Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] C. Berthe, E. Lecorche, M. H. Moscatello, and G. Normand, “Machine Protection System for the SPIRAL2 Facility”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC042, pp. 178-180.
[n] G. Berger et al., “Production of an Intense 13N Radioactive Ion Beam”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 571-574.
[n] D. G. Morris et al., “RF System for FRIB Accelerator”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1765-1770. doi:10.18429/JACoW-IPAC2018-WEXGBF3
[n] J. Sekutowicz, K. Beard, P. Kneisel, C. Thomas, G. Wu, and S. Zheng, “Superstructures for High Current FEL Application”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPE013, pp. 1575-1577.
[n] P. A. Zavodszky et al., “Design, Construction and Commissioning of the SuSI ECR”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRXAB03, pp. 3766-3770.
[n] T. Kramer et al., “Considerations on the Fast Pulsed Magnet Systems for the 2 GeV Beam Transfer from the CERN PSB to PS”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3876-3878. doi:10.18429/JACoW-IPAC2015-THPF082
[n] G. N. Kim et al., “Nuclear Data Measurements with a Pulsed Neutron Facility based on an Electron Linac”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEB068, pp. 430-432.
[n] N. I. Bolibruch, R. Igarashi, and J. M. Vogt, “Photodiode Calibration using an Electrical Substitution Radiometer in the Hard X-ray Region”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper TUPD83, pp. 500-502.
[n] T. Katayama et al., “Present Status of Cooler Synchrotron TARN II”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 577-580.
[n] B. Goddard, B. Balhan, C. C. M. Borburgh, M. A. Fraser, L. S. Stoel, and F. M. Velotti, “The Use of a Passive Scatterer for SPS Slow Extraction Beam Loss Reduction”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 607-610. doi:10.18429/JACoW-IPAC2017-MOPIK044
[n] A. M. Sessler, “High-Intensity Effects in the Longitudinal Motion of Stored Particle Beams”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 854-858.
[n] K. D. Jacobs et al., “The Beam Profile Measuring System at the Bates Linac”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1523-1526.
[n] A. G. Valentinov et al., “New Superconducting Wigglers for KSRS”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 407-409. doi:10.18429/JACoW-RUPAC2018-THPSC04
[n] S. Kwon, M. S. Prokop, and A. Scheinker, “Robust Control of a Two-Input Two-Output (TITO) Multistate Cavity RF System ith Mismatched Uncertainty”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPC090, pp. 3494-3496.
[n] M. Fruneau, G. Campillo, B. Meillon, J. C. Ravel, M. Robin, and M. Tournier, “Beam Diagnostics and Control at SARA”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper FP-03, pp. 589-591.
[n] W. B. Mori, J. S. Wurtele, T. Katsouleas, G. Shvets, T. C. Chiou, and C. Decker, “Recent Work on Short Pulse Laser-Plasma Accelerators”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2635-2638.
[n] I. Lobov, A. Lutchev, M. N. Stolyarov, and S. A. Sukhov, “Software Service for Cryogenic Data Representation and Analysis”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper WEPSB040, pp. 263-265.
[n] M. J. Knott and F. Hornstra, “On-Line Computation and Presentation of External Proton Beam Line Targeting Information”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 377-379.
[n] R. P. Fliller et al., “Application of Machine Learning to Minimize Long Term Drifts in the NSLS-II Linac”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1867-1869. doi:10.18429/JACoW-IPAC2018-WEPAF022
[n] S. J. Burger, P. J. Celliers, Z. B. du Toit, G. S. Z. Guasco, L. M. Roels, and H. A. Smit, “On the Design of the Central Region of an 8 MeV Injector Cyclotron”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper B13, pp. 67-70.
[n] J. C. Brown and B. G. Chidley, “A High Power RF Supply for the Chalk River 100% Duty Factor Alvarez Linac”, in Proc. LINAC'76, Chalk River, Canada, Sep. 1976, paper E10, pp. 296-299.
[n] X. E. Lin and N. M. Kroll, “Minimum Wakefield Achievable by Waveguide Damped Cavity”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPR10, pp. 1809-1811.
[n] J. F. DeFord, N. J. Dionne, S. G. Ovtchinnikov, and J. J. Petillo, “Inclusion of Surface Roughness Effects in Emission Modeling With the MICHELLE Code”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP160, pp. 1788-1790.
[n] M. K. Craddock et al., “The TRIUMF Kaon Factory”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1707-1710.
[n] P. K. Sigg, “A Variable, High Speed Beam-Power Absorber”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper F2-05, pp. 212-215.
