JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	R. Risler, S. Banerian, R. C. Emery, I. Kalet, and G. E. Laramore And D, “Recent Improvements And Operational Status Of The Seattle Clinical Cyclotron Facility”, in Proc. Cyclotrons'07, Giardini-Naxos, Italy, Oct. 2007, pp. 134-136. 
[n]	K. Katagiri, T. Furukawa, and K. Noda, “Numerical Analysis on the Gain-reduction Characteristics of Multi-wire Proportional Chambers”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper TUPB69, pp. 502-504. 
[n]	A. I. Sukhanov et al., “Characterization of SSR1 Cavities for PIP-II Linac”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 1120-1123. doi:10.18429/JACoW-SRF2019-THP090
[n]	G. Dutto et al., “The Upgrading of the TRIUMF Facility to 500 muA Operation”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 326-329. 
[n]	B. Comiskey et al., “Progress toward dual-pulse operation at the Proton Storage Ring of LANSCE”, in Proc. NAPAC'25, Sacramento, California, USA, Aug. 2025, pp. 558-562. doi:10.18429/JACoW-NAPAC2025-TUP081
[n]	M. Petrichenkov et al., “ACCELERATOR MASS-SPECTROMETER FOR SIBERIAN DIVISION OF RAS”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper THCP11, pp. XX-XX. 
[n]	S. Benedetti, G. Bellodi, J.-B. Lallement, and A. M. Lombardi, “Redesign of CERN Linac3 RFQ for Lead 29+”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 818-821. doi:10.18429/JACoW-LINAC2018-THPO057
[n]	B. Feinberg and I. G. Brown, “The Superhilac Heavy Ion Intensity Upgrade”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 860-863. 
[n]	S. Kedia, R. Ahuja, R. Kumar, and R. Mehta, “Design Validation of a Chopping and Deflecting System for the High Current Injector at IUAC”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 869-871. doi:10.18429/JACoW-LINAC2018-THPO080
[n]	S. Braccini, “Compact Medical Cyclotrons and their use for Radioisotope Production and Multi-disciplinary Research”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 229-234. doi:10.18429/JACoW-Cyclotrons2016-TUD01
[n]	A. I. Sukhanov et al., “Upgrade of the Fermilab Spoke Test Cryostat for Testing of PIP-II 650 MHz 5-Cell Elliptical Cavities”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 1124-1128. doi:10.18429/JACoW-SRF2019-THP091
[n]	A. S. Parfenova, C. Baumgarten, J. M. Humbel, A. C. Mezger, and A. V. Petrenko, “Measurements of the Beam Phase Response to Correcting Magnetic Fields in PSI Cyclotrons”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1271-1273. doi:10.18429/JACoW-IPAC2016-TUPMR019
[n]	D. Boussard, L. Evans, J. Gareyte, T. Linnecar, W. Mills, and E. J. N. Wilson, “Acceleration and Storage of a Dense Single Bunch in the CERN SPS”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3484-3487. 
[n]	M. H. Awida et al., “On the Design of Higher Order Mode Antenna for LCLS II”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP046, pp. 161-164. 
[n]	D. V. Neuffer, D. R. Broemmelsiek, A. V. Burov, and S. Nagaitsev, “Bunched Beam Cooling in the Fermilab Recycler”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FPAE009, pp. 1153-1155. 
[n]	M. E. Inman et al., “Electropolishing of Niobium SRF Cavities in Eco-Friendly Aqueous Electrolytes Without Hydrofluoric Acid”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper MOPB101, pp. 390-393. 
[n]	K. Evans, “The EPICS Process Variable Gateway -- Version 2”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P1_033. 
[n]	E. Haebel, “Couplers, Tutorial and Update”, in Proc. SRF'91, Hamburg, Germany, Aug. 1991, paper SRF91D05, pp. XX-XX. 
[n]	R. T. Sanders et al., “The AGS Booster High Frequency RF System”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 681-684. 
