Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] A. Hassanein, I. Konkashbaev, and J. Norem, “Thermoelastic Response of Suddenly Heated Liquid Targets in High-Power Colliders”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPAH071, pp. 3009-3011.
[n] P. Brown, E. Ciapala, G. Geschonke, and E. Peschardt, “Operation of Superconducting Cavities in LEP”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 54-57.
[n] D. Bruhwiler, J. R. Cary, R. E. Giacone, P. Mardahl, and J. Verboncoeur, “Simulations of Plasma Wakefield Acceleration with XOOPIC”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP2B04, pp. 877-879.
[n] X. Wu et al., “Installation, operations, and upgrade of a CS-30 cyclotron for the production of alpha emitters At-211 and Ac-225 at the Ionetix TAT facility”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper TUPB048, unpublished.
[n] M. Kesselman, C. Dawson, and G. Smith, “Beam Current Monitor Calibrator for the Spallation Neutron Source”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPB020, pp. 2453-2454.
[n] P. H?ñffner et al., “A Novel Automatic Focusing System for the Production of Radioisotopes for Theranostics”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2480-2482. doi:10.18429/JACoW-IPAC2021-TUPAB408
[n] A. Faltens and C. Kerns, “Fast Beam Choppers for the Electron-Ring Accelerator”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 1059-1061.
[n] B. Bingol et al., “Laser wakefield accelerator-driven photonuclear reactions for the production of medical radionuclide 67Cu”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper TUPB052, unpublished.
[n] D. Yu et al., “A Permanent-Magnet Focused X-Band Photoinjector”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA52, pp. 2003-2005.
[n] K. Satou et al., “Development of a Beam Induced Heat-Flow Monitor for the Beam Dump of the J-PARC RCS”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMN047, pp. 4084-4086.
[n] L. Tkachenko et al., “Comparison of Three Designs of Wide Aperture Dipole for SIS300 Ring”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPKF063, pp. 1747-1749.
[n] V. V. Paramonov, V. N. Leontiev, A. P. Dourkine, and A. Kolomiets, “Single Frequency High Intensity High Energy Normal Conducting Hadron Linac”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper THPSC07, pp. 330-332.
[n] C. W. Schmidt, L. J. Allen, E. S. McCrory, T. L. Owens, and M. B. Popovic, “Phase Scan Signature Matching for Linac Tuning”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1691-1694.
[n] M. Xia, H. Li, Y. Xu, Z. Zhao, and N. Yang, “Study of the radiation field from multiple out-coupling holes in an infrared free electron laser oscillator”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 435-437. doi:10.18429/JACoW-IPAC2024-MOPG73
[n] E. Z. Barzi et al., “An Innovative Nb3Sn Film Approach and Its Potential for SRF Applications”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 513-515. doi:10.18429/JACoW-LINAC2018-TUPO076
[n] M. Zhovner, H. Li, A. Miyazaki, T. Peterson, and R. Wedberg, “Status of High Power RF Stations for Acceptance Tests of the ESS Series Spoke Cryomodules”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, paper THPFAV001, pp..
[n] S. Dewan, F. Voelker, R. Holmes, K. Reiniger, and J. Zeng, “A 250 kW Four Quadrant Switch Mode Converter for the 1.4 GeV PS-Booster Beam Transfer Lines at CERN”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH015, pp. 3696-3698.
[n] R. Legg, B. Dunham, S. Higgins, R. Kazimi, D. Kehne, and T. Oren, “Interactive Troubleshooting Guide for Accelerators”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9P063, pp. 3755-3757.
[n] H. Kamitsubo, “Invited Paper: The RIKEN Linear Accelerator - Cyclotron System”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper F03, pp. 257-262.
[n] M. T. Crofford et al., “The Spallation Neutron Source Cryomodule Test Stand RF System”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC140, pp. 1395-1397.
[n] D. Newsham, Y. Luo, D. Yu, J. Zeng, and J. B. Rosenzweig, “Development of an X-Band PWT Photoinjector”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH088, pp. 2296-2298.
[n] V. Sabaiduc et al., “New High Intensity Compact Negative Hydrogen Ion Cyclotrons”, in Proc. Cyclotrons'10, Lanzhou, China, Sep. 2010, paper MOPCP017, pp. 81-83.
