF 4-Rods RFQ RF Power Line Splitting Design and Test”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 693-697.
- P. Buaphad et al., “6/9 MeV S-band Standing Wave Accelerating Structure for Container X-ray Inspection System at RTX”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1924-1926.
- X. M. Yu, Y. W. Chen, X. H. Wang, and M. S. Liu, “Operation Status of the Beijing Electron-Positron Collider”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper MOP10003, pp. XX-XX.
- A. Perry, Y. Ben Aliz, B. Kaizer, A. Kreisel, J. Rodnizki, and L. Weissman, “Status of SARAF Superconducting Acceleration Module”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper MOPO011, pp. 69-73.
- V. G. Dolbilov et al., “The KUTI-20 Accelerator First Stage Adjusting”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper WE3-47, pp. 367-370.
- M. A. Clarke-Gayther, “The Development of a Fast Beam Chopper for Next Generation High Power Proton Drivers”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPP094, pp. 3584-3586.
- H. A. Koivisto et al., “HIISI, New 18 GHz ECRIS for the JYFL Accelerator Laboratory”, in Proc. 21st Int. Workshop on ECR Ion Sources (ECRIS'14), Nizhny Novgorod, Russia, Aug. 2014, paper TUOMMH05, pp. 99-103.
- K. I. Mihailov, E. A. Golubkov, V. Kobets, A. N. Repkin, A. P. Sumbaev, and V. M. Pavlov, “Upgrade of the RF System on the LUE-200”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 256-257.
- M. A. Clarke-Gayther, “A Two Stage Fast Beam Chopper for Next Generation High Power Proton Drivers”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPS104, pp. 1786-1788.
- Z. M. Zhang et al., “Development of Intense Proton ECR Ion Sources at IMP”, in Proc. 20th Int. Workshop on ECR Ion Sources (ECRIS'12), Sydney, Australia, Sep. 2012, paper TUPP13, pp. 64-67.
- G. V. Dolbilov, “Focusing of Charged Particles by Magnetic Dipoles”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 431-433.
- N. Pichoff et al., “The SARAF-LINAC project July 2024 status”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 615-617.
- N. Iida et al., “First synchrotron injection attempt into the SuperKEKB HER”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper WEO1T01, this conference.
- J. B?ñhr et al., “Diagnostics for the Photon Injector Test Facility in Desy Zeuthen”, in Proc. 5th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'01), Grenoble, France, May 2001, paper PS21, pp. XX-XX.
- M. Ge, P. N. Koufalis, G. Kulina, M. Liepe, and J. T. Maniscalco, “Low-temperature Baking and Infusion Studies for High-gradient ILC SRF Cavities”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 466-469.
- G. L. Orlandi et al., “Characterization of sub-femto-second pulse duration of low-charge electron bunches using a Bunch-Compressor-Monitor at SwissFEL”, presented at the 14th International Beam Instrumentation Conference (IBIC'25), Liverpool, UK, Sep. 2025, paper THAC01, unpublished.
- J. B?ñhr et al., “Measurement of the longitudinal phase space at the Photo Injector Test Facility at DESY Zeuthen”, in Proc. 6th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'03), Mainz, Germany, May 2003, paper PT22, pp. XX-XX.
- T. Slaton, G. Mazaheri, and T. Shintake, “Development of Nanometer Resolution C-Band Radio Frequency Beam Position Monitors in the Final Focus Test Beam”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TH4064, pp. 911-913.
- J. Rodnizki et al., “Superconducting Accelerating Cavity Pressure Sensitivity Analysis and Stiffening”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP134, pp. 373-376.
- G. V. Dolbilov, “Two-Beam Induction Linear Collider”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP4B15, pp. 904-906.
- C. Bourat, B. Aune, M. Jablonka, and J. M. Joly, “A 600 MHz Chopper System for an Electron Linac”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 982-985.
- N. G. Wilson and D. Precechtel, “Mechanical Design and Fabrication of a 425-MHz H-Buncher”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1851-1854.
- S. O. Schriber and K. J. Hohban, “Counterstreaming Electron Beam Profile and Position Monitor”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1815-1818.
- B. Kaizer, Y. Ben Aliz, I. Fishman, J. Rodnizki, and L. Weissman, “Warming Rate Reduction of the SARAF RF Couplers by Application of a High Voltage Dc Bias”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper THPP132, pp. 1168-1170.
- C. Bourat and G. D'Auria, “Beam Dynamics in the Bunching System for ELETTRA”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1759-1762.
- L. Liu et al., “Status of Sirius operation with users”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPB089, pp. 228-231.
