JaCoW Logo

Reference Search

Warning
Some papers titles are all uppercase, you must correct this before using this reference.

The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	Y. T. Huang, C.-C. Chang, J.-R. Chen, G.-Y. Hsiung, S-N. Hsu, and H. P. Hsueh, “Baking Tests and Results of A1050 Diamond Edge Gasket”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPFI071, pp. 3463-3465. 
[n]	Y.-H. Liu et al., “The HV Withstands Test for In Vacuum Booster Kicker”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWA043, pp. 765-767. 
[n]	P. Songsiriritthigul et al., “Improvement of BPM System for the Siam Photon Source”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPR053, pp. 903-905. 
[n]	C. S. Chen et al., “Reduction of Conductive EMI Noise Resulted from the Commercial Power Supply”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPD058, pp. 3644-3646. 
[n]	W. H. Hwang, H. G. Kim, W. W. Lee, S. J. Park, and Y. J. Han, “Measurement of Beam Energy Drift in PLS 2.5 GeV Linac”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper TUP11010, pp. XX-XX. 
[n]	L. Liu, L. Kang, X. J. Nie, and H. Qu, “DESIGN OF CSNS R DUMP WINDOW”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPFI026, pp. 3354-3355. 
[n]	S. Chemli et al., “New Coordination Tools to Prepare Programmed Stops in the LHC and its Injectors”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 200-203. doi:10.18429/JACoW-IPAC2018-MOPMF044
[n]	C.-C. Chang, C. K. Chan, C. L. Chen, J.-R. Chen, G.-Y. Hsiung, and S-N. Hsu, “Manufacturing and Welding Process of Straight Section of Aluminum Alloy UHV Chambers for Taiwan Photon Source”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPD019, pp. 2537-2539. 
[n]	J. T. Morris, S. Binello, T. S. Clifford, R. C. Lee, and C. Whalen, “Storage Techniques for RHIC Accelerator Data”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P1_074. 
[n]	Y.-H. Liu et al., “TPS SR Kicker Prototype Installation Status”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC147, pp. 3230-3232. 
[n]	Y. T. Huang et al., “Development of a Feedthrough with Small Reflection for the TPS BPM”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPS029, pp. 1593-1595. 
[n]	C. Engblom et al., “Overview of Some Feedback & Control Systems at Synchrotron Soleil”, in Proc. PCaPAC'16, Campinas, Brazil, Oct. 2016, pp. 132-136. doi:10.18429/JACoW-PCAPAC2016-FRFMPLIO03
[n]	R. Bartolini, R. T. Fielder, E. Koukovini-Platia, and G. Rehm, “Multi-Bunch Instabilities Measurement and Analysis at the Diamond Light Source”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4485-4488. doi:10.18429/JACoW-IPAC2017-THPVA028
[n]	Y. T. Huang, C.-C. Chang, C. L. Chen, J.-R. Chen, G.-Y. Hsiung, and H. P. Hsueh, “Design and Manufacture of TPS BPM Diamond-Edge Gasket”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPD023, pp. 2549-2551. 
[n]	Y. Yoshida, K. Sakaue, and M. Washio, “Study on Electron Microbeam Generation for MRT Based on Photo-cathode RF-Gun”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPR049, pp. 4086-4088. 
[n]	L. S. Nadolski, “Methods and Tools to Simulate and Analyse Non-linear Dynamics in Electron Storage Rings”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUXB01, pp. 937-941. 
[n]	V. Kiselev and V. Smaluk, “Experimental Study of Impedances and Instabilities at the VEPP-4M Storage Ring”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP09F, pp. 1005-1007. 
[n]	Y. C. Yang, C. K. Chan, J.-R. Chen, C. M. Cheng, and G.-Y. Hsiung, “Design of the Water-Cooling System for the Vacuum System of the TPS Storage Ring”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPD022, pp. 2546-2548. 
[n]	Y. G. Son, S. D. Jang, J. S. Oh, and S. J. Park, “Study on the Characteristics of the Sub-Nano Second Pulse Generator for a PLS Electron Gun”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper TUP11005, pp. XX-XX. 
[n]	L. H. Wu, J.-R. Chen, C. M. Cheng, G.-Y. Hsiung, C. S. Huang, and Y. T. Huang, “A Study of Vacuum Pressure in TPS Cells”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPD024, pp. 2552-2554. 
[n]	J. Da Silva Castro et al., “Retractable Absorber (Mask) and White Beam Imager Diagnostic for Canted Straight Section”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 45-47. doi:10.18429/JACoW-MEDSI2018-TUPH11
[n]	M. Tilmont et al., “Cryo-Ready Undulator U15: Passing SOLEIL's 2 Meters Threshold in Useful Magnetic Length”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 249-250. doi:10.18429/JACoW-MEDSI2016-TUPE40
[n]	E. Ezura, K. Akai, H. Hayano, M. Ono, M. Suetake, and T. Takashima, “The Low-Level RF System for TRISTAN Main Ring”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1660-1663. 
[n]	S. D. Jang, Y. G. Son, and J. S. Oh, “Perveance Monitor for Measuring an 80-MW Klystron Characteristics”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper THP16021, pp. XX-XX. 
[n]	X. J. Nie, L. Kang, L. Liu, and H. Qu, “Anti-earthquake Structural Design for CSNS Beam Dump”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPFI028, pp. 3358-3360. 
[n]	X. Guan, “The Compact Pulsed Hadron Source Status”, in Proc. HIAT'12, Chicago, IL, USA, Jun. 2012, paper TUA03, pp. 112-114. 
