JaCoW Logo

Reference Search

Warning
Some papers titles are all uppercase, you must correct this before using this reference.

Favourites


For Word

[n]	M. Pekeler, S. Bauer, B. Griep, H. P. Vogel, and P. vom Stein, “Test Results of Superconducting Cavities Produced and Prepared Completely in Industry”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT040, pp. 635-637. 
[n]	C. Adolphsen et al., “Wakefield and Beam Centering Measurements of a Damped and Detuned X-Band Accelerator Structure”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA40, pp. 3477-3479. 
[n]	B. Feinberg and I. G. Brown, “The Superhilac Heavy Ion Intensity Upgrade”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 860-863. 
[n]	T. E. Oseroff and M. Liepe, “Improvements to the Cornell Sample Host System”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 956-960. doi:10.18429/JACoW-SRF2019-THP045
[n]	S. Setiniyaz et al., “A High Sensitivity Faraday Cup for Ultrashort Electron Bunches”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 214-216. doi:10.18429/JACoW-IPAC2016-MOPMB054
[n]	A. Kurup, N. Bliss, N. A. Collomb, and A. F. Grant, “Costing Methodology and Status of the Neutrino Factory”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPD004, pp. 1410-1412. 
[n]	M. Pekeler, S. Bauer, B. Griep, M. Knaak, H. P. Vogel, and P. vom Stein, “Production of Superconducting Accelerator Modules for High Current Electron Storage Rings”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT041, pp. 638-640. 
[n]	K. Halbach, B. Feinberg, M. I. Green, R. MacGill, J. Milburn, and J. Tanabe, “Hybrid Rare Earth Quadrupole Drift Tube Magnets”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3643-3646. 
[n]	N. A. Ebrahim, S. Aithal, and P. Lavigne, “Experiments on the Plasma Beat-Wave Accelerator”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3539-3542. 
[n]	J. K. Pozimski et al., “Status Report on the RAL Front End Test Stand”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAN111, pp. 1634-1636. 
[n]	B. Feinberg and I. G. Brown, “The SuperHILAC Upgrade Project”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper WE3-9, pp. 263-265. 
[n]	N. A. Ebrahim, “Review of Current Research in Laser and Plasma-Based Acceleration”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper FR1-01, pp. 825-829. 
[n]	S. Yu. Kazakov, “X-Band TE10-TE01 Mode Converters (Oral Poster)”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TU-32, pp. 442-444. 
[n]	P. N. Koufalis and M. Liepe, “Insights into the Role of C, N, and O Introduced by Low Temperature Baking on Niobium Cavity Performance”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2455-2457. doi:10.18429/JACoW-IPAC2018-WEPMF041
[n]	R. Hardekopf et al., “Wire-Scanner Design for the SNS Superconducting-RF Linac”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH041, pp. 1312-1314. 
[n]	P. N. Koufalis, M. Liepe, J. T. Maniscalco, and T. E. Oseroff, “Experimental Results on the Field and Frequency Dependence of the Surface Resistance of Niobium Cavities”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2451-2454. doi:10.18429/JACoW-IPAC2018-WEPMF039
[n]	N. A. Ebrahim, “Electron Acceleration by Relativistic Electron Plasma Waves in the Laser Plasma Beatwave Accelerator Concept”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TH-40, pp. 792-794. 
[n]	J. Apfelbaum et al., “LNLS Synchrotron Light Source Magnets”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP091G, pp. 2195-2197. 
[n]	A. Dixon et al., “A comparison between arc-like and chicane-like bunch compression for X-ray free-electron lasers”, presented at the IPAC'26, Deauville, France, May 2026, paper THP2050, unpublished. 
[n]	C. Piel, K. Dunkel, and C. Schulz, “A 0.5 to 50 MeV Electron Linear Accelerator System”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMN012, pp. 2731-2733. 
[n]	A. R. D. Rodrigues et al., “SIRIUS ACCELERATORS STATUS REPORT”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1403-1406. doi:10.18429/JACoW-IPAC2015-TUPWA006
[n]	D. Gonnella, J. J. Kaufman, P. N. Koufalis, and M. Liepe, “RF Losses from Trapped Flux in SRF Cavities”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2327-2330. doi:10.18429/JACoW-IPAC2016-WEPMR026
[n]	H. Zhao et al., “Measurements of Bremsstrahlung Radiation and X-Ray Heat Load to Cryostat on SECRAL”, in Proc. ECRIS'10, Grenoble, France, Aug. 2010, paper TUPOT009, pp. 134-136. 
[n]	M. Van Gompel et al., “Amorphous Carbon Thin Film Coating of the SPS Beamline: Evaluation of the First Coating Implementation”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 44-47. doi:10.18429/JACoW-IPAC2017-MOOCA3
[n]	P. G. O et al., “The Bear Accelerator”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1462-1465. 
[n]	A. J. DeMello et al., “Progress on MICE RFCC Module for the MICE Experiment”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP290, pp. 1370-1372. 
[n]	J. Gilpatrick, R. Meyer, J. Power, R. Shafer, and F. Wells, “Synchronous Phase and Energy Measurement System for a 6.7 MeV H Beam”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper MO3-38, pp. 134-136. 
[n]	M. A. Plum, R. W. Garnett, R. Meyer, Sr., and R. E. Shafer, “Diagnostics Plate for SNS Linac Commissioning”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH124, pp. 2374-2376. 
[n]	B. Feinberg, G. Behrsing, B. Gavin, S. Ryce, K. Sihler, and D. Syversrud, “Ion Source and Injector Improvements at the SuperHILAC”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TH438, pp. 692-694. 
[n]	D. Berkovits et al., “Operational Experience and Future Goals of the SARAF Linac at SOREQ”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper MO1A01, pp. 100-104. 
[n]	N. I. Azorsky et al., “Study of the 14 GHz Relativistic Klystron for VLEPP”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TU-24, pp. 421-423. 
[n]	B. Feinberg, D. Meaney, R. Thatcher, and C. Timossi, “Superhilac Real-Time Velocity Measurements”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 649-652. 
[n]	M. Boege and J. Chrin, “Integrating Control Systems to Beam Dynamics Applications with CORBA”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TOPB010, pp. 291-293. 
[n]	T. Kii et al., “Design Study on THz Seeded FEL Using Photocathode RF Gun and Short Period Undulator”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper TUAAU03, pp. 196-199. 
[n]	Z. Sun et al., “Toward Stoichiometric and Low-Surface-Roughness Nb3Sn Thin Films via Direct Electrochemical Deposition”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 710. doi:10.18429/JACoW-SRF2021-WEOTEV03
[n]	X. Kang et al., “Asymmetric Hopf Bifurcation for Proton Beams with Electron Cooling”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAP21, pp. 2934-2936. 
[n]	J. T. Maniscalco, D. Gonnella, G. H. Hoffstaetter, P. N. Koufalis, and M. Liepe, “Studies on the Field Dependence of the BCS Surface Resistance”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2335-2337. doi:10.18429/JACoW-IPAC2016-WEPMR028
[n]	P. G. O, L. D. Hansborough, and T. J. Zaugg, “Compact Emittance Scanners for MeV Particle Beams”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1553-1556. 
[n]	N. Vinokurov and Y. U. Jeong, “The Generator of High-power Short Terahertz Pulses”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper THOB03, pp. 535-538. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search