Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. Rothman, R. Michta, R. Nawrocky, A. Batrakov, V. Shilo, and S. Kuznetsov, “Self Triggered, Single Turn Beam Position Monitor for Electron Storage Rings”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA86, pp. 2081-2083.
[n] R. Avery et al., “The Era 4 MeV Injector”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 479-484.
[n] J. S. Kim, I. N. Bogatu, B. Cluggish, S. Galkin, L. Grubert, and L. Zhao, “Far-Tech's ECR Charge Breeder Optimization Simulation Toolset - MCBC, GEM, and IonEx”, in Proc. ECRIS'08, Chicago, IL, USA, Sep. 2008, paper TUCO-C04, pp. 156-159.
[n] H. Bluem, R. Bailey, B. Craft, D. Fritze, R. Harline, and L. Oliszewski, “Operational Exerience of the CAMID Accelerators”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 600-603.
[n] M. Droba, N. S. Joshi, O. Meusel, H. Niebuhr, and U. Ratzinger, “Beam Accumulation in a Stellarator Type Storage Ring”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPD082, pp. 4473-4475.
[n] M. Mouat, E. Klassen, K. S. Lee, J. J. Pon, and P. J. Yogendran, “Update On The Central Control System of TRIUMF's 500 MeV Cyclotron”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPMU018, pp. 469-472.
[n] U. Bechstedt et al., “Geodetical Concept and Alignment of COSY”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1622-1625.
[n] Y. Divin et al., “A Hilbert Transform Spectrometer using a High Tc Josephson Junction for Bunch Length Measurements at the TTF Linac”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP39G, pp. 1509-1511.
[n] F. M?®ot, P. N. Joshi, J. P. Lidestri, and N. Tsoupas, “Progress on the Optics Modeling of BMIÔÇÖs Ion Rapid-Cycling Medical Synchrotron at BNL”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3561-3563. doi:10.18429/JACoW-IPAC2019-THPMP050
[n] Y. Goren and D. U. L. Yu, “Computer-Aided Design of Three-Dimensional Waveguide Loaded Cavities”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 189-193.
[n] E. A. Wadlinger, “General Least-Squares Fitting Procedures to Minimize the Volume of a Hyperellipsoid”, in Proc. LINAC'79, Montauk, NY, USA, Sep. 1979, paper S4-7, pp. 242-244.
[n] C. F. Papadopoulos et al., “RF Injector Beam Dynamics Optimization for LCLS-II”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1974-1976. doi:10.18429/JACoW-IPAC2014-WEPRO015
[n] B. Feinberg, G. Behrsing, B. Gavin, S. Ryce, K. Sihler, and D. Syversrud, “Ion Source and Injector Improvements at the SuperHILAC”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TH438, pp. 692-694.
[n] C. Chen, B. Zhang, Z. Xu, R. Liu, R. Yang, and P. Ding, “Laser transport and stabilization for the CSNS laser wire profile monitor prototype”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 442-445. doi:10.18429/JACoW-IBIC2025-TUPCO38
[n] D. La Civita, R. Bracco, B. Diviacco, G. Tomasin, and D. Zangrando, “FERMI@Elettra Undulator Frame Study”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC116, pp. 2276-2278.
[n] E. J. Taylor, T. D. Hall, M. E. Inman, S. T. Snyder, and A. M. Rowe, “Electropolishing of Niobium SRF Cavities in Low Viscosity Aqueous Electrolytes Without Hydrofluoric Acid”, in Proc. SRF'13, Paris, France, Sep. 2013, paper TUP054, pp. 540-543.
[n] M. Blaskiewicz and W. T. Weng, “Effect of Space Charge Tune Shift on Transverse Instabilities”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1165-1168.
[n] B. Campbell, K. C. D. Chan, E. Newman, and R. Valicenti, “APT Cryomodule Assembly Process and Mockup Model”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOP130, pp. 971-973.
[n] J. Skupin, B. Faatz, Y. Li, J. Pflueger, and T. Vielitz, “Undulator Demagnetization due to Radiation Losses at FLASH”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC129, pp. 2308-2310.
[n] Y. C. Nie et al., “Design of a 104-MHz Trapezoidal IH-RFQ”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5REP079, pp. 4962-4964.