[n] K.-U. Kasemir and M. R. Pearson, “CS-Studio Scan System Parallelization”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 517-520. doi:10.18429/JACoW-ICALEPCS2015-TUA3O04
[n] A. I. Warwick, T. J. Fessenden, D. Keefe, C. H. Kim, and H. Meuth, “Performance of MBE-4, An Experimental Multiple Beam Induction Linear Accelerator for Heavy Ions”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 118-121.
[n] E. Matias et al., “ScienceStudio: A Project Status Update”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THP105, pp. 880-882.
[n] C.-Y. Tsai, J. Wu, C. Yang, G. Zhou, H.-S. Kang, and M. Yoon, “Numerical Simulation of Phase-Shift Method for Fel Power Enhancement in PAL-XFEL”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4402-4405. doi:10.18429/JACoW-IPAC2018-THPMK052
[n] R. E. Laxdal et al., “The ISAC-II Upgrade at TRIUMF - Progress and Developments”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper ROPA010, pp. 601-603.
[n] I. Lobov and V. Gotman, “Media Server for Video and Audio Exchange Between the U-70 Accelerator Complex Control Rooms: Current Status and Perspectives”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 423-425. doi:10.18429/JACoW-RUPAC2018-THPSC09
[n] M. Di Giacomo, “Design and Manufacturing Tools for RF Resonators at GANIL”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper B-06, pp. 175-178.
[n] A. Y. Murokh, R. B. Agustsson, P. Frigola, and V. Solovyov, “Development of Dy Poles for High Temperature Superconducting Undulator Applications”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5RFP077, pp. 2444-2446.
[n] J. C. Baron et al., “First Clinical Results Using Short-Lived Radioisotopes Produced by a Medical Cyclotron”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper E-14, pp. 2274-2276.
[n] E. Matias et al., “CLS: A Fully Open-Source Control System”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper ROPA002, pp. 136-139.
[n] A. Schempp, H. Deitinghoff, O. Engels, H. Homeyer, and W. Pelzer, “The First RFQ-Injector for a Cyclotron”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 566-569.
[n] A. G. Kobets et al., “Status of the LEPTA Project”, in Proc. COOL'07, Bad Kreuznach, Germany, Sep. 2007, paper WEM1C01, pp. 113-116.
[n] M. R. Shubaly and J. G. Plato, “A Multi-Channel Fibre-Optic Link for Analog Telemtry”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2296-2299.
[n] P. Mandrillon, F. Anton, F. Farley, N. Fietier, R. Savoy, and J. Y. Tang, “A Compact Facility for High Energy Proton Terapy based on a Superconducting Cyclotron”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2604-2607.
[n] V. Chohan et al., “LHC Magnet Tests: Operational Techniques and Empowerment for Successful Completion”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FROAKI02, pp. 3742-3744.
[n] C. Bovet, N. Adams, E. Rossa, and A. Simonin, “Single Shot Bunch Length Measurement at LEP by Stochastic Sampling of Synchrotron Light Photons”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 762-765.
[n] P. Goudket et al., “Superconducting Thin Film Test Cavity Commissioning”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper TUPB064, pp. 731-734.
[n] B. W. Allardyce, A. Fiebig, G. Le Dallic, J. H. B. Madsen, and P. H. Standley, “Status Report on CERN SC”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper B-06, pp. 1979-1983.
[n] K. Batchelor, J. Galayda, and R. Hawrylak, “R.F. Cavity Design for the NSLS”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2839-2842.
[n] A. Miyazaki, K. Fransson, K. J. Gajewski, L. Hermansson, and J. M. Y. Ruber, “First Vertical Test of a Prototype Crab Cavity for HL-LHC at FREIA Laboratory in Uppsala University”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 313. doi:10.18429/JACoW-SRF2021-MOPFAV004
[n] P. V. Bogdanov et al., “103 and 60 cm Compact Cyclotron Engineering”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper B-18, pp. 2030-2032.
[n] J. T. Collins, H. Cease, S. J. Izzo, Z. Liu, J. Nudell, and C. A. Preissner, “Preliminary Design of the Magnet Support and Alignment Systems for the Aps-U Storage Ring”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 87-89. doi:10.18429/JACoW-MEDSI2016-MOPE34
[n] L. Shaw, “LXI Instrumentation, with EPICS IOCs, for Remote Waveform Monitoring & Analysis”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEP044, pp. XX-XX.
[n] M. Mizumoto et al., “A High Intensity Proton Linac Development for the JAERI Neutron Science Project”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TU1004, pp. 349-356.
[n] M. McMahan, B. Feinberg, D. Hubbard, and S. Meaney, “Stripping with a Fomblin Supersonic Jet at 112.5 keV/Nucleon”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper MO3-19, pp. 88-90.
