Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] L. Groening, M. T. Maier, C. Xiao, and O. K. Kester, “Emittance Transfer in Linacs”, in Proc. HB'14, East Lansing, MI, USA, Nov. 2014, paper WEO3LR04, pp. 289-293.
[n] F. E. Hannon, A. S. Hofler, and R. Kazimi, “Optimizing the CEBAF Injector for Beam Operation with a Higher Voltage Electron Gun”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP288, pp. 2023-2025.
[n] F. M. Tilaro and B. Copy, “Assessment And Testing of Industrial Devices Robustness Against Cyber Security Attacks”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMU029, pp. 1130-1133.
[n] N. Aoki, Y. Baba, H. Kimura, N. Kobayashi, and M. Kumada, “A Very Fast Kicker Magnet: A New Approach”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP27G, pp. 2272-2274.
[n] X. Li, X. Shen, and R. Zwarich, “LINAC Section 3 and 4 Replacement at the Canadian Light Source”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 266. doi:10.18429/JACoW-MEDSI2020-WEPB01
[n] M. A. Nozdrin, N. Balalykin, V. Minashkin, V. Y. Schegolev, G. Shirkov, and G. V. Trubnikov, “Development of the New Control Systems for JINR e- Linac Accelerator Test-Bench”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper WEPPD039, pp. 626-628.
[n] J. Dietrich et al., “Status of 2 MeV Electron Cooler for COSY-Julich/HESR”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP229, pp. 1918-1920.
[n] R. F. Tusting, J. E. Katz, and Q. Kerns, “The Development of 2000 - Ampere Diodes for High Current Ferrite Biasing Supplies”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 320-328.
[n] H. Ohgaki, Y. Iwasaki, S. Koda, Y. Takabayashi, T. Tomimasu, and K. Yoshida, “Global COD Correction of SAGA-LS Storage Ring”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAN044, pp. 3327-3329.
[n] Y. Higurashi et al., “Developments of RIKEN New Superconducting ECR Ion Source”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEC060, pp. 4191-4193.
[n] G. Chen et al., “Performance of a Low Frequency QWR-Based SRF Gun”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 472. doi:10.18429/JACoW-SRF2021-TUPCAV015
[n] T. Fujisawa et al., “Design of Radio-Frequency System for the RIKEN Separated Sector Cyclotron”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2897-2900.
[n] N. N. Alexeev et al., “Upgrade of Heavy Ion Injector I-3 at ITEP”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 346-348. doi:10.18429/JACoW-LINAC2018-TUPO011
[n] H. Yang, C. H. Shim, I. Nam, and M. Cho, “Electron bunch spacing for the FEL generation with a laser heater and collimators at PAL-XFEL”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper MOPG41, unpublished.
[n] S. Kashiwagi, G. Isoyama, R. Kato, H. Sasaki, K. Tsuchiya, and S. Yamamoto, “Study on Focusing Property of New Type Wiggler and SASE-FEL Experiment at the ISIR, Osaka University”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper THPPH040, pp. 672-675.
[n] D. Janssen et al., “A Superconducting RF Gun Current Status of the Drossel Collaboration”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA62, pp. 2033-2035.
[n] G. D'Auria, P. Craievich, R. J. Bakker, and S. D. Di Mitri, “Energy Spread in BTW Accelerating Structures at ELETTRA”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper MOP62, pp. 159-161.
[n] J. Qiang, “Efficient 3D Poisson Solvers or Space-charge Simulation”, in Proc. HB'14, East Lansing, MI, USA, Nov. 2014, paper MOPAB29, pp. 94-98.
[n] R. W. Assmann, F. J. Decker, M. Seidel, R. H. Siemann, and D. Whittum, “Observation of Dark-Current Signals from the S-Band Structures of the SLAC Linac”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8W025, pp. 500-502.
[n] M. A. Al-Najdawi, “Thermomechanical Analysis of SESAME High-Heat-Load Front Ends Components”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 202-204. doi:10.18429/JACoW-MEDSI2018-WEPH02
[n] I. Zagorodnov and T. Weiland, “A Conformal Scheme for Wake Field Calculation”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPRI075, pp. 1682-1684.
[n] Y. W. Kang, R. L. Kustom, and J. F. Bridges, “HOM Damping with Coaxial Dampers in a Pillbox Cavity Without the Fundamental Mode Frequency Rejection Filter”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 910-913.
[n] Y. Arakaki, S. Machida, Y. Mori, N. Tokuda, M. Tomizawa, and T. Watanabe, “Influence of Nonlinear Multipole Fields on Beam Loss in the Slow Extraction from JHF Main Ring”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP08B, pp. 2143-2145.
