JaCoW Logo

Reference Search

Warning
Some papers titles are all uppercase, you must correct this before using this reference.

The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	D. H. Ha et al., “Design and Manufacture of 10 kW, 83.2 MHz 4-way Power Combiner for Solid State Amplifier”, in Proc. Cyclotrons'19, Cape Town, South Africa, Sep. 2019, pp. 97-99. doi:10.18429/JACoW-CYCLOTRONS2019-MOP029
[n]	J. Berg, “Choosing Cavity Voltages and Phases for the CBETA Multi-Pass Energy Recovery Linac”, presented at the IPAC'23, Venice, Italy, May 2023, paper MOPL161, unpublished. 
[n]	S. C. Hartman, T. Shintake, and N. Akasaka, “Nanometer Resolution BPM Using Damped Slot Resonator”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPC29, pp. 2655-2657. 
[n]	M. Abbaslou et al., “Beam dynamics design for alternating phase focusing proton linac for a compact accelerator based neutron source”, presented at the HIAT'25, East Lansing, MI, USA, Jun. 2025, paper MOP13, unpublished. 
[n]	J. Peng et al., “Beam Commissioning Results of the CSNS Linac”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1223-1225. doi:10.18429/JACoW-IPAC2017-TUOBA1
[n]	P. Piminov et al., “Y(1S)-meson rest mass measurement on the VEPP-4M collider”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 582-584. doi:10.18429/JACoW-IPAC2025-MOPM115
[n]	T. Knuth, D. Krämer, E. Weihreter, I. Chertok, S. Michailov, and B. Sukhina, “The Magnet System for the BESSY II Injector Synchrotron”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPE09, pp. 1316-1318. 
[n]	O. Meshkov et al., “Development and testing of an autocorrelator for measuring the duration of picosecond pulses of near infrared radiation”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 3174-3176. doi:10.18429/JACoW-IPAC2025-THPS104
[n]	J. S. L. Yap et al., “Tracking and LET Measurements with the MiniPIX-TimePIX Detector for 60 MeV Clinical Protons”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1260-1263. doi:10.18429/JACoW-IPAC2021-MOPAB418
[n]	V. H. Hardion, M. Lindberg, and D. P. Spruce, “The MAX IV Way of Agile Project Management for the Control System”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1021. doi:10.18429/JACoW-ICALEPCS2019-WEMPL008
[n]	A. Wrulich, “Optimization of the Accelerating Structures for the Superconducting Linear Accelerator of the Energy Amplifier”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5W034, pp. 1188-1190. 
[n]	M. Checchin, A. Grassellino, M. Martinello, A. Romanenko, and J. Zasadzinski, “Mean Free Path Dependence of the Trapped Flux Surface Resistance”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper MOPB020, pp. 129-134. 
[n]	R. W. Thomae et al., “Low beta Ion Acceleration with the FOM-MEQALAC-System”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3172-3175. 
[n]	M. Xiao, V. P. Nagaslaev, V. Sajaev, and A. Valishev, “Linear Lattice Modeling of the Recycler Ring at Fermilab”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPCH059, pp. 2056-2058. 
[n]	M. Parise, P. Duchesne, D. Longuevergne, D. Passarelli, and V. Roger, “Fabrication Experience of the Pre-Production PIP-II SSR2 Cavities at Fermilab”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 529-532. doi:10.18429/JACoW-LINAC2022-TUPOGE17
[n]	D. E. Suddeth and G. J. Volk, “Intense Pulsed Neutron Source (IPNS-I) Accelerator 500 MeV Fast Kickers”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3024-3026. 
[n]	M. Xiao, R. Ainsworth, K. J. Hazelwood, and M.-J. Yang, “Linear Modelling and Lattice Correction from Betatron Phase Measurements at the Fermilab Recycler NOvA Ring”, in Proc. HB'23, Geneva, Switzerland, Oct. 2023, pp. 534-537. doi:10.18429/JACoW-HB2023-THBP30
[n]	J. E. Spencer, “High Brightness Sources for Colliders”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 3270-3273. 
[n]	S. Makimura et al., “Muon production target at J-PARC”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1941-1944. doi:10.18429/JACoW-IPAC2024-WECN1