[n] Z. Zhao, Y. Xu, and H. Li, “Preliminary design of insertion devices at Hefei Advanced Light Facility”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1247-1249. doi:10.18429/JACoW-IPAC2023-MOPM115
[n] F. Bosco et al., “Preliminary tests for the diffusion bonding of high gradient cryogenic radio-frequency cavities”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 531-534. doi:10.18429/JACoW-IPAC2024-MOPR33
[n] M. Volpi et al., “Radiation Shielding Design for the X-Band Laboratory for Radio-Frequency Test Facility - X-Lab - at the University of Melbourne”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 724-727. doi:10.18429/JACoW-IPAC2022-MOPOMS040
[n] Q. Kerns, M. Popovic, and C. Kerns, “Spark Location in RF Cavities”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPR21, pp. 1838-1840.
[n] L. H. Chang, Ch. Wang, C. H. Chang, and T. C. Fan, “Passive End Pole Compensation Scheme for a 1.8 Tesla Wiggler”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAQ26, pp. 1450-1452.
[n] G. K. Sahoo, A. D. Ghodke, and G. Singh, “Study of INDUS-2 Lattice with Finite Dispersion”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 6D002, pp. 668-670.
[n] I. Bogdanov et al., “Study of the Quench Process in Fast-cycling Dipole for the SIS300 Ring”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPKF062, pp. 1744-1746.
[n] P. N. Ostroumov et al., “= 0.285 Half-Wave Resonator for FRIB”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper MOPO026, pp. 132-134.
[n] W. Fan, C. Feng, and Y. Lu, “Design of an isochronous achromat using transverse gradient undulators”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper WEPC34, unpublished.
[n] M. T. Crofford, X. Geng, T. W. Hardek, and T. L. Davidson, “The Spallation Neutron Source Eight-Channel Pulsed Power Meter”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP300, pp. 684-686.
[n] T. Wada, J. Fujita, T. Kambara, H. Kamitsubo, and H. Takebe, “Control System of the RIKEN Ring Cyclotron”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper I4-01, pp. 407-409.
[n] S. Bristol, C. Kerns, Q. Kerns, and H. W. Miller, “The Tevatron Global Radius and phis System”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2141-2144.
[n] M. G. Frith et al., “Instrumentation Development, Evaluation & Analysis (IDEA) Beamline for the APS-U”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, paper MOPC04, pp. XX-XX.
[n] A. V. Mishin and V. A. Polyakov, “Vacuum Getter Pump for Compact Accelerators”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2518-2520.
For LaTeX
Use Complete Form
For BibTeX
References
- A. Hassanein, I. Konkashbaev, and J. Norem, “Thermoelastic Response of Suddenly Heated Liquid Targets in High-Power Colliders”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPAH071, pp. 3009-3011.
- P. Brown, E. Ciapala, G. Geschonke, and E. Peschardt, “Operation of Superconducting Cavities in LEP”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 54-57.
- D. Bruhwiler, J. R. Cary, R. E. Giacone, P. Mardahl, and J. Verboncoeur, “Simulations of Plasma Wakefield Acceleration with XOOPIC”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP2B04, pp. 877-879.
- X. Wu et al., “Installation, operations, and upgrade of a CS-30 cyclotron for the production of alpha emitters At-211 and Ac-225 at the Ionetix TAT facility”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPB048, this conference.
- M. Kesselman, C. Dawson, and G. Smith, “Beam Current Monitor Calibrator for the Spallation Neutron Source”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPPB020, pp. 2453-2454.
- P. H?ñffner et al., “A Novel Automatic Focusing System for the Production of Radioisotopes for Theranostics”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2480-2482.
- A. Faltens and C. Kerns, “Fast Beam Choppers for the Electron-Ring Accelerator”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 1059-1061.
- B. Bingol et al., “Laser wakefield accelerator-driven photonuclear reactions for the production of medical radionuclide 67Cu”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPB052, this conference.
- D. Yu et al., “A Permanent-Magnet Focused X-Band Photoinjector”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEA52, pp. 2003-2005.
- K. Satou et al., “Development of a Beam Induced Heat-Flow Monitor for the Beam Dump of the J-PARC RCS”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRPMN047, pp. 4084-4086.
- L. Tkachenko et al., “Comparison of Three Designs of Wide Aperture Dipole for SIS300 Ring”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPKF063, pp. 1747-1749.
- V. V. Paramonov, V. N. Leontiev, A. P. Dourkine, and A. Kolomiets, “Single Frequency High Intensity High Energy Normal Conducting Hadron Linac”, in Proc. 24th Russian Particle Accelerator Conf. (RuPAC'14), Obninsk, Russia, Oct. 2014, paper THPSC07, pp. 330-332.