[n] R. Varela et al., “Beam Induced Fluorescence Measurements of 100 keV Deuterons in LIPAc Accelerator”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1877-1880. doi:10.18429/JACoW-IPAC2018-WEPAF026
[n] D. Gonnella et al., “RF Performance of Nitrogen-Doped Production SRF Cavities for LCLS-II”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1156-1159. doi:10.18429/JACoW-IPAC2017-MOPVA128
[n] M. Di Carlo, M. Dolci, P. Harding, J. B. Morgado, P. Osorio, and U. Y. Yilmaz, “SKA Tango Operator”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1155-1159. doi:10.18429/JACoW-ICALEPCS2023-TH2AO06
[n] B. Rusnak et al., “Superconducting Multicell Cavity Development Program at Los Alamos”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1021-1024.
[n] E. Matias, “Friday Closeout Presentation”, in Proc. PCaPAC'10, Saskatoon, Canada, Oct. 2010, paper FRTA01, pp. 219-219.
[n] C. Cuevas et al., “The Upgrade Path from Legacy VME to VXS Dual Star Connectivity for Large Scale Data Acquisition and Trigger Systems”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper TUBAULT03, pp. 550-553.
[n] U. Becker, “CST's Commercial Beam-Physics Codes”, in Proc. ICAP'06, Chamonix, Switzerland, Oct. 2006, paper WESEPP01, pp. 228-228.
[n] K. Zwoll, B. Peters, and T. Vashegyi, “A Low Cost Local Area Network for Connecting Accelerator Equipment”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2077-2080.
[n] H. G. Blosser, D. A. Johnson, and J. Schubert, “Invited Paper: Problems and Accomplishments of Superconducting Cyclotrons”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper N-01, pp. 674-684.
[n] J. H. Yue, R. X. Yuan, L. Ma, and J. Cao, “The Design of the Stripline Kicker for the BEPCII Transverse Feedback System”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper THP16007, pp. XX-XX.
[n] J. A. Doyle et al., “Development of the Manufacturing and QA Processes for the LCLS-II Injector Source VHF Electron Gun”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2815-2817. doi:10.18429/JACoW-IPAC2017-WEPAB099
[n] W. M. Fawley et al., “Time-dependent Degradation of an Ion-Focused ATA Beam”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1489-1492.
[n] M. Olivo, U. Rohrer, and E. Steiner, “An Electrostatic Beam Splitter for the SIN 590 MeV Proton Beam Line”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3094-3097.
[n] Q. Qin et al., “Overview of the CEPC Accelerator”, in Proc. HF'14, Beijing, China, Oct. 2014, paper THP3H2, pp. 16-21.
[n] A. J. T. Ramaila et al., “Control System Simulation Using DSEE High Level Instrument Interface and Behavioural Description”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 292-297. doi:10.18429/JACoW-ICALEPCS2017-TUDPL03
[n] T. Satogata et al., “RHIC Low Energy Tests and Initial Operations”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6PFP009, pp. 2498-2500.
[n] P. Kramer, H. L. Hagedoorn, and N. F. Verster, “The Central Region of the Philips AVF Cyclotron”, in Proc. Cyclotrons'63, Geneva, Switzerland, Apr. 1963, paper CYC63E07, pp. XX-XX.
[n] V. Baldini et al., “A PLC-Based System for the Control of an Educational Observatory”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC054, pp. 691-694.
[n] J. Rodríguez Pérez, A. Bonatto, C. Bontoiu, G. Xia, J. Resta-Lopez, and P. Martín-Luna, “Optimization of nanostructured plasmas for laser wakefield acceleration using a Bayesian algorithm”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1064-1067. doi:10.18429/JACoW-IPAC2024-TUPC29
[n] J. Tang, L. Liu, J. Qiu, G. H. Wei, J. Wei, and C. Zhang, “Beam Preparation for the Injection into CSNS RCS”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper WGC12, pp. 320-325.
[n] J. Stiller, H. S. Matis, R. Miyamoto, A. Ratti, W. C. Turner, and S. M. White, “Simulation of the LHC BRAN Luminosity Monitor for High Luminosity Interaction Regions”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEC020, pp. 498-500.
[n] L. M. Onischenko et al., “DEVELOPMENT OF COMPACT CYCLOTRON FOR EXPLOSIVES DETECTION BY NUCLEAR RESONANCE ABSORPTION OF GAMMA-RAYS IN NITROGEN”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper WENO02, pp. XX-XX.
[n] L. Xiao, D. Tong, H. Zhang, S. Hu, and Y. Lin, “Measurements of Higher Order Mode in an X-Band Accelerator”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 4D040, pp. 181-183.