[n]	D. Xie, J. Y. Benitez, C. M. Lyneis, D. S. Todd, and W. Lu, “Recent production of intense high charge ion beams with VENUS”, in Proc. ECRIS'16, Busan, Korea, Aug.-Sep. 2016, pp. 141-145. doi:10.18429/JACoW-ECRIS2016-THAO01
[n]	L. T. Sun et al., “ECRIS Developments Towards Intense High Brightness Highly-charged Ion Beams”, in Proc. HB'14, East Lansing, MI, USA, Nov. 2014, paper THO2AB01, pp. 363-368. 
[n]	S. A. Belomestnykh et al., “Commissioning of the 112 MHz SRF Gun and 500 MHz Bunching Cavities for the CeC PoP Linac”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3597-3599. doi:10.18429/JACoW-IPAC2015-WEPWI049
[n]	V. A. Lebedev and A. V. Burov, “Transverse Instabilities of Coasting Beams With Space Charge”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper WGA05, pp. 58-62. 
[n]	A. Pollard, D. Dunning, E. Snedden, and W. Okell, “Machine learning for laser pulse shaping”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4495-4498. doi:10.18429/JACoW-IPAC2023-THPL034
[n]	G. Lawler, J. Parsons, and J. Rosenzweig, “Cryogenic Testing Infrastucture at UCLA”, presented at the IPAC'23, Venice, Italy, May 2023, paper WEPM098, unpublished. 
[n]	S. Benedetti, “New Trends in Proton and Carbon Therapy Linacs”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 666-671. doi:10.18429/JACoW-LINAC2018-TH1P03
[n]	M. Schaer et al., “Study of a C-band Standing-wave Gun for the SwissFEL Injector”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 698-700. doi:10.18429/JACoW-IPAC2014-MOPRI043
[n]	A. V. Burov and V. A. Lebedev, “Suppression of Transverse Instability by a Digital Damper”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH065, pp. 2934-2936. 
[n]	B. Feinberg and I. G. Brown, “The SuperHILAC Upgrade Project”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper WE3-9, pp. 263-265. 
[n]	S. Hoekstra, K. Leung, B. Prichard, and R. Thomae, “Improvements On H-minus Sources For Spallation Neutron Source Application”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP6A15, pp. 1604-1606. 
[n]	P. Junior, J. Dehen, and M. Malouschek, “Matching Fingers in the Four Rod RFQ”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 970-973. 
[n]	C. Yao et al., “Recent Improvement of the APS Booster Synchrotron”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPEA072, pp. 252-254. 
[n]	C. Yao et al., “High Charge Development of the APS Injector for an MBA Upgrade”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1828-1830. doi:10.18429/JACoW-IPAC2015-TUPJE079
[n]	V. Ptitsin and Yu. Shatunov, “Siberian Snakes for Electron Storage Rings”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9P022, pp. 3500-3502. 
[n]	K. S. Premo, T. T. Arkan, Y. O. Orlov, and N. Solyak, “LCLS-II Fundamental Power Coupler Mechanical Integration”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper THPB086, pp. 1340-1342. 
[n]	D. A. Dohan and K. G. Standing, “Analysis of Protein Content in Grain by Proton Activation”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper G-06, pp. 511-513. 
[n]	C. Hovater et al., “Commissioning the JLab LERF Cryomodule Test Facility”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 973-977. doi:10.18429/JACoW-SRF2019-THP049
[n]	F. Furuta et al., “RF Test Result of a BNL N-Doped 500 MHz B-Cell Cavity at Cornell”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2440-2442. doi:10.18429/JACoW-IPAC2018-WEPMF036
[n]	R. Zennaro, M. Bopp, A. Citterio, R. Reiser, and T. Stapf, “C-band RF Pulse Compressor for SwissFEL”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPFI059, pp. 2827-2829. 
[n]	B. Dwersteg, “High Power Couplers”, in Proc. SRF'89, Tsukuba, Japan, Aug. 1989, paper SRF89E02, pp. XX-XX. 
[n]	J. F. Tooker et al., “System Engineering in the SSC Linac”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TU4-12, pp. 326-328. 
[n]	S. Belomestnykh et al., “Commissioning of the Superconducting RF Cavities for the CESR Luminosity Upgrade”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOP135, pp. 980-982. 
[n]	B. Hong, R. Akre, and V. Pacak, “LLRF System Upgrade for the SLAC Linac”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEA061, pp. 1473-1475. 