- C. W. Schmidt, L. J. Allen, E. S. McCrory, T. L. Owens, and M. B. Popovic, “Phase Scan Signature Matching for Linac Tuning”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1691-1694.
- M. Xia, H. Li, Y. Xu, Z. Zhao, and N. Yang, “Study of the radiation field from multiple out-coupling holes in an infrared free electron laser oscillator”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPG73, pp. 435-437.
- E. Z. Barzi et al., “An Innovative Nb3Sn Film Approach and Its Potential for SRF Applications”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 513-515.
- M. Zhovner, H. Li, A. Miyazaki, T. Peterson, and R. Wedberg, “Status of High Power RF Stations for Acceptance Tests of the ESS Series Spoke Cryomodules”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, paper THPFAV001, pp..
- S. Dewan, F. Voelker, R. Holmes, K. Reiniger, and J. Zeng, “A 250 kW Four Quadrant Switch Mode Converter for the 1.4 GeV PS-Booster Beam Transfer Lines at CERN”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper FPAH015, pp. 3696-3698.
- R. Legg, B. Dunham, S. Higgins, R. Kazimi, D. Kehne, and T. Oren, “Interactive Troubleshooting Guide for Accelerators”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9P063, pp. 3755-3757.
- H. Kamitsubo, “Invited Paper: The RIKEN Linear Accelerator - Cyclotron System”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper F03, pp. 257-262.
- M. T. Crofford et al., “The Spallation Neutron Source Cryomodule Test Stand RF System”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPC140, pp. 1395-1397.
- D. Newsham, Y. Luo, D. Yu, J. Zeng, and J. B. Rosenzweig, “Development of an X-Band PWT Photoinjector”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH088, pp. 2296-2298.
- V. Sabaiduc et al., “New High Intensity Compact Negative Hydrogen Ion Cyclotrons”, in Proc. 19th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'10), Lanzhou, China, Sep. 2010, paper MOPCP017, pp. 81-83.
- Z. Zhao, Y. Xu, and H. Li, “Preliminary design of insertion devices at Hefei Advanced Light Facility”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPM115, pp. 1247-1249.
- F. Bosco et al., “Preliminary tests for the diffusion bonding of high gradient cryogenic radio-frequency cavities”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPR33, pp. 531-534.
- M. Volpi et al., “Radiation Shielding Design for the X-Band Laboratory for Radio-Frequency Test Facility - X-Lab - at the University of Melbourne”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 724-727.
- Q. Kerns, M. Popovic, and C. Kerns, “Spark Location in RF Cavities”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WPR21, pp. 1838-1840.
- L. H. Chang, Ch. Wang, C. H. Chang, and T. C. Fan, “Passive End Pole Compensation Scheme for a 1.8 Tesla Wiggler”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper FAQ26, pp. 1450-1452.
- G. K. Sahoo, A. D. Ghodke, and G. Singh, “Study of INDUS-2 Lattice with Finite Dispersion”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 6D002, pp. 668-670.
- I. Bogdanov et al., “Study of the Quench Process in Fast-cycling Dipole for the SIS300 Ring”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPKF062, pp. 1744-1746.
- P. N. Ostroumov et al., “= 0.285 Half-Wave Resonator for FRIB”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper MOPO026, pp. 132-134.
- W. Fan, C. Feng, and Y. Lu, “Design of an isochronous achromat using transverse gradient undulators”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPC34, unpublished.
- M. T. Crofford, X. Geng, T. W. Hardek, and T. L. Davidson, “The Spallation Neutron Source Eight-Channel Pulsed Power Meter”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP300, pp. 684-686.
- T. Wada, J. Fujita, T. Kambara, H. Kamitsubo, and H. Takebe, “Control System of the RIKEN Ring Cyclotron”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper I4-01, pp. 407-409.
- S. Bristol, C. Kerns, Q. Kerns, and H. W. Miller, “The Tevatron Global Radius and phis System”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2141-2144.
- M. G. Frith et al., “Instrumentation Development, Evaluation & Analysis (IDEA) Beamline for the APS-U”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, paper MOPC04, pp. XX-XX.
- A. V. Mishin and V. A. Polyakov, “Vacuum Getter Pump for Compact Accelerators”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2518-2520.
Back to search