[n] A. J. Otter, C. Haddock, P. Reeve, and P. Schwandt, “Prototype Magnet Designs and Loss Measurements for the Dual Frequency Booster Synchrotron for TRIUMF's KAON Factory”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 390-393.
[n] J. Haimson, B. Mecklenburg, and V. Valencia, “A Wide Dynamic Range 10 MeV High Current Electron Linear Accelerator”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1303-1307.
[n] O. K. Mulvany, B. Billett, B. Brajuskovic, J. A. Carter, A. McElderry, and K. J. Wakefield, “NEG-Coated Copper Vacuum Chambers for the APS-Upgrade Storage Ring Vacuum System”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 477-479. doi:10.18429/JACoW-NAPAC2019-TUPLS11
[n] D. L. Hall, M. Liepe, D. Liarte, and J. P. Sethna, “Impact of Trapped Magnetic Flux and Thermal Gradients on the Performance of Nb3Sn Cavities”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1127-1129. doi:10.18429/JACoW-IPAC2017-MOPVA118
[n] J. F. Zhang et al., “A Particle-in-Cell/Monte-Carlo-Collision Code for the Simulation of Stepwise Ionization of Lithium in 2.45 GHz ECR Ion Source”, in Proc. ECRIS'18, Catania, Italy, Sep. 2018, pp. 148-151. doi:10.18429/JACoW-ECRIS2018-TUP26
[n] J. M. Byrd et al., “First Observations of a ``Fast Beam-Ion Instability'' at the ALS”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 3B011, pp. 1563-1565.
[n] W. Kleeven et al., “Status and Results from the TR30 Cycltron Centre Region Model”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 434-437.
[n] D. Yu, G. Biallas, Y. Luo, D. Newsham, and A. V. Smirnov, “Wedge-Shaped, Large-Aperture, Dipole Magnet Design for the Jefferson Lab FEL Upgrade”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAB041, pp. 2123-2125.
[n] N. M. Kroll, J.-S. Kim, and D. U. L. Yu, “Computer Determination of the Scattering Matrix Properties of N-Port Cavities”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper MO4-61, pp. 217-219.
[n] O. Calvo, C. Sibley, and T. Russ, “High Stability Switching Mode Power Converters for Magnet Loads”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TU466, pp. 493-495.
[n] C. Jamet, T. A. Andr?®, C. Doutresssoulles, W. Le Coz, and E. Swartvagher, “Phase and Amplitude Measurements for the SPIRAL2 Accelerator”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper TUPD17, pp. 327-329.
[n] C. J. Bocchetta et al., “First Measurements of the Elettra 100 MeV Pre-Injector”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TU4-07, pp. 311-313.
[n] S. R. Norum et al., “The Machine Protection System for the Linac Coherent Light Source”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5REP039, pp. 4856-4858.
[n] J. C. Schuchman, J. Aloia, H. Hsieh, T. Kim, and S. Pjerov, “X-Ray Lithography Source (SXLS) Vacuum System”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 569-571.
[n] K. M. Wilson et al., “Production of Copper-Plated Beamline Bellows and Spools for LCLS-II”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1167-1169. doi:10.18429/JACoW-IPAC2017-MOPVA132
[n] H.-D. Gr?ñf et al., “Progress and Status of the S-DALINAC”, in Proc. SRF'93, Newport News, VA, USA, Oct. 1993, paper SRF93J09, pp. XX-XX.
[n] A. Grudiev et al., “A High-Power Test of an X-Band Molybdenum-Iris Structure”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper THP34, pp. 678-680.
[n] A. Farricker, P. Kramer, B. K. Popovic, E. Sunar, C. Vollinger, and M. Wendt, “Identification of Imperfections in Impedance Shields on the SPS-QF Flanges via Non-Intrusive Measurements”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3119-3122. doi:10.18429/JACoW-IPAC2018-THPAF063
[n] H. Takeda and J. Billen, “Recent Improvements in the PARMILA Code”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper FPAG028, pp. 3518-3520.
[n] J. L. Li et al., “Conceptual Design of HEPS Injector”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1394-1397. doi:10.18429/JACoW-IPAC2018-TUPMF058
[n] W. Schimmerling et al., “The Bevalac Minibeam Facility”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1049-1052.
[n] J. W. Xia et al., “HIRFL Status and HIRFL-CSR Project in Lanzhou”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5B002, pp. 342-347.
[n] M. Pivi, M. Furman, and T. O. Raubenheimer, “Recent Electron-Cloud Simulation Results for the Main Damping Rings of the NLC and TESLA Linear Colliders”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPPG023, pp. 3219-3221.