[n] N. Yampolsky, E.-C. Huang, J. Quemuel, and A. Scheinker, “Early prediction of system failures at LANSCE”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper THPG55, unpublished.
[n] M. Kenda, A. Bardorfer, T. Beltram, and H. Kocevar, “Programming Interfaces for Reconfigurable Instruments”, in Proc. PCaPAC'10, Saskatoon, Canada, Oct. 2010, paper WEPL032, pp. 91-93.
[n] C. C. Xing, T. He, C. X. Li, J. Li, L. Lu, and L. Yang, “Design of Practical HSC Type Injector for Cancer Therapy”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 557-559. doi:10.18429/JACoW-LINAC2018-TUPO101
[n] M. Gusarova and I. I. Petrushina, “Influence of the Different Geometric Parameters of Superconducting Elliptical Cavities on the Multipactor”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper THPSC19, pp. 362-364.
[n] A. Schempp et al., “The Cryring RFQ for Heavy Ion Acceleration”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1231-1234.
[n] M. Eriksson et al., “Challenge of MAX IV Towards a Multi-Purpose Highly Brilliant Light Source”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUOBS4, pp. 737-741.
[n] R. Assmann et al., “Energy Calibration with Resonant Depolarization at LEP in 1993”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 935-938.
[n] Y. Li, K. Hwang, C. E. Mitchell, R. S. Rainer, R. D. Ryne, and V. V. Smaluk, “Design of Double- and Multi-Bend Achromat Lattices with Large Dynamic Aperture and Approximate Invariants”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1945-1948. doi:10.18429/JACoW-IPAC2021-TUPAB223
[n] A. Schempp and H. Klein, “Spiral Loaded Cavities for Heavy Ion Acceleration”, in Proc. LINAC'76, Chalk River, Canada, Sep. 1976, paper B03, pp. 67-72.
[n] K. G. Andersen et al., “Construction and Installation of the New CERN Proton Synchrotron Internal Beam Dumps”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1409-1412. doi:10.18429/JACoW-IPAC2021-TUPAB031
[n] H. Chaloupka et al., “A Proposed Superconducting Photoemission Source of High Brightness”, in Proc. SRF'89, Tsukuba, Japan, Aug. 1989, paper SRF89G12, pp. XX-XX.
For LaTeX
Use Complete Form
For BibTeX
References
- L. Groening, M. T. Maier, C. Xiao, and O. K. Kester, “Emittance Transfer in Linacs”, in Proc. 54th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'14), East Lansing, MI, USA, Nov. 2014, paper WEO3LR04, pp. 289-293.
- F. E. Hannon, A. S. Hofler, and R. Kazimi, “Optimizing the CEBAF Injector for Beam Operation with a Higher Voltage Electron Gun”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP288, pp. 2023-2025.
- F. M. Tilaro and B. Copy, “Assessment And Testing of Industrial Devices Robustness Against Cyber Security Attacks”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPMU029, pp. 1130-1133.
- N. Aoki, Y. Baba, H. Kimura, N. Kobayashi, and M. Kumada, “A Very Fast Kicker Magnet: A New Approach”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP27G, pp. 2272-2274.
- X. Li, X. Shen, and R. Zwarich, “LINAC Section 3 and 4 Replacement at the Canadian Light Source”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 266.
- M. A. Nozdrin, N. Balalykin, V. Minashkin, V. Y. Schegolev, G. Shirkov, and G. V. Trubnikov, “Development of the New Control Systems for JINR e- Linac Accelerator Test-Bench”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper WEPPD039, pp. 626-628.
- J. Dietrich et al., “Status of 2 MeV Electron Cooler for COSY-Julich/HESR”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP229, pp. 1918-1920.
- R. F. Tusting, J. E. Katz, and Q. Kerns, “The Development of 2000 - Ampere Diodes for High Current Ferrite Biasing Supplies”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 320-328.
- H. Ohgaki, Y. Iwasaki, S. Koda, Y. Takabayashi, T. Tomimasu, and K. Yoshida, “Global COD Correction of SAGA-LS Storage Ring”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPAN044, pp. 3327-3329.
- Y. Higurashi et al., “Developments of RIKEN New Superconducting ECR Ion Source”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEC060, pp. 4191-4193.
- G. Chen et al., “Performance of a Low Frequency QWR-Based SRF Gun”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 472.
- T. Fujisawa et al., “Design of Radio-Frequency System for the RIKEN Separated Sector Cyclotron”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2897-2900.
