JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	D. Berkaev et al., “VEPP-2000 ELECTRON-POSITRON COLLIDER COMMISSIONING”, in Proc. Factories'08, Novosibirsk, Russia, Apr. 2008, paper TUACH03, pp. XX-XX. 
[n]	S. Nakamura et al., “High-quality Proton Beam Obtained by Combination of Phase Rotation and the Irradiation of the Intense Short-pulse Laser”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH155, pp. 3158-3160. 
[n]	T. Kachel et al., “First Experiments with Femtosecond Soft X-Ray Pulses at BESSY”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper TUPPH063, pp. XX-XX. 
[n]	K. W. Shepard, “Development of a Very-Low-Velocity Superconducting Linac”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1812-1815. 
[n]	H. Lim, D. H. Jeong, M. W. Lee, M. J. Lee, S. W. Shin, and J. Yi, “Design of a Radiotherapy Machine using the 6 MeV C-Band Standing-Wave Accelerator”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1921-1923. doi:10.18429/JACoW-IPAC2016-TUPOY008
[n]	D. R. S. Di Calafiori et al., “The CMS ECAL Detector Control System”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THA002, pp. 633-635. 
[n]	M. Gourber-Pace, G. Kruk, and M. Misiowiec, “Status Report of the Measurement Service for the CERN Accelerator Logging”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP106, pp. 325-327. 
[n]	M. Fedorov et al., “In-Place Technology Replacement of a 24x7 Operational Facility: Key Lessons Learned and Success Strategies From the NIF Control System Modernization”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 949. doi:10.18429/JACoW-ICALEPCS2019-WEDPL01
[n]	R. C. Niemann et al., “APS Storage Ring Vacuum System Development”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 29-32. 
[n]	C. Yao and N. P. Di Monte, “Initial Performance Results of the APS P0 Feedback System”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper RPPA15, pp. 550-552. 
[n]	G. Maire, A. Kehrli, S. Ravat, and H. Coppier, “The Detector Safety System of NA62 Experiment”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC056, pp. 222-225. 
[n]	G. W. Foster, “Experience with Permanent Magnets in the Fermilab 8 GeV Line and Recycler Ring”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUX02A, pp. 189-193. 
[n]	P. Chen and D. Yu, “Simulation Results of RF Coupler Controllable by Dielectric Fluid”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP129, pp. 1073-1075. 
[n]	P. G. O, T. A. Butler, M. T. Lynch, K. F. McKenna, M. B. Pongratz, and T. J. Zaugg, “A Linear Accelerator in Space - the Beam Experiment Aboard Rocket”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TH454, pp. 739-742. 
[n]	C. Boucly, J. Borburgh, C. Bracco, E. Carlier, N. Magnin, and N. Voumard, “Operational Experience with a PLC Based Positioning System for a LHC Extraction Protection Element”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC068, pp. 254-257. 
[n]	J. Bobnar and K. Zagar, “BLED: A Top-down Approach to Accelerator Control System Design”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper TUAAULT03, pp. 537-539. 
[n]	R. B. Shurter, T. Cote, and J. D. Gilpatrick, “Analog Front-End Electronics for Beam Position Measurement on the Beam Halo Measurement”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH071, pp. 1378-1380. 
[n]	P. M. Markovich, K. W. Shepard, and G. P. Zinkann, “Status of RF Superconductivity at Argonne National Laboratory”, in Proc. SRF'87, Lemont, IL, USA, Sep. 1987, paper SRF87D10, pp. XX-XX. 
[n]	J. Campmany, F. Becheri, J. Marcos, V. Massana, R. Petrocelli, and L. Ribo, “Upgrade of Magnetic Measurements Laboratory at ALBA Synchrotron”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 211-213. doi:10.18429/JACoW-MEDSI2018-WEPH06
[n]	P. Ninin et al., “Refurbishing of the CERN PS Complex Personnel Protection System”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC059, pp. 234-237. 