[n] P. Leipe, H. Deitinghoff, H. Klein, K. Langbein, and A. Schempp, “High Current RFQ Accelerator Using a Split Coaxial Resonator with a Four Rod Structure”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper WE3-24, pp. 311-314.
[n] L. Zhao, B. Cluggish, and J. S. Kim, “Modeling ECRIS Plasma Using 2D GEM (General ECRIS Model)”, in Proc. ECRIS'08, Chicago, IL, USA, Sep. 2008, paper MOPO-21, pp. 116-119.
[n] M. Viti et al., “Recent Upgrades of the Bunch Arrival Time Monitors at FLASH and European XFEL”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 695-698. doi:10.18429/JACoW-IPAC2017-MOPIK072
[n] T. Torims et al., “Development of additively manufactured 750 MHz RFQ”, presented at the LINAC'24, Chicago, IL, USA, Aug. 2024, paper THPB019, unpublished.
[n] D. R. Copenhagen, E. A. Knapp, and J. M. Potter, “Operating Characteristics of a Full Power Cloverleaf Accelerator Tank”, in Proc. LINAC'66, Los Alamos, NM, USA, Oct. 1966, paper III-10, pp. 137-139.
[n] C. Rimbault and P. Bambade, “Fast Luminosity Monitoring using Diamond Sensors for Super Flavour Factories”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPME004, pp. 473-475.
[n] R. Klein et al., “Absolute Measurement of the MLS Storage Ring Parameters”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC032, pp. 2055-2057.
[n] W. F. Bergan, A. C. Bartnik, I. V. Bazarov, H. He, D. L. Rubin, and J. P. Sethna, “Using Sloppy Models for Constrained Emittance Minimization at the Cornell Electron Storage Ring (CESR)”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2418-2420. doi:10.18429/JACoW-IPAC2017-TUPVA136
[n] D. Liska, R. Brown, J. Cost, and R. Kraus, “The Development of Small-Scale Quadrupoles to Operate at 20 to 50 K”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper WE3-53, pp. 445-447.
[n] A. H. Adeyemi et al., “PEPPo: Using a Polarized Electron Beam to Produce Polarized Positrons”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1878-1880. doi:10.18429/JACoW-IPAC2015-TUPMA020
[n] L. Hendrickson et al., “Fast Feedback for Linear Colliders”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAE03, pp. 2389-2393.
[n] A. S. Palaha et al., “Report on Control/DAQ Software Design and Current State of Implementation for the Percival Detector”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 251-254. doi:10.18429/JACoW-ICALEPCS2015-MOPGF070
[n] A. Luccio, D. J. Clark, D. Elo, P. Frazier, D. Morris, and M. Renkas, “A Polarized Ion Source for the Berkeley 88 - Inch Cyclotron”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 140-145.
[n] P. N. Joshi, S. Dimaiuta, G. Ganetis, R. C. Gupta, and Y. Shiroyanagi, “Novel Quench Detection System For HTS Coils”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP166, pp. 1136-1138.
[n] E. J. Minehara et al., “A Practitioner's Guide to Cheap Cryostat Construction of the Energy Recovery Superconducting Linac (ERL) Driven Light Sources”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper THP16036, pp. XX-XX.
[n] D. Evans, R. Valicenti, and F. W. Wood, “Integrated Design of the SSC Linac Injector”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper MO4-68, pp. 238-240.
[n] R. S. Livingston, “Session IV Introductory Comments”, in Proc. Cyclotrons'59, Oak Ridge, TN, USA, Jul. 1959, paper CYC59D02, pp. 182-182.
[n] P. Chitnis, T. G. Robertazzi, K. A. Brown, and C. Theisen, “Quantitative Fault Tree Analysis of the Beam Permit System Elements of Relativistic Heavy Ion Collider (RHIC) at BNL”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC076, pp. 269-272.
[n] G. W??stefeld et al., “Low Alpha Operation of the MLS Electron Storage Ring”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5RFP005, pp. 1093-1095.