[n]	S. Redaelli, R. W. Assmann, M. Donze, R. Losito, and A. Masi, “LHC Collimator Controls for a Safe LHC Operation”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMU020, pp. 1104-1107. 
[n]	T. Yanagisawa, H. Hara, K. Kanaoka, K. Okihira, and K. Sennyu, “Development for Mass Production of Superconducting Cavity by MHI”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2876-2878. doi:10.18429/JACoW-IPAC2015-WEPMA048
[n]	Y. L. Yang et al., “Commissioning of the HLS Analog TFB System”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6REP083, pp. 4150-4152. 
[n]	C. Youngman, B. Fernandes, P. Gessler, J. Coughlan, E. Motuk, and M. Zimmer, “Electronics Developments for High Speed Data Throughput and Processing”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC086, pp. 778-781. 
[n]	I. V. Gonin, T. N. Khabiboulline, A. Lunin, O. V. Prokofiev, N. Solyak, and V. P. Yakovlev, “TTF-III Coupler Modification for CW Operation”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP053, pp. 174-176. 
[n]	S. Usherovich et al., “A novel fiber-optic beam monitor”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3890-3892. doi:10.18429/JACoW-IPAC2023-WEPM134
[n]	W. J. Yang, L. Z. Ma, E. M. Mei, D. S. Ni, B. M. Wu, and W. Wu, “Measurement Facility and Test Results for FRIB Superconducting Magnets at IMP”, in Proc. HIAT'18, Lanzhou, China, Oct. 2018, pp. 33-36. doi:10.18429/JACoW-HIAT2018-MOPB02
[n]	C. Hessler et al., “Results from the HiRadMat Primary Beam Line Commissioning”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPS053, pp. 3547-3549. 
[n]	J. Dehen, W. Barth, H. Deitinghoff, and A. Schempp, “Transport of Ions in a RFQ Accelerator”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 967-970. 
[n]	L. Froehlich, G. Cautero, D. Di Giovenale, D. Giuressi, and R. H. Menk, “The Machine Protection System for FERMI@Elettra”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper THPC10, pp. 667-670. 
[n]	J. P. Holzbauer et al., “Active Microphonics Compensation for LCLS-II”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2687-2689. doi:10.18429/JACoW-IPAC2018-WEPML007
[n]	R. Bossart et al., “The LEP Injector Linac”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TH412, pp. 614-616. 
[n]	J. Staples, S. M. Lidia, R. A. Rimmer, and S. Virostek, “The LBNL Femtosource 10 kHz Photoinjector”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAB023, pp. 2092-2094. 
[n]	J. Kirchgessner, “The Use of Superconducting RF for High Current Applications”, in Proc. SRF'93, Newport News, VA, USA, Oct. 1993, paper SRF93E01, pp. XX-XX. 
[n]	M. Koratzinos et al., “TLEP: High-performance Circular e+e- Collider to Study the Higgs Boson”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPME040, pp. 1658-1660. 
[n]	G. B. Shen, P. Chu, M. R. Kraimer, and J. Wu, “Design of Accelerator Online Simulator Server using Structured Data”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEB024, pp. 2737-2739. 
[n]	G. Shen, M. A. Davidsaver, and M. R. Kraimer, “EPICS V4 in Python”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPKS021, pp. 830-832. 
[n]	G. B. Shen, M. R. Kraimer, and L. Yang, “Prototype of Beam Commissioning Environment and its Applications for NSLS-II”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEB026, pp. 2740-2742. 
[n]	G. Turemen et al., “Current Status of the SANAEM RFQ Accelerator Beamline”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3952-3955. doi:10.18429/JACoW-IPAC2015-THPF103
[n]	S. Benedetti, A. Grudiev, and A. Latina, “Design of a 750 MHz IH Structure for Medical Applications”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 240-243. doi:10.18429/JACoW-LINAC2016-MOPLR049
[n]	D. Dale et al., “Custom Electronic Modules for the TRIUMF/ISAC Control System”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P3_053. 
[n]	R. Gerig, M. May, C. Moore, S. Ohnuma, S. Pruss, and F. Turkot, “Design, Installation, and Commissioning of the Dzero Overpass at the Fermilab Main Ring”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1666-1669. 