[n] K. J. Wakefield et al., “Sample and Detector Positioning Instruments for the Wide Angle XPCS End Station at 8-ID-E, a Feature Beamline for the APS Upgrade”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 333. doi:10.18429/JACoW-MEDSI2020-WEPC13
For LaTeX
Use Complete Form
For BibTeX
References
- C. Berthe, E. Lecorche, M. H. Moscatello, and G. Normand, “Machine Protection System for the SPIRAL2 Facility”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC042, pp. 178-180.
- G. Berger et al., “Production of an Intense 13N Radioactive Ion Beam”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 571-574.
- D. G. Morris et al., “RF System for FRIB Accelerator”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1765-1770.
- J. Sekutowicz, K. Beard, P. Kneisel, C. Thomas, G. Wu, and S. Zheng, “Superstructures for High Current FEL Application”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPPE013, pp. 1575-1577.
- P. A. Zavodszky et al., “Design, Construction and Commissioning of the SuSI ECR”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRXAB03, pp. 3766-3770.
- T. Kramer et al., “Considerations on the Fast Pulsed Magnet Systems for the 2 GeV Beam Transfer from the CERN PSB to PS”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3876-3878.
- G. N. Kim et al., “Nuclear Data Measurements with a Pulsed Neutron Facility based on an Electron Linac”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEB068, pp. 430-432.
- N. I. Bolibruch, R. Igarashi, and J. M. Vogt, “Photodiode Calibration using an Electrical Substitution Radiometer in the Hard X-ray Region”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper TUPD83, pp. 500-502.
- T. Katayama et al., “Present Status of Cooler Synchrotron TARN II”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 577-580.
- B. Goddard, B. Balhan, C. C. M. Borburgh, M. A. Fraser, L. S. Stoel, and F. M. Velotti, “The Use of a Passive Scatterer for SPS Slow Extraction Beam Loss Reduction”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 607-610.
- A. M. Sessler, “High-Intensity Effects in the Longitudinal Motion of Stored Particle Beams”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 854-858.
- K. D. Jacobs et al., “The Beam Profile Measuring System at the Bates Linac”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1523-1526.
- A. G. Valentinov et al., “New Superconducting Wigglers for KSRS”, in Proc. 26th Russian Particle Accelerator Conf. (RuPAC'18), Protvino, Russia, Oct. 2018, pp. 407-409.
- S. Kwon, M. S. Prokop, and A. Scheinker, “Robust Control of a Two-Input Two-Output (TITO) Multistate Cavity RF System ith Mismatched Uncertainty”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPC090, pp. 3494-3496.
- M. Fruneau, G. Campillo, B. Meillon, J. C. Ravel, M. Robin, and M. Tournier, “Beam Diagnostics and Control at SARA”, in Proc. 9th Int. Cyclotron Conf. and Their Applications (Cyclotrons'81), Caen, France, Sep. 1981, paper FP-03, pp. 589-591.
- W. B. Mori, J. S. Wurtele, T. Katsouleas, G. Shvets, T. C. Chiou, and C. Decker, “Recent Work on Short Pulse Laser-Plasma Accelerators”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2635-2638.
- I. Lobov, A. Lutchev, M. N. Stolyarov, and S. A. Sukhov, “Software Service for Cryogenic Data Representation and Analysis”, in Proc. 22nd Russian Particle Accelerator Conf. (RuPAC'10), Protvino, Russia, Sep.-Oct. 2010, paper WEPSB040, pp. 263-265.
- M. J. Knott and F. Hornstra, “On-Line Computation and Presentation of External Proton Beam Line Targeting Information”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 377-379.
- R. P. Fliller et al., “Application of Machine Learning to Minimize Long Term Drifts in the NSLS-II Linac”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1867-1869.
- S. J. Burger, P. J. Celliers, Z. B. du Toit, G. S. Z. Guasco, L. M. Roels, and H. A. Smit, “On the Design of the Central Region of an 8 MeV Injector Cyclotron”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper B13, pp. 67-70.
- J. C. Brown and B. G. Chidley, “A High Power RF Supply for the Chalk River 100% Duty Factor Alvarez Linac”, in Proc. 1976 Proton Linear Accelerator Conf. (LINAC'76), Chalk River, Canada, Sep. 1976, paper E10, pp. 296-299.
- X. E. Lin and N. M. Kroll, “Minimum Wakefield Achievable by Waveguide Damped Cavity”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WPR10, pp. 1809-1811.
- J. F. DeFord, N. J. Dionne, S. G. Ovtchinnikov, and J. J. Petillo, “Inclusion of Surface Roughness Effects in Emission Modeling With the MICHELLE Code”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP160, pp. 1788-1790.
- M. K. Craddock et al., “The TRIUMF Kaon Factory”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 1707-1710.
- P. K. Sigg, “A Variable, High Speed Beam-Power Absorber”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper F2-05, pp. 212-215.
