Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] T. L. Lavine et al., “Binary RF Pulse Compression Experiment at SLAC”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 940-943.
[n] W. T. Kitka, M. K. Falowski, A. M. Marendziak, N. Olszowska, and M. Zaj, “Automation in NSRC SOLARIS With Python and Tango Controls”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 381. doi:10.18429/JACoW-ICALEPCS2019-MOPHA072
[n] M. N. Fodje, R. Berg, G. Black, P. Grochulski, and K. Janzen, “Automation of the Macromolecular Crystallography Beamlines at the Canadian Light Source”, in Proc. PCaPAC'10, Saskatoon, Canada, Oct. 2010, paper THPL005, pp. 130-132.
[n] L. Bertolini et al., “Design of the Linear Non-Evaporable Getter Pump for the PEP-II B-Factory”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4P016, pp. 3622-3624.
[n] R. Mitzner, W. Eberhardt, M. Neeb, T. Noll, M. Rutkowski, and H. Zacharias, “A Beam Splitter and Delay Line for Autocorrelation and Pump-Probe Experiments at Soft X-Ray FELs”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper TUPPH066, pp. XX-XX.
[n] C. E. Reece et al., “Performance of the CEBAF prototype cryomodule renascence”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper WEP32, pp. XX-XX.
[n] S. Farina, J. H. Lee, J. P. S. Martins, and D. P. Piso, “MicroTCA Generic Data Acquisition Systems at ESS”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 118-124. doi:10.18429/JACoW-ICALEPCS2017-TUAPL01
[n] S. Deghaye, M. Lamont, L. Mestre, M. Misiowiec, W. Sliwinski, and G. Kruk, “LHC Software Architecture [LSA] -- Evolution Toward LHC Beam Commissioning”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper WOPA03, pp. 307-309.
[n] B. Di Girolamo et al., “The Monitoring of the Effects of Earth Surface Inclination With the Precision Laser Inclinometer for High Luminosity Colliders”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 210-212. doi:10.18429/JACoW-RUPAC2016-THCBSH04
[n] R. Ollier, P. Alexandre, R. Ben El Fekih, and L. S. Nadolski, “Design and Commissioning of a Multipole Injection Kicker for the SOLEIL Storage Ring”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3525-3528. doi:10.18429/JACoW-IPAC2021-WEPAB353
[n] J. P. S. Martins, S. Farina, J. H. Lee, and D. P. Piso, “MicroTCA.4 Integration at ESS: From the Front-End Electronics to the EPICS OPI”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1692-1694. doi:10.18429/JACoW-ICALEPCS2017-THPHA133
[n] P. Bellomo et al., “Status of the PEP-II B-Factory High Energy Ring”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP128G, pp. 466-470.
[n] D. McGinnis, V. K. Bharadwaj, and J. Marriner, “Coupled Bunch Dipole Mode Measurements of Accelerating Beam in the Fermilab Booster”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1255-1258.
[n] S. Mitsunobu et al., “High Power Test of the Input Coupler for KEKB SC Cavity”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper SRF95F36, pp. 735-739.
[n] O. Capatina et al., “Overview of the Large Hadron Collider Cryo-magnets Logistics”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH181, pp. 3221-3223.
[n] W. T. Kitka et al., “Heating Unit Controller at NSRC SOLARIS”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3885-3887. doi:10.18429/JACoW-IPAC2018-THPAL106
[n] R. Tavcar, J. Dedic, E. Erjavec, R. Modic, M. Liu, and C. X. Yin, “Fast Machine Interlock Platform for Reliable Machine Protection Systems”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 4119-4121. doi:10.18429/JACoW-IPAC2016-THPOY016
[n] R. J. Jim?®nez Estupi???ín et al., “Enhancing the Detector Control System of the CMS Experiment with Object Oriented Modelling”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 145-148. doi:10.18429/JACoW-ICALEPCS2015-MOPGF025
For LaTeX
Use Complete Form
For BibTeX
References
- T. L. Lavine et al., “Binary RF Pulse Compression Experiment at SLAC”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 940-943.
- W. T. Kitka, M. K. Falowski, A. M. Marendziak, N. Olszowska, and M. Zaj, “Automation in NSRC SOLARIS With Python and Tango Controls”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 381.
- M. N. Fodje, R. Berg, G. Black, P. Grochulski, and K. Janzen, “Automation of the Macromolecular Crystallography Beamlines at the Canadian Light Source”, in Proc. 8th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'10), Saskatoon, Canada, Oct. 2010, paper THPL005, pp. 130-132.
- L. Bertolini et al., “Design of the Linear Non-Evaporable Getter Pump for the PEP-II B-Factory”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 4P016, pp. 3622-3624.
- R. Mitzner, W. Eberhardt, M. Neeb, T. Noll, M. Rutkowski, and H. Zacharias, “A Beam Splitter and Delay Line for Autocorrelation and Pump-Probe Experiments at Soft X-Ray FELs”, in Proc. 28th Int. Free Electron Laser Conf. (FEL'06), Berlin, Germany, Aug.-Sep. 2006, paper TUPPH066, pp. XX-XX.
- C. E. Reece et al., “Performance of the CEBAF prototype cryomodule renascence”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper WEP32, pp. XX-XX.
- S. Farina, J. H. Lee, J. P. S. Martins, and D. P. Piso, “MicroTCA Generic Data Acquisition Systems at ESS”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 118-124.
- S. Deghaye, M. Lamont, L. Mestre, M. Misiowiec, W. Sliwinski, and G. Kruk, “LHC Software Architecture [LSA] -- Evolution Toward LHC Beam Commissioning”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper WOPA03, pp. 307-309.
- B. Di Girolamo et al., “The Monitoring of the Effects of Earth Surface Inclination With the Precision Laser Inclinometer for High Luminosity Colliders”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 210-212.
- R. Ollier, P. Alexandre, R. Ben El Fekih, and L. S. Nadolski, “Design and Commissioning of a Multipole Injection Kicker for the SOLEIL Storage Ring”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3525-3528.
- J. P. S. Martins, S. Farina, J. H. Lee, and D. P. Piso, “MicroTCA.4 Integration at ESS: From the Front-End Electronics to the EPICS OPI”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1692-1694.
- P. Bellomo et al., “Status of the PEP-II B-Factory High Energy Ring”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP128G, pp. 466-470.
- D. McGinnis, V. K. Bharadwaj, and J. Marriner, “Coupled Bunch Dipole Mode Measurements of Accelerating Beam in the Fermilab Booster”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1255-1258.
- S. Mitsunobu et al., “High Power Test of the Input Coupler for KEKB SC Cavity”, in Proc. 7th Int. Conf. RF Superconductivity (SRF'95), Gif-sur-Yvette, France, Oct. 1995, paper SRF95F36, pp. 735-739.
- O. Capatina et al., “Overview of the Large Hadron Collider Cryo-magnets Logistics”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPCH181, pp. 3221-3223.
- W. T. Kitka et al., “Heating Unit Controller at NSRC SOLARIS”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3885-3887.
- R. Tavcar, J. Dedic, E. Erjavec, R. Modic, M. Liu, and C. X. Yin, “Fast Machine Interlock Platform for Reliable Machine Protection Systems”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 4119-4121.
- R. J. Jim?®nez Estupi???ín et al., “Enhancing the Detector Control System of the CMS Experiment with Object Oriented Modelling”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 145-148.
Back to search