[n] C. Tambasco et al., “First BTF Measurements at the Large Hadron Collider”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3051-3054. doi:10.18429/JACoW-IPAC2016-WEPOY030
[n] P. He et al., “Magnetic Field Mapping and Integral Transfer Function Matching of the Prototype Dipoles for the NSLS-II at BNL”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP149, pp. 1112-1114.
For LaTeX
Use Complete Form
For BibTeX
References
- J. Rothman, R. Michta, R. Nawrocky, A. Batrakov, V. Shilo, and S. Kuznetsov, “Self Triggered, Single Turn Beam Position Monitor for Electron Storage Rings”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEA86, pp. 2081-2083.
- R. Avery et al., “The Era 4 MeV Injector”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 479-484.
- J. S. Kim, I. N. Bogatu, B. Cluggish, S. Galkin, L. Grubert, and L. Zhao, “Far-Tech's ECR Charge Breeder Optimization Simulation Toolset - MCBC, GEM, and IonEx”, in Proc. 18th Int. Workshop on ECR Ion Sources (ECRIS'08), Chicago, IL, USA, Sep. 2008, paper TUCO-C04, pp. 156-159.
- H. Bluem, R. Bailey, B. Craft, D. Fritze, R. Harline, and L. Oliszewski, “Operational Exerience of the CAMID Accelerators”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 600-603.
- M. Droba, N. S. Joshi, O. Meusel, H. Niebuhr, and U. Ratzinger, “Beam Accumulation in a Stellarator Type Storage Ring”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPD082, pp. 4473-4475.
- M. Mouat, E. Klassen, K. S. Lee, J. J. Pon, and P. J. Yogendran, “Update On The Central Control System of TRIUMF's 500 MeV Cyclotron”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPMU018, pp. 469-472.
- U. Bechstedt et al., “Geodetical Concept and Alignment of COSY”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1622-1625.
- Y. Divin et al., “A Hilbert Transform Spectrometer using a High Tc Josephson Junction for Bunch Length Measurements at the TTF Linac”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP39G, pp. 1509-1511.
- F. M?®ot, P. N. Joshi, J. P. Lidestri, and N. Tsoupas, “Progress on the Optics Modeling of BMIÔÇÖs Ion Rapid-Cycling Medical Synchrotron at BNL”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3561-3563.
- Y. Goren and D. U. L. Yu, “Computer-Aided Design of Three-Dimensional Waveguide Loaded Cavities”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 189-193.
- E. A. Wadlinger, “General Least-Squares Fitting Procedures to Minimize the Volume of a Hyperellipsoid”, in Proc. 1979 Linear Accelerator Conf. (LINAC'79), Montauk, NY, USA, Sep. 1979, paper S4-7, pp. 242-244.
- C. F. Papadopoulos et al., “RF Injector Beam Dynamics Optimization for LCLS-II”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1974-1976.
- B. Feinberg, G. Behrsing, B. Gavin, S. Ryce, K. Sihler, and D. Syversrud, “Ion Source and Injector Improvements at the SuperHILAC”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TH438, pp. 692-694.
- C. Chen, B. Zhang, Z. Xu, R. Liu, R. Yang, and P. Ding, “Laser transport and stabilization for the CSNS laser wire profile monitor prototype”, in Proc. 14th International Beam Instrumentation Conference (IBIC'25), Liverpool, UK, Sep. 2025, pp. 442-445.
- D. La Civita, R. Bracco, B. Diviacco, G. Tomasin, and D. Zangrando, “FERMI@Elettra Undulator Frame Study”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC116, pp. 2276-2278.
- E. J. Taylor, T. D. Hall, M. E. Inman, S. T. Snyder, and A. M. Rowe, “Electropolishing of Niobium SRF Cavities in Low Viscosity Aqueous Electrolytes Without Hydrofluoric Acid”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper TUP054, pp. 540-543.
- M. Blaskiewicz and W. T. Weng, “Effect of Space Charge Tune Shift on Transverse Instabilities”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1165-1168.
- B. Campbell, K. C. D. Chan, E. Newman, and R. Valicenti, “APT Cryomodule Assembly Process and Mockup Model”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper MOP130, pp. 971-973.
- J. Skupin, B. Faatz, Y. Li, J. Pflueger, and T. Vielitz, “Undulator Demagnetization due to Radiation Losses at FLASH”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC129, pp. 2308-2310.