- K.-U. Kasemir and M. R. Pearson, “CS-Studio Scan System Parallelization”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 517-520.
- A. I. Warwick, T. J. Fessenden, D. Keefe, C. H. Kim, and H. Meuth, “Performance of MBE-4, An Experimental Multiple Beam Induction Linear Accelerator for Heavy Ions”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 118-121.
- E. Matias et al., “ScienceStudio: A Project Status Update”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper THP105, pp. 880-882.
- C.-Y. Tsai, J. Wu, C. Yang, G. Zhou, H.-S. Kang, and M. Yoon, “Numerical Simulation of Phase-Shift Method for Fel Power Enhancement in PAL-XFEL”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4402-4405.
- R. E. Laxdal et al., “The ISAC-II Upgrade at TRIUMF - Progress and Developments”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper ROPA010, pp. 601-603.
- I. Lobov and V. Gotman, “Media Server for Video and Audio Exchange Between the U-70 Accelerator Complex Control Rooms: Current Status and Perspectives”, in Proc. 26th Russian Particle Accelerator Conf. (RuPAC'18), Protvino, Russia, Oct. 2018, pp. 423-425.
- M. Di Giacomo, “Design and Manufacturing Tools for RF Resonators at GANIL”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper B-06, pp. 175-178.
- A. Y. Murokh, R. B. Agustsson, P. Frigola, and V. Solovyov, “Development of Dy Poles for High Temperature Superconducting Undulator Applications”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5RFP077, pp. 2444-2446.
- J. C. Baron et al., “First Clinical Results Using Short-Lived Radioisotopes Produced by a Medical Cyclotron”, in Proc. 8th Int. Cyclotron Conf. and Their Applications (Cyclotrons'78), Bloomington, IN, USA, Sep. 1978, paper E-14, pp. 2274-2276.
- E. Matias et al., “CLS: A Fully Open-Source Control System”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper ROPA002, pp. 136-139.
- A. Schempp, H. Deitinghoff, O. Engels, H. Homeyer, and W. Pelzer, “The First RFQ-Injector for a Cyclotron”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 566-569.
- A. G. Kobets et al., “Status of the LEPTA Project”, in Proc. 6th Workshop on Beam Cooling and Related Topics (COOL'07), Bad Kreuznach, Germany, Sep. 2007, paper WEM1C01, pp. 113-116.
- M. R. Shubaly and J. G. Plato, “A Multi-Channel Fibre-Optic Link for Analog Telemtry”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2296-2299.
- P. Mandrillon, F. Anton, F. Farley, N. Fietier, R. Savoy, and J. Y. Tang, “A Compact Facility for High Energy Proton Terapy based on a Superconducting Cyclotron”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2604-2607.
- V. Chohan et al., “LHC Magnet Tests: Operational Techniques and Empowerment for Successful Completion”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FROAKI02, pp. 3742-3744.
- C. Bovet, N. Adams, E. Rossa, and A. Simonin, “Single Shot Bunch Length Measurement at LEP by Stochastic Sampling of Synchrotron Light Photons”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 762-765.
- P. Goudket et al., “Superconducting Thin Film Test Cavity Commissioning”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper TUPB064, pp. 731-734.
- B. W. Allardyce, A. Fiebig, G. Le Dallic, J. H. B. Madsen, and P. H. Standley, “Status Report on CERN SC”, in Proc. 8th Int. Cyclotron Conf. and Their Applications (Cyclotrons'78), Bloomington, IN, USA, Sep. 1978, paper B-06, pp. 1979-1983.
- K. Batchelor, J. Galayda, and R. Hawrylak, “R.F. Cavity Design for the NSLS”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2839-2842.
- A. Miyazaki, K. Fransson, K. J. Gajewski, L. Hermansson, and J. M. Y. Ruber, “First Vertical Test of a Prototype Crab Cavity for HL-LHC at FREIA Laboratory in Uppsala University”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 313.
- P. V. Bogdanov et al., “103 and 60 cm Compact Cyclotron Engineering”, in Proc. 8th Int. Cyclotron Conf. and Their Applications (Cyclotrons'78), Bloomington, IN, USA, Sep. 1978, paper B-18, pp. 2030-2032.
- J. T. Collins, H. Cease, S. J. Izzo, Z. Liu, J. Nudell, and C. A. Preissner, “Preliminary Design of the Magnet Support and Alignment Systems for the Aps-U Storage Ring”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 87-89.
- L. Shaw, “LXI Instrumentation, with EPICS IOCs, for Remote Waveform Monitoring & Analysis”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WEP044, pp. XX-XX.
- M. Mizumoto et al., “A High Intensity Proton Linac Development for the JAERI Neutron Science Project”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TU1004, pp. 349-356.