- A. V. Bondarenko, Y. H. Han, Y. U. Jeong, B. C. Lee, S. V. Miginsky, and S. H. Park, “The Design of a 1.8 keV Compton X-ray Generator for a SC RF Linac at KAERI”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPCH057, pp. 169-171.
- G. V. Dolbilov et al., “Compact Infrared FEL for Scientific Applications”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP6B11, pp. 744-745.
- C. W. Appelbee, A. Daly, and A. Seville, “Digital Master Oscillator Results for the ISIS Synchrotron”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMN076, pp. 2203-2205.
- B. Kaizer, I. Fishman, and I. G. Gertz, “High Power Amplifier Systems for SARAF Phase II”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper TUPB092, pp. 675-677.
- S. Sierra, G. Garcin, C. Lievin, G. Vignette, M. Knaak, and M. Pekeler, “Lesson Learned on the Manufacturing of Fundamental Power Couplers for the European XFEL Accelerator”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper THPB096, pp. 1370-1372.
- A. A. Fateev, E. V. Gorbachev, and N. I. Lebedev, “Pulse Generator for the Beam Injection System of NICA Collider”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper WEPPC017, pp. 481-482.
- G. M. Kazakevich, Y. U. Jeong, G. I. Kuznetsov, B. C. Lee, S. H. Park, and V. M. Pavlov, “Optimization of the Injection System for Microtron-Based Terahertz FEL”, in Proc. 28th Int. Free Electron Laser Conf. (FEL'06), Berlin, Germany, Aug.-Sep. 2006, paper TUPPH036, pp. 403-406.
- G. V. Dolbilov et al., “Development of Linear Induction Accelerators at JINR”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TU-03, pp. 363-365.
- M. Ball et al., “Beam Motions Near Separatrix”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUP32, pp. 1548-1550.
- T. Y. Chung, C.-H. Chang, A. Y. Chen, Y. W. Chen, J. C. Huang, and J. C. Jan, “Radiation Damage to Undulator Electronics at an Electron Accelerator”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4285-4287.
- D. Bishop et al., “ISAC Control System Update”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper TPPB34, pp. 235-237.
- C. Adolphsen and T. Slaton, “Beam Trajectory Jitter in the SLC Linac”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WAB08, pp. 3034-3036.
- H. C. Chen, C. L. Chen, H. H. Chen, C. H. Kuo, and Y. K. Lin, “Observation of Beam Disturbance Caused by ID Gap Variation at TLS Storage Ring”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4598-4600.
- N. Pichoff et al., “SARAF MEBT Commissioning”, in Proc. HB'23 (HB), Geneva, Switzerland, Oct. 2023, paper TUA3I4, pp. 123-127.
- C. Swain, C. Welsch, J. Wolfenden, and L. Eley, “Design of a non-invasive bunch length monitor using coherent synchrotron radiation simulations”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPG17, pp. 2222-2224.
- J. B?ñhr, D. Lipka, and H. L??decke Deutsches Elektronen-Synchrotron, “Optical Transmission Line For Streak Camera Measurements at Pitz”, in Proc. 6th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'03), Mainz, Germany, May 2003, paper PM05, pp. XX-XX.
- Y. H. Han, Y. U. Jeong, B. C. Lee, S. V. Miginsky, S. H. Park, and A. V. Bondarenko, “A Project of SC ERL at KAERI”, in Proc. 29th Int. Free Electron Laser Conf. (FEL'07), Novosibirsk, Russia, Aug. 2007, paper MOPPH064, pp. 160-162.
- A. A. Fateev, E. V. Gorbachev, and N. I. Lebedev, “The Power Supply System of Electrostatic Deflecting Plates for Accelerating Complex NICA”, in Proc. 24th Russian Particle Accelerator Conf. (RuPAC'14), Obninsk, Russia, Oct. 2014, paper TUPSA34, pp. 108-109.
- M. Liepe et al., “LCLS-II SRF Cavity Processing Protocol Development and Baseline Cavity Performance Demonstration”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper MOPB033, pp. 159-163.
- F. Stephan et al., “Recent Results and Perspectives of the Low Emittance Photo Injector at PITZ”, in Proc. 26th Int. Free Electron Laser Conf. & 11th FEL Users Workshop (FEL'04), Trieste, Italy, Aug.-Sep. 2004, paper THBOC02, pp. XX-XX.
- S. H. Park et al., “Progress in Development on the Compton X-Ray Source at the KAERI SC RF LINAC”, in Proc. 28th Int. Free Electron Laser Conf. (FEL'06), Berlin, Germany, Aug.-Sep. 2006, paper TUPPH050, pp. XX-XX.
Back to search