[n]	J. M. Brennan et al., “A High Harmonic Cavity for Controlled Longitudinal Phase Space Dilution in the AGS”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1006-1009. 
[n]	K. Sakaue, K. Tamai, M. Washio, and J. Urakawa, “Design of a Chirping Cell Attached RF Gun for Ultrashort Electron Generation”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC058, pp. 1129-1131. 
[n]	Y. Koshiba, T. Aoki, K. Sakaue, M. Washio, T. Takatomi, and J. Urakawa, “Development of an RF Electron Gun for Ultra-Short Bunch Generation”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPD058, pp. 1536-1538. 
[n]	P. A. Lin, K. H. Hsu, C. K. Kuan, C.-S. Lin, H. Y. Lin, and I. C. Sheng, “Manufacturing and Inspecting Supporting Tables for Front End in Taiwan Photon Source”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 4031-4033. doi:10.18429/JACoW-IPAC2014-THPRI108
[n]	D. E. Kim et al., “Stretched Wire Flip Coil System for Magnetic Field Measurements”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPKF049, pp. 1714-1716. 
[n]	S. X. Zheng et al., “Primary Design of DTL for CPHS”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPD048, pp. 795-797. 
[n]	X. J. Ge, L. Liu, B. L. Qian, J. Zhang, and H. H. Zhong, “Influences of the Inner-conductor on Microwave Characteristics in an L-band Relativistic Backward-wave Oscillator”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC132, pp. 388-390. 
[n]	L. Liu, L. Kang, X. J. Nie, and H. Qu, “STUDY ON STRUCTURE AND THERMAL ANALYSIS OF CSNS R BEAM DUMP”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPFI027, pp. 3356-3357. 
[n]	I. S. Park et al., “Fabrication of ICHIRO Nine-cell Cavities in PAL for STF of KEK”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMN060, pp. 2173-2175. 
[n]	K. T. Tavakoli et al., “Mechanical Engineering Solutions for COXINEL Project”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 299-303. doi:10.18429/JACoW-MEDSI2016-WECA06
[n]	Q. Z. Xing et al., “Present Status of the 3 MeV Proton Linac at Tsinghua University”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper THPP137, pp. 1182-1184. 
[n]	E. Koukovini-Platia and G. Rumolo, “Review of the Transverse Impedance Budget for the CLIC Damping Rings”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1701-1703. doi:10.18429/JACoW-IPAC2014-TUPRI057
[n]	J. A. D. Flowerdew, D. J. Kelliher, S. Machida, and S. L. Sheehy, “Simulating Quasi-Integrable Optics with Space Charge in the IBEX Paul Trap”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2040-2043. doi:10.18429/JACoW-IPAC2022-WEPOTK007
[n]	Q. Yuan, M. Gu, G. Y. Jiang, and R. Wang, “The Feed-forward Control Design of Correction Coil Power Supply for SSRF EPU”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWA032, pp. 2199-2201. 
[n]	T.-Y. Lee, H.-S. Lee, and S. Shin, “Schemes for the Accelerator-driven System”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1995-1997. doi:10.18429/JACoW-IPAC2016-TUPOY042
[n]	B. F. Feng, S. E. C. Csorna, G. E. G. Gabella, and T. R. Sashalmi, “Electron Beam Diagnostics Using Diffraction Radiation”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper TUPOS58, pp. XX-XX. 
[n]	K.-H. Park, J. Choi, C. W. Chung, S.-H. Jeong, B.-K. Kang, and D. E. Kim, “Implementation of High Precision Magnet Power Supply using the DSP”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper THPMA024, pp. 666-668. 
[n]	J. A. D. Flowerdew, D. J. Kelliher, S. Machida, and S. L. Sheehy, “Exploring Accelerators for Intense Beams with the IBEX Paul Trap”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1980-1983. doi:10.18429/JACoW-IPAC2021-TUPAB234
[n]	S. Sakanaka et al., “Status of the RF System for the 6.5 GeV Synchrotron Light Source PF-AR”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAT009, pp. 1168-1170. 
[n]	J. F. Esteban Müller, Y. Levinsen, N. Milas, A. P. Shishlo, A. P. Zhukov, and C. Z. Zlatanov, “Evaluating PyORBIT as Unified Simulation Tool for Beam-Dynamics Modeling of the ESS Linac”, in Proc. HB'23, Geneva, Switzerland, Oct. 2023, pp. 102-105. doi:10.18429/JACoW-HB2023-TUC2C2
[n]	D. Trbojevic et al., “Alignment and Survey of the Elements in RHIC”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAA09, pp. 2099-2101. 
[n]	P. F. Ma et al., “Conceptual Design of a Drift Tube LINAC for Proton Therapy”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1182-1185. doi:10.18429/JACoW-IPAC2018-TUPAL073
[n]	V. A. Moiseev and S. E. Bragin, “VARIOUS MATRIX FORMALISM TO DESIGN ION LINEAR ACCELERATORS”, in Proc. RuPAC'08, Zvenigorod, Russia, Sep.-Oct. 2008, paper MOAPH23, pp. XX-XX. 
[n]	H.-G. Lee et al., “Design and Fabrication of Arups U6 Undulator at PLS”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper THPMA117, pp. 806-808. 
[n]	K. R. Kim et al., “Reliability and Maintenance of PLS Linac Mechanical Systems”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TH475, pp. 770-772. 
[n]	J. Y. Huang, D. H. Jung, K. H. Kim, S. H. Nam, M. Yoon, and I. S. Ko, “Beam-Based Offset Calibration of the PLS BPM”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9P082, pp. 2107-2109. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search