- M. McMahan, B. Feinberg, D. Hubbard, and S. Meaney, “Stripping with a Fomblin Supersonic Jet at 112.5 keV/Nucleon”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper MO3-19, pp. 88-90.
- R. Varela et al., “Beam Induced Fluorescence Measurements of 100 keV Deuterons in LIPAc Accelerator”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1877-1880.
- D. Gonnella et al., “RF Performance of Nitrogen-Doped Production SRF Cavities for LCLS-II”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1156-1159.
- M. Di Carlo, M. Dolci, P. Harding, J. B. Morgado, P. Osorio, and U. Y. Yilmaz, “SKA Tango Operator”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper TH2AO06, pp. 1155-1159.
- B. Rusnak et al., “Superconducting Multicell Cavity Development Program at Los Alamos”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1021-1024.
- E. Matias, “Friday Closeout Presentation”, in Proc. 8th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'10), Saskatoon, Canada, Oct. 2010, paper FRTA01, pp. 219-219.
- C. Cuevas et al., “The Upgrade Path from Legacy VME to VXS Dual Star Connectivity for Large Scale Data Acquisition and Trigger Systems”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper TUBAULT03, pp. 550-553.
- U. Becker, “CST's Commercial Beam-Physics Codes”, in Proc. 9th Int. Computational Accelerator Physics Conf. (ICAP'06), Chamonix, Switzerland, Oct. 2006, paper WESEPP01, pp. 228-228.
- K. Zwoll, B. Peters, and T. Vashegyi, “A Low Cost Local Area Network for Connecting Accelerator Equipment”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2077-2080.
- H. G. Blosser, D. A. Johnson, and J. Schubert, “Invited Paper: Problems and Accomplishments of Superconducting Cyclotrons”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper N-01, pp. 674-684.
- J. H. Yue, R. X. Yuan, L. Ma, and J. Cao, “The Design of the Stripline Kicker for the BEPCII Transverse Feedback System”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper THP16007, pp. XX-XX.
- J. A. Doyle et al., “Development of the Manufacturing and QA Processes for the LCLS-II Injector Source VHF Electron Gun”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2815-2817.
- W. M. Fawley et al., “Time-dependent Degradation of an Ion-Focused ATA Beam”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1489-1492.
- M. Olivo, U. Rohrer, and E. Steiner, “An Electrostatic Beam Splitter for the SIN 590 MeV Proton Beam Line”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3094-3097.
- Q. Qin et al., “Overview of the CEPC Accelerator”, in Proc. 55th ICFA Advanced Beam Dynamics Workshop on High Luminosity Circular e+e- Colliders - Higgs Factory (HF'14), Beijing, China, Oct. 2014, paper THP3H2, pp. 16-21.
- A. J. T. Ramaila et al., “Control System Simulation Using DSEE High Level Instrument Interface and Behavioural Description”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 292-297.
- T. Satogata et al., “RHIC Low Energy Tests and Initial Operations”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6PFP009, pp. 2498-2500.
- P. Kramer, H. L. Hagedoorn, and N. F. Verster, “The Central Region of the Philips AVF Cyclotron”, in Proc. Int. Conf. on Sector-Focused Cyclotrons and Meson Factories (Cyclotrons'63), Geneva, Switzerland, Apr. 1963, paper CYC63E07, pp. XX-XX.
- V. Baldini et al., “A PLC-Based System for the Control of an Educational Observatory”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC054, pp. 691-694.
- J. Rodríguez Pérez, A. Bonatto, C. Bontoiu, G. Xia, J. Resta-Lopez, and P. Martín-Luna, “Optimization of nanostructured plasmas for laser wakefield acceleration using a Bayesian algorithm”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPC29, pp. 1064-1067.
- J. Tang, L. Liu, J. Qiu, G. H. Wei, J. Wei, and C. Zhang, “Beam Preparation for the Injection into CSNS RCS”, in Proc. 42nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'08), Nashville, TN, USA, Aug. 2008, paper WGC12, pp. 320-325.
- J. Stiller, H. S. Matis, R. Miyamoto, A. Ratti, W. C. Turner, and S. M. White, “Simulation of the LHC BRAN Luminosity Monitor for High Luminosity Interaction Regions”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEC020, pp. 498-500.
- L. M. Onischenko et al., “DEVELOPMENT OF COMPACT CYCLOTRON FOR EXPLOSIVES DETECTION BY NUCLEAR RESONANCE ABSORPTION OF GAMMA-RAYS IN NITROGEN”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper WENO02, pp. XX-XX.
- L. Xiao, D. Tong, H. Zhang, S. Hu, and Y. Lin, “Measurements of Higher Order Mode in an X-Band Accelerator”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 4D040, pp. 181-183.