- Y. C. Nie et al., “Design of a 104-MHz Trapezoidal IH-RFQ”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5REP079, pp. 4962-4964.
- P. Leipe, H. Deitinghoff, H. Klein, K. Langbein, and A. Schempp, “High Current RFQ Accelerator Using a Split Coaxial Resonator with a Four Rod Structure”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper WE3-24, pp. 311-314.
- L. Zhao, B. Cluggish, and J. S. Kim, “Modeling ECRIS Plasma Using 2D GEM (General ECRIS Model)”, in Proc. 18th Int. Workshop on ECR Ion Sources (ECRIS'08), Chicago, IL, USA, Sep. 2008, paper MOPO-21, pp. 116-119.
- M. Viti et al., “Recent Upgrades of the Bunch Arrival Time Monitors at FLASH and European XFEL”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 695-698.
- T. Torims et al., “Development of additively manufactured 750 MHz RFQ”, presented at the 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, paper THPB019, unpublished.
- D. R. Copenhagen, E. A. Knapp, and J. M. Potter, “Operating Characteristics of a Full Power Cloverleaf Accelerator Tank”, in Proc. 1966 Linear Accelerator Conf. (LINAC'66), Los Alamos, NM, USA, Oct. 1966, paper III-10, pp. 137-139.
- C. Rimbault and P. Bambade, “Fast Luminosity Monitoring using Diamond Sensors for Super Flavour Factories”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPME004, pp. 473-475.
- R. Klein et al., “Absolute Measurement of the MLS Storage Ring Parameters”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC032, pp. 2055-2057.
- W. F. Bergan, A. C. Bartnik, I. V. Bazarov, H. He, D. L. Rubin, and J. P. Sethna, “Using Sloppy Models for Constrained Emittance Minimization at the Cornell Electron Storage Ring (CESR)”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2418-2420.
- D. Liska, R. Brown, J. Cost, and R. Kraus, “The Development of Small-Scale Quadrupoles to Operate at 20 to 50 K”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper WE3-53, pp. 445-447.
- A. H. Adeyemi et al., “PEPPo: Using a Polarized Electron Beam to Produce Polarized Positrons”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1878-1880.
- L. Hendrickson et al., “Fast Feedback for Linear Colliders”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RAE03, pp. 2389-2393.
- A. S. Palaha et al., “Report on Control/DAQ Software Design and Current State of Implementation for the Percival Detector”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 251-254.
- A. Luccio, D. J. Clark, D. Elo, P. Frazier, D. Morris, and M. Renkas, “A Polarized Ion Source for the Berkeley 88 - Inch Cyclotron”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 140-145.
- P. N. Joshi, S. Dimaiuta, G. Ganetis, R. C. Gupta, and Y. Shiroyanagi, “Novel Quench Detection System For HTS Coils”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP166, pp. 1136-1138.
- E. J. Minehara et al., “A Practitioner's Guide to Cheap Cryostat Construction of the Energy Recovery Superconducting Linac (ERL) Driven Light Sources”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper THP16036, pp. XX-XX.
- D. Evans, R. Valicenti, and F. W. Wood, “Integrated Design of the SSC Linac Injector”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper MO4-68, pp. 238-240.
- R. S. Livingston, “Session IV Introductory Comments”, in Proc. Conf. on Sector-Focused Cyclotrons (Cyclotrons'59), Oak Ridge, TN, USA, Jul. 1959, paper CYC59D02, pp. 182-182.
- P. Chitnis, T. G. Robertazzi, K. A. Brown, and C. Theisen, “Quantitative Fault Tree Analysis of the Beam Permit System Elements of Relativistic Heavy Ion Collider (RHIC) at BNL”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC076, pp. 269-272.
- G. W??stefeld et al., “Low Alpha Operation of the MLS Electron Storage Ring”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5RFP005, pp. 1093-1095.
- C. Tambasco et al., “First BTF Measurements at the Large Hadron Collider”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3051-3054.
- P. He et al., “Magnetic Field Mapping and Integral Transfer Function Matching of the Prototype Dipoles for the NSLS-II at BNL”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP149, pp. 1112-1114.
Back to search