[n]	V. Kiselev, E. Levichev, I. Protopopov, V. Sajaev, and V. V. Smaluk, “Non-Linear Beam Dynamics Experiments at VEPP-4M Ring”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP010L, pp. 896-898. 
[n]	J. L. Belmont, J. M. De Conto, A. Fontenille, G. Hadinger, M. Laamyem, and R. Meunier, “An Experimental Method of Aberration Correction for High Resolution Mass Spectrometers”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP05D, pp. 2312-2314. 
[n]	U. Amaldi et al., “LIBO - A 3 GHz Proton Linac Booster of 200 MeV for Cancer Treatment”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TU4098, pp. 633-635. 
[n]	C. M. Bhat and N. V. Mokhov, “Radiation Levels Around the Fermilab Main Injector Extraction Septa”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 3P056, pp. 3672-3674. 
[n]	L. Reginato, “The Advanced Test Accelerator (ATA), a 50-MeV, 10-kA Induction Linac”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2970-2975. 
[n]	P. N. Koufalis and M. Liepe, “Insights into the Role of C, N, and O Introduced by Low Temperature Baking on Niobium Cavity Performance”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2455-2457. doi:10.18429/JACoW-IPAC2018-WEPMF041
[n]	A. Macridin, J. F. Amundson, and E. G. Stern, “Numerical simulations of transverse modes in Gaussian bunches with space charge”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 575-578. doi:10.18429/JACoW-IPAC2015-MOPMA017
[n]	D. Reagan, “Stanford Accelerator Control Computer”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 862-864. 
[n]	T. Korhonen et al., “EPICS Version 4 Progress Report”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUCOCB04, pp. 956-959. 
[n]	T. Hays, P. Barnes, H. Padamsee, and J. Sears, “Performance of a High RRR Russian Nb 1.3 GHz TESLA Multicell Cavity”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper SRF95C15, pp. 441-442. 
[n]	P. N. Koufalis, M. Liepe, J. T. Maniscalco, and T. E. Oseroff, “Experimental Results on the Field and Frequency Dependence of the Surface Resistance of Niobium Cavities”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2451-2454. doi:10.18429/JACoW-IPAC2018-WEPMF039
[n]	E. Haebel, “Conditions for SC Cavity Matching and their Relations to the Robinson Stability Criterion”, in Proc. SRF'89, Tsukuba, Japan, Aug. 1989, paper SRF89G07, pp. XX-XX. 
[n]	J. A. Clarke et al., “An Updated Assessment of a Medical Cyclotron as an Injector for an Energy Upgrade”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TU4097, pp. 630-632. 
[n]	B. F. Viaud, W. Kozanecki, C. O, J. M. Thompson, and M. Weaver, “Monitoring of Interaction-point Parameters using the 3-dimensional Luminosity Distribution Measured at PEP-II”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPLS026, pp. 598-600. 
[n]	F. R. Osswald et al., “Transfer of RIB's between ISOL Target and Experiment Hall at SPIRAL 2”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPEA010, pp. 85-87. 
[n]	C. W. Horrabin, “A Digital Data Telemetry System for Terminal to Ground Communication in a 10 MV Van de Graaff”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1179-1182. 
[n]	W. H. Hwang et al., “S-band High Power RF System for 10 GeV PAL-XFEL”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPC057, pp. 3419-3421. 
[n]	T. Linnecar and W. Scandale, “A Transverse Schottky Noise Detector for Bunched Proton Beams”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2147-2150. 
[n]	G. S. Bauer, W. E. Fischer, U. Rohrer, and U. Schryber, “Commissioning of the 1 MW Spallation Neutron Source SINQ”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9B004, pp. 3785-3787. 
[n]	D. M. Dykes and C. W. Horrabin, “DIAMOND Low Power RF System”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP015L, pp. 1949-1951. 
[n]	O. Piquet et al., “RF Conditionning of the Spiral 2 CW RFQ”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4114-4117. doi:10.18429/JACoW-IPAC2017-THPIK005
[n]	E. Haebel, “Fundamental and Higher Order Mode Couplers on Superconducting rf Cavities for Electron Storage Rings”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3345-3348. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search