- A. J. Otter, C. Haddock, P. Reeve, and P. Schwandt, “Prototype Magnet Designs and Loss Measurements for the Dual Frequency Booster Synchrotron for TRIUMF's KAON Factory”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 390-393.
- J. Haimson, B. Mecklenburg, and V. Valencia, “A Wide Dynamic Range 10 MeV High Current Electron Linear Accelerator”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1303-1307.
- O. K. Mulvany, B. Billett, B. Brajuskovic, J. A. Carter, A. McElderry, and K. J. Wakefield, “NEG-Coated Copper Vacuum Chambers for the APS-Upgrade Storage Ring Vacuum System”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 477-479.
- D. L. Hall, M. Liepe, D. Liarte, and J. P. Sethna, “Impact of Trapped Magnetic Flux and Thermal Gradients on the Performance of Nb3Sn Cavities”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1127-1129.
- J. F. Zhang et al., “A Particle-in-Cell/Monte-Carlo-Collision Code for the Simulation of Stepwise Ionization of Lithium in 2.45 GHz ECR Ion Source”, in Proc. 23th International Workshop on ECR Ion Sources (ECRIS'18), Catania, Italy, Sep. 2018, pp. 148-151.
- J. M. Byrd et al., “First Observations of a ``Fast Beam-Ion Instability'' at the ALS”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 3B011, pp. 1563-1565.
- W. Kleeven et al., “Status and Results from the TR30 Cycltron Centre Region Model”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 434-437.
- D. Yu, G. Biallas, Y. Luo, D. Newsham, and A. V. Smirnov, “Wedge-Shaped, Large-Aperture, Dipole Magnet Design for the Jefferson Lab FEL Upgrade”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPAB041, pp. 2123-2125.
- N. M. Kroll, J.-S. Kim, and D. U. L. Yu, “Computer Determination of the Scattering Matrix Properties of N-Port Cavities”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper MO4-61, pp. 217-219.
- O. Calvo, C. Sibley, and T. Russ, “High Stability Switching Mode Power Converters for Magnet Loads”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TU466, pp. 493-495.
- C. Jamet, T. A. Andr?®, C. Doutresssoulles, W. Le Coz, and E. Swartvagher, “Phase and Amplitude Measurements for the SPIRAL2 Accelerator”, in Proc. 9th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'09), Basel, Switzerland, May 2009, paper TUPD17, pp. 327-329.
- C. J. Bocchetta et al., “First Measurements of the Elettra 100 MeV Pre-Injector”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TU4-07, pp. 311-313.
- S. R. Norum et al., “The Machine Protection System for the Linac Coherent Light Source”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5REP039, pp. 4856-4858.
- J. C. Schuchman, J. Aloia, H. Hsieh, T. Kim, and S. Pjerov, “X-Ray Lithography Source (SXLS) Vacuum System”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 569-571.
- K. M. Wilson et al., “Production of Copper-Plated Beamline Bellows and Spools for LCLS-II”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1167-1169.
- H.-D. Gr?ñf et al., “Progress and Status of the S-DALINAC”, in Proc. 6th Int. Conf. RF Superconductivity (SRF'93), Newport News, VA, USA, Oct. 1993, paper SRF93J09, pp. XX-XX.
- A. Grudiev et al., “A High-Power Test of an X-Band Molybdenum-Iris Structure”, in Proc. 22nd Linear Accelerator Conf. (LINAC'04), Lübeck, Germany, Aug. 2004, paper THP34, pp. 678-680.
- A. Farricker, P. Kramer, B. K. Popovic, E. Sunar, C. Vollinger, and M. Wendt, “Identification of Imperfections in Impedance Shields on the SPS-QF Flanges via Non-Intrusive Measurements”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3119-3122.
- H. Takeda and J. Billen, “Recent Improvements in the PARMILA Code”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper FPAG028, pp. 3518-3520.
- J. L. Li et al., “Conceptual Design of HEPS Injector”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1394-1397.
- W. Schimmerling et al., “The Bevalac Minibeam Facility”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1049-1052.
- J. W. Xia et al., “HIRFL Status and HIRFL-CSR Project in Lanzhou”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 5B002, pp. 342-347.
- M. Pivi, M. Furman, and T. O. Raubenheimer, “Recent Electron-Cloud Simulation Results for the Main Damping Rings of the NLC and TESLA Linear Colliders”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPPG023, pp. 3219-3221.
- K. J. Wakefield et al., “Sample and Detector Positioning Instruments for the Wide Angle XPCS End Station at 8-ID-E, a Feature Beamline for the APS Upgrade”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 333.
Back to search