- N. N. Alexeev et al., “Upgrade of Heavy Ion Injector I-3 at ITEP”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 346-348.
- H. Yang, C. H. Shim, I. Nam, and M. Cho, “Electron bunch spacing for the FEL generation with a laser heater and collimators at PAL-XFEL”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPG41, unpublished.
- S. Kashiwagi, G. Isoyama, R. Kato, H. Sasaki, K. Tsuchiya, and S. Yamamoto, “Study on Focusing Property of New Type Wiggler and SASE-FEL Experiment at the ISIR, Osaka University”, in Proc. 28th Int. Free Electron Laser Conf. (FEL'06), Berlin, Germany, Aug.-Sep. 2006, paper THPPH040, pp. 672-675.
- D. Janssen et al., “A Superconducting RF Gun Current Status of the Drossel Collaboration”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEA62, pp. 2033-2035.
- G. D'Auria, P. Craievich, R. J. Bakker, and S. D. Di Mitri, “Energy Spread in BTW Accelerating Structures at ELETTRA”, in Proc. 22nd Linear Accelerator Conf. (LINAC'04), Lübeck, Germany, Aug. 2004, paper MOP62, pp. 159-161.
- J. Qiang, “Efficient 3D Poisson Solvers or Space-charge Simulation”, in Proc. 54th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'14), East Lansing, MI, USA, Nov. 2014, paper MOPAB29, pp. 94-98.
- R. W. Assmann, F. J. Decker, M. Seidel, R. H. Siemann, and D. Whittum, “Observation of Dark-Current Signals from the S-Band Structures of the SLAC Linac”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 8W025, pp. 500-502.
- M. A. Al-Najdawi, “Thermomechanical Analysis of SESAME High-Heat-Load Front Ends Components”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 202-204.
- I. Zagorodnov and T. Weiland, “A Conformal Scheme for Wake Field Calculation”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPRI075, pp. 1682-1684.
- Y. W. Kang, R. L. Kustom, and J. F. Bridges, “HOM Damping with Coaxial Dampers in a Pillbox Cavity Without the Fundamental Mode Frequency Rejection Filter”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 910-913.
- Y. Arakaki, S. Machida, Y. Mori, N. Tokuda, M. Tomizawa, and T. Watanabe, “Influence of Nonlinear Multipole Fields on Beam Loss in the Slow Extraction from JHF Main Ring”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP08B, pp. 2143-2145.
- N. Yampolsky, E.-C. Huang, J. Quemuel, and A. Scheinker, “Early prediction of system failures at LANSCE”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPG55, unpublished.
- M. Kenda, A. Bardorfer, T. Beltram, and H. Kocevar, “Programming Interfaces for Reconfigurable Instruments”, in Proc. 8th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'10), Saskatoon, Canada, Oct. 2010, paper WEPL032, pp. 91-93.
- C. C. Xing, T. He, C. X. Li, J. Li, L. Lu, and L. Yang, “Design of Practical HSC Type Injector for Cancer Therapy”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 557-559.
- M. Gusarova and I. I. Petrushina, “Influence of the Different Geometric Parameters of Superconducting Elliptical Cavities on the Multipactor”, in Proc. 24th Russian Particle Accelerator Conf. (RuPAC'14), Obninsk, Russia, Oct. 2014, paper THPSC19, pp. 362-364.
- A. Schempp et al., “The Cryring RFQ for Heavy Ion Acceleration”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1231-1234.
- M. Eriksson et al., “Challenge of MAX IV Towards a Multi-Purpose Highly Brilliant Light Source”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUOBS4, pp. 737-741.
- R. Assmann et al., “Energy Calibration with Resonant Depolarization at LEP in 1993”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 935-938.
- Y. Li, K. Hwang, C. E. Mitchell, R. S. Rainer, R. D. Ryne, and V. V. Smaluk, “Design of Double- and Multi-Bend Achromat Lattices with Large Dynamic Aperture and Approximate Invariants”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 1945-1948.
- A. Schempp and H. Klein, “Spiral Loaded Cavities for Heavy Ion Acceleration”, in Proc. 1976 Proton Linear Accelerator Conf. (LINAC'76), Chalk River, Canada, Sep. 1976, paper B03, pp. 67-72.
- K. G. Andersen et al., “Construction and Installation of the New CERN Proton Synchrotron Internal Beam Dumps”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 1409-1412.
- H. Chaloupka et al., “A Proposed Superconducting Photoemission Source of High Brightness”, in Proc. 4th Int. Conf. RF Superconductivity (SRF'89), Tsukuba, Japan, Aug. 1989, paper SRF89G12, pp. XX-XX.
Back to search