[n]	J. C. Lee et al., “RF measurement of SKKUCY-10 RF Cavity for Impedance Matching”, in Proc. Cyclotrons'19, Cape Town, South Africa, Sep. 2019, pp. 100-102. doi:10.18429/JACoW-CYCLOTRONS2019-MOP030
[n]	J. Wang and H. Yin, “Design and optimization of diffraction-limited storage ring lattices based on many-objective evolutionary algorithms”, presented at the IPAC'23, Venice, Italy, May 2023, paper WEPL085, unpublished. 
[n]	T. Xu et al., “Low-emittance SRF photo-injector prototype cryomodule for the LCLS-II high-energy upgrade: design and fabrication”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1396-1399. doi:10.18429/JACoW-IPAC2023-TUPA028
[n]	H. M. Milcent and F. B. Bernard, “LHC Powering Circuit Overview: A Mixed Industrial and Classic Accelerator Control Application”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper TPPB23, pp. 211-213. 
[n]	G. S. Bauer, “Development of High Power Targets”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper FRXCH01, pp. 276-280. 
[n]	Y. Y. Guo, H. F. Ji, Y. Jiao, and N. Li, “Preliminary study of the fringe field effects and cross talk between magnets in the HEPS storage ring”, presented at the SAP'23, Xichang, China, Jul. 2023, paper TUPB030, unpublished. 
[n]	P. Pizzol, D. Vandygriff, J. Mammosser, R. Afanador, and S. Gold, “First results of the sXmap cavity field emission detection system from inside a cryomodule”, in Proc. NAPAC'25, Sacramento, California, USA, Aug. 2025, pp. 287-290. doi:10.18429/JACoW-NAPAC2025-MOP100
[n]	T. Itahashi, M. Kondo, and T. Yamagata, “Feasibility Study for Acceleration of Fission Fragments with AVF Cyclotron”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper J-12, pp. 608-611. 
[n]	C. Christou, K. Dunkel, C. Piel, and V. Kempson, “The Pre-Injector Linac for the Diamond Light Source”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper MOP21, pp. 84-86. 
[n]	K. C. D. Chan and S. O. Schriber, “Characteristics of Large Beam Hole Biperiodic Accelerator Structures”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2766-2769. 
[n]	A. H. Botha et al., “An Injector Cyclotron for Acceleration of Polarised and Heavy Ions at the NAC”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper I6-13, pp. 515-518. 
[n]	D. Xu, J. Berg, S. Peggs, and V. Ptitsyn, “Lattice design for Low Energy Cooling in EIC HSR-IR2”, in Proc. NAPAC'25, Sacramento, California, USA, Aug. 2025, pp. 496-499. doi:10.18429/JACoW-NAPAC2025-TUP059
[n]	V. Maior, V. Dorokhov, O. Meshkov, and M. Timoshenko, “Measurement of the radiation damping time via optical methods”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 2766-2769. doi:10.18429/JACoW-IPAC2025-THPM038
[n]	S. Krave, V. Marinozzi, and R. Jayathilaka, “Bi-filar coil winding for fast quench protection”, presented at the NAPAC'25, Sacramento, California, USA, Aug. 2025, paper SUP059, unpublished. 
[n]	M. Abbaslou et al., “Design considerations for a proton linac for a compact accelerator based neutron source for Canada”, presented at the HIAT'25, East Lansing, MI, USA, Jun. 2025, paper MOC02, unpublished. 
[n]	O. Kester, D. Marquardt, M. Abbaslou, A. Gottberg, and R. Laxdal, “Development of compact accelerator based neutron sources for Canada, the PC-CANS project”, in Proc. HIAT'25, East Lansing, MI, USA, Jun. 2025, pp. 323-326. doi:10.18429/JACoW-HIAT2025-FRB02
[n]	D. D. Bhawalkar, “RECENT AND FUTURE ACCELERATOR ACTIVITIES IN INDIA”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper MOA04, pp. XX-XX. 
[n]	P. N. Ostroumov et al., “Advanced Beam-Dynamics Simulation Tools for RIA”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper MOP71, pp. 186-188. 
[n]	M. H. Donald, T. M. Himel, and S. Zelazny, “Diagnosis of Coupling and Beta Function Errors in the PEP-II B-Factory”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPLT162, pp. 2840-2842. 
[n]	Z. Sun, M. Liepe, and T. E. Oseroff, “First Demonstration of a ZrNb Alloyed Surface for Superconducting Radio-Frequency Cavities”, in Proc. NAPAC'22, Albuquerque, NM, USA, Aug. 2022, pp. 881-884. doi:10.18429/JACoW-NAPAC2022-THYE6

For LaTeX

Use Complete Form

For BibTeX

References

Back to search