[n]	C. David, J. Jacob, A. Panzarella, J. P. Perrine, and J. L. Revol, “Construction of a Third RF Acceleration Unit for the ESRF Storage Ring”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP028L, pp. 1970-1972. 
[n]	K. W. Shepard, “Development of Superconducting Intermediate Velocity Cavities for the U.S. RIA Project”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper WEO08, pp. 539-543. 
[n]	S. Ravat, L. Deront, A. Kehrli, and X. Pons, “A Safety System for Experimental Magnets Based on CompactRIO”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC053, pp. 210-213. 
[n]	H. Jones, “Development of BPM electronics for TRIUMF’s BL4N”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 733-736. doi:10.18429/JACoW-IBIC2025-WEPMO08
[n]	J. J. Jamroz, J. Forsberg, V. H. Hardion, V. Martos, and D. P. Spruce, “Timing System at MAX IV - Status and Development”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 984-987. doi:10.18429/JACoW-ICALEPCS2015-WEPGF120
[n]	K. Egawa and T. M. Taylor, “Conceptual Design of a 5 T/mm Quadrupole for Linear Collider Final Focus”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 360-363. 
[n]	J. Gayde et al., “Alignment and Monitoring Systems for Accelerators and Experiments Based on BCAM - First Results and Benefits of Systems Developed for ATLAS, LHCb and HIE-ISOLDE”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1983-1985. doi:10.18429/JACoW-IPAC2018-WEPAF067
[n]	T. Ladzinski et al., “The LHC Access System”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEP102, pp. 600-602. 
[n]	T. Gingold, G. Daniluk, M. Rizzi, J. Serrano, and T. W, “HydRA: A System-on-Chip to Run Software in Radiation-Exposed Areas”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 217-221. doi:10.18429/JACoW-ICALEPCS2023-MO4AO02
[n]	A. V. Aleksandrov, I. Hofmann, and J.-M. Lagniel, “Summary Report of the Working Group B: Beam Dynamics in High Intensity Linacs”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper CPL02, pp. 485-486. 
[n]	G. Wustefeld, J. Feikes, K. Holldack, and P. Kuske, “Sub-Picosecond Electron Bunches in the BESSY Storage Ring”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT051, pp. 1954-1956. 
[n]	H. Kapitza, P. G?Âttlicher, N. Heidbrook, and H. Schlarb, “FEL Disturbance by Ambient Magnetic Field Changes”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH012, pp. 74-76. 
[n]	R. B. Agustsson, J. J. Hartzell, and S. Storms, “Inductively Coupled Pulsed Energy Extraction System for 2G Wire-based Magnets”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper WEOCA2, pp. 725-727. 
[n]	R. B. Agustsson et al., “Normal Conducting Radio Frequency x-band Deflecting Cavity Fabrication and Validation”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPC046, pp. 3389-3391. 
[n]	E. Z. Barzi et al., “An Innovative Nb3Sn Film Approach and Its Potential for SRF Applications”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 513-515. doi:10.18429/JACoW-LINAC2018-TUPO076
[n]	M. Belgroune et al., “Status of the ALBA Project”, in Proc. FLS'06, Hamburg, Germany, May 2006, paper POS01, pp. XX-XX. 
[n]	M. Schneider, A. Adelmann, N. Pogue, and L. Stingelin, “Suppression of RF Radiation Originating from the Flattop Cavity in the PSI Ring Cyclotron”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 348-350. doi:10.18429/JACoW-Cyclotrons2016-THP18
[n]	J. Pasternak and L. J. Jenner, “Design of a Rapid Cycling Synchrotron for the Final Stage of Acceleration in a Common Proton Driver for a Neutrino Factory and a Spallation Neutron Source Based on Megawatt Upgrades to ISIS”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPS103, pp. 2751-2753. 
[n]	J. Wei, W. Fischer, V. Ptitsin, R. Ostojic, and J. Strait, “Interaction Region Local Correction for the Large Hadron Collider”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THA143, pp. 2921-2923. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search